Related
I know this has been beat to death in the Hermes forum but I have found a bit of difference with my Kaiser as compared to my Hermes.
I have quite a bit of experience with the TyTN hermes tweaks to get Microsoft Voice Command to work with the Hermes but not only will the Kaiser NOT work without the tweaks - I can't get it to work with the tweaks.
I followed the exact instructions like I always have listed in the Hermes Wiki section titled Utilities and Software Tweaks (including Bluetooth Voice Command installation and the Registry changes). However after the changes I cannot initiate a Bluetooth instruction via the Bluetooth device. If I initiate the call via the handheld it works great as far as stability and sound quality.
Any suggestions?
You don't have to do any tweaks on Kaiser! Just install VC 1.6. Assign Button 6 to Voice command. Soft reset. It should work. Works for me at least. The only think that doesn't work is a caller name announcement.
ID64 said:
You don't have to do any tweaks on Kaiser! Just install VC 1.6. Assign Button 6 to Voice command. Soft reset. It should work. Works for me at least. The only think that doesn't work is a caller name announcement.
Click to expand...
Click to collapse
Ditto,
My Kaiser does announce incoming callers on the internal speaker when the setting is on "use bluetooth if available". I only use bluetooth with my car so I do not know what the behavior with a headset would be.
Does it work so that you can push the button on your Bluetooth headset or Bluetooth car adapter and then give the Voice Command through the headset? Mine didn't work. That's why I did the tweaks.
Also can someone tell me that with just the Voice Command installed what does the following registry key have (or does it even exist)?:
HKLM\SOFTWARE\OEM\VoiceCommand\Path = ????
AND
HKLM\SOFTWARE\Microsoft\Bluetooth\AudioGateway\BTAGExtModule = ???
Also if you go to settings and click on Voice Command - what version Voice Command do you have? I have v1.6.4622.0
Thanks
GenesysLV,
Can you please check build number of your VC 1.6?
Thanks.
ID64 said:
Can you please check build number of your VC 1.6?
Click to expand...
Click to collapse
Not terribly related, but v1.60.4622.0 is what my copy reports as well - though I'm still on a Hermes. I believe that's the retail release, I've not seen any indication of another one....
Richard
ID64 said:
GenesysLV,
Can you please check build number of your VC 1.6?
Thanks.
Click to expand...
Click to collapse
I have the same version number. Is there a different place to actually check the "build" ?
jcrompton said:
I have the same version number. Is there a different place to actually check the "build" ?
Click to expand...
Click to collapse
If you go to VC settings, please go to about or something like that. There you will see full version number.
Thanks
yep
its the 1.6.4622.0 version
jcrompton said:
yep
its the 1.6.4622.0 version
Click to expand...
Click to collapse
Thanks Just to confirm: you can hear callers name over your BT car handsfree?
ID64 said:
Thanks Just to confirm: you can hear callers name over your BT car handsfree?
Click to expand...
Click to collapse
Hmm... Looks like I have build 1.60.4630.0
Hi, I have build v1.60.4622.0 and I noticed a fundamental difference when installing to my kaiser than when installing to my Uni; no registry entries get added to:
HKLM\Software\OEM\VoiceCommand
So this means that no bluetooth interaction would work. Therefore I added:
Dword entry: LaunchAPEnable (value 0)
and
String entry: Path (value \Program Files\Voice Command\voicecmd.exe
Rebooted and now voice command is initiated fine via bluetooth headset. Haven't tested notifications yet - I think there might still be a missing reg entry but I can't remember what it is!
Hope this helps someone....
Thanks. I'll try those registry changes. I hard reset last night to make sure that I got rid of all of the "tweaks" that had been done - the way I did for the Hermes.
I wonder where the other guy got version 30 instead of our version 22
I got mine from Handango - the Microsoft site doesn't have any updates except for version 1.5
ID64 said:
GenesysLV,
Can you please check build number of your VC 1.6?
Thanks.
