Hey Guys i would need some help here i downloaded the Helmi upgrade rom but didnt seem to work. i get the device connection error before it even starts
i downloaded the official rom that i found on this forum on this link
ftp://ftp.clubimate.com/PDA2k_WWE_14000_176_11200.exe
as u can c this is the one from the Imate website when i attempted to install it. it actually didnt give me a connection error and started to install but when the PDA rebooted i got that connection error back and now i am stuck at the bootloader screen with SERIAL written at the top and V. 2.06 at the bottom tried to soft and hard reset but nothing seems to happen i even disconnected the battery for 30 minutes but couldnt get it to boot
Anybody pleeeeeease heeeeeeeeeeelp!!!!!!!!!!
Thanx
Please give us more information.
What windows are you running? XP or Vista?
Do you have an error number?
I run windows Vista and the error number i get is 101 Connection error when i attempt to run BaUpgradeUT
on the PDA the only screen i fet is the bootloader screen with SERIAL and V.2.06
Ok, the problem in flashing our precious BA under vista is that you need to replace the usb driver with an old version so the updater will work correctly.
Search the forums for vista update or vista flash and you will get the answer and the driver you need.
thanks a lot i ll try it right now been waiting for this
OK i just searched for vista flash and found this post
http://forum.xda-developers.com/showthread.php?t=313001&highlight=vista+flash
tried it it worked done upgrading and now i have WM5 on my PDA2k
thanx alot u really saved my day
i am looking for imaginet arabizer for it now to fully enjoy the experience
And one more thing i have to thank Duanes who posted up the vista upgrading manual linked above Thank you
Hi
I have a cingular hp 6515a . I cannot unlock it.I need an unlock hp 6515 rom image.please help me.
Unlock hp 6515
Thats very easy.
1: Download the (upgrade and unlocked) ROM from HP's website
2: HardReset your phone, but leave it in the first welcome screen (before the align screen and so)
3: Connect the phone to your PC, and wait for the connection to be established.
4: Run the downloaded Upgrade package (from HP), the phone will show a bootloader-screen.
Sometimes, the phone will not accept the upgrade program.
In that case do the following, but nothing else!
1: Disconnect the phone and soft reset it (it will come back into the bootloader)
2: Close the HP-upgrade program with taskmanager on your PC
3: Reconnect the phone to the PC
4: Rerun the HP ROM upgrade program.
Now your phone will show its upgrade status. It will take a while (about 20 minutes or so), but afterwards you will have a clean unlocked 6515.
I did this with several locked phones (especially Vodafone) from international sources.
Above will work fine, on every PC with Active-Sync (in my case 4.5) installed.
I assume, you will have a backup, made by the SIP-backup program on one of your memory cards. You can restore it after you've upgraded your phone
SKU error,, did not work
Unlock HP 6515
Did you use the rom you download here: HP 6515 ROM upgrades ?
I did it again today, but with a soft reset of the 6515 and shutting down the upgrade program with taskmanager. Do NOT Hard-reset the device or reboot your computer! Before restarting the upgrade, the computer has to reconnect to the 6515 although it is in the bootloader mode.
My hw6515 is dead after the upgrade to 1.21
Hi guys,
I tried my cingular hw6515a to update the ROM to 1.21 unlocked ROM, it went successful but when booting it shows the initial setup and it hung on the second step "Pop-up Menus" and it doesnt show up any next button. What should i do now, please help me..
Thanks a lot in advance.
Has anyone managed to get this to work on a 6515 "A"? When I tried it I got an error message that said something like "Incorrect device SKU". I then decided to try upgrading to 1.20 which went smoothly. However, I still get the same SKU error message when trying to upgrade to 1.21. Is there a way to force it into bootloader mode? Anyone know some trick that I'm missing?
ROM Update 6515
SKU-error means wrong language.....
deivasankar said:
Hi guys,
I tried my cingular hw6515a to update the ROM to 1.21 unlocked ROM, it went successful but when booting it shows the initial setup and it hung on the second step "Pop-up Menus" and it doesnt show up any next button. What should i do now, please help me..
Thanks a lot in advance.
Click to expand...
Click to collapse
Retry the update, or downgrade to 1.20
I Think Not..............
Accordint to i know sim/Net locks r stored on different partison or ROM image of WM so when u upgrade it it dont removes sim/net locks..............
Hi there,
I've tried upgrade from 1.04 to 1.21WWE, but the upgrade process died on 12.5%.
I use the original rom upgrade from HP with ActiveSync 4.5 on XP.
I've tried many times to restart the upgrade process, but it fails on .1%.
Cann someone tell me where I can find the original 6515.bin. I've try to gogole it but with no success.
Thanks in advance.
cellsolution said:
Accordint to i know sim/Net locks r stored on different partison or ROM image of WM so when u upgrade it it dont removes sim/net locks..............
Click to expand...
Click to collapse
I've done it several times. The HP Roms contains also the RadioROM.
If you just think it cannot done... Why don't you give it try...
Arruor said:
Hi there,
I've tried upgrade from 1.04 to 1.21WWE, but the upgrade process died on 12.5%.
I use the original rom upgrade from HP with ActiveSync 4.5 on XP.
I've tried many times to restart the upgrade process, but it fails on .1%.
Cann someone tell me where I can find the original 6515.bin. I've try to gogole it but with no success.
Thanks in advance.
Click to expand...
Click to collapse
What language do you use?
For WWE you wil find v1.21, v1.20, v1.12 and v1.00 here.
SKU ERROR help pls
cellsolution said:
Accordint to i know sim/Net locks r stored on different partison or ROM image of WM so when u upgrade it it dont removes sim/net locks..............
Click to expand...
