Hallo,
i've a problem with my Touch Diamond.
About from 2 days i can use only the complete qwerty !
If i try two change in compact qwerty and i click OK my phone DON'T SAVE the new keyb setting !
I try a soft reset, but the problem perxist.
Somebody can help me ?
Same problem, dont know why.
There's an easy solution though: click the little arrow by your keyboard icon and select mode from there instead.
murklor said:
Same problem, dont know why.
There's an easy solution though: click the little arrow by your keyboard icon and select mode from there instead.
Click to expand...
Click to collapse
Yes, in this way the set change but ... if i write one sms i can use only the qwerty complete and not the compact !
It's not a problem that it doesn't save when you tap OK, it's that it's not supposed to!
Start>settings>input does NOT select the default input method.
tapping the arrow at the bottom and selecting it there as murklor said is how you change the keyboard.
why it would not save from there is a mystery however. generally, whatever you select using the arrow is saved and comes up from then on until you change it again.
I solve my problem using sip.cab, a little program that i found in this thread:
http://forum.xda-developers.com/showthread.php?t=368527
Related
Argh! its one of those annoyances that pisses me off lol.
Every time I enter a text field screen keyboard pops up covering half of the screen.
How do I stop it? I want it to open only when I click on it.
..........
Out of curiosity, are you using the standard keyboard or Pocket CM, resco ect?
Standard, the one that comes with Dutty's v4. It has a Touch skin, but I think it's standard keyboard.
If there's an answer somewhere - please point me in the right direction.. I searched and didn't find anything (it's kinda hard to phrase this one)
Sorry. Don’t have any answers for you. I was asking just to keejp note just in case a similar problem occurred with my Kaiser. I have an original non flashed rom by the way, so it probably won’t be a problem with me.
246810 said:
Sorry. Don’t have any answers for you. I was asking just to keejp note just in case a similar problem occurred with my Kaiser. I have an original non flashed rom by the way, so it probably won’t be a problem with me.
Click to expand...
Click to collapse
Yes you will.
It's not a bug, it's a feature.. and it comes standard with every ROM I've seen (WM5+). Most people won't have a problem with it, but if I type something, I use hardware keyboard.. so on-screen keyboard pop-up is useless for me.
ummm... well it hasn't been a problem with any of the two MDA touch's, MDA vario II, or two MDA Vario III's I've had in the last few months... Fingers crossed it'll stay that way....
I would also like to see a solution
I vaguely remember a blank-sip or none-sip program exactly for this purpose. You could make it the default. Maybe PHM made it, try searching on the web.
I like the option of using the SIP sometimes, but most of the time I don't want it. It seems like once you use it once, it thinks you want it all the time, until you use the hardware keyboard again. How hard would it be to just let me click on it when I want it. Jeez!
a blank SIP is an option in this free program: http://www.phm.lu/products/PocketPC/PowerToys/
Blank SIP is a solution, but not a very good one. When I do want to use screen keyboard, I'd have to snipe that little arrow to open SIP selection, then find what I want and click it. Wait for it to load...
It'd be easier if it just wouldn't pop-up when cursor is in the text field. There's probably a setting somewhere..
Try this....
DarkDvr said:
Blank SIP is a solution, but not a very good one. When I do want to use screen keyboard, I'd have to snipe that little arrow to open SIP selection, then find what I want and click it. Wait for it to load...
It'd be easier if it just wouldn't pop-up when cursor is in the text field. There's probably a setting somewhere..
Click to expand...
Click to collapse
Try these registry settings that worked for me. When I used to open a new document with ms word or go to the address bar in PIE the sip used to pop up but not after applying these settings. After import .reg file or changing them manually you will need to soft-reset.
It now only pops up when i select rename file in resco explorer. But I can live with that.
Hope this helps...
diigibio (diigimatrix)
Some programs call it automatically. It's the way they're coded. I would think there wouldn't be a way to suppress the on-screen keyboard without disabling it entirely.
ugoff said:
Some programs call it automatically. It's the way they're coded. I would think there wouldn't be a way to suppress the on-screen keyboard without disabling it entirely.
