Database Develop

Freezing Issue with N2A's HTC Homeplug Weather fix

I installed the HTC Kaiser DLL replacement installer and then restarted my device. Now when it boots it won't go past the my info (owner info) screen. If I try to do anything at that screen whole device goes black and frozen I have to reset again. Anyone having this similar problem or know how I can fix it? I would really appreciate the help!
I was running WMobile 6.1 with the RUU_Kaiser_HTC_WWE_3.03.405.0_radio_sign_25.70.40.02_1.64.06.04 ROM
Once or twice somehow it got to the unlock screen but I can't get back there now I don't know how it got there the first times either just reset after reset.
Thanks
I was able to enter bootloader and reflash the rom. Held down camera button and used the stylus to push the little reset button next to usb port. Then ran rom updater as normal

System hang after hard reset

The last weeks i suffered more and more hangs of my tytn II,
i decided to do a hard reset to clean up the system.
i did this, however, when the system rebooted it keeped hanging on:
"The device is erasing the memory, please be patient"²
i am using windows mobile 6.1 (dutch) from vodafone
i never tried to install custom roms
²: for easyness, translated the message into english
obviously i cant establish a connection to my pc without WM starting up...
does someone have expierenced this before, or knows a solution?
Stefan

Problem solved...
solution:
enter the SPL mode by pressing the power and camera buttons, and press the reset button with the stylus...
plugin usb, and flash your branded HTC rom

PLEASEEE HELP ME! Nothing except the tri color boot screen!

Greetings Dears,
Please help me, my X1 giving me only tri color boot screen, i tried soft reset many times, i tried hardreset and it didnt work, i removed the battery for a long time and when started also giving me the same !! i did Hard SPL before, i tried also upgarding the Radio ROM through SD card and it gives me Update Complete and Success and tried to reset it but also gives me the same boot loader image!!!
What should i do? i need to access the device for the data, i have a lot of info i need to retrive fom there...is there any one can help?? Please how can i get out of the Bootloader screen
Thanks
Ash

More Info
By the way, i have the following info on the screen
KOVS110
SPL-0.72.OliNex
MicroP1-787
MicroP2-707
Regards
Ash

If you have made a hard reset, data on your phone are lost (except data on your SDcard)
Try to flash a new rom trough SDcard

Thanks, here is the point i dont want to flash the ROM because i dont want to lose the data, i just tried the manual Hardreset to test if the device will get into the H/R menue , but it didnt!
Can you help in why this happend? and why nothing except the bootloader appear? i turning crazy about the data
Thanks

Guys,
Tried flashing using the SD card, after finishing i did a soft reset using the stylus and again it boots into the boot loader only
Help Pleeeeeeease
Thanks

My diamond freezes at start up screen, HELP

I tried to flash a rom for my diamond after doing the hard spl, after the rom finished flashing and installation of the cab files finished I soft reset the device because it did not do it by its own, when resetting the words touch diamond and the three red lines appeared and that was it the screen froze and my diamond didn't do anything else. I tried leaving it for a while but nothing changes.
I urgently need help to fix this problem, with the complete steps to do so.
Thanks in advance

Same thing happened to me.
What I did:
1. Hard reset the diamond.
2. After installation of cab files finished i did not soft reset it.
3. Conected it to the ActiveSync
4. Flashed in another ROM.

i hard reset my device, many times but nothing happens. when my diamond boots up again after the hard reset it the same problem occurs again
i really dont know what to do

S.dahmy said:
i hard reset my device, many times but nothing happens. when my diamond boots up again after the hard reset it the same problem occurs again
i really dont know what to do
Click to expand...
Click to collapse
Put it in bootloader and flash the rom again. Then after the flash completes hard reset. Then let it boot and then install your cabs.

My diamond doesent work fine after change ROM

Hello everybody,
I have a bad problem with my diamond, yesterday I tried to update my Gen.Y 5.3 ROM with Memo 2.5.1.0 ROM.
After flashing, my diamond will restart, as always, but the first time it makes an error with trying install something like "windowslive.update".
After this error my device was blocked.
I had remove the battery and restart it, nothing to do, it remaing blocked into first black screen so you see the ROM version.
So I have make hard and soft reset but nothing.
So I have launched bootloader with volDown+Reset and reflash Diamond with Gen.Y 5.5, now my device starts (not always) but after a little second it blocked again.
I need to remove the battery, but always the ROM reinstall himself with reset of contacts,SMS and recalibrate e reinstall all programs...
anybody have any idea what can I do?