Related
I've been using my AT&T Tilt for nearly a month without any problems, but yesterday for reasons I cannot determine, my phone suddenly stopped being recognized by any version of Windows XP or Windows Vista. I tired Windows XP SP2 in a virtual machine on my Mac, I tried it on my wife's Windows Vista machine, and I tried it on my children's Windows Vista machine and I received the same error each and every time.
No matter what machine I plugged it into, I would immediately get a "USB Device Not Recognized" error and neither ActiveSync on Windows XP nor WMDC on Windows Vista would initiate a sync.
I've hard reset my phone multiple times, I've uninstalled and reinstalled both ActiveSync and WMDC, I've even flashed to a different OS on my phone (using my MicroSD card) and nothing has worked.
I'm beginning to wonder if maybe the USB connection on the phone may have failed. I've been contemplating sending it back to AT&T since I had a malfunctioning pixel in the middle of the screen, but with the recent problems I'm starting to lean more towards returning it and less towards living with the pixel issue.
Anyone have any ideas on what might be causing the USB problem?
Just a quick update, when I arrived at work today, I attempted to sync with my work computer (Windows Vista Business) and I had no trouble at all. I'm going to take home the cable that I have here (which came with the BlackBerry I use for work) and see if that makes any difference with my home computers.
wow
I can confirm this as well. I have the Tilt and I used a blackberry cable from my job and it synced up flawlessly. before i was getting that usb not recognized as well.
I'm having the exact same problem now.. it worked fine for 4 months and now.. it just says usb not recognized. Please post the results if your blackberry cable. thanks
I just tried a brand new usb cable and it still didn't work for me
I have the same problem but i've got a solution for this and it's very simple.
For someother reason ActiveSync will boot on the background of your device even when you close it, it will boot up within 10 min or less.
This is the thing you need to do:
Before you plugin your usb cable to sync......
Run taskmanager and close activesync. When you are sure that this application is not running then plugin your USB cable.
It worked for me!
sstolk said:
I have the same problem but i've got a solution for this and it's very simple.
For someother reason ActiveSync will boot on the background of your device even when you close it, it will boot up within 10 min or less.
This is the thing you need to do:
Before you plugin your usb cable to sync......
Run taskmanager and close activesync. When you are sure that this application is not running then plugin your USB cable.
It worked for me!
Click to expand...
Click to collapse
I've tried that, didn't work
I had this exact same problem happen to me at the end of November - I was using WMDC 6.1 for months then all of a sudden I could not connect (same error message you described). I went back and looked through the MS Windows updates and identified a NVIDEA driver update had caused my problem. Used system restore to roll it back and then everything worked fine.
ellergek said:
I had this exact same problem happen to me at the end of November - I was using WMDC 6.1 for months then all of a sudden I could not connect (same error message you described). I went back and looked through the MS Windows updates and identified a NVIDEA driver update had caused my problem. Used system restore to roll it back and then everything worked fine.
Click to expand...
Click to collapse
How do I look back at the MS Windows updates? and this will automatically tell you whats wrong?
DVS_WiNdz said:
How do I look back at the MS Windows updates? and this will automatically tell you whats wrong?
Click to expand...
Click to collapse
ya..i bought my girlfriend the HTC Touchdual and has the same problem as well. She can't seem to sync with her Win XP and is only her 2nd time trying to sync and it failed already. In between, I don't think there was any internet connection to update anything.
Please help!
(Sorry to borrow this thread to solve the same problem but on another device btw, I own a Kaiser myself but currently didn't face any problem yet..touch wood!!)
Dwimmerlaik, did you have any luck fixing the problem?
Solved my USB Connection issue in Vista
After trying everything I could find on the net to solve my inability for Vista to stay connected with my HTC Kaiser (ATT TILT), I found the problem exists with the MicroSD card. No matter what, Vista would connect then disconnect my phone after a few seconds. After weeks of searching I finally just decided to take out my 2Gb MicroSD card.....and now Vista maintain connections and I am finally able to sync via WMDC.
