i have tried the SSPL and it works, i can flash the 3 roms i have found for the breeze
RUU_BREE100_1.13.251.2_1.06.00.10_QtekEUR_Ship_R3
RUU_BREE100_1.32.251.1_1.29.00.10_HTC
RUU_BREE100_1.34.251.1_1.38.00.10_HTCEUR_SHIP
but since i flashed the 1.38 radio rom without using this sspl. whenever i use the sspl i can only flash the rom not the radio. my phone is now stuck on the 1.38 radio which drops calls after about 30 mins and the battery life is really crap, i am on area where u get full 2g or 1 bar of 3g so its doing its trademark searching and killing the battery.
I have tried duttys tool with the radio extracted and put on the SD card and flashed but no joy.
my device is not SuperCID i just use the SSPL to bypass it.
anyone got any ideas how i can flash the 1.29 radio or for that fact any radio to phone instead of the rom?
i've read that many have tried 1.20 radio to solve a few problems but i have no idea how i can flash this. I have tried to make my own rom with the tools here but again they just flash the new OS living the radio 1.38.00.10. i am downloading RUU_Radinly_1.20.31.10.exe and will flash it if i knew how. SSPL just turns around and says invalid ID error 244. so its like the radio isn't designed for this device.
anyone got any idea ?
1.29 is even worse than 1.38... Missed calls in full GSM coverage (4 bars), horrible sound quality (either you or called party can't hear most of the conversation)... Don't even try it!
And concerning the problem not being able to flash new radio:
As I already wrote in this thread, flashing Radio ROM 1.29 (and above) also flashes new Radio Bootloader 0108 (different thing than Phone bootloader) which requires SPL 1.09 (or newer) to flash Radio ROMs.
Current SSPL for Breeze is based on some older SPL which, as you found out, isn't compatible. Until someone creates SSPL for Breeze based on SPL 1.09 or SPL 1.10, you're stuck just like me...
thanks very much for the post explaining it. i have read someone might make a new sspl with the new spl's in mind so as you said, we have to wait and i guess i will. i am however going to send my breeze back to HTC because of the constant dropping of calls whether it is 10seconds or 35 mins, it drops it without fail.
Good afternoon, people!
Yesterday I wanted to renew my Radio firmware in my X1 and found a thread about new 1.14 radio. But I've got a lot of questions about how to do it and do I need to patch something, why do I need some dll's, what NK.exe patching is, etc. I've asked fards and he kindly explained everything(thank you again, dear fards!)
So now I just want to share the experience. Just to make some people's life a bit easier
Here it comes, the FAQ. It's 50% consists of fards answers and 50% of my knowledge. But my knowledge definitely owes this forum and fards
Q: What do I need to upgrade my Radio to the latest one? (it's for those who doesn't want to know technical details and wants just newer X1 radio, nothing more)
A:1. HardSPL your X1.
2. Go here and get whatever radio you want, but ONLY from "XPERIA X1 RADIOS" section.
3. Remember three things:
- FLASHING A RADIO SHOULD NOT DELETE/RESET YOUR PHONE INFO
- FLASHING A RADIO LASTS APROX. 1 OR 2 MINUTES ONLY
- YOU ARE FLASHING THIS RADIO AT YOUR OWN RISK4. Go through one of methods below:
1) MICRO SD FLASH METHOD
FIRST:
- Charge Xperia X1 > 50% (100% if possible)
- Prepare a micro SD card: format to FAT32 with default block size
- USB cable must be disconnected from PC or power outlet (mains)
STEPS:
- Rename the radio file to KOVSimg.nbh
- Copy to micro SD card's root directory
- Insert micro SD card in the phone
- Remove and reinsert phone battery
- Go to bootloader mode (hold vol key + power key)
- Follow on-screen instructions
- When flash finishes remove/insert batter and power on
Not flashing?
a) Format another micro SD card (FTA32, default block size) and try again
b) Use the RUU method from PC
2) RADIO UPDATE UTILITY (RUU) FLASH METHOD
FIRST:
- Charge Xperia X1 > 50% (100% if possible)
- Be sure your phone is connected to PC
(XP: activesync, Vista: Windows Mobile Device Center)
- Win Vista: install latests .NET frameworks and WMDC 6.1
STEPS:
- Download the RUU FOR XPERIA X1
- Extract the RUU files to a folder
- Copy only one radio file to that folder
(renaming the *.nbh file is not required)
- Run Xperia X1 RUU app
- Follow on-screen instructions
- When flash finishes disconnect USB, reinsert batter and power on
Q: Where can I view current radio version?