Click to expand...
Click to collapse
No problem. v1.6.4622.0
I should have caught up on the thread first. Just to be claer, I do not hear the callers name through my car. I do hear it only on the Kaiser's speaker.
I'd love to get the announcements working over BT. It was sporadic on my TyTN with the registry hacks.
captainsensible2002 said:
Hi, I have build v1.60.4622.0 and I noticed a fundamental difference when installing to my kaiser than when installing to my Uni; no registry entries get added to:
HKLM\Software\OEM\VoiceCommand
So this means that no bluetooth interaction would work. Therefore I added:
Dword entry: LaunchAPEnable (value 0)
and
String entry: Path (value \Program Files\Voice Command\voicecmd.exe
Rebooted and now voice command is initiated fine via bluetooth headset. Haven't tested notifications yet - I think there might still be a missing reg entry but I can't remember what it is!
Hope this helps someone....
Click to expand...
Click to collapse
THANKS!
This needs to go into the Kaiser WIKI !!!
These registry changes are needed inorder to be able to initiate phone calls from your bluetooth device using Microsoft Voice Command. These registry changes worked GREAT and the initiation of calls from bluetooth work much better than with the Hermes and it's tweaks.
Of note, using Resco Registry editor, I had to put quotes aroung the Path entry to get it to work so my registry edit looked like this:
Path Value= "\Program Files\Voice Command\voicecmd.exe"
If anyone knows how to get attention to have this put in the Wiki please feel free.
Odd, I did not have to edit/add any registry settings and I can initiate calls/commands from my BlueAnt Z9 headset.
________________________
HTC TyTN II (Kaiser) / WM6
greg3d said:
Odd, I did not have to edit/add any registry settings and I can initiate calls/commands from my BlueAnt Z9 headset.
________________________
HTC TyTN II (Kaiser) / WM6
Click to expand...
Click to collapse
? using Microsoft Voice Command ??
I used several different headsets / devices and no luck until I made the registry additions. What ver of Voice Command do you have?
Can someone turn this into a CAB?
Thanks
jcrompton said:
THANKS!
This needs to go into the Kaiser WIKI !!!
These registry changes are needed inorder to be able to initiate phone calls from your bluetooth device using Microsoft Voice Command. These registry changes worked GREAT and the initiation of calls from bluetooth work much better than with the Hermes and it's tweaks.
Of note, using Resco Registry editor, I had to put quotes aroung the Path entry to get it to work so my registry edit looked like this:
Path Value= "\Program Files\Voice Command\voicecmd.exe"
If anyone knows how to get attention to have this put in the Wiki please feel free.
Click to expand...
Click to collapse
jcrompton said:
If anyone knows how to get attention to have this put in the Wiki please feel free.
Click to expand...
Click to collapse
Ummm, the whole POINT of a Wiki is that users can add to it themselves, so feel free to update the Kaiser section.....
Richard
GenesysLV said:
Ditto,
My Kaiser does announce incoming callers on the internal speaker when the setting is on "use bluetooth if available". I only use bluetooth with my car so I do not know what the behavior with a headset would be.
Click to expand...
Click to collapse
I have tried this option but does not seem to announce calls.
Hope someone can find a fix.
Thanks
Hi all,
due to the fact my provider has now started charging me for accessing voicemails and will not include voicemail access in my inclusive minutes I have turned off the voicemail answerphone on my t-Mobile MDA Vario III (Kaiser), what i'm looking for is a programto run on the PDA that will answer a call after say 45 seconds of ringing and act like an answerphone and record any messages direct to the PDA. I have searched for answerphone but without luck and the only program I can find via Google is iSecretary, but that aparantly isn't fully compatable with the Kaiser?. Has anybody got any ideas as to anything else available that will do this job, preferably free but if I have to pay for the ideal solution so be it.
Thanks
MI5
Sorry, did not read full post.
vip3r69 said:
Sorry, did not read full post.
Click to expand...
