Related
Hi all,
I had an O2 XDA Stellar which I believe is the HTC TYTN II. However, this phone was stolen a couple of weeks back. I purchased a second hand one today which is sim locked to the orange network. I managed to break the lock by following the instructions on this link http://forum.xda-developers.com/showthread.php?t=433835. I followed the instructions word for word till step 5.
The problem is now though it accepts the SIM and I can dial out, I don't have any audio on the calls So I can call and my phone also rings when I receive a call but I can't hear the caller nor can I be heard at the other end
Also, I hate the orange rom (and I used to complain about the O2 rom) and I wish to use the default HTC WM 6.1 professional upgrade the problem again is that it asks for a serial number and my serial number starts with DCOxxxxxxxxxxx and it says that this is not a valid serial number
What do I do now? Has my phone become a brick Please do help I can't bear the thought of having one stolen and the other toasted by me
All help will be greatly appreciated
fmervin said:
Hi all,
I had an O2 XDA Stellar which I believe is the HTC TYTN II. However, this phone was stolen a couple of weeks back. I purchased a second hand one today which is sim locked to the orange network. I managed to break the lock by following the instructions on this link http://forum.xda-developers.com/showthread.php?t=433835. I followed the instructions word for word till step 5.
The problem is now though it accepts the SIM and I can dial out, I don't have any audio on the calls So I can call and my phone also rings when I receive a call but I can't hear the caller nor can I be heard at the other end
Also, I hate the orange rom (and I used to complain about the O2 rom) and I wish to use the default HTC WM 6.1 professional upgrade the problem again is that it asks for a serial number and my serial number starts with DCOxxxxxxxxxxx and it says that this is not a valid serial number
What do I do now? Has my phone become a brick Please do help I can't bear the thought of having one stolen and the other toasted by me
All help will be greatly appreciated
Click to expand...
Click to collapse
Did you actually read anything or did you just start hacking away ? I will cut and paste a few items out of that thread, so that you don't have to actually read it .
PLEASE READ THE *FAQ* BEFORE FLASHING OR ASKING QUESTIONS!!!
* IF YOU DONT NEED TO FLASH A NEW ROM THEN PROCEED TO STEP 6 TO PUT YOUR DESIRED RADIO BACK*
7. After I flash a Rom I dont have any sound in calls and the camera is black
The Radio has to match the version of Rom you flash i.e. WM6.1, an incorrect Radio will give sound and camera problems. Read The Ultimate Radio Thread to find a Radio that matches the Rom there are lots to try on there if one doesnt work then try another.
3. What are the different types of Unlock?[/B] (answer by DaveShaw)
The three stages of unlock are:
SIM: Allows you to use SIM's from another carrier. Can be done using codes or unlocker programs on xda-devs.
Security: Allows you to flash radios from another device - It does other stuff, but this is all the casual user will use it for
CID: CID unlocking is an old concept, nowadays you flash HardSPL instead. This lets you flash any ROM, Splash or Radio (depending on sec unlock) to your device. N.B. the CID is the carrier ID (e.g. HTC__001). The stock SPL's only let you flash ROM's that match the CID in the ROM image with the CID on your device.
Obviously you did not unlock your phone if a serial number is needed to flash a new rom. I would re read everything and do it again
Thanks for the reply
denco7 said:
Did you actually read anything or did you just start hacking away ?
Click to expand...
Click to collapse
As a matter of fact I did read that more than once.
denco7 said:
* IF YOU DONT NEED TO FLASH A NEW ROM THEN PROCEED TO STEP 6 TO PUT YOUR DESIRED RADIO BACK*
Click to expand...
Click to collapse
As you can see I'm a bit of a newbie here, so wasn't too sure if I did need to flash to a new rom. But I did anyway. And the call problems still remain
denco7 said:
7. After I flash a Rom I dont have any sound in calls and the camera is black
The Radio has to match the version of Rom you flash i.e. WM6.1, an incorrect Radio will give sound and camera problems. Read The Ultimate Radio Thread to find a Radio that matches the Rom there are lots to try on there if one doesnt work then try another.
Click to expand...