Spread the Word!!!! Take out the MicroSD.
jbenado said:
After trying everything I could find on the net to solve my inability for Vista to stay connected with my HTC Kaiser (ATT TILT), I found the problem exists with the MicroSD card. No matter what, Vista would connect then disconnect my phone after a few seconds. After weeks of searching I finally just decided to take out my 2Gb MicroSD card.....and now Vista maintain connections and I am finally able to sync via WMDC.
Spread the Word!!!! Take out the MicroSD.
Click to expand...
Click to collapse
too bad I'm not using Vista..
Anyone else have this problem and solved it?
-Try to use the USBs at the back of your PC(not on the front of the case).
-Try to buy another cable(That SHOULD BE an USB2.0 HighSpeed certified shielded cable. That costs something about $6 ).
nsa666 said:
-Try to use the USBs at the back of your PC(not on the front of the case).
-Try to buy another cable(That SHOULD BE an USB2.0 HighSpeed certified shielded cable. That costs something about $6 ).
Click to expand...
Click to collapse
I've tried the back USB ports.. don't work.. and I've tried numerous USB2.0 cables.. it just keeps saying USB device not recognized.
i tried uninstalling the activesync..
then. install it again..
voila, my wizard got connected..
by the way, im using the blackdiamond rom
layzien0n0n said:
i tried uninstalling the activesync..
then. install it again..
voila, my wizard got connected..
by the way, im using the blackdiamond rom
Click to expand...
Click to collapse
Didn't work for me either
I've tried doing that multiple times..
Go to phone, menu, options, time zones tab, uncheck the Auto change time zone & clock.
This is a known bug in the firmware that causes A/S to automatically start & then sometimes it tries to start a second sessions of A/S when you plug in to your PC. Give it a try, have you ever noticed that A/S is running in task manager even though you're not connected or just reset? Just one thought.
GSLEON3 said:
Go to phone, menu, options, time zones tab, uncheck the Auto change time zone & clock.
This is a known bug in the firmware that causes A/S to automatically start & then sometimes it tries to start a second sessions of A/S when you plug in to your PC. Give it a try, have you ever noticed that A/S is running in task manager even though you're not connected or just reset? Just one thought.
Click to expand...
Click to collapse
Just tried it.. didn't work..
Happy New year to everybody...
Mine has started off bad, I just returned from my X-mas/New year break and I can no longer sync, install or uninstall programs ?
when I connect my PDA to the PC it sees it, but it can't sync, if I go to remove/add programs it shows empty nothing installed.
I can even brows the PDA but I can't copy files to or from it?
I'm lost, can anyone help me out on this I really don't want to do a hard reset.
Thanks.
Anyone.........?
tryed to reinstall active-sync?
did you installed some program has to do with network (kind of ftp-server or something else that uses some ports in you network-config)
i had the problem with filezilla ftp-server, using port 990 for ssl-authentification.
the problem was, active-sync also uses this port, but filezilla starting as service was bound to this, so AS could not work.
edi said:
tryed to reinstall active-sync?
did you installed some program has to do with network (kind of ftp-server or something else that uses some ports in you network-config)
i had the problem with filezilla ftp-server, using port 990 for ssl-authentification.
the problem was, active-sync also uses this port, but filezilla starting as service was bound to this, so AS could not work.
Click to expand...
Click to collapse
Hi Edi, No I haven't installed anything, but I think my problem might be something else (worse), I just realised that I can no longer copy move or delete files from either the PDA or the MC, I get an "access is denied" error.
Anyone have any idea what might have caused this? and better still, is there a fix.
I seem to be repeating myself lately with this answer, so I apologise if it seems down-right obvious, but have you ensured you have the latest version of ActiveSync/Windows Mobile Device Centre?
The reason I ask this is because I too was experiencing Sync problems using WMDV, but realised I didn't have the latest version (it doesn't automatically update with Windows Update, WTF?). Windows Mobile 6 is obviously programmed slightly different from revious versions, so updating Sync software is a simple step that's often missed...
