Related
Here is liberated Chinese Traditional SnapVue, http://www.zshare.net/download/177435127433672d/
Please use this for your ROM Cooking to help localization. This is backup of my system.
Thanks to cmonex for her help in reconstructing NBH file. She is amazing.
Thanks to thaihugo for WWE 1.22. I used to extract the OS.nb file.
Thanks to pof for the thread, how to dump HTC Shift ROM.
Thanks to all who answered my questions regarding this.
I am planning to install thaihugo 1.22, because I cannot read chinese and move to WWE.
I am learning cooking, please let me know how could i help. I have few cycles available for the next couple of weeks.
Thanks
Ram
Thanks for your help
Right now, my two subjects are phone and video (d3d mainly). If you want to help, please try to make this work on my rom, or to provide the necessary folders from SYS to adapt to any rom. Make sure you post your progress so we can stay in sync
Will do.
thaihugo
definately. If I could get phone and d3d on this, i could retire hermes, that I am using for my official calls and keep dell lattitude 620 home while travelling. I will try to work on those and update the progress.
Thanks
Ram
thanks a lot for your ROM, I flashed the new ROM without backing up the original ROM, otherwise, I will have problem if my shift needed to take back for service.
szjohnwong said:
thanks a lot for your ROM, I flashed the new ROM without backing up the original ROM, otherwise, I will have problem if my shift needed to take back for service.
Click to expand...
Click to collapse
szjohnwong
No problem. you are welcome.
Thanks
Ram
one more request, can you make it with RUU?
we can wait!
Hi Saiweb,
I'd flash your rom without backup mine original rom. After completed, it said flash is successfully but the Snapvue side goes dark.
How can I recover it?
Many Thanks1
Hi Saiweb,
Can you post the original CHT rom?
Many Thanks!
hkesunny said:
Hi Saiweb,
Can you post the original CHT rom?
Many Thanks!
Click to expand...
Click to collapse
It is original ROM only. For your other question, I am currently travelling as soon as I am back home, I would help you out. did you try to hard reset (take out battery, wait for few seconds and reinsert battery) and try.
Thanks
Ram
szjohnwong said:
one more request, can you make it with RUU?
we can wait!
Click to expand...
Click to collapse
Hi
I am currently travelling. I will as soon as I am back home.
Thanks
Ram
hkesunny said:
Hi Saiweb,
I'd flash your rom without backup mine original rom. After completed, it said flash is successfully but the Snapvue side goes dark.
How can I recover it?
Many Thanks1
Click to expand...
Click to collapse
Hi Sunny
I sent you couple of PMs regarding this. Follow this thread, http://forum.xda-developers.com/showthread.php?t=421351
Let me know how did it go.
Thanks
Ram
Try this.
hkesunny said:
Hi Saiweb,
I'd flash your rom without backup mine original rom. After completed, it said flash is successfully but the Snapvue side goes dark.
How can I recover it?
Many Thanks1
Click to expand...
Click to collapse
Hi Sunny
I am able to flash it back to CHT frofile uploaded, but anyway this time I followed thaihugo mentioned style to extract, try this and let me know. This doesn't have GPS though. ruu_signed.cht.nbh - 57.22MB
Thanks
Ram
saiweb said:
Hi Sunny
I am able to flash it back to CHT frofile uploaded, but anyway this time I followed thaihugo mentioned style to extract, try this and let me know. This doesn't have GPS though. ruu_signed.cht.nbh - 57.22MB
Thanks
Ram
Click to expand...
Click to collapse
Dear Ram,
Thanks a lot for your great help. Your NBH file is downloading and I will keep you update.
Sunny
saiweb said:
Hi Sunny
I am able to flash it back to CHT frofile uploaded, but anyway this time I followed thaihugo mentioned style to extract, try this and let me know. This doesn't have GPS though. ruu_signed.cht.nbh - 57.22MB
Thanks
Ram
Click to expand...
Click to collapse
Dear Ram,
Thanks again for your kindness and great work! Just restored your NBH using CustomRUU. Everything looks fine and I got back the Chinese Snapvue. Could you do me a favor use Thaihugo mentioned style to re-build the Rom with the GPS?
Your kindness is much much appreciated!