Click to collapse
I've been through this link as well and I was contemplating installing the latest version of the HTC WM6.1 ROMS (version 3.34.721.2, radio version 1.70.19.09) available at http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs However I was not sure if this would be ok and (at the risk of sounding extremely dumb) I was not sure what WWE stood for
denco7 said:
3. What are the different types of Unlock?[/B] (answer by DaveShaw)
The three stages of unlock are:
SIM: Allows you to use SIM's from another carrier. Can be done using codes or unlocker programs on xda-devs.
Security: Allows you to flash radios from another device - It does other stuff, but this is all the casual user will use it for
CID: CID unlocking is an old concept, nowadays you flash HardSPL instead. This lets you flash any ROM, Splash or Radio (depending on sec unlock) to your device. N.B. the CID is the carrier ID (e.g. HTC__001). The stock SPL's only let you flash ROM's that match the CID in the ROM image with the CID on your device.
Obviously you did not unlock your phone if a serial number is needed to flash a new rom. I would re read everything and do it again
Click to expand...
Click to collapse
I maintained the default that was given by the unlocker for the CID (I think all zeros). Do I have to change this as per the ROM image? I don't mind re-doing this again it's a relief that my device isn't busted
No your phone isn't busted. Go into bootloader and check what it says next to spl, if you followed Mark's steps, it should say 3.29 Hard. If that is what it says ,then you can flash any Kaiser rom you want. If it doesn't then start over again.
WWE stands for World Wide English and those roms are all in English. That rom you picked will be fine, if you do not wish to explore the fine world of custom roms ? Maybe later.
You only have to CID unlock once by following the steps, not at every rom flash.
No sound means wrong radio, 6.0 roms need 6.0 radios and 6.1 roms need 6.1 radios. If the rom has a radio in it already then flash away.
Thanks Denco Flashed the ones I mentioned and it works perfect. Can't believe I actually have a working device Thanks for all your help, really great.
Now to sync my data to my new (second hand) htc and I'm good to go
Another question, the device works fine, however since it is a HK rom, it seems to have localised to HK. I've changed this as much as possible to UK. However, I'm wondering if this will affect anything else? For example the gps? Is there any quicker way to configure this globally so all settings use UK instead of HK?
Why didn't you flash the latest UK ROM.
Use this code: HT750GB02264 to download from HTC's site.
fmervin said:
Another question, the device works fine, however since it is a HK rom, it seems to have localised to HK. I've changed this as much as possible to UK. However, I'm wondering if this will affect anything else? For example the gps? Is there any quicker way to configure this globally so all settings use UK instead of HK?
Click to expand...
Click to collapse
Once you are unlocked and HardSpl'd you can flash any rom you want. Pick a UK one another WWE rom or a custom rom. Test a bunch until you have one you like. Your only restriction is it has to be a Kaiser rom. And with all the Kaiser roms available, it is not a restriction at all.
Mister B said:
Why didn't you flash the latest UK ROM.
Use this code: HT750GB02264 to download from HTC's site.
Click to expand...
Click to collapse
Wow, thanks for that, I was looking for a valid serial through which I can download from the htc uk site One question I had is do I install the radio which I download from htc? Or do I keep the one I have already flashed? The one I have flashed yesterday seems to be a later version than what I've downloaded from htc
denco7 said:
Once you are unlocked and HardSpl'd you can flash any rom you want. Pick a UK one another WWE rom or a custom rom. Test a bunch until you have one you like. Your only restriction is it has to be a Kaiser rom. And with all the Kaiser roms available, it is not a restriction at all.
Click to expand...
Click to collapse
1. I keep hearing on this forum about Hard SPL, I'm not sure what this is used for or why it is required but I followed the instructions and it seems I had installed JumpSPL1.56-KAIS.exe. Now, since then I had flashed the rom, so do I need to reinstall this again? Is there some other one I should be using? I come across different versions on some threads. Also, how can I check the version of HardSPL I have?
2. When I view the memory (under settings) it shows me Storage and Program. However, I can't seem to see any storage area in file explorer. I know in my old xda 2i, there used to be a separate storage area. The reason is because some of the apps I install are quite bulky for example lexisgoo english dictionary (the dictionary files themselves are about 18mb) and this fills up the main memory. How can I install this in the storage memory? (not storage card since I sometimes swap storage cards)
Sorry lot of questions I know, but I'm a newbie and all help will be greatly appreciated
The UK downloaded ROM will install the radio too.