A: In Start->Settings->System->Device Information->Radio version.
Q: Where can I check and get latest radios for my Xperia?
A: In our forum's Xperia library at "III - TRANSMITTER RADIOS" section.
Q: What's the difference between "Xperia X1 Radios" and "RADIOS FROM OTHER HTC DEVICES", can I use it?
A: Just to make things clear: "Xperia X1 Radios" are taken from different X1 ROMs(so it's X1-compatible by default), "RADIOS FROM OTHER HTC DEVICES" are correspondingly from other HTC devices(so generally it needs things to be done with it to be X1-compatible). BUT there are already done those "things" with radios from different HTC devices(Hex-edited, adapted and tested on a security-unlocked Xperia X1) in our Xperia library, so those radios are already X1-compatible too.
Q: What radios can I practically(with or without damage) flash into my Xperia?
A: You always can flash your original(ROMs) radio. But to flash another radio(not from your current ROM) you need to change HardSPL on your X1 once. Then you can flash any radio you want, but with risk of doing much damage.
Q: Where 1.14 radio came from? Is this radio custom or "handmade"? Or it came from R3A? Where is it from and why SE isn't updating it?
A: Its from lantin american R2AA015 rom... Id expect a newer one with r3 when its released.
Q: What radio is the best one so far?
A: I think the 1.14 is the best radio so far, it is a bit battery greedy, but it does work very well.
Q: After I flash this radio(or the previous one - 1.11.25.76), do I need rilphone.dll to copy to my phone with R2A010?
A: Its not essential but as newer radios are released then different commands seem to added to the RadioInterfaceLevel hence RILphone so ireckon its a good idea.
Q: As I've understood, this rilphone.dll is not the same as patching radio and doing some magic with mysterious NK.exe, right? So even if I want to flash radio version 1.11.25.76, having version 1.06.25.29, I should change this dll? Where should I find it for any listed there Xperia Radios?
A: The rilphone is an translator from the standard windows RIL.dll to the new radio part.
as new radios come out they can (but not always) contain new commands, so it makes sense to use the new rilphone from the same rom as it has those new commands in it, so that the OS can make use of them.
This is why it seems it's best to use the same rilphone as the radio version. I'd imagine the rilphone would come with the rom that the radio was originally taken from.
For example the R2 roms have a new radio attached, so if you flash that rom you'll automatically get the correct rilphone.
Q: Do I need to make a hardreset after I flash the radio?
A: No, hard reset is only for full ROM not radio.
Q: I saw some info about mysterious NK.exe and some radio patching. Why do I need it? Only for making radios from another phones working with mine? For example, if I have Raphael radio and I want it to work on my X1 - I should patch it, am I right? But what if I have XPERIA X1 RADIO from this link? Should I patch it?
A: Patching the NK.exe is really for running unsigned Dll files and exes (from startup or during boot at least) as NK checks the intergrity of core system files I think.. It is just ones loaded during startup I think as When you're in windows the registry settings or certifcates (such as the ones skcert.cab installs) take over.
So you don't need it for just the radio part, but really for the rilphone.dll this stops it from being overwritten by the signed exisiting one in the rom. HOWEVER. using driverwiz (from chainfire) gets around this, as that prog signs the files with a "dummy" certificate, so windows recognises it's signed and uses it..
Most of the custom roms (even the ones that are done by people who don't know what they're doing and just press a button) should contain a patched NK as it's part of the kitchens. It's pretty much essential on a custom rom otherwise you couldn't add anything to it!
If you still have some questions and want more info, take a look at this Radio thread, it's "full of useful info" (c) fards.
And I think anyone can ask radio questions in this thread. And if anybody helps you - I'll edit the first thread and add there his answer.
P.S.: This is post is owned for emergency info
Nice one, thanks!
Q: Where 1.14 radio came from? Is this radio custom or "handmade"? Or it came from R3A? Where is it from and why SE isn't updating it?
A: Its from lantin american r2 rom... Id expect a newer one with r3 when its released.
You shouldt edit this the radio came from LatinAmerica LAM R2AA015
(1.03.947.15), extracted from it and uploaded by fulgore69..
