Related
Hi,
Is it possible to install a TouchFLO CAB onto the AT&T Tilt? I have searched throughout this site and have seen it mentioned, but I have not found the actual TouchFLO CAB that I can install.
Thanks for your time.
already built in
Ya, it's already built in on our Tilts... but here's a twist...
What if I don't want to hear that stupid ticking sound? I remember seeing on the Kaiser ROM the option to turn it off, but the Tilt has no such menu option.
Moreso, how can one disable TouchFLO altogether? I don't recall seeing it as a Service or in the Startup menu0
I'm using helmi_c's cleaned up AT&T Tilt ROM.
You can edit the stupid ticking sound in the registry. 0=off
You can turn it OFF in the registry.
BeyondtheTech said:
Ya, it's already built in on our Tilts... but here's a twist...
What if I don't want to hear that stupid ticking sound? I remember seeing on the Kaiser ROM the option to turn it off, but the Tilt has no such menu option.
Moreso, how can one disable TouchFLO altogether? I don't recall seeing it as a Service or in the Startup menu0
I'm using helmi_c's cleaned up AT&T Tilt ROM.
Click to expand...
Click to collapse
HKLM\Software\OEM\TFLOSettings\EnableSound
disabled = 1
Or Downlaod and use KaiserTweaks, which has that, and many more tweaks you might enjoy. http://forum.xda-developers.com/showthread.php?t=333898
thanks everyone. I didn't realize I had touchflo because of two reasons.
1) there is no touchflo icon under settings.
2) touchflo isn't working for me when I use my finger to scroll. I think, I am not sure, that it is because I am using the protective screen that came in the AT&T box. That would suck.
Anyone experiencing the same thing?
You can change the sensitivity of TouchFLO via a registry change also containted in KaiserTweak....also, see this post for the "use cases" of how TouchFLO works...
http://forum.xda-developers.com/showpost.php?p=1572140&postcount=14
i'll take this one step further. I don't see anything period on my tilt for touchflo. where do I find it?
kinoons said:
i'll take this one step further. I don't see anything period on my tilt for touchflo. where do I find it?
Click to expand...
Click to collapse
The Tilt doesn't have the TouchFLO options config settings page. But it does ave TouchFLO. Bear in mind, TouchFLO is the finger dragging capability. The TouchFLO does NOT have the "cube" from the Touch phones. It just has the same ability to use your finger to move around the screen and "drag" pages.
Since there's no program on the Tilt to set the TouchFLO settings, you need to either do registry edits or use an app like KaiserTweak to modify the deault sensitivity and sound settings for it. Search around you'll find mor einfo. but that's the basics.
I'm trying to find the .exe file for the device lock and standby to link into tabs in ultimate launcher, looked all through the windows file but cannot find it. Any ideas please
vjDeviceLock
I don't think you will find an exe on your phone to do this. When I did it in UL I used vjDeviceLock. You can toggle the screen and lock the phone. Works great, is small, and FREE.
http://www.vijay555.com/?Releases:VJDeviceLock
Thanks, will it work ok with wm6 as it states wm5 only?
I've been using on wm6 for months. no problems.
psshutxp for soft resets,battery status has a device lock tool or the one that comes with htc home or use the device default lock plugin for today screen
O.K. I purchased the AT&T Tilt because I liked the wm6 device with the Touch flo aspect and home screen with the digital clock... so where is it? Did at&t remove it when they locked it?
hang yourself.
LOL........
LMAO!!!! To the OP, you need to research some more. Look up Kaiser Tweak if you want to turn Touch Flo back on. I think there may be a cab somewhere that puts the icon back in as well, but Kaiser Tweark or Schaps Advanced Config will work for you.
Essentially yes AT&T did remove it.
What you're talking about comes with the Official HTC Rom. But don't give up hope check out the wiki about cubes and ROM flashing.
Remeber to do searches first before posting. The only reason I'm answering is because I was where you are once. I felt overwhelmed.
mr.wildpig said:
O.K. I purchased the AT&T Tilt because I liked the wm6 device with the Touch flo aspect and home screen with the digital clock... so where is it? Did at&t remove it when they locked it?
Click to expand...
Click to collapse
As a few of our Senior Members already "hinted", you need to do a little more research.
TouchFlo is actually in the at&t Rom but the interface to disable sound is removed. Kaiser Tweak will allow you to manipulate the settings (including sensitivity).
FWIW, WM6 Pro does not have a Home Screen that is what the Standard version (no touchscreen) has. Pro uses a "Today" screen, I know what's the diff right but technically you are talking about something else.
If you liked the look of the large digital clock like is displayed on the wiki page reference images then that is not a WM6 thing but rather a HTC thing called HTC Home plug-in.
Please do yourself a faver and spend some time reading the wiki & the stickies.
The touch 3D works great for me, BUT it removes all my other today plugins, which I most definitely need.
Is there any way to combine the touch 3D, and still having access to the std today plugins?
Amir.
I have the same question- does anyone have any answers to this ? For example , I want to have the RSS feeds in my home screen along with TFLO3D ? is it possible?
use ultimate launch to place touchflo3d on first page and the other plugins on the next page. you can size one page to fit the whole screen so that you can switch between whole pages with your thumb or with a click, like you want
greets, pucki
ps: if you prefer freeware you can use battery status, it can include today plugins as well but you have to create a personal theme on a xml-base. i made it for nike and elf, it should work on diamond also. i'm going to use batterystatus too on the diamond, but we germans has to wait until t-mobile sells the device on july 14th. if you can wait so long i will give you my theme
Can't get ultimate launch to work. When I activate the first screen, my todayscreen stays blanc.