I would do a bit of testing with your current set-up, then flash the UK ROM.
Test the new UK ROM & radio & then reflash the radio only if you want (do some searching on Radio versions)
Newer versions are not always best, chasing the latest builds normally bites you in the ass at the end of the day.
Check HardSPL by going into bootloader:
* Using a stylus, press and hold the soft reset button at the bottom of the phone along with the camera button
* Release both buttons once the bootloader screen appears
* Exit bootloader by pressing soft reset button
Once you have installed HardSPL thats it, job done (you installed it during unlocking)
What you see in file explorer regarding storage is correct: 128MB RAM for running software ect & 256MB ROM for storing your programs ect (WM2003SE was different)
ROM can be increased by using one of the cooked lite ROMs if storage space is a concern.
Mister B said:
The UK downloaded ROM will install the radio too.
I would do a bit of testing with your current set-up, then flash the UK ROM.
Test the new UK ROM & radio & then reflash the radio only if you want (do some searching on Radio versions)
Newer versions are not always best, chasing the latest builds normally bites you in the ass at the end of the day.
Click to expand...
Click to collapse
Will do, the HK version seems very stable, the only thing that bothers me is the region settings. Anyway, I think I'll give the UK Rom a go and if that works well I'll stick with it
Mister B said:
Check HardSPL by going into bootloader:
* Using a stylus, press and hold the soft reset button at the bottom of the phone along with the camera button
* Release both buttons once the bootloader screen appears
* Exit bootloader by pressing soft reset button
Once you have installed HardSPL thats it, job done (you installed it during unlocking)
Click to expand...
Click to collapse
I checked the version and this is what it showed:
KAIS130
SPL-3.2.9.Hard
CPLD-8
Click to expand...
Click to collapse
TBH, I don't know what any of that means But do you think the version I have is ok, or do I need to upgrade this to some other version?
Mister B said:
What you see in file explorer regarding storage is correct: 128MB RAM for running software ect & 256MB ROM for storing your programs ect (WM2003SE was different)
ROM can be increased by using one of the cooked lite ROMs if storage space is a concern.
Click to expand...
Click to collapse
I've attached a screenshot of my memory screen. The bit that puzzles me is that the storage area apparently has a lot more storage but I do not have an option to install all my applications on that area or atleast the bulky ones. I don't think I need a lite one since I do have 112MB free in the storage area which is more than sufficient for all the apps I usually install. Can you advise how I can install apps to the storage area as well?
Lastly, I was wondering if it is possible for me install my apps on the rom and then kind of take an image of my setup and flash the rom with this setup. That way when I do a hard reset, all my apps are installed again. Which will save me the trouble I know sprite backup does something like this but I'd prefer if it was in the rom
Thanks for all your help, it has given me a lot of confidence in these matters. Something I probably wouldn't have attempted
Mister B said:
Test the new UK ROM & radio & then reflash the radio only if you want (do some searching on Radio versions)
Newer versions are not always best, chasing the latest builds normally bites you in the ass at the end of the day.
Click to expand...
Click to collapse
I agree 101% and it appears fewer resources are put into ironing out bugs in the WM 6.1 ROMs than the WM 6.0 ones. I replied to fmervin's post in the ROM forums along these lines.
If all is running OK I would stick with your current HardSPL.
When installing your applications choose the option of installing to "Device"
You could install all your apps into a ROM, this would be cooking a ROM & is a complex process.
I would suggest a backup via Sprite or SPB. I use SPB v2.0 build3065 & it works well for me, preference of backup software is a bit of a Marmite scenario, you either love it or hate it.
Lastly, I was wondering if it is possible for me install my apps on the rom and then kind of take an image of my setup and flash the rom with this setup. That way when I do a hard reset, all my apps are installed again. Which will save me the trouble I know sprite backup does something like this but I'd prefer if it was in the rom
Click to expand...
Click to collapse
You can't do that, it is flash memory. It's not like you can partition the hard drive.
