Related
Hi,
my Terra freeze at the O2 screen. nothing happend than.
I tried many Hard Resets but without any success.
I try to install the Touch-It Rom. and it comes an Error. than the terra restart and than i only see O2 screen .-)
I have a German Terra with origianl WM6.
And Another Question - Is Wing the HTC P4350 ?? what is wing ? and what ecaxtly is ment with "RUU"?
Can anybody help me? Or can anybody tell me what to do? I need a Mobile Phone.
Many Many Thanks
Oliver
(sorry for my english - im a german guy )
wing == http://wiki.xda-developers.com/index.php?pagename=HTC_Atlas
ruu == ROM Update Utility
thank you very much for the fast reply - but can anybody tell me what to do now with my bricked phone??
i read that there is no RUU for p4350 with WM6 - i need fast help pls.
is there maybe a chance to get another image/rom/ruu (what ever) on the phone?
and how to do that ?
haanebambel said:
thank you very much for the fast reply - but can anybody tell me what to do now with my bricked phone??
i read that there is no RUU for p4350 with WM6 - i need fast help pls.
is there maybe a chance to get another image/rom/ruu (what ever) on the phone?
and how to do that ?
Click to expand...
Click to collapse
There are RUU's for all Herald except the Terra, if I remember correctly.
And there is no chance to install another ROM?
the bootloader works fine -
there i see
IPL 4.11.0002
SPL 4.11.0000
USB connection posibble.
I tried a rom i found in web - but at 2% the programm tells me
error 294- vendor id.
:-(((((
What can i do that the phone is workin again?
Your phone is CID to the Terra's factory ROM. You have to get a Terra RUU from your manufacturer. But they won't like that if they find out you were trying to flash a third party ROM into their device.
sorry to say
but 1000000 times mentioned
there is NOOOOOOOO RUU for terra.
send it to service
But what went wrong?
The SPL is ok, so he could use Hard-SPL and flash his XDA with the Rom in NBH-format from Itje...
sammy__s said:
But what went wrong?
The SPL is ok, so he could use Hard-SPL and flash his XDA with the Rom in NBH-format from Itje...
Click to expand...
Click to collapse
but not AFTER he tried to flash a WingROM....
the very first had to be flashing HArd-SPL - but he didn´t
Sorry.
i have a htc p4350 dead by flashing by wrong rom
i try now to repair it using rom found in xda-developers but it show me
ERROR [300] : INVALID UPDATE TOOL
This error message will appear when you use the incorrect RUU version to upgrade.
any solution to repair
use the correct RUU version?
but seriously, we need more details, especially about your phone (HTC P4350 or wing/terra/you get the idea? IPL/SPL). also, what rom were you trying to flash?
here information about it
htc : hera100
ipl 1.08.0001
spl 1.08.0001
this is another herald bricked case
if u perform a search, you'll find "there's no solution"
if u try to ask mods, they dont give you answer or solution
so.. apparently there's no solution!!
tramuyo said:
this is another herald bricked case
if u perform a search, you'll find "there's no solution"
if u try to ask mods, they dont give you answer or solution
so.. apparently there's no solution!!
Click to expand...
Click to collapse
are u sure ??
well.. try to contact Olipro.. I think he can help you
for a $$$
what rom were you trying to flash? is it a custom rom or an official RUU rom? RUUs can be flashed with an SPL lower than 4 where as customroms cannot and must not.
i have tha same proplem please can any one help us
tramuyo said:
well.. try to contact Olipro.. I think he can help you
for a $$$
Click to expand...
Click to collapse
Hello Tramuyo,
everytime I open my desk drawer I see my Terra-Brick, am I getting paranoid about this pain or does it seem to me that you know something?
I was checking your last posts and it seems to me that you know a lot about this whole Cid-Lock/ Brick thing. Am I right, that with this Tool that maybe exists it should be possible to recover any device?
