Database Develop

help but i have a dumb question..

ok i was trying to upgrade but i used the wrong upgrade for the wrong phone and it told me on the computer screen and now the sx66 stays on usb when connected to the use it says USB on screen and v2.06 on the bottom, and when i unplug it form the cradel it says serial with the same at the botm how do i make it reset i tried the pwr and reset at the same...
any help apprecieated..

I guess you have to upgradewith a correct ROM.

..
can u or somone please tell or show me where a correct ROM would be... i have looked and all i find are ones that give me errors..(wrong country code,wrong device.yaddy yaddy yah) please i need to fix this asap, im in the us using a Cingular SX66...please any guidence would help.
thanks in advance.

all these errors are described in this forum, along with their solutions!
search'n'find instead of ask'n'wait!

i was searching but i havent found much that answeres my problems sorry to bother you.. im just panicing...thanks again

i was searching but i havent found much that answeres my problems sorry to bother you.. im just panicing...thanks again

fixed thanks for everyones help...!!!

Somebody help me!!! Upgarde

I've instaled a windows mobile 5 rom, a strange rom that put my Qtek 9090 very, very slow. Unappy whith that, i made a search here in XDA-Developers and my conclusion was that the best Rom is the "Helmi_BA_WM2k5_AKU3.5_v1.4.CF2 R2 by baniaczek".
So i download it and started the upgrading pressing "MaUpgradeUt_noID" icon that opens a sreen with Qtek S100. clicked Next and after the next sreen an error ocured » ERROR 101: Conection Error«
My phone is correctly conected and i don't know what to do.
Sugestions???

Look at my signature, and first read before asking questions that are answered at least 1000 times
but i will provide you with short explaination
1. put your device in bootloader mode
2. place it to cradle
3. run maupgradeut_noid and follow the onscreen instructions
4. perform wm5 hard reset

xplode said:
Look at my signature, and first read before asking questions that are answered at least 1000 times
but i will provide you with short explaination
1. put your device in bootloader mode
2. place it to cradle
3. run maupgradeut_noid and follow the onscreen instructions
4. perform wm5 hard reset
Click to expand...
Click to collapse
And remove memory card

Contacts???
Thank you for the help, i've done it and the rom is very fast and good looking, but, i can´t access to contacts. wen i press contacts botton the menu appears and quickly desapears. I´ve tried to sync my contacts, and a memory problem ocours.

please post in the specific rom thread

Thank you all for the help, but i figure it out what is happening.
I was no doing the setoperator thing. When i do that the rom was detected.

same
nunocapela said:
Thank you for the help, i've done it and the rom is very fast and good looking, but, i can´t access to contacts. wen i press contacts botton the menu appears and quickly desapears. I´ve tried to sync my contacts, and a memory problem ocours.
Click to expand...
Click to collapse
I have the same trouble anyone know why and how to fix it?

HARDSPL

I Have Read And Check All The Thread Given By The Forum Team Menber.i Have Problem Installing Hardspl For This Version
Spl-1.56.0000.
Radio Version 1.56.110.4
Any Idear

Any further clarification?
What have you done?
What is the exact problem?
...

I Downloaded Hardspl V7 Extract It And I Tried To Install It As I Follow The Instruction It Will Reboot It And Later Show Error 260 Update Error I'm Using Windows Xp And My Active Sycn Is Ok.this Wht I Have Done So Far.

I just had someone with the very same problem.
I'm glad you used the 'search' function, but sometimes you need follow a more logical way to answering your question. If you had checked the 'Kaiser wiki' and the sticky in the 'Kaiser ROM development' section you would have found the right app.
The HardSPL you found isn't the one intended for the Kaiser. HardSPL for the Kaiser is still v1.
More info can be found here:
http://forum.xda-developers.com/showthread.php?t=334679
Good luck installing HardSPL!

thank u very much for your quick response.actually it is locked to t mobile after searching i found this method given by the team.
http://forum.xda-developers.com/showthread.php?t=361039
this my 1st kaiser to unlock