Click to expand...
Click to collapse
The only other way to do this is to go to HKEY_CURRENT_USER\ControlPanel\Sip and change "AllowChange" from 1 to 0 and then soft-reset. However as you say this will disable it fullstop. So the only way you could enter info is either at the dialer (to call someone) or by using the slide out keyboard. To re-activate change the 0 back to a 1 at the above registry key.
diigibio
Okay ladies and gents, I have searched and searched and can't seem to find my answer. I am sure one of you smart lads can give me a response in 4 seconds.
The keyboard and keypad work great on my Tilt but I have two issues:
1) I've noticed the screen shots include a tool bar above the keyboard with options for BOLD, UNDERLINED text, ect. I do not have that. What can I do?
2) My xt9 works fine but if I want to create a new text msg, the drop box of contacts no longer appears. This is quite hard to explain but before xt9, if I inputted the letter "J," a drop box of about 7-8 contacts will show up to with names starting with J; sort of like a quick list. The more letters I inputted, the more specific of results the drop box displays. Even if I am in ABC mode, this feature is no more. Would I have to kill Xt9 via registry to revive this feature?
Thanks in advance.
richabi said:
2) My xt9 works fine but if I want to create a new text msg, the drop box of contacts no longer appears. This is quite hard to explain but before xt9, if I inputted the letter "J," a drop box of about 7-8 contacts will show up to with names starting with J; sort of like a quick list. The more letters I inputted, the more specific of results the drop box displays. Even if I am in ABC mode, this feature is no more. Would I have to kill Xt9 via registry to revive this feature?
Thanks in advance.
Click to expand...
Click to collapse
I too have this similar issue
I am unable to type anything in the to: field cause of Xt9
but after uninstalling of the touch keyboard it works again
yeah, I figured it is software conflict with xt9 - you can have one or the other kinda thing. I think I rather have the xT9 than the quick list. I will just have to press one extra key (return) for every contact included.
corleno said:
I too have this similar issue
I am unable to type anything in the to: field cause of Xt9
but after uninstalling of the touch keyboard it works again
Click to expand...
Click to collapse
Try using the diamond keyboard, it solve the problem.
pmtan666 said:
Try using the diamond keyboard, it solve the problem.
Click to expand...
Click to collapse
thanks that did the trick !!!
the only annoying feature
NO SPACE after clicking a predicted word !! grrrr
anyway to overcome that ?
I really don't understand because of all the screen shots I have seen but today I got my diamond and I only have the double keyed keybord ,but I want the full,usally in the screens shots there is a boten that you press and it changes the keybord.But i don't have it,so I went to settings keyboard and tried changing it to full qwerty,but no luck,can anyone help?
There should be a triangular looking icon next to the keyboard icon when you are in texting/email/document/etc mode. You click that icon, then a list pops up for you to select the input method.
I'd like to think that you've looked through the included instruction manual...
Thanks man,a minute after a posted this thread a have read the manual ,so Im embarrassed to say sorry for posting this
same problem...
http://forum.xda-developers.com/showthread.php?t=409549
i'm not able to click on that small icon. I used to be able to !!!
i click the icon, it just brings up the "keyboard", no list to select from (like it used to).
can anyone help?
BR
Darrell
darrelluk said:
http://forum.xda-developers.com/showthread.php?t=409549
i'm not able to click on that small icon. I used to be able to !!!
i click the icon, it just brings up the "keyboard", no list to select from (like it used to).
can anyone help?
BR
Darrell
Click to expand...
Click to collapse
Might not work.. but just a suggestion, try it out if you have the time.
Recalibrate the screen.
Start - Settings - System
Screen
It's a long shot.. but hey.. you never know what might work.
tried that...
Hi LordRaj...
I tried that, but still no luck...
If I go to Start > Settings > Input, then I can see the list of keyboards. No matter which one I select it *always* puts it back to "keyboard".
not sure why, i'm using standard ROM that came with the phone.
help!
BR
Darrell
darrelluk said:
Hi LordRaj...
I tried that, but still no luck...