And, btw sorry to bother you with those damn Terras....
well, i just doin research. Im like yours
playing with htc herald and tapping keyboard with Invalid Certificate thingy and that stuff
Ive talked with Olipro and he says that *maybe* he have a solution for that
tramuyo said:
well, i just doin research. Im like yours
playing with htc herald and tapping keyboard with Invalid Certificate thingy and that stuff
Ive talked with Olipro and he says that *maybe* he have a solution for that
Click to expand...
Click to collapse
realy i have this proplem and need soluation for this
yes me too...
always invalid....
how to make my hera 100 alive again ??
please give me solution... where is the expert ??
helpppppppppppp
i have same problem
and i do evry thing here in forum but no lock
what we can do
to slove this problem
Contact Olipro for more information... Herald HAVES recovery!!!!
I Send To Him But Still No Luck
update from sd card
your phone has to be hard unlocked.
what can i do i have the same proplem and how to make hard unlock
search gold card !
and good luck!
Hi everyone,
I try update my windows 6.0 to 6.5 yesterday, i fallow all steps and during the update, when the update is in 16% a error happen. I try user the recovery but doesn't work, and now when i start my phone, show the tri-color screen and stay.
What i can do to fix this?
Important remember, i need to use the jump spl 1.93 to get out of the white screen for update the windows.
Thanks all.
Charlles said:
Hi everyone,
I try update my windows 6.0 to 6.5 yesterday, i fallow all steps and during the update, when the update is in 16% a error happen. I try user the recovery but doesn't work, and now when i start my phone, show the tri-color screen and stay.
What i can do to fix this?
Important remember, i need to use the jump spl 1.93 to get out of the white screen for update the windows.
Thanks all.
Click to expand...
Click to collapse
Reflash your original carrier rom. from the tri-color screen.
Since WM 6.5 has not and will not be released for the Kaiser, I am assuming that you are trying to flash a custom 6.5 rom, and have followed all the steps described here:
http://forum.xda-developers.com/showthread.php?t=433835
I try install this ROM: http://forum.xda-developers.com/showthread.php?t=397121
Sorry, my english is very bad.
"Reflash your original carrier rom. from the tri-color screen." What do you mean?
Thanks
Charlles said:
I try install this ROM: http://forum.xda-developers.com/showthread.php?t=397121
Sorry, my english is very bad.
"Reflash your original carrier rom. from the tri-color screen." What do you mean?
Thanks
Click to expand...
Click to collapse
Did you follow all the steps in the link I gave you above before you tried to flash the Hyperdragon rom ?
What I mean is to find the original rom that came with your phone, in the Kaiser Wiki and reflash that on to your phone.
How can i know what is my original rom?
I remember, the visual is like this: http://pdadb.net/img/htc_tytn_ii.jpg
thanks
Charlles said:
How can i know what is my original rom?
I remember, the visual is like this: http://pdadb.net/img/htc_tytn_ii.jpg
thanks
Click to expand...
Click to collapse
Where and when did you get your phone and who is the carrier ?
I from Brazil, the carrier is CLARO, i buy of a friend in this month, i have no idea when he buy.
In the box of the phone, is write: "Windows Mobile 6 Professional"
have another way to fix this?
What is the built of your tytn II i.e. its HTC TYTN II or AT&T Tilt ???
if its of HTC then try to update the latest rom 6.0 or 6.1 with radio (as both are official) of HTC available on kaiser wiki page and vice versa for AT&T Tilt.
Hope it'll sort out ur problem.
Cheers
kashifmehmood said:
what is the built of your tytn ii i.e. Its htc tytn ii or at&t tilt ???
If its of htc then try to update the latest rom 6.0 or 6.1 with radio (as both are official) of htc available on kaiser wiki page and vice versa for at&t tilt.
Hope it'll sort out ur problem.
Cheers
Click to expand...
Click to collapse
htc tytn ii
A try a lot, and usualy the errors bellow happen:
ERROR [294] : INVALID VENDER ID
ERROR [262] : UPDATE ERROR
If help, what show in the screen is:
RUUNBH
KAIS120
SPL-1.94.0000
CPLD-8
USB
You need other information?
Thanks
Fellas,
I read in another topics, and i think this error happen because i don't have the HardSPL installed on my HTC TyTN II.