Click to collapse
Very helpful, indeed...
htc_mi5 said:
Hi all,
due to the fact my provider has now started charging me for accessing voicemails and will not include voicemail access in my inclusive minutes I have turned off the voicemail answerphone on my t-Mobile MDA Vario III (Kaiser), what i'm looking for is a programto run on the PDA that will answer a call after say 45 seconds of ringing and act like an answerphone and record any messages direct to the PDA. I have searched for answerphone but without luck and the only program I can find via Google is iSecretary, but that aparantly isn't fully compatable with the Kaiser?. Has anybody got any ideas as to anything else available that will do this job, preferably free but if I have to pay for the ideal solution so be it.
Thanks
MI5
Click to expand...
Click to collapse
I'm afraid there is no solution, because of the limitations of the Kaiser (and many HTC devices) with the incoming sound.... (mic only)
A workaround should be available in iSecretary, recording loudspeaker -> mic, but this application crashed a lot on my Kaiser so removed it...
Also because it is not a nice solution anyway...everybody can 'enjoy' the voice message.
Zoolooc said:
Very helpful, indeed...
Click to expand...
Click to collapse
Sarcasm does not suit your hair style, I did say sorry.
vip3r69 said:
Sarcasm does not suit your hair style, I did say sorry.
Click to expand...
Click to collapse
OK, I hurried myself to answer, it was still the leftover text making me think that the answer wasn't helpful, as seeing the thread's subject first made me hope to actually find something helpful (wondering why there isn't such an application anyway). Sorry.
Zoolooc said:
(wondering why there isn't such an application anyway). Sorry.
Click to expand...
Click to collapse
because of the limitations of the Kaiser (and many HTC devices) with the incoming sound.... (mic only)
Optimistisch_nl said:
I'm afraid there is no solution, because of the limitations of the Kaiser (and many HTC devices) with the incoming sound.... (mic only)
A workaround should be available in iSecretary, recording loudspeaker -> mic, but this application crashed a lot on my Kaiser so removed it...
Also because it is not a nice solution anyway...everybody can 'enjoy' the voice message.
Click to expand...
Click to collapse
According to iSecretary the TYTNII is only "half supported" but it looks it would do everything you want.
- lifts the handset automatically when the preset time expires;
- plays the file to the caller;
- records your caller's message within the limits of preset time and hangs up;
Click to expand...
Click to collapse
(http://www.isecretary.net/about.php)
check your voicemail using a landline...
I guess i'll have to try isecretary and see if it does enough to get me going, unfortunatly checking voicemail via a landline is not an option in my situation.
Thanks for all the replies so far.
MI5
htc_mi5 said:
I guess i'll have to try isecretary and see if it does enough to get me going, unfortunatly checking voicemail via a landline is not an option in my situation.
Thanks for all the replies so far.
MI5
Click to expand...
Click to collapse
just be prepared.... you will be disappointed...
I did try iSecretary and it worked on some of the calls, about 2 out of the 10 I made to my phone. And like "Optimistisch_nl" said: the callers voice is on loudspeaker while leaving the message. Also the message that I recorded to tell people to leave a message doesn't play either for the caller.
Sorry dude, I'm also still looking for something like this and will let you know if I find a solution.
# Zoolooc # Apology accepted and I also apologize for my remark.
vip3r69 said:
I'm also still looking for something like this and will let you know if I find a solution.
Click to expand...
Click to collapse
You won't find a solution unless you buy e.g. a Nokia.....
Guys, ALWAYS check out the Wiki first. I've answered this very question at http://wiki.xda-developers.com/inde...nswering machine for Windows Mobile released!
(also see the group http://wiki.xda-developers.com/index.php?pagename=Audio and call recording, answering machines )
In a word: no, don't expect much - WinMo is, by default, pretty much useless when it comes to local (!!) nswering machines. Should you really need them, go for Symbian.
Optimistisch_nl said:
You won't find a solution unless you buy e.g. a Nokia.....