Sunny
Gps is there if you copy OEMdrivers folder from my source. The gpstool, used to check the gps, is not here if you don't copy the content of the OEM folder. But you can try google maps to see if it get a fix.
Cool.
hkesunny said:
Dear Ram,
Thanks again for your kindness and great work! Just restored your NBH using CustomRUU. Everything looks fine and I got back the Chinese Snapvue. Could you do me a favor use Thaihugo mentioned style to re-build the Rom with the GPS?
Your kindness is much much appreciated!
Sunny
Click to expand...
Click to collapse
Sunny
Glad to know that it worked for you. Definately, will add GPS to that and upload it again.
Thanks
Ram
thaihugo said:
Gps is there if you copy OEMdrivers folder from my source. The gpstool, used to check the gps, is not here if you don't copy the content of the OEM folder. But you can try google maps to see if it get a fix.
Click to expand...
Click to collapse
thaihugo
I will do that. how far did you go with Phone?
Thanks
Ram
For the phone, I couldn't find any DLL that can connect. It's either a radio problem, or the RIL.Dll and rilphone.dll that must be found. Using the one from kaiser doesn't help, as it complains about sim door not locked.
So far, I cannot go further, but maybe the rights DLL's can make if work. That's also why I'm posting the kitchen, and hope to discuss about this in the thread.
thaihugo said:
For the phone, I couldn't find any DLL that can connect. It's either a radio problem, or the RIL.Dll and rilphone.dll that must be found. Using the one from kaiser doesn't help, as it complains about sim door not locked.
So far, I cannot go further, but maybe the rights DLL's can make if work. That's also why I'm posting the kitchen, and hope to discuss about this in the thread.
Click to expand...
Click to collapse
Ok. I will work on that. I have few cycles free starting today.
Thanks
Ram
saiweb said:
Sunny
Glad to know that it worked for you. Definately, will add GPS to that and upload it again.
Thanks
Ram
Click to expand...
Click to collapse
Dear Ram,
Few days past, still waiting your CHT Rom with GPS.
Thanks
Sunny
OK, so i installed andvanceconfig to my fuze, but everytime i try to open it a message says an unexpected error has ocurred. it looks like this:
at
Microsoft.AGL.Common. MISC. HandleAR()
at
System. Windows. Forms. ImageList..ctor()
at Advanceconfig.(square).(square)()
at Advanceconfig.(square)..ctor()
at Advanceconfig.(square).(square)()
help please!!!
note: i already have net 3.5 installed
danes0301 said:
note: i already have net 3.5 installed
Click to expand...
Click to collapse
normally i'd ask if 3.5 was installed.
what rom and have you experienced anything like this with other apps? also, did you install 3.5 from a cab or was it in the rom?
ndn715 said:
what rom and have you experienced anything like this with other apps? also, did you install 3.5 from a cab or was it in the rom?
Click to expand...
Click to collapse
the problem is only with that particular app,every other app runs smooth, the 3.5 was installed using a cab
and what do mean by "what rom"??
thanks
nevermind, i just had to restart the phone, thank you anyways.
Watch out for Advanced Config. Some (like me) have found that it screws up basic function like being able to answer a damn call. There's a thread about this on PPCGeeks somewhere.
Lorrimer said:
Watch out for Advanced Config. Some (like me) have found that it screws up basic function like being able to answer a damn call. There's a thread about this on PPCGeeks somewhere.
Click to expand...
Click to collapse
thanks for the advice, i don't wanna mess with it too much anyways, i don't wanna end up with a non-working fuze, lol
Flashed Miri_WM65_23004_Premium_Manila_2.5_REV2
My Touch HD has lost it's graphics capability: only able to display 4 colours. It keeps freezing. I want to remove the update. Help would be appreciated at this point.
Dude, change your SPL to 1.56 & it will be alright...
trangkae said:
Flashed Miri_WM65_23004_Premium_Manila_2.5_REV2
My Touch HD has lost it's graphics capability: only able to display 4 colours. It keeps freezing. I want to remove the update. Help would be appreciated at this point.
Click to expand...
Click to collapse
read this
http://forum.xda-developers.com/showthread.php?t=505377
trangkae said:
Flashed Miri_WM65_23004_Premium_Manila_2.5_REV2
My Touch HD has lost it's graphics capability: only able to display 4 colours. It keeps freezing. I want to remove the update. Help would be appreciated at this point.
