Database Develop

Help , my Tofclock WM6 rom has jammed

Hi,
I recently flashed upto WM6 Tofclock and everything was fine for a few weeks. Yesterday when I stuck the Himi on its cradle , it failed to sync and I noticed the PDA was stuck on its Tofclock WM6 splash screen.
I have tried to soft and hard reset and no matter what I do it jams at the same Tofclock splash screen.
Please advise what I should do ???

Hard reset your pda.
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts

[Q] help - hard reset not working

hi i need help to do hard reset on my htc pure.
when i push 2 bottem + power its geting me to a screen that syed :"step 3 error while updating : file operate : File does not exist."
and it stuck !
can some one help me ?
is there any file that have to be in the sd card thet it looking for ?
please help

Make sure you do not have an .nbh file on your sd card
To perform a hard reset
1. With the device turned off, press and hold both the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
2. Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see this message on the screen:
"This operation will delete all your personal data, and reset all settings to manufacturer default. Press VolUp to restore manufacturer default, or press other keys to cancel."
3. Release the VOLUME UP and VOLUME DOWN buttons.
4. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.

hi
i allready have done but still the same display i even toke out the SD card same display.

Are you on the stock ROM?

hi
what r u mean ? i try to hard reset but it couldnt activate it stop and i didnt got the display that u wrote .

zzozozo said:
what r u mean ? i try to hard reset but it couldnt activate it stop and i didnt got the display that u wrote .
Click to expand...
Click to collapse
i did what u wrote until stage 2 and i didnt got the display u wrot this is the display i got : "step 3 error while updating :
file operate : File does not exist."
and then it stuck !

[Q] Sprint tab, Low and Space message

This is after reset back to ea24. All my old info is still there after doing a factory Wipe, wipe cache. All apps crash, and Internal Device storage says only 35.95 MB free. This is with a new flash to EA24 and nothing installed.
Anyone know how else you can force the tab to reset to factory or wipe factory partition and reflash?

BTW this all started right after I updated the Dolphin browser, which did not remember my settings and started the first ran wizard everytime the Dolphin browser was opened.

This is the directions from Samsung Support, but the first step does not take me to any recovery screen. It turns the tab on and then back off if you hold it for 15 seconds.
Victoria: Power off the device.
Victoria: Hold the Vol Down Key + Vol Up Key + Power Key for 15 seconds then release.
Victoria: When the recovery screen comes up, use the volume up key and volume down key to navigate through the selections and the power key to select item.
Victoria: Select Delete all user data to recover the device.
Victoria: To confirm, scroll down and select Yes – delete all user data.
Victoria: The device reboots and again displays the recovery screen.
Victoria: Select Reboot system to restart the handset again.

Those steps should have indeed wiped out any and all settings, apps etc, so if they're still there after doing the wipe (might try doing the process 3x.. galaxy s devices seem to have better luck 3x.. and no you don't have to reboot into recovery, just do the wipe 3x in recovery.) then you might have a messed up device...

After attempting the steps above a few more times now the tab is locked in the Computer and Phone icon and no way to boot in to any other mode. Time to contact Samsung for a return?

Are u able to get into download mode maybe reflash to origional firware and see if it does the same thing

ME572c stuck on settings screen

Hello everybody.
i have updated my tablet and stuck now on the welcome screen page.
I have installed this version : ASUS MeMO Pad (ME572C)Software Image Version: V12.14.1.12 For WW SKU only* from this page http://www.asus.com/de/Tablets/ASUS_MeMO_Pad_7_ME572C/HelpDesk_Download/
i have fellowed this instruction here :
ME572c recovery
Today I did it : I changed a setting I shouldn't and my Memo became unusable (boot loop ?); even factory reset didn't do the trick...
So now I can make a How-to for recovery and rooting ;o)
Recovery (stock firmware) :
==> You'll need a MicroSD card on wich you have to put a file with you PC (or another device)
Prepare SD :
- Get update file from Asus (mine was UL-K007-WW-11.8.3.30-user.zip for 8.3.30 version and WW device)
- Copy file to FAT formatted MicroSD and rename it "MOFD_SDUPDATE.zip"
Go to droidboot mode :
- turn the K007 on with "Power" and "Volume UP" keys and keep'em pressed
- release "Power" when the screen turns on
- then release "Vol UP" a few second later when the Asus logo disappears
Flash :
- insert MicroSD into K007 slot
- Select "SD Download" using "Vol DOWN" key then confirm with "Power"
==> It will flash the device with the original Asus firmware and reboot to display the first launch wizard...
Not sent from my K007...
I found the instructions here: http://forum.xda-developers.com/memo-pad-7/general/me572c-root-debloat-t2992131
Now everytime i boot with power button + volume up i got this screen (picture one and two)
When i try to boot into recovery, the tablet always try to update the system. When an sd card is insert with FW V12.14.1.12 it install it, but nothing changed. When no sd card is insert, a failure come (picture 3)
Everytime after the fifth settings page ( the time settings picture 4) the app go back to first page (picture 5)
I can not get out off the welcome app. even sliding up from the bottom of the screen. Or slide from the top i see no bottoms and no settings

opps. sorry. bad suggestion and deleted

If you see picture 3, just hold power button and press volume-up button. Now you are into the recovery menu and you can do " wipe data/factory reset ".

HU can't start after one change in the hidden Factory Settings menu

I've changed the settings in the "factory settings" hidden menu.
Here was some "power" option in the "other" section. Power option default is "on" i was changed to "off" and reboot HU..
My HU cant' start, only buttons has got light. When i made hard reset - reset button + power button - HU go into recovery mode. In the recovery mode i can wipe / delete cache and data but HU still can't boot.
My HU: EONON GA2171S
HELP!

mikemat.pl said:
I've changed the settings in the "factory settings" hidden menu.
Here was some "power" option in the "other" section. Power option default is "on" i was changed to "off" and reboot HU..
My HU cant' start, only buttons has got light. When i made hard reset - reset button + power button - HU go into recovery mode. In the recovery mode i can wipe / delete cache and data but HU still can't boot.
My HU: EONON GA2171S
HELP!
Click to expand...
Click to collapse
I have found a solution.
Description below for anybody who got problem like me:
HU can't start, because in the config file there is mistaken option with power service turned off.
You need to find a MCU file (DMCU.IMG) and MCU CONFIG (DMCU.CFG) file and make an HU update in the recovery. mode.
Put these files on the SD card and flash MCU.
Link to the MCU CONFIG file:
https://forum.xda-developers.com/and...-mcus-t3624724
Link do the MCU file:
https://forum.xda-developers.com/and...essor-t3834657
REMEMBER - YOU MUST GET FILES TO YOUR HEAD UNIT - but you can try different, your HU is dead now anyway...