Database Develop

Rogers Name Display!

Let's get this solved. I willing to Donate $25 dollars to the person who solves this mystery.
Rogers Name Display:
What is it?
Rogers Name Display is a enhanced call display, instead of normal call display service displaying a number, it also sends the cell phone their name and the number.
eg: normal call display: 1-416-222-2222
eg: Rogers name display: Joe Smith 1-416-222-2222
name will display even though you dont have it in your phonebook.
this is just a software issue, not a hardware issue as Rogers carries their own branded htc phone like Touch, Tytn. it works with their rom but it wont work with a non branding phone.
I am not smart to figure this out, someone out there will be able to figure this out.
So far here are the following discussions about it that have lead to the following:
You can find the setting in HKLM\Drivers\BuiltIn\RIL on a Rogers Branded software, but if you upgrade or don't have a rogers branded device it won't be there, if that is the case, then add the following entries. If you change these keys to a value of 1 (default 0) it should work:
Enable Rogers ALS
Enable Rogers CBM
Enable Rogers CNAP.
Click to expand...
Click to collapse
<!-- Enable Calling Name Presentation (CNAP) functions for Rogers -->
<characteristic type="Registry">
<characteristic type="HKLM\Drivers\BuiltIn\RIL">
<parm name="EnableRogersCNAP" datatype="integer" value="1" />
</characteristic>
</characteristic>
<characteristic type="Registry">
<characteristic type="HKLM\Software\HTC\RIL\RILConfig" translation="filesystem" >
<parm name="EnableSpnOnsEonsFeature" datatype="integer" value="64" />
</characteristic>
</characteristic>
Click to expand...
Click to collapse
Rogers Rom for the savvy: http://rapidshare.com/files/79093298/Rogers.zip.html

Hello,
I don't really get how to enable name display. where would I find the following to change them to value "1":
Enable Rogers ALS
Enable Rogers CBM
Enable Rogers CNAP.
Click to expand...
Click to collapse
moreover, what is the following code, and what do I do with it?
Code:
<!-- Enable Calling Name Presentation (CNAP) functions for Rogers -->
<characteristic type="Registry">
<characteristic type="HKLM\Drivers\BuiltIn\RIL">
<parm name="EnableRogersCNAP" datatype="integer" value="1" />
</characteristic>
</characteristic>
<characteristic type="Registry">
<characteristic type="HKLM\Software\HTC\RIL\RILConfig" translation="filesystem" >
<parm name="EnableSpnOnsEonsFeature" datatype="integer" value="64" />
</characteristic>
</characteristic>
Thank you

I didnt download the rogers rom and go through it, so I dont know if those are the only keys required to enable Name Display. Here is a cab that will create the keys you've listed with the appropriate values. Make sure to soft reset after install.
Tin

thanks alot for that!
However, I tried that and it didn't work.... Does anyone know why?

any Fido or Rogers customers that managed to get name display working???

there is a program on handango.com that is supposed to be able to this same thing it has a free trial its Mobile Caller ID for WM 6P Quarterly
by I D You, LLC . i dont know if it works because the only people that call me are already in my phone book and i didnt bother to remove them. good luck.

Just need someone to cook more roms with the Rogers rom that already has it haha.

Tupac_Shakur said:
Let's get this solved. I willing to Donate $25 dollars to the person who solves this mystery.
Click to expand...
Click to collapse
bloody hell... I knew it! Tupac lives!
good to have You here Pac.
...
sorry for the offtop

I'll d/l the rogers rom and see what i find. No guarantees.
Tin

I downloaded the Rogers.zip file and ran it.
Gave me an error 'upgrade only.' I have a Rogers unlocked Treo 750 with WM 6.1
So I copied the RUU_signed.nbh file onto an SD card and renamed it CHEEIMG.nbh
It want through the update. At the end, I reset it and the nothing. Simply a dark screen.
I've now tried to re-install WM 6.1 via the SD card and it gets to about 85% and then 'Update Terminate UPDATE FAIL.'
So apparantly I've bricked my Treo
Any ideas?

Any updates on getting this to work?

Another canadian here that would love to see this happen!!

Same Issue?
http://forum.xda-developers.com/showthread.php?t=431124
Ta
Dave

I've been asking around for this exact issue here.... I would LOVE if a person can get this to work.... I'm throwing an extra 15 bucks whomever solves this issue correctly....

http://forum.xda-developers.com/showpost.php?p=2719151&postcount=1145

How to display Java Games in Full Screen ?