Click to expand...
Click to collapse
did u use HSPL Olinex 1.56?
Read the instructions. and post problems on miris post http://forum.xda-developers.com/showthread.php?t=493911
a simple search would have solved your problem!!!!!!!!!!
Miri_WM65_23004_Premium_Manila_2.5_REV2
I thought I had updated to 1.56; It appeared to install. Obviously somthing failed. After trying all ROMs; finally looking at startup BIOS: I realised what was amiss: 1.56.
I know I am new to this; but boy am I
trangkae said:
I thought I had updated to 1.56; It appeared to install. Obviously somthing failed. After trying all ROMs; finally looking at startup BIOS: I realised what was amiss: 1.56.
I know I am new to this; but boy am I
Click to expand...
Click to collapse
This is a pointless tread.
please people use miris tread in link above. a search will answer your questions??????
Hey peeps,
Here are some lockscreens, I hope you like it
P.S. Thanks to dima_sk8er/Gerasimov for his androidlockscreen, i have used his cab and edited some files.
V1 LOCKSCREENS
V2 LOCKSCREENS
Wow! Looks very nice! Great work!
Can you correct "Gerasimov" to "dima_sk8er". Gerasimov - is my last name
Sorry for my bad English.
Yeah sure Thx for your reply..
does not work on i900
I have an omnia myself and it works for me. I dont know what the problem is, can you explain it?
Nice..
love the V1..more light
my P3600i
it cannot work how can it
do
Nice lock screen, gonna try it soon.......
Thank you for sharing.
It's so cool!!!
I like it.
plzz add mirror link in media fire. www.multiupload.com is filter for me
ty
Which one? Dont say everyone pls
hi ,did not notice your thread before... I use gerasimov android lockscreen but your V1 looks really cool and minimal, could you please make it in wvga resolutions?
This is great, I love it. But before I try it, can you please answer me the following questions if you don't mind:
1. I have a Samsung Omnia i900, I already read that this will work on my phone in earlier post of this thread, but Should this replace the build in Unlock screen of the Omnia i900? (you know, that blue screen "Tap Unlock" to unlock device).
2. I also use SPB Mobile Shell 3.5.5, My ROM is the latest original WinMo 6.1 Pro that comes with the device, Will this lock/unlock of yours cause problems with that?
3. Where do I install the CAB file? in My Device or I can install it on My Storage?
Thank you in fornt. Waiting for your feedback.
This lockscreen is replacing the default lockscreen and you must install it my device, but i am not sure if its gonna work on a 6.1 rom..
- What's the worst scenario if this doesn't work on 6.1 rom?
- In case I install it (and yes, it will overwrite the original lock screen of 6.1 rom), but is it reversible? Can it be uninstalled from Remove Programs and if that is possible, will the original lock screen of 6.1 rom be back?
Sorry for asking too many questions, but i always wanna be sure before I do something. Better late than sorrow
Yes its removable and the original lock screen will come back
Thank you styla42, I will try it now and I would notify you with the results .
Cheers mate
---------- Post added at 04:17 AM ---------- Previous post was at 03:47 AM ----------
No, it's not working, uninstalled and now it's back the old one like you said.
Anyway thanks for your assistance
Could reupload V1 Grey version? Everywhere it says that file is deleted
Updated first post, there is a problem with multiupload, thx for your warning..
Thanks for reupload
Whoops, i noticed some bug. I unistalled previous lockscreen, reset, installed yours, reset. Now when i lock my device there`s not sliding bar in the bottom of screen, but the little padlock symbol in the top. I`d like to have lockscreen like on the screens in your first post. Did i something wrong while installing it? My phone is Xperia X1. Sorry for my bad English.
Hi,
I don't know if this is the place to posting this but, anyway, i have to post it, if it's wrong please excuse me.
I have a SGA i'm root user and i've been flasing roms in my device for some time with CMW5. In this time I should made some mistake or smth...
I have an issue with the left touch-button on the screen, this button seems disabled... But when i was using StockLite v8 i discovered this button still works, this rom has the option to create a virtual button on state bar, when i touch this virtual botton it sounds two ticks, like it was executing both buttons, also this options table that appear when you tick in the button appears on its will. Anyway usb mass storage also don't work. This issue is fixed with terminal emulator tiping some lines. But left button's issue... I would appreciate any kind of help.