But this is the easiest way to get your Apps and settings back after a flash.
Try this Sashimi Auto installer by a former XDA member. It is a nice little program that installs all your apps after a flash
http://www.winmo-experts.com/viewtopic.php?f=7&t=4
Help Please
Hey Denco..Than'x for considering my thread & giving out suggestion towards the link to check the info. But i m really nt that techy afterall so i can burn a ROM on my Tytn II. Even though i tried to burn a RUU rom that supports TyTN II ..Its just gets disconnected from USB mode..So i was looking forward to start it initially with some comparatively easier to install .cab files..Can't these RUU files be transformed into .cab files or maybe some other version of Manila 3D cab file that is completely fixed...I seriously have done a lot of research upon this but nothing looks like working. So please if you have some links to .cab files that can give a better & different look to my Kaiser running Windows 6.1...It'l be a great help !!
Than'x & regards in advance
vicky_crispy said:
Hey Denco..Than'x for considering my thread & giving out suggestion towards the link to check the info. But i m really nt that techy afterall so i can burn a ROM on my Tytn II. Even though i tried to burn a RUU rom that supports TyTN II ..Its just gets disconnected from USB mode..So i was looking forward to start it initially with some comparatively easier to install .cab files..Can't these RUU files be transformed into .cab files or maybe some other version of Manila 3D cab file that is completely fixed...I seriously have done a lot of research upon this but nothing looks like working. So please if you have some links to .cab files that can give a better & different look to my Kaiser running Windows 6.1...It'l be a great help !!
Than'x & regards in advance
Click to expand...
Click to collapse
I think you need to decide what it is that you want to accomplish. Unless you cook your own rom, there is no way to add apps to the rom ( so that they will remain after a hard reset) Your rom is wyour phone's base operating system, it contains your OS (WM 6.1 ) and can only be replaced after completely erasing and replacing all files from the previous rom.
If it is a new rom you want, pick a rom that interests you and follow these instructions verbatim .
http://forum.xda-developers.com/showthread.php?t=433835
Your phone will go to the bootloader screen ( three color) and it will disconnect from usb during the process, but be patient until the end. When it says it takes ten minutes, it takes ten minutes. Leave the room if you have to , to keep from getting impatient.
If you just want to keep your OEM WM 6.1 and keep it simple, but change the look of your phone try this,
http://www.htcwiki.com/page/Manila+2D+and+M2D+Themes
This will change the look and feel of your phone with uninstallable .cab files and will not affect the rom or brick your phone by accident.
I'm sorry for this post, because the answer is probelly somewhere on this forum. But I can't find it.
I have my diamond for about a year now and I like to install a custom rom with windows mobile 6.5. But I can't seem to figure out what I need for this.
I already chosen a rom, but I have no idea if it is any good, because there are so many roms out.
http://forum.xda-developers.com/showthread.php?t=563245
So my first question, is this rom any good?
Second question, what type of hard SPL do I need, Do I need the normal one that requires roms to be signed or do I need the developers edition?
Third question. Do I need MTTY for this or can I first try it without MTTY?
And the last question, if I don´t like the rom is it easy to install the original rom again or do I need to do something special for that.
I hope you guys can answer my questions so I can start flashing my rom.
Grtz, Eric
EDIT: I tried installing hard-SPL unsigned, but get an error that it can't connected to my phone. But it is connected using windows mobile device center
why do you want to flash a new rom?
ive recenetly done the same, i wanted to flash my rom as the original was tied to vodafone and some of the features like youtube, facebook, and opera wouldnt work as they wanted vodafone connection ( im on virgin mobile).
anyway after much trial and error i in the end found it versy easy.
3 simple steps. first flash your bootloader
i found the best and easiest one was spl olinex version 4.0
u need to softboot to do this ( hold the down volume and switch on phone, have usb cable connected then use the flash util provided with the above.
once thats done you need to flash rom the radio
again the one out there that seems the best to use is version 1.00.25.05 diamondruu radio
again soft reset so you get the try colour screen and run the flash rom update ( takes about 2 mins at most)
finally choose your version of win mobile 6.5 ( i got windows revoluton 7.1 ultra clean edition)
do soft reset again, then run the flash update and again this takes about 5-10 mins for this)
all worked perfectly for me and it was my first try.
though i will be changing it as the revolution is missing some vital aspects i like.
i know its basic but hopeully you can see its not the daunting prospect some people make out though any rom upgrade carries a minot risk i found this to be as easy as 1,2,3
good luck
cloudedhopes said:
why do you want to flash a new rom?