Click to collapse
So how can we solve this problem?
Unlock and language change- this is how it worked for me!
This method worked for for an iPaq hw6515 after many long nights, but may be good as well for others:
Do this only from an Windows XP OS.
Make sure you have up to date ActiveSync from Microsoft!
To Unlock,
Just reflash your iPaq with the THE SAME language from HP official support site: h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=501212&lang=en&cc=us &prodTypeId=215348&prodSeriesId=501209&taskId=1 35
Connect your PDA to the computer and check it is in state connected in ActiveSync.
Download the current language ROM from the provided link, unpack, , and follow the instructions.
This official tool will do everything for you!
When it completes (~30 minutes), your phone will be unlocked.
After that if you need to change the language, follow this instructions:
How to change the language in your iPaq:
Here is the detailed process completed, borrowed from Barr :
1. Download and extract BOTH current and desired ROM language pack from HP site to the computer. Unpack them to different folders.
2. Establishing connection with the computer, copy EnterBL.exe (from desired language ROM folder) to the mydocument folder of the PDA.
3. Run the EnterBL.exe from the PDA. (Now your PDA will go to Bootloader mode).
4. (before executing step 4, prepare for step 5 since step 5 will have to be executed right after step4). From your PC, start updating the current ROM by lunching hpRUU.exe of the current installed language of your PDA.
5. Right after step4, when it will start updating, copy all the data (*.nbf) files of desired/intendedlanguage ROM pack to the current ROM pack. (the Rradio.nbf may be skipped if the device is already unlocked).
6. At the end of copying, it might show an error message, press OK to ignore.
7. The phone will restart!
Arruor said:
Hi there,
I've tried upgrade from 1.04 to 1.21WWE, but the upgrade process died on 12.5%.
I use the original rom upgrade from HP with ActiveSync 4.5 on XP.
I've tried many times to restart the upgrade process, but it fails on .1%.
Cann someone tell me where I can find the original 6515.bin. I've try to gogole it but with no success.
Thanks in advance.
Click to expand...
Click to collapse
Same here i reflash again last night but upgrade process fails on .02%
Hello Guys,
I have updatet my PPC from Windows 2003 to Windows mobile 6.
Now i have downgradet to windows mobile 5 and my telephone (calls) dont work.
I i try to upgrade to another version (wm6) i get an error "Country-ID Error" on my PC and my Pocket PC goes off. If i take my PPC out of the Cradle, my pps returns in the Bootloader modus and "Seriell" have a red Background..
Please help me
There's a sticky thread in the "Himalaya upgrading" section of the forum that explains it:
http://forum.xda-developers.com/showthread.php?t=228852
Also you could download the ROM installer by C. Shekhar from
http://www.4shared.com/file/25643567/be7eb052/C_ShekharAKU70bR40P24_public.html
The read_this_first text file in the download gives steps for handling the error which might be easier to work with.
Hello,
HimeGetDevice... returns only:
U S B 3 2 3 . 5 0 c . 4 0 C S
what's to do?
Hey,
I have flashed this rom:
http://www.4shared.com/file/25643567...24_public.html
Now, my pps dont boot! I see the i-mate screen and nothing else... what to do???
try to flash using HIMAUPGRADEITNOID utility
Ey people, Few months ago have i some problems with my mobile phine ... and a friend of mine have tried to help me and now afther the time i have my phone back..
But when i started my phone i see online the tri-color page and a can not upgrade my ROM..
The text what i see is "Upgrade ROM code error", I have tryed for some a new ROM from panosha and the GUI of Digital Outcast, but that i can not installe the driver on my x64 system ... (when i used that driver i will be see a error in my divices manager.
I have try to copy a new RUU_Signed.nbh to my sd card, but afther there will no change and i see only the tri color page... and after restore I see the first time "No image file".
I hope that some people know how you can fix this problem and want to help me.. So as it now looks i can looking for some new phone...
NightKing said:
Ey people, Few months ago have i some problems with my mobile phine ... and a friend of mine have tried to help me and now afther the time i have my phone back..
But when i started my phone i see online the tri-color page and a can not upgrade my ROM..
The text what i see is "Upgrade ROM code error", I have tryed for some a new ROM from panosha and the GUI of Digital Outcast, but that i can not installe the driver on my x64 system ... (when i used that driver i will be see a error in my divices manager.
I have try to copy a new RUU_Signed.nbh to my sd card, but afther there will no change and i see only the tri color page... and after restore I see the first time "No image file".
I hope that some people know how you can fix this problem and want to help me.. So as it now looks i can looking for some new phone...
Click to expand...
Click to collapse
Read this thread
I am having trouble installing Windows Mobile 6.5 on a HTC Touch HD.
I have extrected all the files to a folder and then I have connected my Touch To the computer and have activated
activesync. I have then opened up the PDA Phone Rom Update Utility and followed the instructions. The HTC Touch HD gets stuck on 0% and the PDA Phone Rom Update Utility displays an error 262-the update utility has encounterd Communication problems with the device. how can i resolve this problem?
Urgent reply would be appreciate
Babar
babarjalil said:
I am having trouble installing Windows Mobile 6.5 on a HTC Touch HD.
I have extrected all the files to a folder and then I have connected my Touch To the computer and have activated
activesync. I have then opened up the PDA Phone Rom Update Utility and followed the instructions. The HTC Touch HD gets stuck on 0% and the PDA Phone Rom Update Utility displays an error 262-the update utility has encounterd Communication problems with the device. how can i resolve this problem?
Urgent reply would be appreciate
Babar
Click to expand...
Click to collapse
I think first you need to go HERE and do exactly what you need to do according to this guide.
As above, please post further queries regarding flashing in Dummies Guide thread.
Thread closed