The Ultimate launch is than removed from the todayscreen.
Can you explain what I have to do to make my own xml file fot batterystatus?
Thanx
look here http://www.chi-tai.info/cs_batterystatus_xda_neo_wm5_ext_cust_im_cs.htm
Puckmeister said:
use ultimate launch to place touchflo3d on first page and the other plugins on the next page. you can size one page to fit the whole screen so that you can switch between whole pages with your thumb or with a click, like you want
greets, pucki
ps: if you prefer freeware you can use battery status, it can include today plugins as well but you have to create a personal theme on a xml-base. i made it for nike and elf, it should work on diamond also. i'm going to use batterystatus too on the diamond, but we germans has to wait until t-mobile sells the device on july 14th. if you can wait so long i will give you my theme
Click to expand...
Click to collapse
offtopic ...
you don't have to wait if you are o2 customer
johnkorver said:
Can't get ultimate launch to work. When I activate the first screen, my todayscreen stays blanc.
The Ultimate launch is than removed from the todayscreen.
Can you explain what I have to do to make my own xml file fot batterystatus?
Thanx
Click to expand...
Click to collapse
just had the same idea, ul didn't work at all
hopefully there will be a new ul version with diamond support
tf3d is so nice, i wish i could remove the internet tab and replace it with batterystatus instead!
Guys try this program http://www.chi-tai.info/download/SecondToday.zip and do this:
Copy SecondToday.exe to your desired location, e.g. \Program Files\SecondTody\SecondToday.exe and start the application
and then just copy the program again to windows start menu, and then add it to program list in the htc touch flo. then when ever you want it just click it.
Until now this is the best way to fix it
I went to their site I didn't understand anything. What does SecondToday do? I can get something from its name, but how does it actually work?
Direct download is impossible: go here: http://www.chi-tai.info/cs_wm_tools_im_cs.htm
basically what it does is that it is a program that opens the today screen without touch flo
fataldeath44 said:
basically what it does is that it is a program that opens the today screen without touch flo
Click to expand...
Click to collapse
Thank you for making that clear. Can you return to TouchFlo afterwards?
is it possible to run this second today - thing in autostart without interfering with touch3d?sometimes it does not open when i execute it...
i need to keep an eye on my calltimes and umts-data because both is limited due my contract and the only tool that handles both is (as far as i know) battery status...correct me if i'm wrong. gprs counter is bundled with my diamond but it isn't able to count call times...
edit: just tested it and second today always gets closed (or crashes) when touchflo3d is enabled...i can add plugins to 2nd today but when i switch back to touchflo3d second today not listed in taskmanager anymore after a couple of seconds.
Hi,
did anyone find a solution to make BatteryStatus run in Background in combination with TF3D or TF2D??
I also need that app but just for the dynamically OC-Freature....
Regards
touch-it said:
Hi,
did anyone find a solution to make BatteryStatus run in Background in combination with TF3D or TF2D??
I also need that app but just for the dynamically OC-Freature....
Regards
Click to expand...
Click to collapse
I use a program called Ariel Battery and disabled the default battery icon. Put Ariel Battery in your startup folder, you can modify color schemes, it's small and even shows you the %.
amir77a said:
The touch 3D works great for me, BUT it removes all my other today plugins, which I most definitely need.
Is there any way to combine the touch 3D, and still having access to the std today plugins?
Amir.
Click to expand...
Click to collapse
You will find the answer in that thread: http://forum.xda-developers.com/showthread.php?t=401907
Does anyone know of an alternative to TouchFlo 3D. I spoke to an HTC technician who told me that he uses a better program for his Diamond that has better response times etc, but he wouldn't say what it was. I was complaining about the response times on the phone.
He probably meant PointUI, SPB Mobile Shell, Winterface or any number of alternatives. Been trying SPB Mobile Shell 3 which is pretty good (there's a free trial) but my fav so far is PointUI (free "light" version) - http://www.pointui.com
There are also a couple of iPhone clone interfaces in the Development and Hacking section.
Thanks a lot for that echolock. I am just downloading the free Pointui to the phone. Do I have to disable TouchPro 3d before loading it or will it do that automatically. I am fairly new to the phone so please excuse my ignorance.
Yes, you have to disable TF3D before using PointUI.
After all, if you decide to keep PointUI instead of TF3D, you have to flash your phone with a naked Rom so you gain space and memory.
Do you know how to disable TF3D. My phone is an Orange branded one if that makes a difference. They use thier own ROM. I can't find a way to disable it anywhere. I have downloaded Pointui directly to the phone but I can't start the program. It isn't in programs. I have found it in my documents. Can you help.
Go to start-settings-today, under items, untick touchflo.
Thanks for that. TF3D is now disabled. Any idea how i load Pointui onto my phone now?
Download the program (which is a .CAB file) to your computer, then copy to the phone (storage card is best area)
Then, using FileExplorer, naviagte on the phone, to the location you saved it, and click on the program, it'll ask a few things, just click the left soft button.
Thanks for that. Installed it and works fine. It does seem beeter than the TF3D.
I use scott seligman's launcher on the standard windows today screen,it just add's program icon's to today screen,one tap open's any application,no sliding this thing here,flipping this there,scrolling up or down.
It's not finger friendly though,unless you have pointy little finger's,or usually use a stylus anyway,but it doesn't get much faster or less resource hungry than this simple app.
WAD from lakeridgesoftware.com is pretty incredible
let me know what you think