Related
Hey, how do I keep screen light on, while in call?
You know... to dial extensions etc.
Thanks!
Try Kaiser Tweak (its stickied in the general kaiser forum). It has that & a bunch of other usefull tweaks, best of all its free...
ok, got it, installed, now... hehe, what to tweak to get that done?
i really need that screen to be on all the time while in call....
cokester said:
ok, got it, installed, now... hehe, what to tweak to get that done?
i really need that screen to be on all the time while in call....
Click to expand...
Click to collapse
Hey just out of curiosity.. why do you need that screen on, why so important.
I'm completely the opposite hehe.
Harkadenn said:
Hey just out of curiosity.. why do you need that screen on, why so important.
I'm completely the opposite hehe.
Click to expand...
Click to collapse
As stated about about dialing extension and things. For instance when I go to pay a bill over the phone. I dial the number .. it asks me to input my account number .. Look at the screen and its black and I have to hit the power button to bring it back to life to input the number .. Then I have to do the same thing when inputing my credit card number and etc etc.
It just get a little annoying for those that input numbers over an automated system. From some people its not a problem and the powering off the screen really quick is nice ..
I belive the setting on Kaiser Tweak was Fast Sleep. You have the ability to change that and not effect the devices normal sleep setting.
Is there a way to lock onscreen phone buttons?
Everytime someone calls, and diamond is in my pocket I either accept or reject call when trying to get it out of pocket.
So can I dectivate touch screen during incoming call?
Is there any tweak for this?
Greets guys
dont own a diamond but a quickfix...get bigger jeans.
No way... too big balls will bounce
resolved!!!
the fastest way to solve your problem is to install s2u2 (slide to unlock) newest version is 1.05 what i know...
so with the right settings when incoming call, you'll need to slide then answer/reject call or setup slide to answer or other.
its great i LOVE IT..
I just installed it... then uninstalled it 5 mins later because it looks GHASTLY!!
To lock the touch screen buttons you simply hold down the End Call button for a few seconds. Or is it the physical buttons that you're trying to lock?
You didn't get it
I want touch screen buttons to be locked DURING incoming call to be sure i wont press them when trying to put it out of pocket.
Even if diamond is locked, when phonecall screen appears, those buttons are ACTIVE and that is baaaaad
and S2U2.... doesn't work!!!
When incoming call, original diamond call screen appears and buttons are ACTIVE - su2u DOES NOT lock device during the call although there's option called 'slide to answer'
lookass said:
You didn't get it
I want touch screen buttons to be locked DURING incoming call to be sure i wont press them when trying to put it out of pocket.
Even if diamond is locked, when phonecall screen appears, those buttons are ACTIVE and that is baaaaad
and S2U2.... doesn't work!!!
When incoming call, original diamond call screen appears and buttons are ACTIVE - su2u DOES NOT lock device during the call although there's option called 'slide to answer'
Click to expand...
Click to collapse
You are right: I do not get you.
At least I do not see your point. You want to have the phone locked during incoming calls? - how senseless is that. Especially in that moment I want to have it unlocked to be able to accept it. That is the way all my phones worked.
What do you do, if you get a call and have a your cell in the pocket? I never encountered such problems...
Jeeeeeeeezzzzzzzz !!!
In Diamond one can answer a call in two ways:
1. press onscreen button
2. press hardware button
Onscreen button can be pressed accidentaly while taking out of pocket, pouch or whatever.
So: All i want is to have onscreen buttons INACTIVE while hardware buttons ACTIVE so I can answer call ONLY by pressing answer HARDWARE button.
Tapping onscreen button will do NO ACTION.
Hope now everything is clear, cause my english isn't very good
^^and you made a joke when i offered my quick fix =P
I have the same problem that by the time I get the case out of the case i find that I accidently answered or hung up because I accidentaly touched the screen,I tried slide to answer but it is not working properly on the Diamond
This would be helpful, I have the same problem sometimes.
I'll look for a registry setting.
s2u2 not working?????
if its bad, ugly, or something, put an self image as backgruond, maybee that would cheer u up, im using version 1.00 that dosent got the slide to answer working good(beta), so i turned it of, then it worked great and i can still use hardware buttuns to answer, and if u dont like the apperence just remove background an d remove clock, all thats left is a black screen and the slider...
This thing with enabled screen answer/ignore buttons pisses me off too... May be we can install a new dialler without screen buttons?