Click to expand...
Click to collapse
Yup, it works wonderfully on my Nokias...
Optimistisch_nl said:
You won't find a solution unless you buy e.g. a Nokia.....
Click to expand...
Click to collapse
I was also told that file sharing on WM is not possible by "CLEVER" people, but hypest told me that by setting up a ftp server on the ppc you could share folders that would be visible and able to be browsed by another ppc. Now if that is not "file sharing" then lets call it "sharing files". It works just the same as normal file sharing on Windows.
( http://forum.xda-developers.com/showthread.php?t=374249 )
Where there is a will there is a way.
vip3r69 said:
I was also told that file sharing on WM is not possible by "CLEVER" people
Click to expand...
Click to collapse
You should have asked me I've even reviewed & thoroughly compared FTP clients (along with mentioning FTP servers) for Windows Mobile - search for example for 'vxFtp' in the Wiki.
How to enable Phone Book Access Profile (PBAP) on ATT Tilt?
I need to transfer phone book to accord bluetooth & it need to enable PBAP on phone.
Thanks in advance & helping out..
I am only aware of this application: http://www.jetwaremobile.com/
If there exists another alternativ, feel free to post it.
TDO
TDO said:
I am only aware of this application: http://www.jetwaremobile.com/
If there exists another alternativ, feel free to post it.
TDO
Click to expand...
Click to collapse
I've done some research on this and I beleive that is the only app that works.
Thanks guys, I will try it today & update you whether it sync. the phone book with Honda Accord Hands free link or not?
Thanks again!
abhiku said:
Thanks guys, I will try it today & update you whether it sync. the phone book with Honda Accord Hands free link or not?
Thanks again!
Click to expand...
Click to collapse
I'm not sure I understand your question??????
MorKaiser said:
I'm not sure I understand your question??????
Click to expand...
Click to collapse
I was trying to import phone book from ATT Tilt to Honda Accord Hands free link (that is built in Bluetooth that comes with car).
I just tried this software & it says the same error "The phonebook can't be sync. Pls. check the device"
abhiku said:
I was trying to import phone book from ATT Tilt to Honda Accord Hands free link (that is built in Bluetooth that comes with car).
I just tried this software & it says the same error "The phonebook can't be sync. Pls. check the device"
Click to expand...
Click to collapse
Did you send your contacts via the software on your device? If so, I'm outta ideas, sorry couldn't help more...
MorKaiser said:
Did you send your contacts via the software on your device? If so, I'm outta ideas, sorry couldn't help more...
Click to expand...
Click to collapse
Yes, I did. Initiate send from the software on phone & I got this error.
“Unable to transfer Contacts. Make sure that the Bluetooth device is set to receive contacts”.
abhiku said:
Yes, I did. Initiate send from the software on phone & I got this error.
“Unable to transfer Contacts. Make sure that the Bluetooth device is set to receive contacts”.
Click to expand...
Click to collapse
I have a Pioneer AvidD3 so I'm not sure exactly how hoda's system works... but with my system, i had to make sure it was in "phonebook transfer mode" before I could send my contcts; otherwise I got the same error.
hope this helps!
Success
I was able to import my entire Tilt phonebook into the Navi system on my MDX. From there, I can transfer any entry to the Handsfree link or just place the call from the Navi system.
rlwva said:
I was able to import my entire Tilt phonebook into the Navi system on my MDX. From there, I can transfer any entry to the Handsfree link or just place the call from the Navi system.
Click to expand...
Click to collapse
Are your entries on your sim card (just the phone number) or in the main phonebook memory (can you see the whole contact info including address and multiple phone numbers)? The reason I ask is the impression I had is the contacts sent over could only be the simple kind with just the name and 1 number.
I hope you have the numbers in main phonebook memory as I would love to get this working in my TL.
Also, did you use the jetware software? If so, would you mind letting us know in detail what you did as I'm still unsucessful.