Hi,
I tried a few java games today from gameloft, and they eventually showed up 320x240 (which is very small) on my diamond.
Anyone knows a way to make the game to show full screen ?
Any help would be appreciated.. thanks
(I've tried the 'search' button)

denis_sianto said:
Hi,
I tried a few java games today from gameloft, and they eventually showed up 320x240 (which is very small) on my diamond.
Anyone knows a way to make the game to show full screen ?
Any help would be appreciated.. thanks
(I've tried the 'search' button)
Click to expand...
Click to collapse
AFAIK there is no way of scaling up games. you need to install 640x480 games to get full screen (as that is the screen res).

Any links ?

of course not, we don't condone warez

to be honest, i havent found any worth playing!

Addicteddddd said:
of course not, we don't condone warez
Click to expand...
Click to collapse
Links to online shops?

Mr.Sir said:
Links to online shops?
Click to expand...
Click to collapse
Google?

Many games are "clever" to detect the screen resolution, not because the VGA as we have in diamond , because of
many kinds of mobiles with many resolutions, i have some java games working fine with the vga resolution (beside the
fonts are too small)

java
there is a small app to change resolution, You have to open *.jar file and edit something, google it cause i do not remember all

If you are going to buy a game, bejeweled 2 is great!

mugglesquop said:
Google?
Click to expand...
Click to collapse
I don´t want that, I just wanted to point that links to shop is not warez, or is it? What is warez? I thought it was pirated stuff.

mugglesquop said:
to be honest, i havent found any worth playing!
Click to expand...
Click to collapse
I had Puzzle Quest Warlords on my Instinct. I would like to be able to play that one on my Diamond.
It's basically Bejeweled with kind of an rpg storyline twist. Fun and addictive.
Can't seem to get it to run with Esmertec tho.

denis_sianto said:
Hi,
I tried a few java games today from gameloft, and they eventually showed up 320x240 (which is very small) on my diamond.
Anyone knows a way to make the game to show full screen ?
Any help would be appreciated.. thanks
(I've tried the 'search' button)
Click to expand...
Click to collapse
Some games can be changed by modifying the MANIFEST.MF file.
Here is an example (using the excellent 7Zip Program)...
Open 7Zip
Browse to your Java Game & open it
Open the folder "META-INF"
in the "META-INF" folder should be a file called "MANIFEST.MF" - right click it & choose Edit [F4] - the file should open in a text editor (i.e. Notepad).
Perform edits...
If the file contains the lines (or something similar)
Code:
Nokia-MIDlet-Original-Display-Size: 176,208
Nokia-MIDlet-Target-Display-Size: 240,320
change them to
Code:
Nokia-MIDlet-Original-Display-Size: 176,208
Nokia-MIDlet-Target-Display-Size: 480,640
Otherwise, just add them.
Mostly, you need to get the Original-Display-Size correct and even then, this doesnt work for all games.
If that doesnt work, then I have found some games contain the lines
Code:
LGE-MIDlet-TargetLCD-Width: 240
LGE-MIDlet-TargetLCD-Height: 320
Obviously these can be changed to
Code:
LGE-MIDlet-TargetLCD-Width: 480
LGE-MIDlet-TargetLCD-Height: 640
Close the text editor & save your edits
Click yes on the 7Zip message box to update the original archive
Transer the modified JAR to your device, install it & cross your fingers.
NOTE: I am by no means an expert in this arena - this info comes from searching the net, opening many JARs & trial and error (i.e. your questions will likely go unanswered).
Give it a shot - might work - I've had about 40% success.
Regards, Steve.

How do I make a shortcut to the Youtube app (Fuze)

I found the program but I can figure out how to make it go somewhere more accessible. Any help would be great. Thanks.

i would like
to know this too

I think they pulled this off the Fuze. They want you to use AT&T video stuff.

stevierg said:
I think they pulled this off the Fuze. They want you to use AT&T video stuff.
Click to expand...
Click to collapse
no the app is sitting is the windows folder...
and works fine

stevierg said:
I think they pulled this off the Fuze. They want you to use AT&T video stuff.
Click to expand...
Click to collapse
The youtube player is definitely on the FUZE its just not on the programs menu or the tf3d internet tab. Its hidden in the windows directory. You will have to go searching for it.

In that case use file explorer on the device and copy the youtube.exe file.
Go to the windows\startmenu\programs folder and then paste a shortcut.
Just tried it out and it works fine.

the app shows for me but does not play when copied anyone else having this issue?