Click to expand...
Click to collapse
Because I would like some new features on my phone. Like wm 6.5 or a new version of manilla. It's getting a little boring having the same phone for over a year.
@miramele, thanks for your response. I'll give it a try tomorrow and hope I won't brick my phone.
let us know how you get on, it took me several attempts as each time i was trying while within the phone itself, if you hold the down volume key and power on the phone you get the tri colour screen, in this mode i had 100% success each time.
doing it within the OS with phone on it just stuck at 0%.
And since then i have re flashed it with a diff version of wm 6.5 that i prefer and all is good.
the version i flashed to is the manila 2.1 with the latest touchFLO 3d so ive not even bothered with Spb mobile shell though may add this later.
miramele said:
let us know how you get on, it took me several attempts as each time i was trying while within the phone itself, if you hold the down volume key and power on the phone you get the tri colour screen, in this mode i had 100% success each time.
doing it within the OS with phone on it just stuck at 0%.
And since then i have re flashed it with a diff version of wm 6.5 that i prefer and all is good.
the version i flashed to is the manila 2.1 with the latest touchFLO 3d so ive not even bothered with Spb mobile shell though may add this later.
Click to expand...
Click to collapse
Thanks for the advice, if I understand correctly I have to get to the tri-color screen and then install hard-spl? But can I connect to my laptop while in this mode?
I'm gone try it tomorrow because I didn't have any time today.
Thanks for all the help, especially miramele.
I made the step and am now running a custom rom without any issues. Many thanks for the help and for pulling me over the line.
My TYTN 2 (KAISER) came with the original WM6...But I upgraded/flashed it to WM 6.5 and that kinda sucks for me...
How can I revert it back to WM 6????
HELP.
Should I Hard reset it( by pressing several keys+stylus)??
Or should I hardSPL it again and flashing the WM6 Rom back??
rglive2008 said:
My TYTN 2 (KAISER) came with the original WM6...But I upgraded/flashed it to WM 6.5 and that kinda sucks for me...
How can I revert it back to WM 6????
HELP.
Should I Hard reset it( by pressing several keys+stylus)??
Or should I hardSPL it again and flashing the WM6 Rom back??
Click to expand...
Click to collapse
First of all this is Android development so this is very offtopic. Second you hopefully can find and download the correct WM version from HTC by entering your S/N. Then I think all you need to do is to hold camera button + reset the device to enter SPL, connect to computer with USB cable and then run the installation (that you downloaded from HTC).
Hi Kalit_Kaffe, Thnx for the Help. Was helpless...thts Y had to post it here.
Anyways...is the hard reset(holding camera button...the soft buttons and stylus) the same as Factory restore??...then i wouldnt be needing the file that you mentioned for download??
Am i right?
Reset to factory defaults will not replace the 6.5 rom you have installed, you don't need to HardSPL again, that only needs to be done once.
Your best option would be to get a stock rom from the XDA Wiki pages, My advice would be either get a shipped rom that matches your carrier, or the latest generic HTC shipped rom, both can be found here: http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs
Note that once you flash a rom a Hard reset does not remove it, only flashing another rom will do that. Also flashing a stock rom is actually one of the best ways of clearing out previous flashes.
hi
Hey man thnx a lot! really helps!
HELP!!!!!!!!!
How do I install the USB driver for HTC TyTN II, to whom I am the Android 1.5. Before that I was a Windows Mobile 6.5 and am using Microsoft ActiveSync. I would like again to get back to WM 6.5, but can not seem to connect mobile phone and computer.