Give some credit....
Also give some credit to Xperia Library to Gtrab
And of course to all forum
Just and advice...
Dont take it personal or the wrong way..
Just posted it here to keep this thread alive
Hope someone make it sticky
And i want to say great thread too...
Lots of knowledge in it....Keep doing it so well...
hope this post will help to minimize the ammount of ubiquitous questions
will link from the Library
Thanks J-pro
have any of you heard of whats a better Radio ROM for use in South east asia or maybe probably china. the new 1.14 ROM is fine on its gps lock. but i still experience signal drops which is extremely annoying. i would send a text only to find out the sending failed bec the signal dropped again. i think this is due to the fact that the x1 never really officially got into China. any suggestions?
hi..i have a question..could you please define first rilphone.dll,and what does it do?where can i download it?i have installed the latest radio (as of now) 1.14,where could i download the appropriate rilphone.dll for it..thanx,this thread i hope could answer most of newbies having their x1..
tranquil20 said:
hi..i have a question..could you please define first rilphone.dll,and what does it do?
Click to expand...
Click to collapse
The answer is in first post, pay more attention please:
J-Pro said:
Q: After I flash this radio(or the previous one - 1.11.25.76), do I need rilphone.dll to copy to my phone with R2A010?
A: Its not essential but as newer radios are released then different commands seem to added to the RadioInterfaceLevel hence RILphone so ireckon its a good idea.
Q: As I've understood, this rilphone.dll is not the same as patching radio and doing some magic with mysterious NK.exe, right? So even if I want to flash radio version 1.11.25.76, having version 1.06.25.29, I should change this dll? Where should I find it for any listed there Xperia Radios?
A: The rilphone is an translator from the standard windows RIL.dll to the new radio part.
as new radios come out they can (but not always) contain new commands, so it makes sense to use the new rilphone from the same rom as it has those new commands in it, so that the OS can make use of them.
This is why it seems it's best to use the same rilphone as the radio version. I'd imagine the rilphone would come with the rom that the radio was originally taken from.
For example the R2 roms have a new radio attached, so if you flash that rom you'll automatically get the correct rilphone.
Click to expand...
Click to collapse
tranquil20 said:
i have installed the latest radio (as of now) 1.14,where could i download the appropriate rilphone.dll for it
Click to expand...
Click to collapse
In 1.14 thread.
my bad, i missed that part,hehe. thanx bro 4 the answers
Correct me if i am wrong
But i think that you must have hard-spl your phone to flash any radio this include original xperia radios...
Actually you can only flash without hard-spl only if you flash the full original rom image that include the radio, os, splash1, splash2 and of course the corresponding original spl inside....
Q: What radios can I practically(with or without damage) flash into my Xperia?
A: You always can flash your original(ROMs) radio. But to flash another radio(not from your current ROM) you need to change HardSPL on your X1 once. Then you can flash any radio you want, but with risk of doing much damage.
Fulgore69 said:
Q: What radios can I practically(with or without damage) flash into my Xperia?
A: You always can flash your original(ROMs) radio. But to flash another radio(not from your current ROM) you need to change HardSPL on your X1 once. Then you can flash any radio you want, but with risk of doing much damage.
Click to expand...
Click to collapse
but with risk of doing much damage??
what you mean damage? many cooked roms with our radio and if seperately i install radio what much damage for device? can you pls explain me
regards
newstar said:
but with risk of doing much damage??
what you mean damage? many cooked roms with our radio and if seperately i install radio what much damage for device? can you pls explain me
regards
Click to expand...
Click to collapse
he meant "without much damage" it's a typo
However
if you install a bad radio then there's lots of things that can go wrong..
newstar said:
but with risk of doing much damage??
what you mean damage? ... can you pls explain me
regards
Click to expand...
Click to collapse
I think it wasn't a typo. I wrote 'any' radio, so the risk does exist if it will be 'bad' radio, like fards said.
There is written which radios are good to flash, but somebody may get radio from iphone for instance(i know it may be impossible, but just for you to understand) and flash it in X1 without any chance for it to work. That's the damage. Flash only checked radios to prevent any damage. And as usual, you do it on your own risk.
WTF... when following your guide how to flash via RUU Update, my phone made a hard reset. But the newer radio is installed. Weird...
This seems to be a few stupid question that i cannot find answers to.