Really no one cares?
nikitich said:
Really no one cares?
Click to expand...
Click to collapse
i don't think it's about anyone caring. i think it's about the diamond being a new device and no one having the tricks/tips/tweaks yet. patience
I understand that. But if nobody care about an issue no one will look for the solution. I would install another dialer but i do not know how to uninstall the existing one.
jehlinger said:
This would be helpful, I have the same problem sometimes.
I'll look for a registry setting.
Click to expand...
Click to collapse
Be great if you (or anyone else?) could find a hack for this - I have the same problem when taking the phone out of the case. It would solve my (our) problem if only the hardware buttons could answer/reject an incoming call.
Regards,
Gary.
Since nobody answered this thread anymore... Did someone find out? Or did you give up?
I need this badly, stupid on screen buttons always go off
I had the same problem but after i did this I had no problem anymore.
The answer button in default phone skin(WM6) is much smaller so the risk of accidentally reject or answer the call is not so high.
Hello
Does anybody know if it is possible to set vibrant signal for the virtual keyboard press? How?
zoltancsapo said:
Hello
Does anybody know if it is possible to set vibrant signal for the virtual keyboard press? How?
Click to expand...
Click to collapse
i think this might have been discussed before in other forums. you may want to do a search on this and i believe you can find the results.
just out of curiousity, why would you want to activate vibrate effect for keypress? you are using 1800MAH battery?
Here
Heres an app that works fine with my Diamond. He's right, though, battery conservation is crucial on this phone, unless you can charge it all the time, like at work in the car, etc. Here it is anyways.
View attachment KD8DNS_KEYPAD_VIBRATE.cab
vibrate keyboard
just loaded the vibrate phone pad vibrate cab, I was hoping the the keyboard for texting would also vibrate.
Is this possible to change
lenaddison said:
just loaded the vibrate phone pad vibrate cab, I was hoping the the keyboard for texting would also vibrate.
Is this possible to change
Click to expand...
Click to collapse
same here.
hi guys
just a little question
is possible to use the alarm to wake up when the diamond is switched off
it works only when the diamond is on
thanks to everybody
You need to use a 3rd party software like ActiveKitten Chronos
thanks for your help but is not what i'm searching
this program doesn't work when the diamond is swithced off but only when is on
i shut down the mobile during nigth time and i need an alarm clock that swithc on the diamond and wake me
ugodeimoradan said:
thanks for your help but is not what i'm searching
this program doesn't work when the diamond is swithced off but only when is on
i shut down the mobile during nigth time and i need an alarm clock that swithc on the diamond and wake me
Click to expand...
Click to collapse
When you shut the phone down, it's totally powered off, therefore nothing is running, therefore it's not possible to have a program "wake up" the device as it would need to be powered up to run in the 1st place.
ugodeimoradan said:
thanks for your help but is not what i'm searching
this program doesn't work when the diamond is swithced off but only when is on
i shut down the mobile during nigth time and i need an alarm clock that swithc on the diamond and wake me
Click to expand...
Click to collapse
Have you done a soft reset since setting up the alarms? WM seems to have a bug whereby the alarms won't work until this is done.
And yes having the diamond switched off it will wake up for the alarm contrary to the above post.
ugodeimoradan said:
is possible to use the alarm to wake up when the diamond is switched off
Click to expand...
Click to collapse
NO, it's impossible.......
Sledged said:
Have you done a soft reset since setting up the alarms? WM seems to have a bug whereby the alarms won't work until this is done.
And yes having the diamond switched off it will wake up for the alarm contrary to the above post.
Click to expand...
Click to collapse
That's incorrect. When the phone is switched off (not just sleeping) it is impossible to have any program running or alarm sound.
hummmmm
i was always lead to belive power off ppc off
this was the way with all my other ppc's
thanks again
anyway i suppose is a problem or a bug of WM6.1
in my old ppc with WM2003se it wake up also when is stutted down
i hope to found a solution
it's annoying to use another mobile only to wake up in the morning
ugodeimoradan said:
it's annoying to use another mobile only to wake up in the morning
Click to expand...
Click to collapse
hey i'm pretty newb on here but correct me if i'm wrong, an alarm clock works too right?
Why not just put your diamond to sleep then? I didn't realise you could completely power it off but can't say I'd bother doing that as then you have to wait for it to boot etc.
I set mine to airplane mode and it uses minimal power overnight and then wakes when the alarm time hits.