Doesn't SAPsettings do this? I have it on my vario III and the phonebook downloads to my car (VW bluetooth kit) OK.
jontelfer said:
Doesn't SAPsettings do this? I have it on my vario III and the phonebook downloads to my car (VW bluetooth kit) OK.
Click to expand...
Click to collapse
SAP settings would only enable you to access phonebook enterys that are on the sim card. I want to be able to get the actual outlook contacts. Just wondering if that is possible.
Oh, well I have no contacts on my SIM and my car display shows all my outlook contacts. Maybe it's accessing them through a different route. It just worked out of the box for me.
I have a Verizon XV6800 and a Acura TL and I have been trying to figure this out also. I have tried using the Jetware program but didnt get any where with it.
Please, if you figure this out PM me or shot me a email at [email protected] and let me know how you did it.
Thanks
Bud
abhiku said:
How to enable Phone Book Access Profile (PBAP) on ATT Tilt?
I need to transfer phone book to accord bluetooth & it need to enable PBAP on phone.
Thanks in advance & helping out..
Click to expand...
Click to collapse
Hi
Did you use the jetware program? Did you some how set the nav on your MDX in some kind of "phonebook transfer mode"? If so what did you do on the Acura Nav to do this?
Thanks
Bud
jontelfer said:
Oh, well I have no contacts on my SIM and my car display shows all my outlook contacts. Maybe it's accessing them through a different route. It just worked out of the box for me.
Click to expand...
Click to collapse
I tried again today both with and without the Jetware bluetooth extension. Tried multiple settings... no luck. Everytime I press phonebook import, it says the currently linked phone does not support this function. Any one with any suggestions?
(I have the AT&T Tilt and a 2007 Acura TL with Nav)
Do you have SAPSettings in settings->system?
If not, maybe find a cab for it and give it a go. Sounds like you've hit a brick wall anyway.
Aside from that maybe it's a difference at the car end. Mine is a SEAT (don't think they're sold in the US but think VW) and works out of the box.
Jon
help me out
rlwva said:
I was able to import my entire Tilt phonebook into the Navi system on my MDX. From there, I can transfer any entry to the Handsfree link or just place the call from the Navi system.
Click to expand...
Click to collapse
I have acura TL nav. I was unable to import phonebook from my sprint touch to TL.
can you tell me how you did on MDX?
thanks
nianmo
MorKaiser said:
I have a Pioneer AvidD3 so I'm not sure exactly how hoda's system works... but with my system, i had to make sure it was in "phonebook transfer mode" before I could send my contcts; otherwise I got the same error.
hope this helps!
Click to expand...
Click to collapse
I have a Pioneer deck as well and I have been looking for a way to do this. I didn't think it was possible. Should have known better! Going to try it out later tonight!
Is their any possiblity to get voip programs working on diamond?
I have no use for voip, so I haven't tried it, but take a look at "Fring."
http://www.fring.com/download/
Beyond fring’s social appeal, it also saves money letting you make affordable local and international calls to landline and regular cellular numbers using your SkypeOut/SkypeIn account or almost any internet voice service (SIP) such as SIPNET, EuteliaVoIP, VoIPVoIP and VoIPTalk, even from non-SIP enabled handsets.
Click to expand...
Click to collapse
I'm using skype, dutty uploaded a working version somewhere on this forum.
Sry i cannot give you the direct link
A listing and discussion of VOIP clients for Android.
Full VOIP (packet-based from G1 to other party)
Partial VOIP (voice minutes to server, packet-based from server to other party)
iSkoot
Skype Lite
truphone
See first post
skype on the market...
Just saw that skype is on the market. Old news ? Not sure if you saw that....
THANKS!
PAO1908 said:
Just saw that skype is on the market. Old news ? Not sure if you saw that....
Click to expand...
Click to collapse
Thanks for the notice. Been waiting for a version other than iSkoot.
Be carefull. I just installed it and from what I understood you have to pay even when someone calls YOU !