Audio said:
I seem to be repeating myself lately with this answer, so I apologise if it seems down-right obvious, but have you ensured you have the latest version of ActiveSync/Windows Mobile Device Centre?
The reason I ask this is because I too was experiencing Sync problems using WMDV, but realised I didn't have the latest version (it doesn't automatically update with Windows Update, WTF?). Windows Mobile 6 is obviously programmed slightly different from revious versions, so updating Sync software is a simple step that's often missed...
Click to expand...
Click to collapse
Hi Audio,
Thanks for the reply, but I do have the latest version and I never had a problem with it until this week.
Just so i can try and help, what is it you are using Dave? AS or WMDV?
Audio said:
Just so i can try and help, what is it you are using Dave? AS or WMDV?
Click to expand...
Click to collapse
Hi Audio, I use both, AS at work and WMDV at home, both used to work fine.
And do you experience the issue on both?
EDIT: Apparently, there may be a problem with ActiveSync 4.5. Just take a look at this list of complaints about it lol.
One user stated:
"I was using AS4.2 with my ETen M700, everything was fine. I wanted to upgrade to WM6 and teh instructions said I needed to use AS4.5 I installed it and tried to connect my device - disaster! The rapimgr.exe process runs at 99% and slows the computer to a crawl.
After 3 attempts, I uninstalled it, and re-installed AS4.2 (available from www.microsoft.com) and now things are working again. "
This may be worth doing to see if this soilves your problem...
Audio said:
And do you experience the issue on both?
Click to expand...
Click to collapse
Yes I have tried it on three different machines, I can see the PDA but it won't sync or let me move or copy files.
It look like I might have to do a hard reset, but I'm hoping not
Also, a chap on a premium (you have to pay for support!) site said the following, which seems slightly similar:
"I've been using ActiveSync for a while now to sync outlook up to my motorola q. For some strange reason it's stopped working. The connection takes place, you get the little signal saying that ActiveSync picks up on it, the "Connecting" message, followed by the "Synchronizing" message... and nothing. It just hangs there. I've reinstalled ActiveSync and Outlook and did a hard reset on the phone. I'm convinced the issue is with the desktop, if I take the same PDA home, I'm able to sync up with my PC there. Does anyone know what happens during the Synchronizing phase and what could be possibly causing it to hang? ActiveSync 4.5 is a new beast, solutions to the older versions don't seem to apply.
If I hit the Stop button, ActiveSync hangs on the "Stopping" message and ActiveSync on the phone becomes unresponsive until I unplug the cable."
So even a Hard reset didn't solve this guys problems...
I would recommend uninstalling AS 4.5 from your machine, and installing 4.2. Reason being, i believe you need your phone connected to the computer when you install syncing software, so it more than likely "fiddles" with some very well hidden settings on the device. If this is the case, 4.5 may have [email protected] it up, but 4.2 may be your savior.
If you decide to give it a go, let us know how it goes...
Audio said:
Also, a chap on a premium (you have to pay for support!) site said the following, which seems slightly similar:
"I've been using ActiveSync for a while now to sync outlook up to my motorola q. For some strange reason it's stopped working. The connection takes place, you get the little signal saying that ActiveSync picks up on it, the "Connecting" message, followed by the "Synchronizing" message... and nothing. It just hangs there. I've reinstalled ActiveSync and Outlook and did a hard reset on the phone. I'm convinced the issue is with the desktop, if I take the same PDA home, I'm able to sync up with my PC there. Does anyone know what happens during the Synchronizing phase and what could be possibly causing it to hang? ActiveSync 4.5 is a new beast, solutions to the older versions don't seem to apply.
If I hit the Stop button, ActiveSync hangs on the "Stopping" message and ActiveSync on the phone becomes unresponsive until I unplug the cable."
So even a Hard reset didn't solve this guys problems...
