I've done a search and seen this has been asked before but I haven't seen a solution (if there is one). My phone can connect to my Wifi network if it is not hidden but as soon as I hide it, my phone no longer connects. The "This is a hidden network box is selected when I try to connect.
Related
Hi,
I've got an Alpine and all the ROMs are simple out-of-the-box as from O2 back in september.
Previously, I would use it to connect to the wireless network in my university. I would turn on the wifi then select the network to connect me to the internet and then enter the wireless key we have been provided with.
However, now it just stays on 'scanning network' and doesn't prompt me to choose a network or enter any key. Sometimes it claims that an IP has been assigned, but it doesn't progress past this. I have tried soft resetting and changing the wifi from 'best battery' to 'best performance'. I have also tried being really near the router.
My friends can access this network just fine on their laptops, and when I run WiFiFoFum it shows up just fine. I am pretty certain the router is a 802.11g one, and I can't tell if it's been changed since I could access it before.
My problem is I know virtually nothing about WiFi, so I don't know how to troubleshoot this. I was hoping someone could give me a bit of help?
Thanks.
try this.
turn wifi on
go to settings
connections
network cards
see if you have networks listed, if u do delete them.
turn off wifi and turn back on again so it searches. see if it picks up the network.
Failing that what IP is it showing u, if its assigned one??
Ok, this was working fine on the original AT&T ROM, but since I flashed to dutty's ROM, I cant get it to work. How do I force the phone to use wifi for net access when wifi is turned on, as opposed to medianet? Currently, I have to keep manually switching from medianet to "my work connection" in connection settings.
You can use Kaiser Tweak to set it to disconnect the GPRS connection after a set amount of minutes of inactivity. Then, when you enable WiFi, it should connect ONLY to WiFi.
I think the OP needs to sort out his "work" and his "internet" instead of just trying to turn off radio data.
I have medianet set to internet and my wifi set to work...not really clear what "work" is....just want to automatically use wifi when wifi is connected, and cant find the option to do that.
Anybody???
I did set both connections to "work".
Additionally I added my tmobile gprs connection to the work profile.
All seems to work great.
I can acces my network shares over wifi and connect to the internet. When no wifi is available it connects via gprs.
I keep getting confused on this same issue. i installed the same rom we are talking about. it shows up for me when setting up email accounts. with my wifi turned on, it still tries to go out the 3g connection. I want it to use wifi if that is what is turned on and i think that was working on the death star rom. For the drop down that says "The Internet" I basically want that to point to wifi if on then fall back to 3g. How do we do that?
It should not be named "work".
So whats the solution here?
Under Connections....Select which networks are automatically used:
Programs that connect to the internet should connect using ???
I can either choose Medianet or my work network, I'd like for it to use wifi when available, how is this done?
Programs that connect to a private network should connect using ???
I have this set to my work network.
Easy Solution to 'Auto Wifi"
Buy an Iphone, works seemlessly, and you get a browser too which works, something these HTC phones havn't had in 3 years.
The easiest way to force wifi (since gprs can be acting as a ***** ), is to keep wlan enabled and to install the NOGPRS.cab (aka the modaco nodata plugin) which allows you to disable (but keep) the gprs settings and which you can toggle on (and back off) when needed.
Great little app, saves much annoyance!
Is there an easy way to toggle wi-fi on/off, that can be assigned to an icon or button? At the moment I have to open Comm Manager each time and do it from there.
Rob F
I just got the data plan and have yet to be able to connect to it? I've tried messing with the KaiserTweak settings. I have data connections enabled. I also enabled leave connection always on but that gave me the connection is not active icon. When I disable that function all I get at the top of the screen is an "H". What do the settings need to be in order to get the data connection properly functioning? I've yet to see the connection is active icon up top.
Update
I am able to update the weather on the HTC home page I'm using by enabling the data connection on all the time but the browsers still do not connect. I also don't see the active data connection icon.
did you uncheck proxy ? if not , do so
Proxy is already unchecked.
