Hello, like on my last CRUISE this functionality was ok, i've installed the same application on my new DIAMOND.
The problem is, when i receive a call, the callerID from S2U2 and the callerID from the system are running at the same time.
Sometime, it's impossible to take the call because of the flashing screen?
Am i alone with this kind of problem?
Related
After using the Tilt for a week, I experienced this problem couple times and I wonder if others are having the same problem. This typically happen after I used my phone for a while. I would make a phone call or receive a call, the call would be silent or both ends (caller and callee) for about 20 seconds and then we could hear each other. Once the phone had this problem, every subsequence calls will have the same problem until I soft-reset the phone. I wonder if it is a hardware problem and if I should get an exchange before the 30 days is up.
never had this problem in any of my windows phones... any 3rd party applications installed?
what operating system is it running? (AT&T? t-mobile? Orange? etc)
verify that you don't have any recording software, like resco audio recorder
Hard reset the phone. Worked for me.
I also had the exact same problem with my Tilt flashed to HTC stock Rom. It only happened once before I flashed to austinsync's BigStorage Rom and has not happened since. But I am starting to get a little nervous about all of these "little issues" that people are having with this phone.
You know.... like the phone not working!! Or... emails not coming through after the phone goes to sleep!!
I am really hoping we see a new Rom show up on these boards like... by the weekend.
I am using the original AT&T rom and do not have any 3rd party recording software. I do have MS Voice Command 1.6 but I don't think that's the problem.
No voice command, standard t-mobile Vario III.
I'm also noticing a distinct lag between the call being picked up and the time the caller and I can hear each other.
Often the call is connected to a volley of hello ? 's
The delay is much worse if I'm using a BT ear/head set. And the ear piece volume is atrociously quiet.
Not nearly as good as the Vario II
I am having the kaiser for three weeks now and I also had this problem until I did a hard reset today (soft reset did not solve the problem). I also had resco audi recorder running with storing the files on the sd card. As I also red that others have a problem with the delay ring when recieving a phone call when the ring tone is stored on the sd card, this might also have the problem (I only realized it after the hard reset when I was wondering what all those recordings meant to be).
Markus
It appears my problem has something to do with using Voice Command over BT. The problem went away after I stopped doing that.
markustr said:
I am having the kaiser for three weeks now and I also had this problem until I did a hard reset today (soft reset did not solve the problem). I also had resco audi recorder running with storing the files on the sd card. As I also red that others have a problem with the delay ring when recieving a phone call when the ring tone is stored on the sd card, this might also have the problem (I only realized it after the hard reset when I was wondering what all those recordings meant to be).
Markus
Click to expand...
Click to collapse
I have cheked out you are reight when you disconnect the Resco audio rec the problem is over
Hello,
I have installed SJphone to use voip on my diamond. However everything works but how do I answer a call when it starts ringing? It seems unclear how to do that as I do not get any button to answer?
nobody!!
nobody uses SJPhone in their HTC diamond?
How to answer a call? So far I couldn't figure it out, therefore I put auto answer option on to be able to pick up the call!!!!
nobody
anybody?
How do I answer the call in sjphone please???
hi.
i encountered the same problem as you did.
the problem is because that SJPHONE you installed is for wm2003.
the bottom of the dialogue of an incoming call which showing the "answer" and "reject"
button won't display correctly on wm6.1.
just download the wm5 version SJPHONE from this link and install it, problem solved.
http://www.sjphone.org/preview/SJphone-1.60-WindowsCE(preview)/
thx
thx alot, finally i can see the accept menu thanks to you
Hoping that someone can help me here.
I was using my HTC touch diamond with WM 6.1 and it is an official rom, when i received sms msg, the time is always showing 4 hours behind from the present time.
what i have done is flashing my phone with BSB's WM 6.5 and thought it would work,but turns out that i still have the same problem,
sending sms out to another person,the time stamp is correct. just when receiving it, i am having this issue, can someone look into this and provide me with a solution?
MANY THANKS!!!!!
correct time zone in "clock & alarms"?
yes, it is in correct time zone!!! and still have the same issue.
Aye I and my girlfriend both have Touch Diamonds and they both suffer the same problem. :/ I have also updated my Touch Diamond to 6.5 and still have the same problem.
Every TF3D 2.1/2.5 ROM with wm 6.5 that I run on my phone has this problem. Whenever I receive an incoming call, I press the talk key and the phone either doesn't connect with the call until like 10 seconds later OR sits and the incoming call screen and just drops the call. This is VERY annoying. Everytime somebody calls me I have to call them back and explain why I was unable to answer the call. I don't know if this problem is related to TF3d 2 or WM 6.5, all I know is that I've flashed multiple ROMs from different cooks (Itje, NRGZ28, agent_47, rotastrain). All of these cooks make EXCELLENT roms, but I have the same problem in all of them. So, does anybody know of another good dialer that I could try? I want something that is both attractive (like TF3d 2.5 dialer) and functional.
Try PhoneEx from iconsoft.com. Though I don't know how it will go with TF3D.
Bennieficial said:
Every TF3D 2.1/2.5 ROM with wm 6.5 that I run on my phone has this problem. Whenever I receive an incoming call, I press the talk key and the phone either doesn't connect with the call until like 10 seconds later OR sits and the incoming call screen and just drops the call. This is VERY annoying. Everytime somebody calls me I have to call them back and explain why I was unable to answer the call. I don't know if this problem is related to TF3d 2 or WM 6.5, all I know is that I've flashed multiple ROMs from different cooks (Itje, NRGZ28, agent_47, rotastrain). All of these cooks make EXCELLENT roms, but I have the same problem in all of them. So, does anybody know of another good dialer that I could try? I want something that is both attractive (like TF3d 2.5 dialer) and functional.
Click to expand...
Click to collapse
I use Inesoft Phone (http://www.inesoft.com/eng/index.php?in=phone.html) and have found it much better but still not perfect!
I'm currently using W6.5 titanium (Genesis rom - which is superb!) and it uses a caller display screen that I've not seen so far - I think it's the new 6.5 caller display that works very quickly and as expected...
Hi!
The Kaiser of my Girlfriend is acting strange sometimes. Sometimes (i cant reproduce it) the Kaiser blocks calls and SMS, its like the Device is turned off. Also i cant send SMS at this time. The Kaiser seems quit normal at this times, so its very anoying when you dont recognize it.
When i do a Softreset the SMS an missing Call info comes in.
The Kaiser is running with the latest original HTC Rom.
Best regards
MrMmmkay