If I go to Start > Settings > Input, then I can see the list of keyboards. No matter which one I select it *always* puts it back to "keyboard".
not sure why, i'm using standard ROM that came with the phone.
help!
BR
Darrell
Click to expand...
Click to collapse
I have the same problem and there's another thread on this subject. There seems to be a few people now with this but no solution yet. If you look on the other thread, there is a utility called SIPChange which will allow you to make sure you get the "right" keyboard you want as default but in terms of selecting from the little arrow, forget it (until someone can work out which registry entries are causing this).
Gary.
...
Hi Gary,
Thanks for the reply...
I have been trying to figure it out all day...
Hi Gents, did anyone get this to work, I have also tried sipchange with the same results, it won't stick to any other keyboard other than diamond or builtin
iggy said:
Hi Gents, did anyone get this to work, I have also tried sipchange with the same results, it won't stick to any other keyboard other than diamond or builtin
Click to expand...
Click to collapse
when you say it won't stick, do you mean it changes back after a soft reset? I had that trouble with my current ROM but sipchange fixed it. try increasing the loading delay in sipchange.
I use TouchPal now which sets itself as default just fine - and I can't imagine needing any other keyboard again!
Davey101 said:
when you say it won't stick, do you mean it changes back after a soft reset? I had that trouble with my current ROM but sipchange fixed it. try increasing the loading delay in sipchange.
I use TouchPal now which sets itself as default just fine - and I can't imagine needing any other keyboard again!
Click to expand...
Click to collapse
Thanks Davey101, tried the default 10secs, then 20secs and it did not work, after your advice I switched to 30sec and softReset, then 40sec the same affect.
Then I remembered in my Apache their was always a sipchange shortcut in Startup and when I checked the Diamond their was none, so I created one with the Set parm as my Apache, softreset and I am good to go.
Does anyone else have the following problem ?:
When you go to the SMS tab, and press the small box to start writing new SMS, if you use the original Diamond keyboard, you can just type a few letters of your contact and it will fully appear. If you use TouchPal (I'm using version 3.5), this feature is disabled, you have to type your entire contact name every time, it doesn't recognize the first few letters and try to find a match. This is SO annoying !
Please tell me there is some workaround...
Could it be that the Diamond's original keyboard stores all the contact information in the Keyboard dictionary ?, if this is true, it means no keyboard apart from Diamond's original will allow quick find of contacts in SMS...
no problem with me..
say for eg you wanna call "home"
just press H O and enter and then it will detect home in my contact.
i suspect the problem may be.. touchpal "store" what you pressed in its own list instead of going up to the SMS directly..
Same problem. Would love to see an solution, but I think there is none...
Wizard,
Do you have the Touchpal keyboard ???
its free for personal use available online..
The contacts don't display when you start typing, but if you only type a few letters and then press send a page appears with all contacts that have the letters you've typed in their names. You can then tap the contact you wish to send to.
I don't find it a problem.
mouseymousey said:
The contacts don't display when you start typing, but if you only type a few letters and then press send a page appears with all contacts that have the letters you've typed in their names. You can then tap the contact you wish to send to.
I don't find it a problem.
Click to expand...
Click to collapse
Thanks.
How the hell did you figure that out ?, I would have never tried it myself...
Noam23 said:
Does anyone else have the following problem ?:
When you go to the SMS tab, and press the small box to start writing new SMS, if you use the original Diamond keyboard, you can just type a few letters of your contact and it will fully appear. If you use TouchPal (I'm using version 3.5), this feature is disabled, you have to type your entire contact name every time, it doesn't recognize the first few letters and try to find a match. This is SO annoying !
Please tell me there is some workaround...
Click to expand...
Click to collapse
slide up the 'enter' key on single-key layout for disable word prediction. then u can get back the single letter search and few letters matching feature just like original Diamond keyboard
desol said:
slide up the 'enter' key on single-key layout for disable word prediction. then u can get back the single letter search and few letters matching feature just like original Diamond keyboard
Click to expand...
Click to collapse
That's the first thing I tried, I was shocked that it didn't work !, does this work for you ???
