Hi,
I have noticed that the phone will blink and wait for about 1 sec before it starts to ring/vibrate, is there a registry entry to minimize this lag time? I would like the phone to ring and blink at the same time
they always have.
plenty of posts on here if you use the search button.
I found the "solution" to this bug using the search.
Works OK but there is a slight instability for the first 0.5 seconds of the ring - it does start immediately which fixes the 3 second lag.
Regards, D.
Related
WTF did I do?
I've had this thing for 7 months without this type of problem. I had to hard reset a few weeks ago because the thing was getting too buggy with all the software I had added and removed.
I use SPB Time mostly for alarms. It had been working flawlessly. Now when I put the Tilt into standby mode, it seems to go into some sort of deep sleep in which the clock stops moving until I press the power button again. When I do that, the clock briefly flashes the previous time before updating to the current time but it misses the alarm that I had set.
I've looked at Kaiser Tweak but that doesn't seem to fix this issue.
In Kaiser Tweak, did you adjust the 2 options under "Notifications" to both be 60 seconds? The default is 1 second and that makes it malfunction just as you've described, 60 seconds fixes it. They aren't intuitively named, that's why I ask the seemingly inane question.
I have had my Diamond for about 5 days now. The other day I noticed it will get stuck in a constant weak vibrate. It seems that a vibe event will cause it to start, like the phone doesn't know to stop vibrating.
I call it weak, because while it is doing this, I can go to volume settings, select Vibrate and the much stronger vibrate even occurs. It seems if I shake the phone or move it around a bit the weak vibrating will stop.
Also shaking the phone sometimes causes this weak vibrating to begin.
Sounds like a mechanical issue ? I have installed some apps like GSen & SensorLock. A couple others like Advanced Config and done some of the registry tweaks.
Any suggestions would be greatly appreciated.
Thanks in advance.
mackerman said:
I have had my Diamond for about 5 days now. The other day I noticed it will get stuck in a constant weak vibrate. It seems that a vibe event will cause it to start, like the phone doesn't know to stop vibrating.
I call it weak, because while it is doing this, I can go to volume settings, select Vibrate and the much stronger vibrate even occurs. It seems if I shake the phone or move it around a bit the weak vibrating will stop.
Also shaking the phone sometimes causes this weak vibrating to begin.
Sounds like a mechanical issue ? I have installed some apps like GSen & SensorLock. A couple others like Advanced Config and done some of the registry tweaks.
Any suggestions would be greatly appreciated.
Thanks in advance.
Click to expand...
Click to collapse
Un install sensor lock and test. i had this issue with an old version ofthat application.
I have uninstalled both GSen (Since it wouldn't rotate SMS for me on Sprint Diamond) and Sensor Lock. The device is still doing this strange vibrate.
I noticed even when I hold the power button and turn it off (soft reboot?) it continues the odd vibrate. The vibrate will however stop when I remove the battery.
Just giving an update. The phone has stopped doing this strange vibrate action. Not sure if it was related to the program un-installation or not. As stated above it continued to do the vibrating action after the program was uninstalled, but definitely less frequently.
I had something very similar the other day. I'm using the swift ROM.
Its never happened before, and i've been using this same rom a for a while now.
ya i have the sprint diamond and mine did that the one time when i took it off the charger. it would vibrate pulses and the phone was like frozen. So i plugged it back in the charger and uninstalled sensorlock and its fine now
mackerman said:
I have uninstalled both GSen (Since it wouldn't rotate SMS for me on Sprint Diamond) and Sensor Lock. The device is still doing this strange vibrate.
I noticed even when I hold the power button and turn it off (soft reboot?) it continues the odd vibrate. The vibrate will however stop when I remove the battery.
Click to expand...
Click to collapse
Somewhat off topic but did you find anything that rotates in SMS on the Sprint Diamond?
Don't blame it on Sensor Lock. I don't have that program installed & mine started vibrating non stop the other day. I couldn't get it to stop & finally did a hard reset. It still continued to vibrate all the way to the point where it got to the green Windows Mobile screen. It stopped, after that & it hasn't happened again since (this was on Saturday). I had done some of the reg tweaks for TF3D performance & nothing else.
sensor lock was the only program i had installed so it was the reason for me. as far as i know only way to rotate SMS with sprint diamond is the long press key
I have also done some of the reg key tweaks on my diamond. It did happen again last night, but before that it's been a few days. I had GSen installed, and it wasn't rotating on SMS, I think I read it wouldn't work with the Sprint Diamond.
What is the long key press method?
Does anyone know how to stop the device returning to the Touchflo 3D home screen every time I wake the device up? I have a Touch Pro but no-one seems to know the answer to this in the forum and I guess it's a TF3D issue.
I can't find anything about this on a search, but I'm sure I remember reading about it in the Diamond forum.
It's annoying when it goes off when I'm writing a text message or in a call or listening to music and I have to navigate all the way back.
Same Problem
yes... i have the exact same problem.