I would recommend uninstalling AS 4.5 from your machine, and installing 4.2. Reason being, i believe you need your phone connected to the computer when you install syncing software, so it more than likely "fiddles" with some very well hidden settings on the device. If this is the case, 4.5 may have [email protected] it up, but 4.2 may be your savior.
If you decide to give it a go, let us know how it goes...
Click to expand...
Click to collapse
Hi Audio, I don't know what to do, I started another thread about no longer being able to either copy, move, delete, install or uninstall anything, I really don't think it's a sync problem anymore. I will wait another day or so and then I'm going clear storage and start again.
what really pisses me off is my wife has no problems at all? perhaps my PDA is ******.
Exactly the same has just happened to me - I tried to connect to ActiveSync this morning to copy a file across via bluetooth, but it refused to connect. I plugged in the USB cable, nothing - the phone charges but ActiveSync does not want to know.
I deleted the device in AS, tried to add a new one - nothing found.
I last sync'd up fine 4 days ago.
I am using Dutty's DualTouch v1.1 release.
I am using AS 4.5.0 build 5096
If I discover services via BT from the kaiser to the computer it finds the ActiveSync service.
I have done a soft reset, no difference, restarted the PC, same. I haven't applied any Windows Updates or made any changes since it stopped working.
I might try rolling back to AS 4.2
Edit: Same with AS4.2
Think it might be clear storage time
Cleared storage and then it worked fine...will take the opportunity to upgrade to dualtouch v2
Hi Blaze, damn it's annoying isn't it, my next move is clear storage as well.
Hope mine works again.
It's bloody happened again I reflashed the rom with Duty's Dual Touch V2. Much better rom, but activesync has just given up again via BT and usb. Maybe it's some inherent problem with WM, or with Duty's roms - which are you using Dave?
I've tried it on a fresh build of XP Pro on an old machine with nothing than AS & Outlook 2k3 on - same, AS sees the device, but wont sink. Problem seems with the device...
Dave... said:
perhaps my PDA is ******.
Click to expand...
Click to collapse
Sorry I cant help other than to say my dutty rom is working fine on WMDC.
But I had to post and ask why you asterisked out the "ed" and left the lrest of the word in?
Brilliant! Lmao! :d:d:d
unwired4 said:
Sorry I cant help other than to say my dutty rom is working fine on WMDC.
But I had to post and ask why you asterisked out the "ed" and left the lrest of the word in?
Click to expand...
Click to collapse
Good Point I didn't even notice, put it down to stress...
PS: For anyone who's interested, I ended up doing a hard reset, reinstalled my apps, restored my backups and it's working fine now.
Did you have F-secure Mobile installed? If not, I could take that away from possibilities that's causing this problem
Hi all!
This seems to be an issue shared among a big group of diamond owners. But unfortunately no solution out there. So as a last attempt, I create this thread in hope of a solution.
The problem:
Its seems that for no reason at all, the sound all together stops working on the Diamond after it has been in standby mode for a while. if I get a call, I can not hear the other person, and if I call back the same thing. No ring signal sounds either when I get a call, just flashing button. I noticed however that if I started to play a music file, after 5 seconds into the playing the sound would come back again.
Is there a solution to this problem? I have found other posts about this problem but no solution!
**********UPDATED 2008-12-20******************
PROBLEM SOLVED!
Update to Radio_1.09.25.23
TESTED AND CONFIRMED FIX
********************************************
same problem here, still searching the forums for a solution
I already changed ROM, Radio and the problem persists
One thing i noticed is after the sound is back again the phone lost his signal (like when you turn off and then on again the phone setting)
For a moment i thought it was the g sensor cause the sound come back suddenly when i move the phone.....happened a couple of times.