If you had checked the 'Kaiser wiki' and the sticky
Click to expand...
Click to collapse
a little rym

bambo clan said:
thank u very much for your quick response.actually it is locked to t mobile after searching i found this method given by the team.
http://forum.xda-developers.com/showthread.php?t=361039
this my 1st kaiser to unlock
Click to expand...
Click to collapse
Might I offer a suggestion. I suggest that you use this method. It also sim unlocks the device as well. If you will check towards the end of the thread Alltheway has packaged together everything you need and has already had a positive report from someone that used the files. Just follow the directions exactly and don't vary. Good luck.
http://forum.xda-developers.com/showthread.php?t=361236

i tried to install as follow when it ask me to continue with d process it only display whit screen it stays like that 4long.according to the software i must stay 4 it to boot in bootloader mode but mine only stays at white display.or am i not getting it right?atlist b4 i proceed with others this must be installed 1st or any other alternative?
The HardSPL you found isn't the one intended for the Kaiser. HardSPL for the Kaiser is still v1.
More info can be found here:
http://forum.xda-developers.com/showthread.php?t=334679
Good luck installing HardSPL![/QUOTE]

Sorry if I seem to be nagging all the time, but you should have read the wiki and the sticky I was talking about.
Wiki: http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser
Sticky: http://forum.xda-developers.com/showthread.php?t=369282
There you would have found the following thread:
http://forum.xda-developers.com/showthread.php?t=354061
This will help you install HardSPL. If you have installed HardSPL according to the thread, you should follow the thread provided by P1Tater:
http://forum.xda-developers.com/showthread.php?t=361236
Good luck!

HURRAY IT WAS EASY AS ANYTHING NW I'LL CONTINUE WITH THE UNLOCKING PROCESS BY UPGRADING MY ROM.I'LL KEEP U UPDATE.
THANK U VERY MUCH DR.
This will help you install HardSPL. If you have installed HardSPL according to the thread, you should follow the thread provided by P1Tater:
Good luck![/QUOTE]

hi i'm having promblem with step2 ofr supercid the software remains white when i open it will only blink and close back.
7a. right-click activeync icon and uncheck "Allow USB connections" from Connection Settings
7b. On your PC go into the "step2" directory and run "kaiser-supercid.exe". If all went well you will see the unlockcode on your monitor and your Kaiser is being restarted automatically.
7c. right-click activeync icon and check "Allow USB connections" from Connection Settings
pl's hw can i go abt this step2 is not working.

hey u've bn right so far just unckeck connection setting 1st means unmark ok.and u'll get ur result.
thank to the team

Is there a complete solution for those stuck at bootloader for the kaiser?

I did every searching i could but it seems that mtty utility is the only solution for those stuck at bootloader i already know how to use the kaiser with the mtty utility but it's totally dependent on the program. Please if there's a way for it to boot by itself then that would be a huge help. Please post any complete solution re: this problem.

Look up the name GSLEON3. That's about the only definitive answer I can give you.

any updates on a universal solution for people stuck at bootloader besides using mtty to type "boot"? (i PMed GSLEON3, but no response yet...)

prikster said:
I did every searching i could but it seems that mtty utility is the only solution for those stuck at bootloader i already know how to use the kaiser with the mtty utility but it's totally dependent on the program. Please if there's a way for it to boot by itself then that would be a huge help. Please post any complete solution re: this problem.
Click to expand...
Click to collapse
This looks like a really interesting thread...
http://forum.xda-developers.com/showthread.php?t=393337
Bill

for those who are planning on trying this, i'm currently stuck at step 6... I've been following all the directions. Just an update for now... Phone is completely black, and i can't use (it's not bricked though, since i can use mtty to connect)

Having trouble running hardspl.....frustrated

I have been up and down these threads and cannot find my answer. SO I hope someone will be able to help me.
My TP2 is connected via usb to WMDC (says connected) and when I try to run the hardspl I get this error:
Fatal Error
Please make sure Device is properly synced; Please retry after syncing the device (via Activesync or WMDC)
then I click ok
and get;
Error
If you could not get the device properly synced; then try installing this CAB on your phone: http;//hpcmonex.net/roms/enablerapinew.cab and retry in Automatic Flash mode.
I am running Vista
thank you for any help.

you said it yourself
go to Error
If you could not get the device properly synced; then try installing this CAB on your phone: http;//hpcmonex.net/roms/enablerapinew.cab and retry in Automatic Flash mode.

You need to re-post this in the HardSPL thread

thanks got it solved!
thanks got it solved

kflanagan said:
thanks got it solved
Click to expand...
Click to collapse
It might help other users if you could post both your original problem, and your solution, in the HardSPL thread

steviewevie said:
It might help other users if you could post both your original problem, and your solution, in the HardSPL thread
Click to expand...
Click to collapse
Don't worry. It's posted plenty of time already .
Answered, Closed.
Dave