Now the question, how i can install HardSPL with my phone frozen on the tri color screen?
How can i know if HardSPL is install on my phone?
Thanks.
hi,
i got oner htc hd i hard spl it and the upgrade it to windows 6.5 all was working fine but it hangs a lot the i flashed it with windows 6.1 rom then the problem came was that all is working fine but i am unable to turn phone on to acess network on phone then i updated it ti the same rom i firstly used the problem was same then i update its radio then also problem was not solved then i update it other 6.5 rom but the problem is same phone doesnt turn on so that i cant acess network plz help me its very urgent for me
Are you sure the hspl update was successful? What spl version is currently showing on your device?
yes hspl was successful
manbir said:
yes hspl was successful
Click to expand...
Click to collapse
What spl is showing?
manbir said:
hi,
i got oner htc hd i hard spl it and the upgrade it to windows 6.5 all was working fine but it hangs a lot the i flashed it with windows 6.1 rom then the problem came was that all is working fine but i am unable to turn phone on to acess network on phone then i updated it ti the same rom i firstly used the problem was same then i update its radio then also problem was not solved then i update it other 6.5 rom but the problem is same phone doesnt turn on so that i cant acess network plz help me its very urgent for me
Click to expand...
Click to collapse
Perhaps you could give a bit more information about your issue. Interesting would be:
do you get the window to enter your pin?
and do you get any error message?
Matthes42 said:
Perhaps you could give a bit more information about your issue. Interesting would be:
do you get the window to enter your pin?
and do you get any error message?
Click to expand...
Click to collapse
i dont get any error and it is also not asking for any pin
its hspl is 1.56 olinex
Ok, so you have the right spl, so that is not the problem. To understand you, you say that you can not activate the phone? Does the phone stay in flight mode? If you go to Settings (Manila tab)\Wireless Controls and turn the Phone slider on, does it turn itself off again?
You can try to run the setup again. Go to Start\Settings (All Settings)\Connections\Connection Setup and make sure your Country and Operator are correct and press Ok to setup.
ClydeB1 said:
Ok, so you have the right spl, so that is not the problem. To understand you, you say that you can not activate the phone? Does the phone stay in flight mode? If you go to Settings (Manila tab)\Wireless Controls and turn the Phone slider on, does it turn itself off again?
You can try to run the setup again. Go to Start\Settings (All Settings)\Connections\Connection Setup and make sure your Country and Operator are correct and press Ok to setup.
Click to expand...
Click to collapse
am unable to turn the phone on rest all settings of country operator also ok
Is your device perhaps not SIM locked? What rom did you have originally? Have you tried to reflash to that original version and see if the problem is resolved.
When you first flashed to the 6.5 rom did the phone work then? I know you say you had lots of freezes, but before that did the phone work on the 6.5 rom?
sounds to me like a providerlocked phone
as he stated in his first post that he also flashed back 6.1
miniterror said:
sounds to me like a providerlocked phone
as he stated in his first post that he also flashed back 6.1
Click to expand...
Click to collapse
yes i flashed back to 6.1 but phone is not provide locked its phone is not turning on and i have cheked that all sims were working fine
miniterror said:
sounds to me like a providerlocked phone
as he stated in his first post that he also flashed back 6.1
Click to expand...
Click to collapse
manbir said:
yes i flashed back to 6.1 but phone is not provide locked its phone is not turning on and i have cheked that all sims were working fine
Click to expand...
Click to collapse
Thanks I saw that you did try a 6.1 rom, but I was asking if you tried the initial original 6.1 rom. You may have tried another 6.1 rom but not the original rom that was on the phone before you started flashing.
To my other questions then, did the phone initially work when you first flashed to the 6.5 rom? If after all of this and it was initially working on the 6.5 rom, you may have a hardware problem and may need to flash back to the original rom and take it back to HTC for a service.
ClydeB1 said:
Thanks I saw that you did try a 6.1 rom, but I was asking if you tried the initial original 6.1 rom. You may have tried another 6.1 rom but not the original rom that was on the phone before you started flashing.
