Related
I have just reflashed the firmware on my UK Orange SPV M2000 after porting my mobile operator over to virgin mobile. i did this so i could remove the Operator customisations which were just taking up ram, and also to see if i could make my phone more reliable (one of my biggest bugbears is not being able to use Wifi without a soft reset) as a result i can switch on and of bluetooth and wifi at will without any errors, and i havent performed a soft reset because of a problem in 6 days (i have soft resetted after installing some programs as it was required by the prog)
I achieved by first downloading ftp://xda:[email protected]/BlueAngel/BlueAngel_Roms/BA_1.40_radio_1.20_untested_extrom.rar and removing the Radio_.nbf file and flashing that to the phone.
once that was done i did a hard reset then flashed radion rom 1.13 as described here http://wiki.xda-developers.com/index.php?pagename=BA_Radio_1.13_Upgrade
I then downloaded all the files from here ftp://ftp.xda-developers.com/BlueAn...ERK_1.4X_002/I-Mate_PDA2K_Ext_ROM_140176_WWE/ into a directory on my PC
I then deleted
Default_ImateV112.002.cab -> dont need it as i havent got an imate so dont need imate email
Default_Caller_ID_BA_AKU26_RC20.CAB -> i will explain why in a minute
Default_Fax_V2.09_WWE_0720.CAB -> havent got a need for faxes
Default_SkypeForPocketPC.CAB -> this is pants and so is skype
and then i then added cabs for the following programs prefixing them with the Default_ so they would install after hard reset
Voice command 1.5 for Phone edition -> i think every one uses this
Photo Contacts Pro v 3.01 -> This is fantastic beats the IA caller ID hands down
I then used the extrom unlocker and deleted all the files in the extended rom and then copied my downloaded files into it. the then locked and hid the extended rom again and then performed a hard reset
once that was done i added in the Virgin GPRS and MMS settings (If anyone wants help with this part for virgin settings let me know as i am working on creating a CAB file with these settings) and renamed device and added owner information.
There are two problems now, the first i can fix, the camera raises the backlight to full and then keeps it that way. i just deleted camera.exe from the windows directory and then replaced it with the camera app that was originally on the device (make a backup of this file b4 you start)
The only problem that is left is a problem that happened with WMP9 and WMP10 if music is playing and you close WMP then your device loses all sound. i dont know of a workaround for this, but i make sure i pause any music before i close the app, not a big thing really
I then loaded on these apps mainly into the storage memory except that specifically request you install them into main memory
SPB Pocket Plus 2.5
SPB weather
SPB Diary
Ewallet
Tomtom Navigator 5
Microsoft Reader
Pocket Mechanic
and last but not least my favourite game Virtual Pool Mobile v1.6
This doesnt sound like many apps but it suits my needs perfectly for the moment.
I then took a full backup onto SD........
and viola one ultra stable Orange SPV M2000
i hope it works for you too
I would do what i did when installing apps and install one at a time and test especially task managers and today screens as these use up driver memory, this is where the problem with the WIFI and bluetooth starts
and in case i dont see you good afternoon and good evening and goodnight (watched the trueman show again! :roll: )
Interesting and well detailed,
I then used the extrom unlocker and deleted all the files in the extended rom and then copied my downloaded files into it. the then locked and hid the extended rom again and then performed a hard reset
Click to expand...
Click to collapse
Can you elaborate on the above please
fuzzy,
Wonder if you can attach the camera.exe file here? TIA!
Can you elaborate on the above please
Click to expand...
Click to collapse
What i mean is i run the extended rom unlocker tools on the device by selecting unhide & unlock and then through activestink browse to the /extended rom folder and then delete the files and then copy the extended rom files from the pc and put in thier place.
i hope that clarifies it for you
and yes i can attch the file for download, but its on my other comp and because of a failed raid array i havent replaced yet it takes 20 mins to boot, so i will do it tommorow
Thanks, fuzzy. Looking forward to that
fuzzy,
Are you able to extract that exe file yet ?
Nvm, fuzzy.
Found the camera.exe HERE.