Why flash one radio over another? What does updating my radio do for me?
Also I live in the US and if i flash a radio will it change the 3g bands available to me?
Thanks.
well, this might be the singel most dumb Q but ayway; what does a new radio do? im new to this.
Well, so far as I know it affects the whole recieve/transmitter section of the phone. As in, phone, 3g/hsdpa, bluetooth, Wi-Fi, GPS, etc.
I am still running 1.10.25.18. I don't have any issues atm, but are people experience any improvements in later radios?
ty for that info. sonds like it would ock my world.
currently i have like the worse reseption/no reseption at my appartment and i live in the middle of a big city.
please upload radio update utility
sooooo where do i find the radio that i just flashed?
Hello everyone and sorry for starting a new thread with so many threads already about installing custom ROMs. So sorry again....
First of all I want to say that I have installed Saturday my first custom ROM.
1. I installed HardSPL
2. I installed ROM (I got an error first time because my usb got diconnected - tricolour boot screen and an error code - could not see it; second time everything worked fine and I have now a new great looking ROM
3. I did not installed Radio.
1st question: Do I have to install Radio everytime I install a new ROM or is it ok if I keep my old Radio? - the phone works just fine.
Second question: Do I have to HardSPL everytime I install a new ROM?
Please be kind and reply to my questions even if it must have been already posted in some thread.
rarely can i answer a question but yours are easy LOL
You don't need to do your radio because the radio you have is untouched by roms.
Likewise if you do a radio it wont change your rom.
Radio's probably will not make much diffrence.
Once you have Hard spl it is done.
You can then flash as many roms as you want , but Hard Spl is just once
No and No.
Thank you guys.
The radio is stored on a different part of the memory then the ROM, so it doesn't get replaced when you flash a ROM (unless the ROM specifically includes it, like the new "official leaked" ATT ROM). And custom ROMs will never include the radio, that I know of.
A newer radio version MAY get you better battery life or GPS reception. But it can be very specific to your geographic location. It your choice whether to update your radio or not, its certainly not required. If you want, you are free to experiment, as you can always go back to the old radio if the new one doesn't work out. The process for flashing a new radio is essentially the same as flashing a ROM, except the actual process if done very fast.
As already mentioned, you only need to HardSPL once. The only way phone will become SPL locked back to factory condition is if you specifically do so using the provided relocker program on the SPL thread (for instance, to return the phone for warranty repair).
Hi,
I am rather new to the G1 section and sorry if this is a stupid question.
I have an unlocked Rogers HTC Dream 9used on Bell) and my current radio and spl are: 3.22.26.17 and 1.33.2005. I was wondering if it is recommended if I upgrade to the new radio (2.22.28.25) and SPL (1.33.0013d). I was wondering what the the advantages (besides the ram increase) of a 2708+ kernel.
Thanks.
The ram increase is enough of a reason to update. I also had some random lockups on the 3.xx radio.
Okay thanks for the info. Your input is appreciated.
I wouldn't do it until battery drain issues are resolved, i know it's a problem for a lot of people. Rebooting after unplugging isn't a good answer to the problem either
If your existing setup is working fine now, why take the chance of f'n it up for the possible promise of something better?
If, on the other hand, you're existing setup is all f'd up ...or otherwise not working out for you ...then go for it.
What is the latest Radio Update for the G1 that i can use so i can make sure im getting the best possible connection cause i just got the unlimited data plan today, and i wanna make sure it as great as possible, thx
2.22.28.25 but you will need to flash a perfected spl to avoid brick.
umm its for usa t-mobile g1/dream phones rite? and if so where is the page? and where is this spl
Yes, it is for USA G1 and I have tested it before. I do not use it anymore because it is a perfected SPL and I find it annoying to not be able to use all the functions of fastboot.
http://forum.xda-developers.com/showthread.php?t=831139&highlight=2708
Please read the instructions thoroughly. If your device does not boot after applying update, then i will link you to a dreaimg.nbh to return to rc29 to root, and flash your custom rom again.
did you use it on CM6-DS? or what rom did u use it on? and is it better than the 2.22.23.02 radio?
I feel it is about the same.. The reception is the same except for the extra 15mb memory available, there really isn't a difference. It's not worth it for me giving up the danger-SPL with all the fastboot functions for the perfected SPL with only 2 options.
I used it on CM6.1-DS.