Ill keep searching for a solution by my own or in the internet
-------
after searching for a while only dead ends
http://forum.xda-developers.com/showthread.php?t=423443
http://forum.xda-developers.com/showthread.php?t=431826
http://forum.xda-developers.com/showthread.php?t=412468
http://forum.xda-developers.com/showthread.php?t=454173
http://forum.xda-developers.com/showthread.php?t=435733
http://www.mydigitallife.info/2008/...to-notify-when-receiving-sms-in-standby-mode/ (not the exact issue)
https://forums.microsoft.com/WindowsMobile/ShowPost.aspx?PostID=4182690&SiteID=65 (kind of related)
http://www.htcwiki.com/thread/1883907/Sound+stops+working?offset=0&t=anon (apparently happens in the touch pro too)
I had this problem with swiftbl 6.0, but It dissappeared with 6.5, is a problem of the roms. Try another!
Thanks for your suggestion but I had already done that a couple of times, also I had changed SPL versions, Radio and tried to find a combination of these with the ROMs that hopefully dont get me this error/issue. Still looking for a solution
Another thing I did: I tested with different SIM cards, from different providers, but didnt work
mjckt said:
... had already done that a couple of times, also I had changed SPL versions, Radio and tried to find a combination of these with the ROMs that hopefully dont get me this error/issue. ...
Click to expand...
Click to collapse
Also did I - without success.
I don't even have a clue what causes the failure. Sometimes my Diamond works the whole day, somtimes only a couple of minutes.
Tried a lot of combinations with the settings - means: BT on/off, WiFi on/off, and so on - nothings helped
My warranty is likelihood lapsed, cause of playing with HardSPL and different ROMs. So replacing the mobile isn't possible any more (I guess).
My Diamond worked in the beginning perfectly, until ... hmmm good question, it must have been an update or somthing like that, which causes the malfunction.
@mjckt: Did you have the problem from the first day on?
Windows Mobile 6.1 Pro - CE OS 5.2.19965 (Build 19965.1.2.3)
ROM 1.93.407.1 GER (ROM-Date: 07/10/08)
Phone 1.08.25.08
Hi,
my diamond had the same problem. You must send your diamond to repair. My device had a hardware failure and your, too.
DT
I tried to update the radio to several different versions, but the problem is still there. I can not use my warranty either because the phone has been unlocked etc. But I still doubt that the problem is hardware related, since the phone worked just fine for a short while before the problems came.
Has anyone tried with new sound drivers? If so where did you get the drivers and how did it work?
I am going to try some new sound drivers, will post the results soon
SoundDriver_and_settings from_Raphael_1.94 (do a search for finding file to download*)
please confirm that
...So I ask everyone with this problem to verify or add any factor ...
Click to expand...
Click to collapse
good idea
2. (Confirmed = YES) The problem occurs when phone is/has been in standby mode
Click to expand...
Click to collapse
definitely yes. Almost every morning (after being in standby the whole night) I got no sound on my Diamond.
3. (Confirmed = NO) The problem came around first after installation of Skype or other VoIP software.
Click to expand...
Click to collapse
No, never installed any VoIP-Software.
4. (Confirmed = NO) The problem only occurs if the battery level is lower than 50%
Click to expand...
Click to collapse
For sure: no. I am reaching very rearly a battery level below 50% but have very often the problem (even with a fully charged battery)
I tried to roll anything back to original state (german O2) and did not install any other software - the problem still persists. So I guess, it has nothing to do with any additionally installed software.
Can anyone confirm this?
"The problem did not existed when you bought your diamond - The problem arose after you updated something (e.g. new ROM from vendor)"
Olaf
yes i have same problem...
and when i try open sound option and try change music files in the notification system says "this file is brocken or damaged...bla bla" it is joke? I only use systems music files
My opinions:
Systems stops read flash...
Systems music drivers stops...
System losts particions of the flash...
question:
Do you have Nokia Music files AAC or MP3?
Do you have file dialog extencions?
Do you have g-alarm program?
What programs instaled to yours diamond, make list...?
This bug desapear after soft reset, but touday i have has this
just had it happen to me last night. had to hard reset i hope it's not a sign of a future hardware failure
update Radio_1.09.25.23 ,the problem will be done
update Radio_1.09.25.23 ,the problem will be done
coollvshuai said:
update Radio_1.09.25.23 ,the problem will be done
Click to expand...