Hi Fuzzy,
Where did you get the cabs from for:
Voice command 1.5 for Phone edition ->
Photo Contacts Pro v 3.01 ->
Cheers
Yohanson [/quote]
i got Voice command 1.5 with IRC on #pocketwarez on EFNET servers
and as for photo contacts i couldn't get it free so i ended up buying it (first pocketpc software i have bought ever, and to be blunt it was worth it for something that is used every time you recieve a call)
I have also incresed the number of programs by upgrading to latest versions of SPB programs and also added SPB time and SPB weather and i still have no problems with Wifi. it starts first time every time.
I have just bought 5 more of these phones but O2 XDA IIs so i will reflash these the same and then flog on ebay.
every one else who has one of these phones is jelous because it has been reliable as a rock since i did this, and i have still not experieced any problems since the flash, and i have not performed one soft reset because of a problem. i know a lot of you wont believe it but its true it has been rock solid for me. so i will test the same procedure on the five phones when get them and see if there are any differences
Great stuff!
I did something a little similar here.
I took the latest firmware and Extended firmware.
I then went through it and deleted everything I don't need.
Splash Screen, Clearvue stuff, Cingular settings, album, etc etc etc.. Although these would be neat programs... let's be honest... when it comes to the Blue Angel, less is more.
So right now, I'm pretty stable.
I don't put anything in the Protected ROM. I think a lot of apps don't like it.
We'll see how this goes!
Mike
Since I do not want to hard reset - what are the files that I need to remove in order to completely uninstall IA Caller ID ? - it does not show up on my installed apps to remove so I need to do it manually - TIA
AdmiralAK said:
Since I do not want to hard reset - what are the files that I need to remove in order to completely uninstall IA Caller ID ?
Click to expand...
Click to collapse
I havent got a clue of all the files that it uses but i imagine if you look in the windows\startup directory you will see a shortcut to start the program delete it and it wont run, but dont hold me to it as i havent got it installed to check what the shortcut is
Hi,
:idea:
I'd be interested in everyone's comments re the slowdown caused by adding programs, and I guess others would too.
Part of it is normal caused by eating up the available memory, both storage (and ram?)
However I have found that some applications do not seem to work well on the XDA2i, even though they do actually work. The problem is that this only comes to light after a while, after you've actually shelled out the money for a product that seems fine.
I list below products that I have found work on my XDA2i and those that seem to irritate the XDA2i so that it gradually gets worse and needs a hard reset.
I have tried defragmenting, and believe that Pocket Mechanic works fine a few times then things grind to a halt.
I am not an expert, and obviously cannot prove that the products are faulty, so take what I list 'with a pinch of salt' - but it might be that others might add others or agree/disagree with my findings, and might be careful about thoughily testing before purchase.
1-Calc 2.3.1 seems fine
BIBLE WITH YOU for Pocket PC- GMPSoft seems fine.
Journal Bar seems fine
POCKET ARTIST seems fine
Pocket Controller- Professional 5.04 seems fine
POCKET DVD WIZARD seems fine
Pocket Streamer Pro seems fine
PocketBible - NIV Version by Laridian seems fine
RESCO EXPLORER 2005 seems fine
TCPMP (The Core Media Player) (freeware) seems fine
MTUX RingToneX - Ringtone Coloring 2.1 not sure about this
DVD to Pocket PC for me was problematic after version 2
1-Pass - Revolutionary Security App not sure
eXPerience (Windows XP Style Interface) had this running ok but slow on XDA2 but not tested on XDA2i
File Transfer Anywhere(PPC Anywhere) 3.01. Tried trial period but didn't like it.
iLOCK e-wallet password manager 1.0.1 had this running ok but slow on XDA2 but not tested on XDA2i
POCKET TV ENTERPRISE worked fine up to version 1.2 on my XDA2i
Pocket Mechanic. Not sure. I bought it to defrag XDA2i and storage. Found that after a few times the system slows down and needs to be restored.
TV Remote commander. Not sure about the usefulness because Very limited range.
---
andromeda9,
try using Tweaks2K2.NET. quite amazing tweaking software. can speed up your display. i can feel the speed different.....