Noam23 said:
That's the first thing I tried, I was shocked that it didn't work !, does this work for you ???
Click to expand...
Click to collapse
yes, its work for me
desol said:
yes, its work for me
Click to expand...
Click to collapse
How could this be ???, could you please tell me your Touchpal settings ?
Noam23 said:
How could this be ???, could you please tell me your Touchpal settings ?
Click to expand...
Click to collapse
i didnt set anything. its all be default n not using any language pack
desol said:
i didnt set anything. its all be default n not using any language pack
Click to expand...
Click to collapse
desol, does it work for you if you don't disable word prediction ?, Wizard claimed in this thread that even in word prediction it works...
Here is the quote of Wizard:
no problem with me..
say for eg you wanna call "home"
just press H O and enter and then it will detect home in my contact
Click to expand...
Click to collapse
beside the contact list problem, I found that the copy and paste button is not working too. Do you have this problem?
Noam23 said:
desol, does it work for you if you don't disable word prediction ?, Wizard claimed in this thread that even in word prediction it works...
Here is the quote of Wizard:
Click to expand...
Click to collapse
if I dont disable word prediction. I will use the way same with Wizard. Both way are work fine for me
Noam23 said:
Thanks.
How the hell did you figure that out ?, I would have never tried it myself...
Click to expand...
Click to collapse
Can't remember how I found it, almost certainly by mistake though
mouseymousey said:
Can't remember how I found it, almost certainly by mistake though
Click to expand...
Click to collapse
totally agree.. we're learn by mistake
just in case you guys are still experiencing this problem, i found a fix at http://forum.ppcgeeks.com/showthread.php?p=241036
HKLM\System\CurrentControlSet\Control\Layouts\e001 0409\Ime File
set the Ime File value from \windows\eT9ime.dll to compime.dll
soft reset device.
yea i think touchpal has alot of problems. liek the new v3.5 when i ever type in the word "its" or "were" in my sprint diamond, phone restarts wtf and same thing in the htc mogul.
Anyone have this issue to or a fix to it?
Thought I move the thread to here to see if I will get more help:
Have had the phone for a few weeks and learning lots. All of sudden yesterday when trying to make a calendar entry, the full QWERTY, compact QWERTY, and phone pad can no longer be used to enter text. It's stuck on numeric mode. Tapping the "abc" key on the bottom of the full QWERTY keyboard doesn't change anything. Can still use transcriber and full keyboard for now. BUt when switched to Note program, all entry methods work. Have not installed any new programs lately (besides a few games and new calculator). Have been using S2U2 and Diamond tweaks to help with a few other problems...Help please since this is now my primary calendar and runs my life so need to have this working again!!
I"m using the GSM version with the latest ROM version. The problem also seems to be "periodic" in the sense that everytime I change mode of text entry to something else and back to QWERTY, it lets me enter text, but the moment I change it to numerics, I can't go back unless I change mode of entry again.....Argh.....
I suffer from a similar problem sometimes. Sometimes the keyboard doesn't open at all. I can't type anything. Perhaps it's because of TouchPal, dunno. Gotta reboot the device then ...
Sorry for abusing your thread, but it's a similar problem.7
Have you performed a soft-reset? Did it change anything or have you been suffering from the same problem ... ? Actually a stupid question
Done a soft reset once, and didn't change anything. Like I said it has a mind of its own...when I change the mode of text entry to full keyboard, everything works perfectly so I've been defaulting to that...then when I change from full keyboard to QWERTY, it would bring back the alphabet screen..but the moment I tap the 123 button to change to numeric pad to enter something, I CANNOT go back....I'm unwilling to hard reset for a problem that I have a "work around" on .....hence the post to see if others have similar problem, and HOW THE HECK did it happen???
ya i'm also facing the same problem, but now my COMPACT QWERTY keyboard stopped working completely, it was only taking no's, please suggest solution for this
Thanks in advance
same problem here. a complete reset to factory defaults was the only solution to that problem.
full querty worked normally, but without T9.
compact and phone pad numbers only, equal if i selected ABC or 123. Symbols worked normally