You can't flash back to Windows Mobile through usb while in Android because of the driver issues. You have to either enter bootloader mode and flash, or you have to do it through your storage card. And before you post back asking me how to do that, use the search. There are instructions all over the place.
thank you very much I was able through bootloader mode
does anyone know what is the best WM for HTC taytn 2? I am installing TPC_Kaiser_Titanium_Ultimate_28002, it's not something particularly good
There is no *best* ROM. Please read threads and flash based on your needs. I think it's about time this thread be done for.
rglive2008 said:
My TYTN 2 (KAISER) came with the original WM6...But I upgraded/flashed it to WM 6.5 and that kinda sucks for me...
How can I revert it back to WM 6????
HELP.
Should I Hard reset it( by pressing several keys+stylus)??
Or should I hardSPL it again and flashing the WM6 Rom back??
Click to expand...
Click to collapse
Looks like you need to downgrade your Hard SPL for WM6 so that it doesn't pause a lot.
http://forum.xda-developers.com/showthread.php?t=498320
Also there seems to be a guide for what you want. Sorry I stopped reading through the threads when I saw someone say you don't need to do anything with your hard spl.
http://forum.xda-developers.com/showthread.php?t=335568
hi all, i must say that i really tried to search the solution but all i got
were referring flashing for cooked rom or if i had cooked rom and want to go back to the original.
i had to hear your opinion
as bought my htc tytnII with wm6.0, i went to htc support site and upgraded to official 6.1 os
(HTC TyTN II - Windows Mobile® 6.1 Professional Upgrade)
and then i moved to serch heb support, and found installation that run threw the pc.
after the installation i weren't happy with the results, and i even have adv commercial on botscreen.
so i turn to the HR, i thought it will give me again.. fresh start.
but right when he started to configure the system and started restarting
the heb support and the adv was there!
i just want pure start, with no leeching installations that beyond my control.
so im asking if reinstalling the upgrade from the htc site will give me what i seek?
i had to ask, i herd the word brick and got afraid..
although in the downloading screen in htc site it said:
"If it is the same version and your device is operating normally, there is no need to reinstall the software."
thanks in advance,
yaniv
Moved as not ROM Development.
You can reinstall the software from the HTC with no worries. If the rom is not meant for your device, it will not install.
The only way to harm your phone , really , is if your phone is currently running a cooked rom, and you try to flash a rom for another model of phone.
You are going to have bootscreens on every rom, windows screens, HTC screens, carrier screen, they may seem like advertising to you, but they are just normal bootscreens. If you do not like them, there are several threads here on changing and installing custom bootscreens and splash screens.
straight out of the Kasier Wiki.
http://forum.xda-developers.com/showthread.php?t=335568
denco7 said:
You can reinstall the software from the HTC with no worries. If the rom is not meant for your device, it will not install.
The only way to harm your phone , really , is if your phone is currently running a cooked rom, and you try to flash a rom for another model of phone.
You are going to have bootscreens on every rom, windows screens, HTC screens, carrier screen, they may seem like advertising to you, but they are just normal bootscreens. If you do not like them, there are several threads here on changing and installing custom bootscreens and splash screens.
Click to expand...
Click to collapse
thanks bro! its really helped me out..
Hi, if anyone could please help me i would be gratefull, i recently purchased a D2 but its already preloaded with WM6.5 rom version 2.53.405.5 (76952)WWE, But i really wanted WM6.1 as, among other things, i wanted to use the handwriting rec.
does anyone know what stock rom to reload? and where i can get it? sorry to ask such a basic question.
thanks in advance,
http://www.htc.com/europe/SupportDownload.aspx?p_id=249&cat=2&dl_id=613
thanks for that, however it seems to have just bricked the phone
thanks for that, however it seems to have just bricked the phone
it seemed to work, all the correct messages displayed
but......
now all that happens is it turns on, shows the touch diamond2 screen, then resets
it has the following text in red in the lower left hand corner
r 3 . 43. 25 .19
g 61. 20t. 25. 10U
d 1. 39. 47382
does any one have any ideas?
Try to hard reset.
tried that before i posted
and a soft reset, and another hard reset to be sure,
i searched the forum but couldn't find any reference to that type of error either.
any ideas on how to retrieve it from paperweight mode?