I added it to the Internet tab on my Fuze, just under the homepage button and above my favorites. (Where it is on all the European versions of the Touch Pro!)
The process isn't too difficult but you'll need a good file explorer like Total Commander and if you're not comfortable editing Read-Only TF3D files, then DON'T TRY THIS!!
You'll need to edit the InternetPortal-en-US.xml file located in the \Application Data\Manila\ folder, so it's probably a good idea to make a backup of the file before you start messing with it.
Find the <OperatorLinks> section in the file.
Between <OperatorLinks> and </OperatorLinks> add this text:
<Link
Text="YouTube"
Executable="\windows\youtube.exe"
ImagePath="\Windows\HTC\Assets\Images\InternetPortal\youtube.qtc"
/>
Save the file and make it Read-Only again and you should have a YouTube icon on your Internet tab.

ITNV said:
I added it to the Internet tab on my Fuze, just under the homepage button and above my favorites. (Where it is on all the European versions of the Touch Pro!)
The process isn't too difficult but you'll need a good file explorer like Total Commander and if you're not comfortable editing Read-Only TF3D files, then DON'T TRY THIS!!
You'll need to edit the InternetPortal-en-US.xml file located in the \Application Data\Manila\ folder, so it's probably a good idea to make a backup of the file before you start messing with it.
Find the <OperatorLinks> section in the file.
Between <OperatorLinks> and </OperatorLinks> add this text:
<Link
Text="YouTube"
Executable="\windows\youtube.exe"
ImagePath="\Windows\HTC\Assets\Images\InternetPortal\youtube.qtc"
/>
Save the file and make it Read-Only again and you should have a YouTube icon on your Internet tab.
Click to expand...
Click to collapse
il be giving this a shot
does it get rid of the stupid media net link or is there a way?

lbhocky19 said:
il be giving this a shot
does it get rid of the stupid media net link or is there a way?
Click to expand...
Click to collapse
Yeah, you can change the default launch page in that file, too.
In the <Banner> section, edit the NavigateURL to whatever page you want it to open by default and change the Text to match.
e.g.
NavigateUrl="http://www.google.com/"
Text="Google"

ITNV said:
I added it to the Internet tab on my Fuze, just under the homepage button and above my favorites. (Where it is on all the European versions of the Touch Pro!)
The process isn't too difficult but you'll need a good file explorer like Total Commander and if you're not comfortable editing Read-Only TF3D files, then DON'T TRY THIS!!
You'll need to edit the InternetPortal-en-US.xml file located in the \Application Data\Manila\ folder, so it's probably a good idea to make a backup of the file before you start messing with it.
Find the <OperatorLinks> section in the file.
Between <OperatorLinks> and </OperatorLinks> add this text:
<Link
Text="YouTube"
Executable="\windows\youtube.exe"
ImagePath="\Windows\HTC\Assets\Images\InternetPortal\youtube.qtc"
/>
Save the file and make it Read-Only again and you should have a YouTube icon on your Internet tab.
Click to expand...
Click to collapse
Badass thank you so much!!!

Worked like a charm! Thanks!

This worked great.... Could you do a favor and put an app that would add windows live mobile just above or below the same youtube link?

Hmm. I found the app in \windows and ran it. It just sits there spinning and saying downloading. I waited several minutes, but it appears to be hung rather than doing anything; in particular, sliding out the keyboard doesn't change it to landscape mode. I am connected; I can run Opera and get to web sites. Any ideas?

wmm said:
Hmm. I found the app in \windows and ran it. It just sits there spinning and saying downloading. I waited several minutes, but it appears to be hung rather than doing anything; in particular, sliding out the keyboard doesn't change it to landscape mode. I am connected; I can run Opera and get to web sites. Any ideas?
Click to expand...
Click to collapse
Mine did the same thing the first time I ran the YouTube app. I had to change the category using the buttons at the top (from Featured to Top Rated or vice-vera) and then it worked fine.

christian15213 said:
This worked great.... Could you do a favor and put an app that would add windows live mobile just above or below the same youtube link?
Click to expand...
Click to collapse
this should work. just add this line after the YouTube one:
<Link
Text="LiveSearch"
Executable="\Program Files\Live Search\LSLaunch.exe"
ImagePath="\windows\msn.bmp" />
that's not a very good icon but it was all i could find and it's better than nothing. i'm sure someone on here can recommend a better icon but that should give you the general idea for adding apps to the internet tab.

I can't seem to find the youtube.exe program file anywhere. I looked in my programs on the Fuze and all the directories in windows explorer to no avail. Am I looking at the wrong place? Or can I download this file somewhere and install it? I am new to WinMo devices and everything is just so new to me. Any help will be greatly appreciated.

ITNV said:
Mine did the same thing the first time I ran the YouTube app. I had to change the category using the buttons at the top (from Featured to Top Rated or vice-vera) and then it worked fine.
Click to expand...
Click to collapse
Doesn't work for me -- still just "Downloading..." forever. Anybody else have any ideas?