You do have a data connection the H means = HSDPA
(Like a 3G connection but faster)
http://en.wikipedia.org/wiki/HSDPA
Also try refreshing your settings (This works for me... and it's annoying!)
Start>Settings>Connections>Connections>Manage my existing connections.
Then "Next" thru all the settings until you get to the end. Press Finish. The data connection drops and the re-establishes.
See if your browser then works.
When I follow that path under connections I don't see a manage my connections option. All I see is "My work network" with 3 options under that. Add Modem, add vpn server and set up proxy.
Try this
Try these files. I use them whenever I flash a new rom and haven't had any trouble connecting since then.
One has all the medianet/isp settings and the other is for mms. I know you didn't say you have a problem with mms, but just in case
Just run and reset and everything should work.
Thanks, I'll have to try those when I get home. The browsers do connect to Wifi with no issues. Could there be a conflict with that? When there is wifi connection available which connection will it grab onto? Wifi of MediaNet? Those files won't affect the current wifi settings used to connect will it?
FuSchnickens said:
Thanks, I'll have to try those when I get home. The browsers do connect to Wifi with no issues. Could there be a conflict with that? When there is wifi connection available which connection will it grab onto? Wifi of MediaNet? Those files won't affect the current wifi settings used to connect will it?
Click to expand...
Click to collapse
I've never had them interfere with WiFi since I use WiFi at home and MediaNet at work.
The settings cab is a pretty simple cab, it really just fills out all the information in the boxes to set up the connections but it saves a lot of time and gets everything right, for me at least, in one shot.
Let me know how it goes.
I tried those cabs and I still can't get any of the browsers to work. Nor my email. I keep getting a connect connect message. Anyone know the proper settings to get the browsers to work? However the weather is able to update on my HTC home page.
i dont nknow if youve tried this but everytime i flash a new rom i have to do this or ill have the same problem.. in your connections settings go through the meus until you find this device connects to: and by default it should say the internet.. but you have to select media net (att right?) cus thats the only way apparently media net is not the same as the internet!
ex: go to setings > connections > connections (icon) > advanced > select networks > "programs that automatically connect to the internet should connect using: and itll probably be set to my isp and you ewant it on MEdia net
a frustrating problem I might say. I've connected to an "unsecured" Wifi connection, but when I open the web browser it shows me a blank page. I can't even update my weather program.
I did explore the Wifi settings previously. Did I messed-up with the Wifi settings?
*I've done a search here and nothing match the problem that I've encountered. Please re-direct me with a link if you found one
This may seem obvious, but does this "unsecured" network actually have internet access? Just because it's wifi doesn't mean it's connected to the net.
me and few buddies hanging at starbucks.. all of them having no problem on the wifi connection. is there any way to retrive back default settings without perform a hard reset?
really frustrating... anyone?
You can try to go to settings -> wireless lan -> power mode and put the cursor on "best performance"
Strange issue with my Tilt... when my apps try to connect to the internet using MEdiaNet they just close out... when I use them on a wifi connection they work with no issues.... Internet connection sharing also works fine when I tether to my laptop....
Currently using ROMeOS 3.5
Any ideas?
---UPDATE----------
After a hard reset this is the current status-
Apps are no longer closing out but some are getting a "cannot connect with current connection settings" message
PIE- connects with no issues
Google Maps- connects with no issues
Internet Connection Sharing- connects with no issues
Skyfire- Does not work... keeps on checking for flight mode
Email- Does not work- "cannot connect with current connection settings" message
is
settings->connections->connections->advanced->select network
set to my isp or whatever your device have named the gprs settings profile
if not change it so it is
Also if you have at&t go to start/settings/connections/connections. You should see MEdia Net with options underneath and My Work Network with options underneath it. Underneath MEdia Net, click the option set up my proxy server. Disable the option that says "This network uses a proxy server to connect to the internet." Hope this helps
I started having the same problem the other day. My pocket outlook will not connect using Media Net, I get the "Cannot connect with current settings" message. i didn't change anything before this started and I have tried all of the above suggestions. Does any one have any other suggestions? I will do a Hard reset only as a last resort. Thanx