Click to collapse
+1
As I already wrote earlier (see HERE) ... TRY IT !!!
mjckt said:
One thing i noticed is after the sound is back again the phone lost his signal (like when you turn off and then on again the phone setting)
Click to expand...
Click to collapse
the same problem here.
no solution found yet.
please post any solution found by you!
coollvshuai said:
update Radio_1.09.25.23 ,the problem will be done
Click to expand...
Click to collapse
yeah!
i have tested this and the problem seems to be solved!!
i will test this the next days and will report here.
thanks!
Solved for me with T-mobile new ROM
Hi,
I used to have the same problems, mainly after using my BT headphones, and after installing the new T-Mobile ROM all my troubles are far away .
coollvshuai said:
update Radio_1.09.25.23 ,the problem will be done
Click to expand...
Click to collapse
Had not tried this version before. Have just updated to this radio version. Will confirm in a few days if it works.
hi
hi i hope someone can help me even if it is solved.
i downloaded the radio update 1.09.25.23 but i can't seem to update it everytime i try i get an error why is that?
i starts processing but the bar stays 0%.
after a while i have to disconnect from the usb and take my battery out.
i hope someone can help me because is don't know anymore.
Hi, i have the same porblem.. no sound in phone, when i try to type phone numbers, the music plays but no sound (if i connect the headset i can hear the music), i installed the radio 1.09.25.23 but after the first restart i see the same problem.... must to do a hard reset ?? (i hope not)
i will try with soft reset...
the interesting thing if i connect the headset and start the music and pull out the headset i can hear the music in the phone speaker for 1-2 seconds...
any idea ???
i use the A.Z.T.O.R. X2 Ultimate WWE based on latest Official ROM
thx
No ideas????
Anyone have any new info? I tried the radio update to 1.09.25.23 but no luck. I checked the device info and it still shows 1.04 radio though. Does that mean it was not updated correctly??
Dear All,
I am now reading over the forums for about three days. But still I dont have a solution for my sync problem. The problem is that after I flashed my kaiser it won't connect to activesync. But the STRAINGE think is, that when I put it in bootloader the computer does regonize my kaiser, and I can flash another rom on it.
I also got a MDA touch and when I am connecting that one to my computer, everything workes fine. So the problem is not in the computer. What did i already tried:
- turned off the advance USB settings on the kaiser
- reinstalled my whole WINXP and try to connect
- reflash in VISTA and WINXP
- Put the original ROM back
- check if the repplog is in the Windows file
- Put the firewall off
- Googled on every thinkeble words
So i think that the problem is in te phone, because my touch is normaly connecting. The only thing my kaiser is doing now is when i put in on the computer is recharing.
Does sombody have the knowlegde of getting my kaiser back to sync? It will let me sleep a lot better!
Regards,
Gertjan
usually truing off the option (Enable faster data synchronization) fix the problem...
this is the first time time I read about such problem that was not fixed by all you did...
there are some other things, they may not work, but they're worth of a try:
1. try flashing different radio, not only ROM
2. try changing the USB port on your PC
3. did you try syncing with another PC?
I had a similar problem with one of my PCs, it used to sync with no problems, then it stopped! the other PC i have syncs with no problems
all I did is disable the option (Enable faster data synchronization) in USB to PC in the connections tab
I really hope you'll find a fix soon
Do you use Dashwire? I have to kill the Dashwire process to make sync work... Just wondering?
If I understand your post correctly, you have 2 active sync devices. Are they by any chance named the same? I had that problem with my HP 3955 which is nothing more than a universal remote now but I charge it with my computer and it connects to active sync. Anyways long story short I named my phone Ron_Mobile when I got it which is what my PDA is named and I had active sync problems.
Sorry didnt help
Fingerlickin said:
If I understand your post correctly, you have 2 active sync devices. Are they by any chance named the same? I had that problem with my HP 3955 which is nothing more than a universal remote now but I charge it with my computer and it connects to active sync. Anyways long story short I named my phone Ron_Mobile when I got it which is what my PDA is named and I had active sync problems.