Tweaks2k2net
Thanks Clustered.
I've downloaded the trial. What settings worked best for you?
Under Video, I tick the Speed Up Display.
Thanks the display is quicker...
Thanks for the tip...
The display is quicker.
It seems overkill to go for Tweaks2K2 but just for one display fix, and the Date/time on the bar (I love it!) so is there anything else you might recommend?
Thanks
just try yourself....maybe you will like others.....
Ok.
Appreciate your help.
I removed O2 Active and the XDA2i is about 10 times quicker and more reliable now.
This is how I removed O2 active:
1) Use file explorer to navigate to: my device>windows>startup.
2) Move the file called connections to another folder.
3) Navigate to: my device>windows>fonts.
4) Rename the "xpdr_02" file to "xpdr_021".
5) Soft reset your phone.
6) Go to: Settings>system>remove programs.
7) Uninstall O2 active. You may get a message saying that certain dll files are in use in windows directory- simply use file explorer to rename these files and try again. Rename them back afterwards.
8) Use file explorer to navigate to: my device>windows>fonts.
9) Rename the "xpdr_021" file back to "xpdr_02".
10) Navigate to: my device>windows>mobile solutions.
11) Cut and paste this folder to your built in storage
12) Soft reset the phone.
Thanks Hedley!
Hedley,
:?:
I just thought of a question re your unistall procedure.
After unistall, can you change 'profile' in order not to cause problems on aircraft?
In Active, I quite liked the simplicity of the email setup. I suppose once it's installed it is not neccessary, but did you find / is there anything else likely to be needed after removing?
Thanks
It is definately Faster!!
I am impressed with this one, my XDAIIi is definately a lot faster!
Cheers for that! :lol:
Airplane trips?
andromeda9 said:
Thanks Hedley!
Click to expand...
Click to collapse
Hi Hedley,
:?:
I'm thinking about what you describe, maybe migfht trial it over Christmas... but once Active is uninstalled can you tell me how I might cope with Airplane travel?
i.e. can you turn off the 'airplane' parts? because obviously just shutting down the XDA leves it actively listening.#
Thanks
"Flight" mode
You can enable flight mode (turn off mobile receiver) by tapping the reception icon on the top bar. In the bubble that appears, there is a link to "Turn on flight mode" / "Turn off flight mode"
The piece of software I really miss in the O2 active is the "profile" stuff, which unless I'm blind isn't in the 2003 OS. For example: normal, work, silent, noisy etc
I wouldn't manually uninstall the Active rubbish - do a corporate install instead. If you have to manually delete locked files etc etc you're asking for trouble later.
Thanks MMM
Thanks for the information and tips.
What is a corporate install - I am not familar with the term.
thorneh said:
7) Uninstall O2 active. You may get a message saying that certain dll files are in use in windows directory- simply use file explorer to rename these files and try again. Rename them back afterwards.
Click to expand...
Click to collapse
Goto Start->Settings->Today->Items and uncheck the ones O2 puts on there (can't think off hand which ones they are!) this stops the dll in use messages.
mmm_ok said:
I wouldn't manually uninstall the Active rubbish - do a corporate install instead. If you have to manually delete locked files etc etc you're asking for trouble later.
Click to expand...
Click to collapse
The only problem with the corporate install I found, was it didn't setup the O2 GPRS and MMS settings before finishing device setup, I had a pain setting them up manually, and when I finally managed it, they didn't work 100% (or maybe it was i didn't trust my work 100%!)
You can invoke a corporate install by selecting it when it asks if you are a personal or corporate user. it'll ask you for a password, which is 0506 if memory serves me correct.
Hi there sorry if this is the wrong section, but I was hoping Pug would be able to tell me how to upgrade my ROM, etc because I'am still using the original.
Also could someone be so kind as to list a tap by tap guide to setting up my XDA IIi to connect to O2 Active, and Mobile Web, as I have a pay as you go SIM card in the XDA IIi?
Thanks alot peeps.
rmurph17 said:
Hi there sorry if this is the wrong section, but I was hoping Pug would be able to tell me how to upgrade my ROM, etc because I'am still using the original.