In short, this "Skype Lite" connects to skype servers via your minutes, not voip. Nuff said.
Update:
Truphone has been ported to Android.
http://www.cyrket.com/package/com.truphone.android
Where's the package to be found? Doesn't seem to actually be on the market despite it showing at cryket. Is this location restricted?
Truphone does NOT work in packet mode. Here is the response I got from Truphone support:
"Unfortunately, Truphone on the Google Android is designed to work only with
Truphone Anywhere. It is not possible to make free calls over WiFi on that
handset. We apologise for the inconvenience caused.
If you have any further queries please reply to this email for assistance.
Regards,
Ludovic
The Truphone Support Team"
What would be neat is if someone could write an extension of some sort to the dialer that allows calling over SIP. All you would have to do is input your carrier information, set preferences on how you want calls sent/received through the VoIP connection and the phone itself would handle the rest.
psv619 said:
Truphone does NOT work in packet mode. Here is the response I got from Truphone support:
"Unfortunately, Truphone on the Google Android is designed to work only with
Truphone Anywhere. It is not possible to make free calls over WiFi on that
handset. We apologise for the inconvenience caused.
If you have any further queries please reply to this email for assistance.
Regards,
Ludovic
The Truphone Support Team"
Click to expand...
Click to collapse
Argh crap. Upon further investigation you're correct. Should have done my due diligence =(
I'll move it down to the partial-voip section and continue waiting for a full solution =)
You should also add Voxofon to the partial VOIP list. I tried it and it has to dial a US number before connecting you to your deisred number.
-Gus
looking 4 a G1 VoIP solution (any experiences?)
Hi there,
greetings to all - 1st post here ;-)
I live in Chile and have an unlimited 3G data chip for which I can also get the most basic 10$ voice plan. We do have really good 3G coverage here!
I do make quite some calls abroad, thus I was looking into VoIP solutions for the G1.
Is anybody using their G1 as VoIP-device? ... what voip clients are you using? IScoot? ... what "carrier" do you use?
thx for sharing your thoughts.
al
Sip or IAX VOIP Client for Android G1?
Does anyone know of a working SIP or IAX VOIP client that is working on Android G1?
TIA
topkat0
can anyone still see this on the market- i can't see it- please don't tell me they have made it available to US customers only! With my provider i get 4000 free skype minutes as part of my data plan so wanna see if they work thru the G1 (of course they don't support the G1 so who knows.....
Anyone got an apk for skype lite for android?
MontAlbert said:
can anyone still see this on the market- i can't see it- please don't tell me they have made it available to US customers only! With my provider i get 4000 free skype minutes as part of my data plan so wanna see if they work thru the G1 (of course they don't support the G1 so who knows.....
Anyone got an apk for skype lite for android?
Click to expand...
Click to collapse
I searched for "Skype" and "Lite version of Skype beta" came up. Is that what your looking for?
There is also an app called "iSkoot for Skype".
Here is the description.
"iSkoot for Skype delivers the features of Skype to your mobile phone. View your contacts, IM, make & receive Skype calls and place SkypeOut calls to phone numbers worldwide. iSkoot routes calls via the voice channel to offer unsurpassed call quality"
Sorry.... I don't subscribe to Skype so for me... it's not really worth downloading or really looking into but I hope that this points you in the right direction and is some help.
yeah i can see them on cryket but not on my market- did a search and finally found an apk for skype lite- will try it out tomorrow.
I saw the iskoot thread on here saying it wasn't available to those not in USA so maybe skype is the same.... either way, i now have it
Funny thing is i have the app APK Installer but being an adventurous person i had a crack at using the adb to install it- took me a while- for some reason i had to do adb remount and after that it worked perfectly!
Nothing available yet, just some "lite" versions that use your minutes.
Voxofon Call Router, is that also partial voip or is it the full thing ?
POTZY69 said:
Voxofon Call Router, is that also partial voip or is it the full thing ?
Click to expand...
Click to collapse
Partial only