Click to expand...
Click to collapse
Thank you for your reply regarding my problem, but I changed the name and reset my device. After that he is still recharging and not connecting.
No Succes
duke911 said:
usually truing off the option (Enable faster data synchronization) fix the problem...
this is the first time time I read about such problem that was not fixed by all you did...
there are some other things, they may not work, but they're worth of a try:
1. try flashing different radio, not only ROM
2. try changing the USB port on your PC
3. did you try syncing with another PC?
I had a similar problem with one of my PCs, it used to sync with no problems, then it stopped! the other PC i have syncs with no problems
all I did is disable the option (Enable faster data synchronization) in USB to PC in the connections tab
I really hope you'll find a fix soon
Click to expand...
Click to collapse
Thank you for your reply, i did all the things you suggested. And still nothing changed. I flashed a diffirent radio, changed the USB port and I alrady tried to sync with serveral other computers. The strainge thing was, that after a reflash of the ROM of Athene (that I use mostly) I suddenly get this problem, and before I didn't have this problem at all...
well hope that someone else can help me.
partly solved....
jorra said:
Do you use Dashwire? I have to kill the Dashwire process to make sync work... Just wondering?
Click to expand...
Click to collapse
Dashwire? didn't know the existing of this service, so i searched it up. This service is a very good alternative for the time that I dont have activesync to work.
you might want to reflash the rom. i had the same problem after using -G- series 4 for almost 3-5 months, all of a sudden activsync stop working for some odd reason. so i reflashed with the latest -g- rom and now everything works.
itzstevo said:
you might want to reflash the rom. i had the same problem after using -G- series 4 for almost 3-5 months, all of a sudden activsync stop working for some odd reason. so i reflashed with the latest -g- rom and now everything works.
Click to expand...
Click to collapse
I installed the latest Garmin but still no succes..
I had the same problem. It happened when I flashed one of g-roms on my vista laptop. what I did was uninstalled and then reinstalled wmdc because apparently what had happened is something messed up with the drivers that recognizes my phone. I also hardreset just for good measure. I hope that helps.
david2327 said:
I had the same problem. It happened when I flashed one of g-roms on my vista laptop. what I did was uninstalled and then reinstalled wmdc because apparently what had happened is something messed up with the drivers that recognizes my phone. I also hardreset just for good measure. I hope that helps.
Click to expand...
Click to collapse
Nope didnt work, also tried on other computers and reflashed couple of times...
Same problem
Yes, I had the same problem as you. Some ROM will do that and some will pass that ActiveSync with no problem. Personally, I had to go back to the ATT original ROM and ActiveSync works again. Strange, but true.
I had the same issue a week ago...it ended up being the usb port on the phone...had to have it replaced. But--since you can still flash via usb, that probably isn't the problem.
I would uninstall active synch or mobile device center reboot and reinstall...then connect the device.
ok I had a strange problem last night with my wife's G1, it made me think of this thread. I solved her problem and I doubt you have the same problem but here goes anyways.
My wife just got a G1. I plugged it into my computer to load some MP3's on it for her since the G1 is supposed to act like a MicroSD card reader. It started charging but no USB connection was detected. It worked on her computer but not mine. After an hour or so I finally figured it out. The USB cable I use for my kaiser has a 3 foot USB extension on it. after using a different cable without an extension it worked. Try another USB cable.
P.S. "load some MP3's on it for her" HAHAHA I just wanted to play with her new toy!!!!!!!!!!!!
Broken?
Thanks for all the reply people, but still no succes Can the damn thing also just be broken??
Regards
Hi there, I reset my Tilt to factory settings yesterday and now when I plug it into my computer it does not detect anything.
The phone does charge, so I know that the connection is there.
I've had this problem before but I can't remember what exactly it is that I did to fix it. I've searched the forum and I can't find anything helpful either.
Anyone know what I need to do to fix this?