Also could someone be so kind as to list a tap by tap guide to setting up my XDA IIi to connect to O2 Active, and Mobile Web, as I have a pay as you go SIM card in the XDA IIi?
Thanks alot peeps.
Click to expand...
Click to collapse
Hi, There is plenty in the Alpine sections about upgrading to the various ROM sections, just have a look or search. You will find the files here, ftp://xda:[email protected]/Uploads/Alpine/
You can see what PUG ROM version I use, which I have found to be very good.
Sometime ago I uploaded all the cab files for your Carrier Settings, just copy cab to XDA IIi and tap to run, after the cab has installed the settings, it will delete itself, so make sure you keep a copy for future use.
http://forum.xda-developers.com/viewtopic.php?t=26463
rmurph17 said:
Hi there sorry if this is the wrong section, but I was hoping Pug would be able to tell me how to upgrade my ROM, etc because I'am still using the original.
Also could someone be so kind as to list a tap by tap guide to setting up my XDA IIi to connect to O2 Active, and Mobile Web, as I have a pay as you go SIM card in the XDA IIi?
Thanks alot peeps.
Click to expand...
Click to collapse
The latest PUG upgrade is here, ftp://ftp.xda-developers.com/Uploads/Alpine/O2_Roms__Camera_Fixed_Pug
There are 2 files here, one has all the unneccessary 02 software outstripped and the other with all the 02 software included.
Once downloaded, extract to a folder on your desktop (or anywhere on your PC). Make sure your PDA is connected via the cradle and Activesync. Goto the folder you have extracted the files to on your PC, click to run MaUpgradeUt_noID.exe, just click OK, then you should see a message saying it is checking your Device, your devices screen should go blank (Although you will see some dark text including the word Serial on your PDA)
You should then get a screen saying what ROM version you have and the New version, press ok then a screen will pop up saying checking device, the common thing to happen here is it will stop in this screen, what 5 mins if it doesn't change then don't touch your PDA, CTRL-Alt-DEL on your PC keyboard to bring up Task Manager, select the Process Tab and look for the file name MaUpgradeUt_noID, highlight it with one click and then press End Process button, go back to the folder and run MaUpgradeUt_noID again follow the screen instructions again and then it will update this time, indicated by a install bar screen, it will take about 20mins to complete.
Once updated remove your PDA from its cradle and hold the Power Button down and at the same time press the softreset hole with your Stylus, this will Hard Reset (Factory Settings) your device, depending on the version you have installed follow instructions on the PDA, it will install some more files which take 5 to 10 mins to install. Thats it you device is now updated.
For your carrier settings goto http://forum.xda-developers.com/viewtopic.php?t=26463, there you will find the CAB files for your Phone Carrier (remember there is a file for PAYT and Contract for each Carrier, download the correct one for you), download the correct one for you and copy to your PDA, tap to run and your correct MMS/GPRS/WAP settings are then installed. Very Happy
**Please Note before you update your PDA. Please copy anything you want to keep on your PDA to your PC, don't worry about SD storage or the other Perminent Storage area as the update leaves these untouched. If you want to save your Contacts and or your Appointments and Tasks then goto Settings on your PDA select second Tab and then select Perminent Save, tick your selection and tap OK, then once you have carried out the update go back to Perminant Save and tick boxes you want restored and then tap OK, this function will dynamically keep your backup upto date, so you can use this anytime.
Phew, hope this helps.
I have tried all teh CAB files, and all the individual settings, to get full GPRS working on my O2 PAYT SIM.
After 2 emails to o2's technical department (which at least they answered within 24 hours) I was assured that the reason I couldnt connect is the APN whould be set to mobile.o2.co.uk - but that ONLY worked on contract plans.
They categorically stated that PAYT O2 ONLY features WAP GPRS, i.e. those small WAP-sites suited to mobile phones, and not the 'full deal' (ie web browsing, irc, MSN MEssenger etc)
...so, after a LONG time with O2 PAYT, I am now a Vodafone customer with a Vodafone PAYT SIM!