I've used ipaq's since the 3650 years back and have always used them as my alarm. Handy as a nightlight as well.
[sticky!!!!] The "answer Only With Hw Buttons" option or similar solution...
...a lot to read... and a lot of solutions!
thank you guys!
Just an Idea... maybe its possible to set the Touchscreen sensitivity to VERY low everytime there is incoming Phone call. And then you cant accidentially press one of the onscreen buttons. However, i think registry entries only change after a softreset. MAybe there is some workaround?
this solution will affect the entire normal use of the diamond. :-(
anyone knows a cook?
it can't be so difficult.
I'm willing to pay the money saved in missed calls in one week. It could be a lot, for sure...
Agreed! it would be a great feature to have
diamondino said:
this solution will affect the entire normal use of the diamond. :-(
anyone knows a cook?
it can't be so difficult.
Click to expand...
Click to collapse
Well actually i meant it a different way. Imagine.. There is an incoming Call... This call is recognized, and the touch sensitivity is set to very low. After the call is done, or the call is taken, the sensitivity is restored..
yep... but i suggest this like a second try....
the easiest way is to create a new phone skin.
the best is a "only hw buttons" option
i can't believe to the drink beer app... useless but true... and nothing about this bug... it's incredible.
I would be satisfied to have ALL the hardware keys to be locked during incoming calls and the screen locked and need to unlock the screen with ie a slide before be able to answer... As the hardware buttons also is easy to press when it's in the pocket when your sitting etc.
diamondino said:
I think we're half a million to damn this bug.
WE ALL NEED to lock the screen buttons.
WE ARE BORED of losing calls or answer accidentally taking out the diamond from our pockets.
WE NEED A SOLUTION.
WE DON'T WANT S2U2 AS A WORKAROUND.
HELP US.
AND YOU'LL BE REWARDED.
['cos right now... we still spending money on calls we miss. s##t.]
support this thread.
Click to expand...
Click to collapse
I don't get it. My on/off button is set to lock all other buttons when the device is off, apparently meaning the display. At calls the display is off after a few seconds and I have two choices to bring it back - push the on/off or remove the stylo causing notes to launch. Hence the only insident where I can see a problem is when the display is trickered to go on (alarm or incoming call) and it's way down the bag you may push something. Here I suspect the solution is to have it in a pouch. Anyway, I have seen many yields about this so i'll surely be victimised one day as well.
Its a really challenging app to make.
Think about it. How can u lock the keys yet mantain the ability to answer anytime with one button.
Tough call
maybe using the light sensor ... in the pouch screen off- out the pouch screen on
emilceteras said:
maybe using the light sensor ... in the pouch screen off- out the pouch screen on
Click to expand...
Click to collapse
what if your are in the dark? I think the best solution is to make a dialer without the buttons
pcharouz said:
what if your are in the dark? I think the best solution is to make a dialer without the buttons
Click to expand...
Click to collapse
touch he screen to go on
emilceteras said:
touch he screen to go on
Click to expand...
Click to collapse
then were back to square one were it dials lol
cornelious2 said:
then were back to square one were it dials lol
Click to expand...
Click to collapse
No, touching the screen will not bring the screen ON, the only thing that will bring the screen ON is pressing a hard key.
It's an excellent idea to make the light sensor feel if it's in the dark, and if so shut down the screen, the only problem is that nobody knows how to reliably do this for all ROMs (even official).
Take a look here guys... already lots of posts on this
http://forum.xda-developers.com/showthread.php?t=402916&page=10
1 a new phone skin without any buttons is the easiest solution i guess
2 changing the sensibility pressure works only on soft reset
3 light sensor... nice, but i don't think it's the best way to do this
isn't a predefined "lock screen" function on the diamond?
i'm a developer but i dunno nothing about pda application... i think it's weird if no one thought to a simple "block screen" function.
emilceteras said:
maybe using the light sensor ... in the pouch screen off- out the pouch screen on
Click to expand...
Click to collapse
pouch....hated the thing...go on
i don't think many people are using the pouch now there is more choice
counterfitninja said:
Take a look here guys... already lots of posts on this
http://forum.xda-developers.com/showthread.php?t=402916&page=10
Click to expand...
Click to collapse
take this thread like an official request...
anyway, IF anyone konws how to work for developing a new phone skin... i'll do it. but i'm not into pda since this diamond and i dunno where to start...