Thanks!
jerryjohn said:
Hi there, I reset my Tilt to factory settings yesterday and now when I plug it into my computer it does not detect anything.
The phone does charge, so I know that the connection is there.
I've had this problem before but I can't remember what exactly it is that I did to fix it. I've searched the forum and I can't find anything helpful either.
Anyone know what I need to do to fix this?
Thanks!
Click to expand...
Click to collapse
Go to settings> connections > usb to pc> and uncheck advanced network functionality or enable faster data sync, Whatever it says.
hello,
i've got the same problem, did what you said, but it doesn't work...
and i need the mobile device center connection to flash my tytn! ;-)
mdbq said:
hello,
i've got the same problem, did what you said, but it doesn't work...
and i need the mobile device center connection to flash my tytn! ;-)
Click to expand...
Click to collapse
You should be able to flash using your micro SD.
ChumleyEX said:
You should be able to flash using your micro SD.
Click to expand...
Click to collapse
............but unfortunately you need to initially flash Hardspl thru your PC, from then on everything can be done through the SD card.
details details..
Have you tried another cable?
hi, i got this problem tu. i plug in the usb cable, but nothing appeared on my computer.id doesnt say it detected anything (usually it says found new hardware). i tried with several usb cables.still the same. but the phone is charged with all those cables i tried.
Yeah tried it and still got nothing. I am so stuck on what it could be.
I've tried 3 different cables and still have nothing. It worked a couple days ago, but ever since I reformated my phone it stopped working.
I don't understand why my computer doesn't automatically detect it as it did in the past.
reformat it again?
/grasp at straws
My tilt is doing the same thing. 2 days ago I was updating it and when I connected it to the computer nothing happened. Yesterday I tried flashing a new rom, thinking it would wipe it clean and make it connect again, however, it did not work. I am at a loss. Any ideas?
did hard reset and still unable to detect my phone.i'm using G.DK. ROM
i still have the problem
i trized a lot of cables, but from now the computer even don't say that it an unknown plyg is, he simply doesnt detect it. i'm just able to charge my phone, that's it
and in fact i just wanna put the official french rom on it because it's in dutch, i'm bilingual but it's more pleasant to have my phone in my mother language!
tahnks all of you for your help!
denco7 said:
Go to settings> connections > usb to pc> and uncheck advanced network functionality or enable faster data sync, Whatever it says.
Click to expand...
Click to collapse
Hmmm, this is starting to smell more than fishy with more and more complaints popping up... Just wiped out my laptop thinking it was an update that killed activesync; complete wipe and still no connection; every and any other type of usb cables connect flawlessly from camera, psp, ds, dsi, usb plug in all work no prob; yet kaiser refuses to sync even with new cables before and after activesync updates
Try a different PC if possible. Make sure Active Sync or Mobile Center is installed prior to plugging it in.
Another one
--DELETE THIS POST-- I added to it, then accidentally double-posted.
Another one
I'll add to the pile. Exact same problem. ActiveSync doesn't work, but phone does charge. Various cables used, hard reset done. Haven't yet flashed a new ROM, though. I'm using an HTC official 6.1.
Last successful run of ActiveSync was May 8th. I used System Restore on my PC to pre-date May 8th. Still nothing.
Didn't make any major installations to either the PC (XP SP3) or the Tilt on or around that date. It just...stopped working.
All other functions seemed to work normally, except that I got an alert from QuickGPS that it hadn't been updated since that date. I was able to update that successfully.
Same problem on my fathers tytn II... probably HW prob. Will look into it...
igord said:
Same problem on my fathers tytn II... probably HW prob. Will look into it...
Click to expand...
Click to collapse
Yep, it's definitely a hardware issue with the Kaisers usb port not fully connecting; I pushed the usb bar in a bit with the back end of the stylus and presto! Connected immediately
I'll also confirm success by the use of a little bit of brute force. Back end of stylus, a little manipulation, connect, and the "ba-DING!" sound in XP. Wish I'd done that before a hard reset...