I can surf the web, join my irc channels, use MSN Messenger, the works, and they emailled me the correct settings the very same day I emailled them to ask for them too.
Joe Pinball
now a happy Vodafone GPRS internet user!
Hi,
just got an 2nd hand xda IIi earlier on today and seem somewhat shafted as i only have macs and no pcs, been looking arround for the last few hours to find some form of sync software which doesnt cost
can anyone tell me how to update the rom from a mac?
cheers
Ok,
so im guessing from spending hours searching the forums here last night unless im willing to buy pocketmac or missing sync there is nothing.
think i will use a virtual pc *sigh*
roll on the x86 mac hardware.
Mac OS is based on BSD. I believe there are scripts floating around here in perl that any decent *nix flavour should run. Perhaps some of these might be able to help you.
if you can run a Virtual PC with access to USB ports on the Mac, I'd reckon that would be the easiest (!) approach to adding Activesync for syncing files etc & installing any applications, as all of the pocket PC apps' installers are also windows-based.
Joe
had a long look for perl stuff and didnt find much so got virtual pc installed now. just got pugs rom on the xda and the speed has incresed (it doesn't feel as slugish anymore) wifi signal is a lot better, but i still seem to have BT issues, wonder if thats something to do with my headset though.. sounds like bad reception sometimes even though the phone is only in my coat pocket.
I just upgraded the ROM and after upgrade, I notice that the few websites (www.wf.com and beta.m.yahoo.com ) which previously used to work with 1.57.502.2 ROM, does not work anymore. When I try the first one, I get "Browser not Supported" and when I try the website I get "HTC Pilgrim not supported". Anybody else has this problem? Any clues? This problem I reported with these 2 websites occurs with both IE and Opera Mobile browsers. First I thought it was limited to IE, but verified Opera as well which has same problem. So, I am sure it has to do with this new ROM upgrade which changed some of the registry settings or device identifier. Anybody any clues ?
There are several ways to fix this problem, the easiest being,
use KaiserTweak that is stickied at the top of this forum, and change PIE User Agent CustomBase to HTC-8900(AT&T Tilt).
Or you can use a registry editor to do the same thing.
I prefer KaiserTweak, it's easier and lots of stuff you can tweak.
Alemaker
KaiserTweak worked for me. For some reason the 1.62 ROM I downloaded had defaulted to the stock TyTn II PIE Agent. I switched it to HTC-8900, soft reset, and bammo, back in business. From what i remember, the old rom was defaulted to HTC-8900 when i opened KaiserTweak the first time.
This problem still continues with Opera Mobile
Great, Thanks!! KaiserTweak help me fix the problem with IE.
But it still same issues visiting these websites from Opera Mobile, any other magic here?
try un-installing and re-installing Opera, and make sure to get rid of all it's folders on your phone before re-installing.
Still not working
I uninstalled Opera, then made sure that I removed all the folders/files it had created, then did a soft reset and then re-installed opera, still no luck. Continue to have issues with these 2 websites. Any other ideas ?
i just recently updated to the 1.62.xxxx rom... i dont have problems with opera though but i got these issues on my fone.. 1st off, when i take a picture, i cannot load the file.. i cant see what i took. it gives me an error saying that the file cannot be opened(this happens when the default storage is the storage card.) also, when i save something to the storage card, i get another error that says, a device attached to the system is not functioning. i already tried doing a hard reset and i still get errors... any clues??? thanks! im thnking of going bck to the old ATT rom... (sorry for any typos.. im using my phone to write this reply... )
i know this might be a stupid question for everyone that knows what their doing but i do have a registry editor but i cant find the place to change the pie agent.....where can i go to change that?
thanks in advance for your help
why not just use kaisertweak or search for the reg key, although i bet its easier to use kaisertweak
im really a noob so i dont know anything about kaiser tweaks but i have task manager that has reg edit on it...so id rather use that then just getting a new program. i hope someone can help me find that location to switch the user agent. but just wondering does changing it really make a major difference???
