Hello,
It is 2 days now i have put aside my M600 Eten for an HTC P3600.
It cames with french and i want english.
The HTC support site doesn't allow me to dl eng rom and load them.
1/ Where can i dl last p3600 rom eng ?
2/ Is it ok to do that
3/ Is there better rom than original htc rom ?
Many thanks for your help guys !
Yoni
You can read the wiki about the roms.
and in hebrew www.pocketpcfreak.com in the forums...
Nadavi
Hi Nadavi,
Point is that i can hardly read hebrew (i'm new there too ).
Meanwhile thanks to you, i' wandering into wiki.
I found rom but i need confirmation.
On my htc there is a rom fra (french) 1.23.406 at wiki rom dl i found what look the best and safe choice in english, 1.23.405.2 us. Is it ok to flash my p3600 with it ?
I have the same problem I both the HTC P3600 in italian version and when I went to the HTC site they asked the serial# and I can download the update only in italian language, I wish to change in english, I need help.
Thanks
Hello Iceman67,
I have made it !
Go to XDA-Wiki download Rom eng (i have taken RUU_Trinity_HTC_WWE_1_1_.23.405.2_103_6275_1.38.00.11_108_GPS.exe as i guess it is the good one), download also your original rom (in case you need to fall back) plus a small app SSPL-TRIN to trick the device.
It is quit simple but it could not work at first time.
Here it works only at the second time... but it it work
Yonixxx said:
Hello Iceman67,
I have made it !
Go to XDA-Wiki download Rom eng (i have taken RUU_Trinity_HTC_WWE_1_1_.23.405.2_103_6275_1.38.00.11_108_GPS.exe as i guess it is the good one), download also your original rom (in case you need to fall back) plus a small app SSPL-TRIN to trick the device.
It is quit simple but it could not work at first time.
Here it works only at the second time... but it it work
Click to expand...
Click to collapse
Hi Yonixxx
The ROM in WWE gave me error 294 Invalid Vendor ID and the SSPL-TRIN I don't know how to use it, can you tell me how to do that?
thank
Put the SSPL-TRIN app on your phone, run it, then run the RUU.
Plastriq said:
Put the SSPL-TRIN app on your phone, run it, then run the RUU.
Click to expand...
Click to collapse
Hi Plastriq
Can I put it in any folder or there is a specific folder to put it? When you said run it you talking about the SSPL, because this program doesn't run and I don't know why.
Thanks
I have made it and works good.
Thanks
As I understand "Also the Breeze Hardware shares most of the Parts with the Hermes" is it possible to convert it's WM 6 for Breeze?
(sorry for my bad English)
Probably it is, need to look into it. at first we need to crack spl to avoid nbh check
hi,
maybe hard spl v7 works...
i have experimented today... but i need my phone, because of that i finaly didn't click on the "flash now" button
Hermes is a PocketPC and Breeze is a Smartphone...
Both WM5 and WM6 have separate OS editions for PocketPC and Smartphone. If I were you, I wouldn't try to force "WM6 Professional" (Pocket PC) for Hermes on a Breeze (Smartphone - "WM6 Standard").
So, you need to decompress the xip segment and get a memory map of breeze. if memory addresses are the same as hermes, you need to replace a coredll.dll in second xip segment and you need to build imgfs using wm6 os from excalibur/vox and breeze wm5 drivers and applications. to load this into the phone, you need to avoid nbh check
how can we decompress the xip segment ???
what is exactly the coredll.dll ???
HI,
today i have played a little bit with bootloader...
task 32 says FF ... so its definitly not supercided... but i don't really know why a few other persons here can flash a dopod rom.. maybe they are all the same cid ??
also i'm searching for a usb sniffer ... have found a few in the web but all costs money and noone had give me understandable commands while using the romupdate tool from the actuell htc rom...
ok found some other interresting info..
the RUU_BREE100_1.34.251.1_1.38.00.10_HTCEUR_SHIP ROm has a QTEK_Z12 CID ....
but we all can update it to breeze device...
quite interesseting is also that:
Cmd>info 2
HTCSQTEK_Z12Û.oÂHTCE
... as we can see i my HTC Device has a QTEK_Z12 CID ... maybe someone can check what CIDS und the Breeze's out there...
Hi, could you explain how have the CID of the phone. Because i tried with info2 but it didn't work. Thanks. ++
----------------------------
just go in bootloader:
turn off device and restart it with hold cam button...
attach usb cabel the serial line on the 3color screen should change to usb...
also you have to deactivate the activesync usb connection...
then start the mtty app choose the usb connection...
then youll see the cmd> line... after this enter info 2 ... and you should become a output like mine...
------------------------
what ipl/spl version's are shown on the 3 color screen ??
i read that HTC announced S730 (wings)
it is like s710 but with MTeoR's hardware and WM6
I hope that it is possible use s730 ROM to take WM6 for MTeoR
So we need wait for s730 i think
I hope that i can see WM6 on my MTeoR :-[
concerning to his thread: http://forum.xda-developers.com/showpost.php?p=1257924&postcount=10
i say it a second time now...
we need the excalibur wm6 rom
why...
simply ... the excalibur has likley the same hardware as breeze !!!
all other devices are based on the hardware like wizard... (200mhz cpu etc.)
I'm just working on all the needs...
cookin with wm5 works!! i had cooked a German only version from the actuell rom! with a few tools on it...
also cooked an costumized bootscreen:
also there has to be somewhere in rom a "Shutdown" Screen.. i flashed the 2 Bootscreens and when shutting down the phone theres the old htc screen...
excalibur (s620) based on Tornado. So it have OMAP chipset, other radio w/o 3G etc.
at this time there is no MTeoR's based smartphones on the market as I know. Announcement only (Wings/Erato/"excalibur replace")
... damn ... what t.. f...
i searched a few days a ago and i had a website where the info was that excalibur is like the mteor...
....
ok so far i can see the next mteor hardware like phone should be the s730 (Wings)....
sorry that was my fault...
...
ok maybe i tought that excalibur was the right because this is the only one where i can find a wm6 rom for download... on all others there are no shipped roms available??
hmm
Hi,
ok just played a little bit with the excalibur rom...
the mainproblem is that i cant extract the files out of the nbh file...
because of that i can't modifiy a hermes rom...
i will look forward and hope to find an solution for it...
ok...
extraced excalibur rom...
cooked a bit...
but no working rom yet!!
also have flashed a wm6 hermes rom with a few files modified to breeze...
device didn't boot on bootscreens...
when flashing an unmodified excalibur rom, breeze directly goes to bootloader ....
next thing i want to try is to use the original 1,34.251.1 Rom ...
wow... I hope you manage to get a working WM6 rom for the MteoR...
Hi guys!
i have cooked today the wm6 rom with base wm5 ... but windows did not start up after 2nd boot screen!
i think that all goes to hard work ....
if anyone knows what the real core file of winmobile are then please post it!!
futureshock said:
Hi guys!
i have cooked today the wm6 rom with base wm5 ... but windows did not start up after 2nd boot screen!
i think that all goes to hard work ....
if anyone knows what the real core file of winmobile are then please post it!!
Click to expand...
Click to collapse
No, it`s not the way. Just contact me via ICQ and we`ll work. but now no time for that
HI, first sorry ofr my englis, i am from argentina, and i have a t-mobile SDA and i need know if with programs i can make a wm6 rom or if i can custimize the wm5 rom por my tornado. thank
hey every body....
thx for this great work at this great website...
i need wm6 for my o2 xda lls plz help ui cant got it anywhere...
thx anyway....
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade4
here you can find a list of roms where you can pick anyone you like to flash it.
also, make sure to follow these steps precisely:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade1_WM2003SE0
there you have a step by step instruction on how to upgrade.
hope this works for you (i don't know whether all the download links actually work, couldn't test)
if you don't know, which one to pick, i can recommend you the following: for wm6.1 sun_dream's 20758 build, for wm6.5 xplode's 21202 build. hope, this helps you
i somehow ain't able to download the file Ruu_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.3 4_1.13.25.24_Ship
over rapidshare, so i wanted to ask if someone of you could give me a working
download link from an other filehoster.
Thx for the help..
(The European version would be fine, too)
Greetz BlaBklla
check this out
http://forum.xda-developers.com/showpost.php?p=3580785&postcount=89
it's on NBH.. and i don't know how to use it. so i decided to use 1.56Olinex instead of 1.54
look for one of the 1.56 threads in this forum, in one of them, there are some serial numbers in the 1st post that you can use to download from the official htc website, might even be in the wiki
wiki has the s/Ns
Hi everyone,
I am using a HTC TP2 T7373. I want to uprom for it.
Its configurations are:
ROM: 1.86.401.1 ( 67102) WWE.
Please help me:
- Can I uprom from this platform?
- Show me the link to get the right HardSPL.
- Tell me what is the better and suitable new ROM to replace the current.
Great thanks for your kind inputs.
Cheers
See the "sticky" threads at the top of the forum on "Flashing your first GSM Rhodium ROM" and "HardSPL Unlocker". They have all the information that you need, and links to HardSPL.
What suits your needs for a ROM might not suit someone else, so pick a ROM and try it out.
Thanks Steviewevie for the indications.