Youtube Icon
Great advice IT, my main MediaNet globe icon was set to device.home which was a dead link or something, just hung every time I pressed it, changed it as you described and works pefectly. The YouTube works as well, but I have a question:
<Link
Text="YouTube"
Executable="\windows\youtube.exe"
ImagePath="\Windows\HTC\Assets\Images\InternetPort al\youtube.qtc"
/>
The \Windows\HTC folder doesn't exist (from what I can find) on my Fuze, and the Icon on the tf3d tab is just a white square. Any hints on why that would be, I copied this exactly, even put the /> on a separate line to end etc and no go.
Thank you very much.

cparkhorn said:
Great advice IT, my main MediaNet globe icon was set to device.home which was a dead link or something, just hung every time I pressed it, changed it as you described and works pefectly. The YouTube works as well, but I have a question:
<Link
Text="YouTube"
Executable="\windows\youtube.exe"
ImagePath="\Windows\HTC\Assets\Images\InternetPort al\youtube.qtc"
/>
The \Windows\HTC folder doesn't exist (from what I can find) on my Fuze, and the Icon on the tf3d tab is just a white square. Any hints on why that would be, I copied this exactly, even put the /> on a separate line to end etc and no go.
Thank you very much.
Click to expand...
Click to collapse
It's not that picky, you don't need to put the /> on a separate line. For some reason a space got inserted into InternetPortal when I posted this so you might want to check to make sure you didn't include the space in your file.
I don't have a \Windows\HTC folder either. I'm pretty sure it's some kind of virtual directory that TF3D uses. I looked around a little in the Manila editing thread in the Diamond ROM forum but it's way more complicated than I want to deal with. I'm not sure why I have that icon file and you don't but I'm not running the standard AT&T theme so that might be part of the problem.
You can edit the ImagePath to point to a .jpg file that you want to use as an icon, too. For example, if you take the youtube.jpg file attached to this post and copy it to your \Windows directory on your Fuze, you can change the ImagePath to "\Windows\youtube.jpg" and that should work.

Cooking a Root CA Certificate (and a provxml question)

I've been trying to mix in the Root CA certificate for my Exchange server for the last couple of days, but so far I haven't had any luck. It always complains that the certificate for the server isn't valid until I manually run the .cer file.
I've search around google quite a bit, but so far I've only come up with one answer that even looked promising. It involved adding the bit below to a provxml file.
Code:
<wap-provisioningdoc>
<characteristic type="CertificateStore">
<characteristic type="ROOT">
<characteristic type="54567ea2c0c362b1105c9d3efa57cccc8ed46576">
<parm name="EncodedCertificate" value="<!-- CERTIFICATE DATA HERE -->" />
<parm name="Role" value="16" />
</characteristic>
</characteristic>
</characteristic>
</wap-provisioningdoc>
I added it, with the certificate data actually in it, to mxipupdate_oemoperators_104.provxml, along with the other certificates that were already there.
Can someone tell me what the right answer is?
Also, I've been trying to make sense of the provxml system. From what I've read, it sounded like mxipcold_<PACKAGE_NAME>_*.provxml and mxipupdate_<PACKAGE_NAME>_*.provxml are run automatically. Is this correct? What about the other *.provxml files that don't follow that naming convention?
For reference, I'm using the Ervius Visual Kitchen (1.8.2).

Here is what mine looks like:
Code:
<?xml version="1.0" encoding="us-ascii"?>
<wap-provisioningdoc>
<characteristic type="CertificateStore">
<characteristic type="ROOT">
<characteristic type="User">
<characteristic type="309A7959AD799659277EDAB84284152E537F419A">
<parm name="EncodedCertificate" value="Certificate Data Here" />
</characteristic>
</characteristic>
</characteristic>
</characteristic>
</wap-provisioningdoc>
I run it as part of user customization using a name like cert.xml
Seems like you should be able to put it in one of the provxml files as well but I have not tried it since it works fine for me right now.

An explanation of the Certificate XML
I think I've finally figured out what I was doing wrong. I found an explanation of the CertificateStore syntax from TechNet that shows the mistake. (It also shows how to make a cab that installs certificates.)
Code:
<wap-provisioningdoc>
<characteristic type="CertificateStore">
<characteristic type="ROOT">
<characteristic type="<certhash>">
<parm name="EncodedCertificate" value="<base64encodedcert>"/>
</characteristic>
</characteristic>
</characteristic>
</wap-provisioningdoc>
Apparently the type is supposed to be the thumbprint of the certificate. So, no matter where I put it, it was rejecting my certificate as invalid since both parts weren't from the same certificate.