No HSDPA
With the previous ROM I was able to take advantage of the increased speed of "H" while on the internet after using the Kaiser Tweak. With the new 1.62 ROM my "H" seems to have dissapeared and I only see the 3G even after running the Kaiser Tweak again. Anyone else having this issue? Did our friends AT&T get greedy and lock us out of the high speed?
sunil28 said:
I uninstalled Opera, then made sure that I removed all the folders/files it had created, then did a soft reset and then re-installed opera, still no luck. Continue to have issues with these 2 websites. Any other ideas ?
Click to expand...
Click to collapse
I do not believe it will work with Opera. Opera routes you through a proxy which reformats content for your device. The websites my not recognize this or the device ID may get screwed up. I was trying to visit some music website that only allows visitors from the US, but was told I could not access bc I was browsing from outside the US - bc the Opera server is not located in the US.
I just bought a Touch Diamond -very nice phone with a couple exceptions.
Touchflo 3d is nice but Im finding it doesnt have much depth - it needs more functions. And the loudspeaker is not very good - not loud, not clear.
Anyways, its my first windows mobile phone and had a couple questions about what WM6.1 can do. Im using Vista btw.
1. Email - Im downloading ALL my email and its fairly big. Can I force it to save only to internal storage?
2. Music - How do you get the album photo to come up while playing through Touchflo music - the picture does come up if i just play in windows media player.
3. Is it possible to add/remove multiple contacts from the People Menu ie Favourite contact
4. Most important - connectivity. Is it possible to access the phone wirelessly from PC via router? The phone connects to the router wirelessly fine and I can use the internet. But what I want to be able to do is either access the internal storage or sync up with outlook without using the usb cable.
5. What kind of BASIC phone functions does it have?
Eg. Call timer during call
Stop it going to that call history page after a call - i want it to go straight back to home.
Theres more functions it seems to be missing....
6. How do you make it so it FULLY shuts down a program when u hit the top right close button? I dont want to have to keep re-hitting the top right button to open task manager and full close it that way.
7. Lastly, is there any secret tips that a newbie wouldnt know about eg. codes to get to secret menus etc?
1. I don't think so, but I don't download email, so somebody who does may be able to help.
2. Strange problem, probably to do with the version of ID3 tags each uses. But again I have no idea how to solve it
3. No idea with no device in hand
4. Microsoft, being twats, reoved sync via Wi-Fi with the upgrade to WM2003. So, sorry mate, no way that I know
5. My dialer on my other PPC has call timer I think, but the diamond's may not, a new dialer with it included may solve the problem.
Other stuff missing?
6. Get a proper x button, like WKTask, or Wisbar, or something similar. Its also probably possible to change the settings to make it close by tapping X. I also think that with the HTC program, you can close by tap and hold, or, from today, click where the x should be, and a menu comes up enabling you to close them individually.
7. Secret codes? Not that I know of.
Hope the small things I have known here do help
Rory
Yeah, 6 is definitely something that can be done in the standard Windows Mobile settings (unless they've removed the setting in 6.1, in which case a registry edit might do it).
I guess when the phone has been out for a while, a lot of registry tweaks and utils will show up around here to adress all kinds of small and big issues.
i was gona go for a diamond but look at htc touch pro. everything diamond plus hardware keyboard and memory expansion slot (minus front camera).
Found how to fully close the progam in one go - went to task manager - button - and chose "End Programs by tapping X"
Under this option is "End programs by tapping and holding X" which is the default.
I tried it and it does work but I dont like it. Coz u cant really tell how long to hold it. If u keep holding, the program actually just stays open until u release. And I guess if u release too early it wont fully close.
Anyways - thats not a huge issue - wireless sync is!!!!!!!!!!!!!!
Has anyone found a way to get around it?
Best you can do with WIFI is put the UNC name of your pc into the browser and bring up the shares.
If you want to sync wirelessly, you'll have to do it via bluetooth. You should be able to get a bluetooth dongle for your pc for about 20 bucks though.
OH YEAH!!!!!!!! Going through Opera to browse my PC directory - You little beauty!!!
Now, how do I set up a name for the diamond so I can see it on my PC. Is there a setting you have to enable? I browse for "PCs" and it doesnt find the diamond - just my other PCs