Thanks and sorry for my poor english.
Reflash with Odin
Try reflashing original stock rom with Odin and comment.
Well, I think thats a rom problem.
Try to post in your rom thread, maybe you'll get better help
Sent from my GT-S5830 using xda app-developers app
Ostrogradsky said:
Hi,
I don't know if this is the place to posting this but, anyway, i have to post it, if it's wrong please excuse me.
I have a SGA i'm root user and i've been flasing roms in my device for some time with CMW5. In this time I should made some mistake or smth...
I have an issue with the left touch-button on the screen, this button seems disabled... But when i was using StockLite v8 i discovered this button still works, this rom has the option to create a virtual button on state bar, when i touch this virtual botton it sounds two ticks, like it was executing both buttons, also this options table that appear when you tick in the button appears on its will. Anyway usb mass storage also don't work. This issue is fixed with terminal emulator tiping some lines. But left button's issue... I would appreciate any kind of help.
Thanks and sorry for my poor english.
Click to expand...
Click to collapse
Looks like you are a new member to this Forum..... Actually Questions shouldn't go in general section.....You have to post the question's in Q & A section ......As you are a new member you will be prone to this type of mistakes...so just have a look at the FORUM RULE'S and save yourself from trouble's . ..Better luck next time..
>>>>>>>>>>>>>>>REPORTED<<<<<<<<<<<<
Ulisses5590 said:
Try reflashing original stock rom with Odin and comment.
Click to expand...
Click to collapse
Thanks for your help... but that's not working... This morning the button has been working for a while, and when i open whatsapp it's kind of disturbing 'cause it's doing what it wants while i'm using keyboard for tiping something.... I've tried tipping some codes in dialer for calibrate touchscreen but that's not working neither...
Thanks for your help again.
puneeth.007 said:
Looks like you are a new member to this Forum..... Actually Questions shouldn't go in general section.....You have to post the question's in Q & A section ......As you are a new member you will be prone to this type of mistakes...so just have a look at the FORUM RULE'S and save yourself from trouble's . ..Better luck next time..
>>>>>>>>>>>>>>>REPORTED<<<<<<<<<<<<
Click to expand...
Click to collapse
Thanks for your attention... A detail from you.
qashqool said:
Well, I think thats a rom problem.
Try to post in your rom thread, maybe you'll get better help
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
Thanks for your attention but this isn't a rom problem i've flashed many roms and this problems persists...
Ostrogradsky said:
Thanks for your attention but this isn't a rom problem i've flashed many roms and this problems persists...
Click to expand...
Click to collapse
what's your rom, and kernel?
qashqool said:
what's your rom, and kernel?
Click to expand...
Click to collapse
Hi, my actual rom is "AceOne 2.2" based on cyanogenmod 7.2. Kernel is 2.6.35.14-firekernel-09.10.12 [email protected]))
I've tried with many roms, stock and custom... and the issue still there. This morning the touch-button worked perfectly for a while, after i unblock screen the issue salute me again lol.
Ostrogradsky said:
Hi, my actual rom is "AceOne 2.2" based on cyanogenmod 7.2. Kernel is 2.6.35.14-firekernel-09.10.12 [email protected]))
I've tried with many roms, stock and custom... and the issue still there. This morning the touch-button worked perfectly for a while, after i unblock screen the issue salute me again lol.
Click to expand...
Click to collapse
Cant help you with that rom, dont know it. (Who's the dev?)
Try this app, if doesnt work you can just to unistall it
qashqool said:
Cant help you with that rom, dont know it. (Who's the dev?)
Try this app, if doesnt work you can just to unistall it
Click to expand...
Click to collapse
LOL!
It's a wonderful rom from a Spanish android community
But screen filter?¿ to enable left touch button¿? menu button¿?... screen filter is to reduce/increase brightness
Viper The Ripper said:
LOL!
It's a wonderful rom from a Spanish android community
But screen filter?¿ to enable left touch button¿? menu button¿?... screen filter is to reduce/increase brightness
Click to expand...
Click to collapse
hello viper, I know that you know more then me in android, and your help is always appreciated, unfortunately instead of helping, prefer kidding me. If you have a better solution would be good that you give it to help this friend. Actually I said I didnt knew this rom.