To add to it, I've set autolock also. When I'm trying to watch a vedio on you tube, and if it's taking some time to buffer, the phone locks. And upon unlocking, i'll find myself in the home screen... and have to navigate back to youtube menu all again.
Very uncomfortable behaviour, especially when you are trying to show off the features on your phone to friends...
Is this solved in any new ROMs... or is there a tweak for setting this right?
I like the autolock thing - it's great. However when I'm writing a message or something it is so annoying.
Also, because the screen on the Touch Pro goes off in calls, it always goes back to the home screen so you can't see the call status, can't add notes and can't read contacts as easily. More annoyingly, my line of work involves phone systems that require entering numbers a lot so I always need to see the phone keypad. Very annoying.
did you guys every get this sorted. Just got my diamond 2 and I have the same annoying problem
Hi everyone,
some days ago, I've got a new display into my phone. It is working fine and everything is running good except two things:
- The phone app does hang during an outgoing call. I cannot hang up the call, because there is a black screen, or the phone does not accept input either. When the screen keeps black, I can go back to the home screen pressing the middle button. But in the "system tray" there is no phone symbol. The behavior is changing from call to call. Sometimes the process crashes.
- When the phone is not used for some seconds or minutes it takes up to ten seconds to see someting after pressing the middle button. An interesting aspect is that when the mp3 player is running, there is no delay. Whenn I press the middle button the screen comes back immedialtely.
I have the Firmware 2.2.1 running and executed a hardware reset two times.
Has someone an idea what I can do to bring the phone app to work properly and to decrease the delay when I want to get the from out of the "sleeping mode".
Please excuse my bad english, I hope you got me right
What do you mean by a new Display...I assume you mean a new ROM or kernel and not actually replacing the screen.
Are you using any sort of app that controls or underclocks the CPU such as SetCPU? I used that app for a while to underclock the CPU while the screen was off and it caused the sort of hanging when answering calls that you described.
Also if this is a new kernel confirm that is is not underclocking or using UV to lower the voltage.
Thank you for your reply.
I replaced the display for hardware damage reason. No new kernel or something like that.
I've done 2 hardware resets. So I just have some standard apps on my phone.
Is there some app wich dispays the voltage and frequency of the cpu?
Ok guys, the problem is "solved".
I thought, that I would have to live with my delay und phone problems forever
But this weekend, my phone decided to workl properly as before. There is no delay when bringing back the screen from sleep and no process hanging up anymore. I did not invest more energy to solve that problem.
I dont know what happened internally, but I am extremly happy now
I'm having quite a few issues with my ROM'd Z phone using Paranoid. I've recently updated to the latest version as soon as I was alerted.
1. The lock screen freezes, or rather becomes limited in responsiveness. I use the swipe up to unlock. When I swipe up, the clock/notifications just bounces and eventually the screen goes dark, then off. Sometimes I can reset using the power menu, but often the screen is totally unresponsive so I have to do a hard reset. On occasion I have to reset multiple times consecutively because it locks up immediately after boot... until its finally usable again. https://drive.google.com/open?id=0B7OGcalUJSgHblZob2Q2eHNkLU0
2. The phone gets hot in my pocket. When I notice this, often it has unlocked, turned on GPS, turned on the LED, taken photos and opened apps, or a combination of things. Sometimes even made a phone call, either to a contact or a recent from the log.
3. Recently I noticed it randomly ghost selecting right in front of me. I was unable to unlock and had to hard reset the phone.https://drive.google.com/open?id=0B7OGcalUJSgHVmJhQ0FOUDdLQkE
4. I am not getting SMS alerts from Optus 321 telling me I have messages from when the phone was off, or out of service range. Often I won't know till I randomly check days later, or when I miss a call (while on another call or in service range) and they leave a message.
5. Sound drops in and out from the other party. They can always hear me. Randomly, on some calls. I can have 3 good conversations, then the next I have to call back multiple times before I get enough up time.
5a. When I'm making a call, I may not even hear the outgoing ringing tone.
6. On any new call, the the volume on my Bluetooth headset is usually down about half way. I click the Vol+ and it immediately jumps to full, the volume bar already being at full.
7. When it rings, it often takes a second or more (after the ring tone has started) for the screen to turn on.
On suggestion by a friend, I disabled a lot of notifications, but the lock screen still won't unlock even when the only thing showing is the clock.
I guess there is problems with the the phone hardware, the ROM or incompatibilities with it and an APP.
Is there some diagnostics, or an app that I can run that will log what is going on and I can have someone look at those logs for me?
You should ask in Paranoid Support Thread
http://forum.xda-developers.com/xperia-zl/orig-development/rom-paranoid-android-5-t2992023
Thankyou. I could not find it.
edit: That thread is closed. There is a link at the end for a 'new home', but that thread is under Xperia ZL. Is the ZL considered the same phone?
I'm really sorry.
i gave you a wrong link. Shame on me.
http://forum.xda-developers.com/xperia-z/orig-development/rom-paranoid-android-5-t2976930
This is for yuga/c6603/"Xperia Z"