You could also just use SSLChainsaver...
You could also just use SSLChainsaver (link at bottom)... That would be the smart way to do things. And that way you can use it as cab instead of bulk XML, and tag it to your SDConfig.txt. As a matter of fact... use SSLChainsaver and this .bat script and you should be fine. I assume you're using EXCH2007 like me, if not it should still work on 2003 just fine- no data on 2010 yet. P.S. I got the script from somewhere on here but it took literally hours of searching for it to find it the first time... Good luck!
_____________________________________
@echo off
set mailserver=mail.mycompany.com
set /P mailserver=Please enter your mailserver (%mailserver%) + [ENTER]:
SSLChainSaver.exe %mailserver%
copy %mailserver%.wm6.xml _setup.xml
makecab /d compress=off _setup.xml %mailserver%.cab
echo Done! Copy %mailserver%.cab to your provisioning folder and add it to your UC (SDConfig.txt) or SASHIMI script
pause
_____________________________________
http://www.microsoft.com/downloads/...55-6590-4643-8e7f-11c177104de2&DisplayLang=en

Vertigo1md1032 said:
You could also just use SSLChainsaver (link at bottom)... That would be the smart way to do things. And that way you can use it as cab instead of bulk XML, and tag it to your SDConfig.txt. As a matter of fact... use SSLChainsaver and this .bat script and you should be fine. I assume you're using EXCH2007 like me, if not it should still work on 2003 just fine- no data on 2010 yet. P.S. I got the script from somewhere on here but it took literally hours of searching for it to find it the first time... Good luck!
Click to expand...
Click to collapse
I added support for UC (and SDConfig.txt) to the ROM I'm cooking, but haven't built a new build of it to try it out yet. I've already gotten the change made in the xml file referenced in my new SDConfig.txt, but if that doesn't work, I'll give this a shot.

[Q] Best way to test XML files for XDAUC

So, I'm trying to develop my own XML file for XDA_UC, but I don't have a really efficient way of doing this. Could someone tell me how they do it?
My primary goal is to move shortcuts. Can I accomplish that task by this:
Code:
<characteristic type="%CE2%\Start Menu\Programs\Tools" translation="install">
<characteristic type="MakeDir" />
<characteristic type="CHTEditor.lnk" translation="install">
<characteristic type="Move">
<parm name="Source" value="%CE2%\Start Menu\Programs\CHTEditor.lnk" translation="install"/>
</characteristic>
</characteristic>
Thanks
Smith

smithisize said:
So, I'm trying to develop my own XML file for XDA_UC, but I don't have a really efficient way of doing this. Could someone tell me how they do it?
My primary goal is to move shortcuts. Can I accomplish that task by this:
Code:
<characteristic type="%CE2%\Start Menu\Programs\Tools" translation="install">
<characteristic type="MakeDir" />
<characteristic type="CHTEditor.lnk" translation="install">
<characteristic type="Move">
<parm name="Source" value="%CE2%\Start Menu\Programs\CHTEditor.lnk" translation="install"/>
</characteristic>
</characteristic>
Thanks
Smith
Click to expand...
Click to collapse
I don't know if this answer is of any help, but in the valkyre roms we use silent_uc. This works with any rom with mortscript cooked in.
http://forum.xda-developers.com/showpost.php?p=4699952&postcount=5
You just copy the files from the start menu to your sd card in the map silent_uc/root/windows/start menu en it will install. I think that it's much easier then making a .xml Just a suggestion.

Lennyz1988 said:
I don't know if this answer is of any help, but in the valkyre roms we use silent_uc. This works with any rom with mortscript cooked in.
http://forum.xda-developers.com/showpost.php?p=4699952&postcount=5
You just copy the files from the start menu to your sd card in the map silent_uc/root/windows/start menu en it will install. I think that it's much easier then making a .xml Just a suggestion.
Click to expand...
Click to collapse
Great advice, I guess I didn't know silentUC could do that. Too bad Valkyrie is the only ROM (that I've ever really seen, I guess) that uses it. If simplicity or energy used it, that would be awesome.
I haven't played with Valkyrie much, but when I did it was beta Cookie-FX 23xxx and it was very, very slow (that was like a week ago). Was that just a fluke? Is it normally a good ROM?
Regards
Smith

In Energy roms its in XDA_UC\Start Menu\.

XirXes said:
In Energy roms its in XDA_UC\Start Menu\.
Click to expand...
Click to collapse
Will that move shortcuts though? Say, from the root of the start menu to start menu\tools?
Thanks
Smith