Download stock ROM for your region
Unpack it with WinRar or TotalCMD
Rename RUU_signed.nbh to topaimg.nbh
Copy topaimg.nbh on your SD card
Enter bootloader (hold volume down and turn on phone) and follow instructions
edit:I guess for wm 6.1 you need lower version of SSPL
thanks dude, i used the bootloader to reinstall the latest rom from HTC.
Topaz_S2_HTC_WWE_2.53.405.5_Radio_Signed_Topaz_61.44etc.25.35_4.49.25.91_Ship
my phone is no longer a brick however i am back to square 1 in that i still have wm6.5, and i want 6.1
ive tried to reflash with the older rom fighter7139 suggested
RUU_Topaz_HTC_WWE_1.39.405.3_Radio_Signed_Topaz_61.20t.25.10_3.43.25.19_Ship
but it gives me the same rebooting error.
any ideas why wont the older rom work on my phone? or if theres an alternative to that rom ?
thanks
I've loaded hardspl 1.83 and extracted the file RUU_signed.nbh and renamed it to topaimg.nbhand,
i moved it to the SD card, reflashed the phone with the 6.1 rom,
but i get the same error.
any idea on what rom i should use to update from?
or what stock spl i'd need to run this rom's version of 6.1 ?
a thought
maybe i don't even need 6.1, all i want to do is to fix two things -
1) make the sms messaging work like on the old htc devices ie diamond or tytn ie not use htc messaging
2) add handwriting recognition
- would also be nice to have the taskmanger icon, the battery icon and the original windows start menu back too, but im not dependent on them....
so i guess any rom would do that allows these functions, any help or info on this would be much appriciated
terminalkhaos said:
1) make the sms messaging work like on the old htc devices ie diamond or tytn ie not use htc messaging
Click to expand...
Click to collapse
Try http://forum.xda-developers.com/showpost.php?p=3771519&postcount=2991
2) add handwriting recognition
Click to expand...
Click to collapse
http://www.htc.com/www/SupportDownload.aspx?p_id=249&cat=0&dl_id=824
thanks for that, however that was the first thing i tried, i saw the download for the handwriting ap just after i got the phone, not knowing it didnt have it when i swapped from my diamond,
the thing is the update only works on certian AP version control builds -
the message on the site is -
Note: AP version control -> The criterion will pass if the Touch Input for Pocket is equal to Version 2.1 (Build1919.1320), or lower.
mines a higer version, which i assumed originally had to do with it being wm6.5 not 6.1,
- i have tried downloading and installing anyway but it wont load.
does anyone know how to get this update to load, or how to change the AP version control back to a lower version ?????
any help would be much appriciated.
if it matters,
i'm running Duttys HG, and ive flashed to hardspl,
i don't mind flashing back to whatever, i just really need the handwriting app
The handwriting SIP is likey hidden.
There is a reg edit to unhide, just search SIP Reg Edit and you should find it.
If I recall it was under the WM general tweaks.
thanks for that, i got the letter and block rec working, but still not the transcriber the reg key shows it should be showing, but i think the actual file may not be there,
fixed after changing the reg, and downloading the update, you then need this transcriber cab
http://forum.xda-developers.com/showpost.php?p=3661845&postcount=47732
result
Any luck finding a way to get 6.1 working on this phone? I just bought the Pure from AT&T as a replacement for my LG Incite that had 6.1 on it. So far I can't stand 6.5 at all. My main beef is with IE, I really like the one on my Incite vs. this one. And my other problem is with the start menu, I also prefer the drop-down style in 6.1.
Thanks for any replies or help.
TheNorthSideWhiteGuy said:
Any luck finding a way to get 6.1 working on this phone? I just bought the Pure from AT&T as a replacement for my LG Incite that had 6.1 on it. So far I can't stand 6.5 at all. My main beef is with IE, I really like the one on my Incite vs. this one. And my other problem is with the start menu, I also prefer the drop-down style in 6.1.
Thanks for any replies or help.
Click to expand...
Click to collapse
Start here.
Once you unlock your phone, you can flash to anything you want.
6.5 is hands down better than 6.1, there are 6.5.219xx builds that have the drop down start menu.
Thanks Bruce!
For some reason I couldn't find a good Pure forum, so that link helps a lot.