Database Develop

Network is locked

Hi,
I was use a sim-unlocker from cnomex and change the sim in my phone.
I get the message
"network is locked, Please input unlock code"
Any advice ?

Phone is locked...
If you're getting this message, it means your phone is still network locked (SIM lock), so your unlocking software either hasn't worked, or it's the wrong software for your device.
Check out the 'ROM Development' section, or the Diamond Wiki. I would give you a direct link, but I can't remember exactly where I saw the thread

Is there any way to know IMEI code?

Hello,
Few days ago i bought HTC At&t Tilt/8925 in USA. Now i'm at home in europe and need to unLock it.
Also find in Ebay lots, where people who have access to some databases sell "UNLOCK Code For *At&t/Cingular* Tilt/8925", but they need IMEI code of phone at first.
So my question is how to find IMEI phone on locked phone?
As i know i must type "*#06#", but how can i do it, if the only sreen that i can view is
Network is locked, please input unlock code.
To make an emergency call, type the emeregency number and tap emergency
And field under that, where i must type unlock code?
Click to expand...
Click to collapse
So where i must type "*#06#"? in the that field and click ok? I'm afraid, that phone can understand that it's unlock code (and as i know i cann't type more than 5 wrong codes )
Any advice will be appreciated

remove the battery and it should be listed on the phone.

Or type *#06# in your phone dailer .

denco7 said:
Or type *#06# in your phone dailer .
Click to expand...
Click to collapse
i cann't type, as there is one field just for UNLOCK CODE.
Typing in this field will be understand, as UNLOCK CODE
remove the battery and it should be listed on the phone.
Click to expand...
Click to collapse
really
thx
there are 3 codes:
P/n
IMEI
S/N
Waw .. thanks ... so it's the right IMEI code?
Btw, need you advice , does unclocking phone with just codes (as on ebay) work really?
A check this guys have nice rating, but as you know sometimes, just ratings don't mean anything.
Once again, thank you ChumleyEX !

Normally you are able to get a code from at&t to unlock it so I would pay for anything. Also I think you can use a method from this site to unlock.
I'm not sure if you're able to call at&t, but if you can, just call them and tell them you are traveling over seas and you need to unlock it.

http://forum.xda-developers.com/showthread.php?t=361039
;-)

Note for WM6.1 users
================
Do not try this on 6.1! You will need to downgrade to 6.0

REMOVE YOUR SIM CARD!
That will stop the "Network Lock" Message from displaying.
Then you can get your IMEI from the Device Information Page or actually get into Windows Mobile and be able to use the Unlocker found here in the forums.

alexod said:
Note for WM6.1 users
================
Do not try this on 6.1! You will need to downgrade to 6.0
Click to expand...
Click to collapse
Is it mean, that at first i must downgrade it to 6.0, unlock and only after this upgrade to 6.1 ?

Exactly.
filler

Unlock my kaiser :/

Hello,
I'm frenchy user but i have a Kaiser on the operator "Orange" (french)
I want to unlock this phone, I have found a .exe for this (kaiser-HardSPL.exe) and now this phone accept all Sim's card but it ask a "Unlock code" and i don't know what's this **** :x
Maybe it's with the IMEI of the portable, or the serial number ?
Can help me please ?
Thanks a lot !

hcks said:
Hello,
I'm frenchy user but i have a Kaiser on the operator "Orange" (french)
I want to unlock this phone, I have found a .exe for this (kaiser-HardSPL.exe) and now this phone accept all Sim's card but it ask a "Unlock code" and i don't know what's this **** :x
Maybe it's with the IMEI of the portable, or the serial number ?
Can help me please ?
Thanks a lot !
Click to expand...
Click to collapse
Please go here: http://forum.xda-developers.com/showthread.php?t=433835

sucessfully to unlock x03ht

1,using reg editor to unlock the "application lock"
2,SDA_ApplicationUnlock
3,the spl
4,burn the english rom to your x03ht
5,enter your IMEI unlock code

Would you please give us more detail about that, for example, which reg editor did you used to unlock? many thanks

ncowboy said:
1,using reg editor to unlock the "application lock"
2,SDA_ApplicationUnlock
3,the spl
4,burn the english rom to your x03ht
5,enter your IMEI unlock code
Click to expand...
Click to collapse
what do that means ?????????!!!!!!! u mean that solution is how to enter code u have already or what ??????

5,enter your IMEI unlock code
Did you means sim-unlock by saying that?

ncowboy said:
1,using reg editor to unlock the "application lock"
2,SDA_ApplicationUnlock
3,the spl
4,burn the english rom to your x03ht
5,enter your IMEI unlock code
Click to expand...
Click to collapse
Hi please can u give me more details about this unlock
THANKS

ncowboy said:
1,using reg editor to unlock the "application lock"
2,SDA_ApplicationUnlock
3,the spl
4,burn the english rom to your x03ht
5,enter your IMEI unlock code
Click to expand...
Click to collapse
Probabli it's a strange joke

Dial prompt for sim unlock on ls991? (or another method?)

Hi everyone. Could someone please give me the dial prompt or another method to enter an unlock code? I bought an unlock code but can't find a way to enter it. I've also tried mayrer's method (here: http://forum.xda-developers.com/spr...sim-unlock-t3229801/post63465284#post63465284) to sim unlock without codes but it didn't work, unfortunately.
When I put an unrecognized sim into the phone, it tells me it's an "invalid sim" but it doesn't go to another screen to enter any codes as I've seen in some videos.
Any help would be appreciated!
Edit: I have the the ls991 zv5 5.1. Flashed to stock and rooted. Trying to get it to work on Orange network in Spain.