Notice that "screen filter" has a function "enable soft-key backlightt" that could help. If dont nothing more than uninstall it.
At least I tried to help, and you?
I'm sure there is still time to help him, what do you choose to do?
Ostrogradsky said:
Hi,
I don't know if this is the place to posting this but, anyway, i have to post it, if it's wrong please excuse me.
I have a SGA i'm root user and i've been flasing roms in my device for some time with CMW5. In this time I should made some mistake or smth...
I have an issue with the left touch-button on the screen, this button seems disabled... But when i was using StockLite v8 i discovered this button still works, this rom has the option to create a virtual button on state bar, when i touch this virtual botton it sounds two ticks, like it was executing both buttons, also this options table that appear when you tick in the button appears on its will. Anyway usb mass storage also don't work. This issue is fixed with terminal emulator tiping some lines. But left button's issue... I would appreciate any kind of help.
Thanks and sorry for my poor english.
Click to expand...
Click to collapse
this is purely a rom problem, some roms dont allow for touch keys to be activated, or in your case, only allow 1 to be activated. UMS isnt supported on every rom, but u can flash a thing for it, search xda for a UMS thing, there is one, and i have used it before
Hartik said:
this is purely a rom problem, some roms dont allow for touch keys to be activated, or in your case, only allow 1 to be activated. UMS isnt supported on every rom, but u can flash a thing for it, search xda for a UMS thing, there is one, and i have used it before
Click to expand...
Click to collapse
I'm glad what I said first was true, was a rom issue.:laugh:
btw, although it was a mistake, as viper said, the soft-key function of the app I spoke about, doesnt work in ACE [but the app is interesting (I didnt knew it) when you have the screen brightness to the street and enters a house, you can instantly download the brightness, and turn it back when you leave. I'm gonna try it better)
qashqool said:
I'm glad what I said first was true, was a rom issue.:laugh:
btw, although it was a mistake, as viper said, the soft-key function of the app I spoke about, doesnt work in ACE [but the app is interesting (I didnt knew it) when you have the screen brightness to the street and enters a house, you can instantly download the brightness, and turn it back when you leave. I'm gonna try it better)
Click to expand...
Click to collapse
i dont know what you are talking about, if its the thing where when u enter dark areas the screen brightness goes down, and in bright areas, brightness goes up, then u need a light sensor on ur phone, which the ace does not have
You' re rigth ace hasnt light sensor.that's why this app seems OK, to do it manually
Sent from my GT-S5830 using xda app-developers app
qashqool said:
I'm glad what I said first was true, was a rom issue.:laugh:
btw, although it was a mistake, as viper said, the soft-key function of the app I spoke about, doesnt work in ACE [but the app is interesting (I didnt knew it) when you have the screen brightness to the street and enters a house, you can instantly download the brightness, and turn it back when you leave. I'm gonna try it better)
Click to expand...
Click to collapse
I flashed stock rom with Odin like the first guy who respond this post told me and the issue still persists... I'm not developer but thats not that complex... it's not a rom problem.
Ostrogradsky said:
I flashed stock rom with Odin like the first guy who respond this post told me and the issue still persists... I'm not developer but thats not that complex... it's not a rom problem.
Click to expand...
Click to collapse
re download rom from somewhere else
qashqool said:
hello viper, I know that you know more then me in android, and your help is always appreciated, unfortunately instead of helping, prefer kidding me. If you have a better solution would be good that you give it to help this friend. Actually I said I didnt knew this rom.
Notice that "screen filter" has a function "enable soft-key backlightt" that could help. If dont nothing more than uninstall it.
At least I tried to help, and you?
I'm sure there is still time to help him, what do you choose to do?
Click to expand...
Click to collapse
... I wasn't kidding you, I used this app for a while long time ago :S I don't know about the current version/ caracteristics but well...
Let's help our friend! xDDDDDDDDDD
Viper The Ripper's Method of help ...
1. Install Terminal Emulator (google playstore)
2. Type this code in Ternimal;
Code:
su
echo 1 > /sys/class/leds/button-backlight/brightness
chmod 444 /sys/class/leds/button-backlight/brightness
If your touch buttons stay on, then your buttons work well xD
Great, Viber
I'm sure he'll be pleased
And I'm always learning something new
Thks :highfive: