this is my first post...i try to change a rom from wm 5 era na wm6 pl.firstly ,i unlocked my mda compact 2 program which is called" lokiwiz03a" and it was ok...aftar tha i find a polish rom in
http://rapidshare.com/files/41548391/WM6_PL.rar
pass: mobilepc
and a try to change my rom - "awizard-v1_3beta2_475"and now is almost dead my mda....after few minuts sth happened w connection- my pc was turn off...and mda was stuck....a reset both..now i have only splash screen
ipl 2.06
spl 2.06.0000
gsm 02.19.21
os 4.0.0.0 ?????and this is one of the problem ...
next i dont have any connection with pc..i don't no what to do.....;-((((((i know that is same program shell tool...but i don't know where to find i and how to use.......any roms which i have don't work because i don't have any connection with my pc(error connection problem)...how to have my win5 or another win 6 back.....i have bootloader...but i don't no how to use....i don't have any connection with pc..some aplication of rom didn't work on vista 64 bit ((((please help me!!!!!!!!
hi
try this
http://forum.xda-developers.com/showthread.php?t=320390
second post have same problem as you today and i fix it on this way
jerry
hello
i tried to update my trinity with WM6 which i found in forum.
i think i´ve done all steps until this 4 colors on my device.
Trin100
IPL-SSPL by Des
Trin100
SPL-1.07.ds
usb
is shown. no light is on. but then on my pc is shown "error:connetion"
"please check the cable/cradle" and everything stops.
on my pc ist vista and the trinity is a vodafone "branded"
after a softreset everything is like before. nothing is lost.
has anyone an idea?
thx TheSmiler
Keep on trying, maybe you'll brick it I managed once. Very satisfying feeling.
I usually succeed to tune, update and correct my pc alone by Reading The ****ing Manual and the Forums. But now for a simple upgrade of my Trinity I fail. I'm becoming crazy. Then I call for your help, ans post to help others like me.
--------------------------------------------------------
My HTC P3600 is :
hard rest the htc (bottom hole)
reset : boot screen gives M05 B05 D1.23
Sys info gives :
ROM ver : 1.23.406.2
ROM date : 12 march 2007
Radio ver : 1.38.00.11
Protocol ver : 32.71.7020.12H
Rom ext ver : 1.23.406.103
-----------------------------------------------------
I Prepare by REMOVE EVERYTHING FROM HTC, AND START FROM NEW BASE.
- card removed
- reset from the parameter menu, with code 1234
- setup Active sync (no data, no agendq, no mails, etc etc, just the files are sync)
- sync
- remove battery, restart
- sync
-----------------------------------------------------
I upgrade and follow the guide from http://trinityguides.info/index.php?option=com_content&task=view&id=25&Itemid=66
1/ UPGRADE SPL
Enter manually bootloader to check :
TRIN100
IPL-0.50
TRIN100
SPL-1.20.Olipro
>>> so I already have the correct 'hArd-SPL'
Must have re,ained from all previous install test I did...
so reset (bottom hole)
2/ UPGRADE RADIO try 1
download http://colrou.free.fr/1.50.08.11.exe
manual enter bootloader (on+photo+reset hole)
get :
TRIN100
IPL-0.50
TRIN100
SPL-1.20.Olipro
plugin htc on usb cable (hear device connection, but active sync is not detecting any device itself)
run ROMUpdateUTility (RUU 3.1.3.2)
Run again ruu : ERROR 260 : no connection
run ROMUpdateUTility (RUU 3.1.3.2)
but stop on tricolor screen
TRIN100
IPL-SSPL by DES
TRIN100
SPL-1.07.ds
then ERROR 246 : DEVICE NOT RESPONDING ARG !!!
run again ROMUpdateUTility (RUU 3.1.3.2)
but it stays sticked in bootloader screen and report ERROR 260 : no connection
2/ UPGRADE RADIO try 2
reboot
sync
run again ROMUpdateUTility (RUU 3.1.3.2)
ok... ok ...