To my other questions then, did the phone initially work when you first flashed to the 6.5 rom? If after all of this and it was initially working on the 6.5 rom, you may have a hardware problem and may need to flash back to the original rom and take it back to HTC for a service.
Click to expand...
Click to collapse
yes the phone was working fine when i firstly flashed to 6.5 rom and its not hardware how can i know which was original rom now at this condition???
manbir said:
yes the phone was working fine when i firstly flashed to 6.5 rom and its not hardware how can i know which was original rom now at this condition???
Click to expand...
Click to collapse
You can try going to the HTC website for your county and look to see if there is a rom upgrade available. If so you can enter your Serial Number to see if you can access it for download. Alternatively you can look for a stock rom here Try and find a friend near you with the HD and check their version.
Same problem here .....my wifi cant connect to anything..when im tryin to turn it on nothings happen and cant acces to web browsing..nothing works...i have flahed 4 roms till now and all the rom had the same problem...i ve flashed miris rom NRG rom Dutty rom and maryone....i dont know what to do....till before a week worked like a charm...but now it is still dead....
If your wi-fi was working and then on the same rom has suddenly stopped working that probably sounds like a hardware issue. You may need to flash back to rom and return the device for a service.
are you serious??cause in my country i leave in greece salonica..and the htc center is in athens and must send the device there and they told me to wait about one month or two to get it back....no way...!!!!but it is very strange...when i had miris rom it worked like a charm..after trying to flash a new rom to nrg then wifi stopped workin...tryed to flash another rom like duttys and maryone and still the same....why am i so unlucky???is there any solution???maybe is that any problem with rom?or misiing some file?
anyway thanks for reply....have a nice and a happy new year...god bless you!!
pm...sorry for my english...
edangel said:
are you serious??cause in my country i leave in greece salonica..and the htc center is in athens and must send the device there and they told me to wait about one month or two to get it back....no way...!!!!but it is very strange...when i had miris rom it worked like a charm..after trying to flash a new rom to nrg then wifi stopped workin...tryed to flash another rom like duttys and maryone and still the same....why am i so unlucky???is there any solution???maybe is that any problem with rom?or misiing some file?
anyway thanks for reply....have a nice and a happy new year...god bless you!!
pm...sorry for my english...
Click to expand...
Click to collapse
You can always try going back to the miri rom you were using, or to the original rom that was on the phone. If wi-fi still does not work then it sounds like it is a hardware issue and there is no other way around it that I can see but to take it in for a service, unless you think you can replace the part yourself. Is there no cell phone repair services in your location, although you may need to pay to have it repaired then as it will not be under HTC warranty then if you are prepared to take that chance. Sometimes these parts just break, it doesn't happen all the time, but hey even multi-million $ F1 cars break down.
ClydeB1 said:
You can always try going back to the miri rom you were using, or to the original rom that was on the phone. If wi-fi still does not work then it sounds like it is a hardware issue and there is no other way around it that I can see but to take it in for a service, unless you think you can replace the part yourself. Is there no cell phone repair services in your location, although you may need to pay to have it repaired then as it will not be under HTC warranty then if you are prepared to take that chance. Sometimes these parts just break, it doesn't happen all the time, but hey even multi-million $ F1 cars break down.
Click to expand...
Click to collapse
SO...FOR MANY HOURS TO FIND SOMETHING I MADE IT...THE SOLUTION IS UNDER START SETTINGS CONNECTION ADVANCED NETWORK AND THEN I JUST ENABLE FROM HSDPA/HSUPA TO ONLY HSDPA AND NOW ITS WORKING...
AS I THOUGHT THIS SETTINGS DEPENDS OF WHAT MODEM ROUTER YOU HAVE...JUST WORKING FINE NOW.....
SO EVEN MULTI MILLION F1 CAN BE FIXED UP......if you are rich and got the money...hahahaha
SO THANKS ANYWAY!!!!!!!!I AM GLAD FOR TRYING TO HELP ME.....
edangel said:
SO...FOR MANY HOURS TO FIND SOMETHING I MADE IT...THE SOLUTION IS UNDER START SETTINGS CONNECTION ADVANCED NETWORK AND THEN I JUST ENABLE FROM HSDPA/HSUPA TO ONLY HSDPA AND NOW ITS WORKING...
AS I THOUGHT THIS SETTINGS DEPENDS OF WHAT MODEM ROUTER YOU HAVE...JUST WORKING FINE NOW.....
SO EVEN MULTI MILLION F1 CAN BE FIXED UP......if you are rich and got the money...hahahaha
SO THANKS ANYWAY!!!!!!!!I AM GLAD FOR TRYING TO HELP ME.....
Click to expand...
Click to collapse
Hey, I'm glad you got it sorted. I'll remember to add that additional check to my little arsenal of things for troubleshooting. Thanks for the feedback.
hi friends
my X1 freeze on sony ericsson logo.i tried soft and hard reset several times but nothing.i upgraded rom with shipped rom in SDcard method(because x1 can not connect to a PC via activesync or wmdc) and it showed update success message finally but after turn it on again
it freeze on sony logo again and not to boot in WM.pls guide me what's the problem ?
BrianXP7 said:
Is the ROM image broken? Did you accidentally perform a task 42 at some point? What ROM did you install? Any other information would help.
Click to expand...
Click to collapse
Dear BrianXP7
rom was orginal R2(APP_SW_X1i_GENERIC_UK_CDF1215-1832_KOV_R2AA010)I used it random!but it was update success message.I dont
know what was orginal rom on my x1.it was only rom that x1 could loaded and update itself.what is task 42 ? but no i did not any task during update process. sorry i dont know about this and how does it do.thanks for ur help
BrianXP7 said:
Oops, my mistake. I meant task 29. It basically formats everything but the bootloader and SD card in your device. Are you sure that specific ROM is compatible with your device? It's for the UK model. Where did you get it and maybe a link to it? Try using HashCalc or HashTab to check the MD5SUM if you downloaded the image correctly.
Click to expand...
Click to collapse
X1 can not connect to PC so task29 is unusable . I update with R3 (APP-SW_X1_GENERIC_UK_1213-6450_R3AA010__KOVS) now and it ended with success message but again NOTHING it freeze on sony logo again!
I do not know what was orginal rom install on this x1.I confuse ! which rom is correct for this x1 and is problem ROM or another thing ?
sorry for bad english
I bouth x1 in Iran.I don't know from where x1 was ship to Iran but i hear there is a ROM for middle asia special one . i searched on net for it but nothing find.
i know this x1 was not shipped from UK .
thanks for reply BrianXP7
anybody help ??
BrianXP7 said:
I guess try flashing a different ROM?
Click to expand...
Click to collapse
Dear BrianXP7
i updated each three ship ROMs
APP_SW_X1i_GENERIC_UK_CDF1215-1832_KOV_R1AA017 and R2 and R3
(the only ROMs this x1 can loading and update with success) but nothing!
Is it hardware problem ?
BrianXP7 said:
What about a custom ROM?
Click to expand...
Click to collapse
where is custom rom download link ?
all of custom roms freeze on loading screen and could not install only ship roms updated with success messege
BrianXP7 said:
I ran out of ideas.
Click to expand...
Click to collapse
It could be SPL-related problem.
TS, what SPL have you got?
bootloader screen shown :
kovs110
SPL0.72.0000
Micro P1-787
Micro P2-707
i think spl is orginal that x1 worked before,i am not sure.
Oh, those little ass-handy bastards..
Batman1351 said:
bootloader screen shown :
kovs110
SPL0.72.0000
Micro P1-787
Micro P2-707
i think spl is orginal that x1 worked before,i am not sure.
Click to expand...
Click to collapse
"kovs100" tells me it is a really bad idea NOT to flash OliNex SPL (http://forum.xda-developers.com/showthread.php?t=431218) before ROM changing!
You should really go and read some tutorials!
just want up these thread, i had a same problem with my xperia x1 as same to the TS.
anyone from our expert in xperia x1 programing, can give a nice solution?