from 1.23.406.2 to "ROMBaker"
confirm install on the htc screen
goes stucked to bootload screen :
Go to tricolor screen
TRIN100
IPL-SSPL by DES
TRIN100
SPL-1.07.ds
then from RUU "ERROR 246 : DEVICE NOT RESPONDING"
run again ROMUpdateUTility (RUU 3.1.3.2)
but still stalled in bootloader screen and ruu report : ERROR 260 : no connection
2/ UPGRADE RADIO try 3
install enterbootloader
remove usb from activesync config
run enterbootloader on htc
fet
TRIN100
IPL-0.50
TRIN100
SPL-1.20.Olipro
run ROMUpdateUTility (RUU 3.1.3.2)
but get ruu report : ERROR 260 : no connection
Me too I managed to upgrade to P3600 WM6 - ADW-edition - English RC-2 version but when I tried to upgrade to NEW PDAMobiz WM 6.1 Trinity or any other rom I could only managed to get to the Tri-color the phone hang at Tri Color spl by des and then connection is lost the Ruu updater could find connection to my d810 ..... I hope someone could tell me what is my problems.
Thanks in advance
s4cr3d said:
Me too I managed to upgrade to P3600 WM6 - ADW-edition - English RC-2 version but when I tried to upgrade to NEW PDAMobiz WM 6.1 Trinity or any other rom I could only managed to get to the Tri-color the phone hang at Tri Color spl by des and then connection is lost the Ruu updater could find connection to my d810 ..... I hope someone could tell me what is my problems.
Thanks in advance
Click to expand...
Click to collapse
By the way I am using Vista.....
Solved ....I just use XP
i have same problem-error 246.i try everithing and no result.
Better to reflash original rom, i got hang once.... alway error 284 or 286.
Then kept loading the original till it finally back to official rom...
Now dare not upgrade rom...
ok, just want to make it short: (P3600 user)
1. I have WM6.1 ROM (FleNover 3.3 Black edition) installed.
2. When I want to downgrade to WM6 official, after 20% it goes error.
3. Now, it only shows 3 colors.
4. Here is my PDA information in 3 colors:
TRIN100
IPL-1.00
TRIN100 MFG
SPL-1.30.Olipro
5. When I want to upgrade with WM6 official, after my PDA shows the progress bar, it restarted and the update screen shows Error 286.
6. How do I fix it?
thank you very much
Hey,
Great site, made it all nice and easy for my first experience heh.
sent you $5 as a thanks, but seriously, these at the end of the guide?? Surely these should have been at the beginning??
Rog.
I will post guides later, but if you want a quick automated backup/restore you can use the following programs
* PIM backup (backup/restore SMS, MMS, e-mail, contacts, calendar, tasks, call history and more)
* Settings Saviour (backup/restore preferences, settings, auto install cab files & xml on restore)
Last week i recived a call, I've pushed the green button and the telephon crashed. I restart the phone, but during the boot it write "no gsm" and it stop on windows mask. I've unbrick the SPL, I've installed the SLP 1.30 Olipro, I've try to install the radio rom 1.46.00 but it don't star, I've installed 3 different windows ver. 6.0 but when i switch on the telephon it write "no gsm" and stop on windows mask. I'm despered....... could any one help me?
Regards
Farinik
HTC P3600
TRIN100
IPL-0.50
TRIN100 MFG
SPL-1.30. Olipro
farinik said:
Last week i recived a call, I've pushed the green button and the telephon crashed. I restart the phone, but during the boot it write "no gsm" and it stop on windows mask. I've unbrick the SPL, I've installed the SLP 1.30 Olipro, I've try to install the radio rom 1.46.00 but it don't star, I've installed 3 different windows ver. 6.0 but when i switch on the telephon it write "no gsm" and stop on windows mask. I'm despered....... could any one help me?
Regards
Farinik
HTC P3600
TRIN100
IPL-0.50
TRIN100 MFG
SPL-1.30. Olipro
Click to expand...
Click to collapse
Try flashing an Official HTC WM5.0 or 6.0.
this help??
http://forum.xda-developers.com/showthread.php?t=399891
Hi,
I cannot manage to update my radio to the 1.00.25.05
I had my mda unlocked by olipro, which pushes HSPL 1.20.
I learned to upgrade to 1.40, which I downloaded and installed (it shows 1.30 during the upgrade)
But it doesn't work anyway, not on my XP nor on my Vista PC.
It works until the point where the progress bar on the PPC appears, but it stays at 0%.
After a while it stops with an error message (262 or 276 AFAIK)
What can I do?
Thanks for your help, Guenne