i have a fuze and people at saying when they get a call and put it to there ear..the screen turns off. mines doesnt
aonavy said:
i have a fuze and people at saying when they get a call and put it to there ear..the screen turns off. mines doesnt
Click to expand...
Click to collapse
good for you!
What rom are you running is it default AT&T? I do believe that mine did that when I had the default rom, it would turn itself off.
Let us know!
Thanks
I read somewhere,when you are using standart WM dialer instead of HTC one,you lose all extra functionalities. I am using MS stuff and my also doesn't turn off screen. I can use the power button for doing that manualy if I need it.
TomasNM said:
I read somewhere,when you are using standart WM dialer instead of HTC one,you lose all extra functionalities. I am using MS stuff and my also doesn't turn off screen. I can use the power button for doing that manualy if I need it.
Click to expand...
Click to collapse
same boat. Im using stock rom from att
Related
If my Kaiser goes into standby, say on the mail screen, if I hit the power button or slide the slider to turn it back on, it goes back to the today screen.
Is there a way to stop this?
You probably have an application that does this, there are a lot offering this feature.
Gah,
I have kaisertweak, phweaver and HHC installed, could it be one of those?
Password
Are you password protecting your phone? If so, this can cause the Today screen to pop-up after you resume from standby, even if you are not prompted to enter a password.
nope, no password protect - I have WIMP, I *want* anyone who steals it to use it
May it's the setting 'Today timeout:' under Settings/Personal/Today/Items...
have the same problem with my touch. idea anyone? have the HHC installed, maybe it's an option of this program?
still have this problem - driving me crazy! plz help ...
bump old thread bcuz im having this issue now too...& this seems to have never been resolved.
it never used to happen, but i just got an rma w/ a a new rom 162 instead of 157 i was running on the old phone. so i'm assuming its a "feature" set in the new rom, but its annoying. also its frustrating bcuz i cant use that "camera workaround" where you cover the camera, hit the power button to sleep it, then resume...thus im back to stuck w/ a crap camera.
any thoughts/suggestions? thanks.
evilc said:
If my Kaiser goes into standby, say on the mail screen, if I hit the power button or slide the slider to turn it back on, it goes back to the today screen.
Is there a way to stop this?
Click to expand...
Click to collapse
I have the same problem (Kaiser WM 6.1 Official. 3.28.462.1)
Any solution?
leon100 said:
May it's the setting 'Today timeout:' under Settings/Personal/Today/Items...
Click to expand...
Click to collapse
this sounds right....just uncheck the today timeout box....or set it to however long you want it to be....problem sorted hopefully
Humz said:
this sounds right....just uncheck the today timeout box....or set it to however long you want it to be....problem sorted hopefully
Click to expand...
Click to collapse
no, I have unchecked box of Today timeout, but still doesnt working.
When i resume Kaiser from standby (by press On/Off button) then always go to Today screen.
Probably need a soft reset for the shell to pick up the change in settings.
ButtonBoy said:
Probably need a soft reset for the shell to pick up the change in settings.
Click to expand...
Click to collapse
No, this step doesn't working. When I push On/Off button, all aplicaton (for ex. sms/mail) will be minimazed and I'll see only Totay screen
There is no solution?
kimosak said:
No, this step doesn't working. When I push On/Off button, all aplicaton (for ex. sms/mail) will be minimazed and I'll see only Totay screen
There is no solution?
Click to expand...
Click to collapse
I solve this problem It cause a BatteryStatus TodayPlugIn.. thanks for your help very much...
I've done a search and cannot find the information.
Basically i've removed the trayicons on the bottom of my wing. I am using battery status, but sometimes it does not lock the device automatically. Until i lock it manually first.
So i am trying to find the shortcut or link to device lock/unlock.
Any help is appreciated.
Thanks,
Well.... if you are using the Wing then, keep holding the end call button. That will lock the device. Unlock will be same as before.
Hope that helps.
shaell said:
Well.... if you are using the Wing then, keep holding the end call button. That will lock the device. Unlock will be same as before.
Hope that helps.
Click to expand...
Click to collapse
Cool. I didn't know that. lol
Why doesn't this work with my p4350???
Rewind said:
Why doesn't this work with my p4350???
Click to expand...
Click to collapse
Don't know... on the Wing you can't hold one of the buttons down to put the phone on vibration mode, either. One phone has one feature, the other one doesn't.
ivanmmj said:
Cool. I didn't know that. lol
Click to expand...
Click to collapse
LOL....yeah. I discovered it one day when i was pissed after a call. Kept holding on to the end call button and EUREKA!
shaell said:
LOL....yeah. I discovered it one day when i was pissed after a call. Kept holding on to the end call button and EUREKA!
Click to expand...
Click to collapse
HAHA, sometimes it's a good thing to loose your temper, then. lol
This doesn't work on my Wing. It's probably because I'm using TouchIT which isn't based from the TMO rom.
So i just got the Tilt last week. Been using it every day and would say that I am in pretty good understanding of how it works.
My understanding:
Screen dim is set to 10seconds - Meaning after 10 seconds of no use screen will dim (wont be as bright) this works perfectly every time
"Turn off divice if not usef for 1min" - From my understanding it should turn off the screen after 1 minute of no use and shouldnt come on unless I press the power button on the right.
This is where I am having issues. It wont turn the screen off.. it just stays at dimmed.
First let me explain how i have the phone set up since I think it has something to do with that.
I use it for phone calls, email (through Exchange), and text messaging.
Ive tested it a couple times and the screen turns off just fine if I have direct push (email feature) turned off in the Comm Manager.
However with the Direct push ON it seems to not wanna turn off... just dims.
At first I thought... well maybe it cant get email pushed to it if its turned off... but nope, if I manually turn the screen off (by pressing the side button).. and email myself.. sure enough the phone comes out of the turn off state and tells me I got an email... same deal with texts.
So I am dumbfounded. What is not letting it turn off the screen? The only thing that is running in tast manager is ActiveSync.
Thanks in advance for any help
Where do you leave your 400$+ device that it is unattended for over a minute? Mine is out, on, check mail, off, back in pocket.
it has nothing to do with being unattended... i just feel like i should be able to..
Pick it up -> Turn on -> Glance for new emails -> Put it back down.
Without having to turn off the screen every time... seems like it should do that on its own.. otherwise it would be kind of pointless to have that auto turn off after 1 min function.. right?
So... since that function is there.. and its not doing it.. that means something is wrong. so im trying to figure out what is wrong.
It could be a lot of factors so its going to be time consuming to find the exact cause of the problem. Not sure if your willing to hard reset the device to attempt troubleshooting from a hard reset with no other programs installed to rule out the ROM itself your using or if its third party software or possibly other changes/tweaks you might have made.
I know it works as it should for me with the Q-Mobile 1.2 ROM. Both the dimming and device power off setting work fine. And I have Push email enabled so activesync is always connected.
tyeo098 said:
Where do you leave your 400$+ device that it is unattended for over a minute? Mine is out, on, check mail, off, back in pocket.
Click to expand...
Click to collapse
Some of us have a life...
I have the same issue... stock ATT rom, with lots of stuff on it. I'm pretty accustomed to using the power button to turn off the screen when I'm done. All 3 tilts I've had have this issue. I know it also happened running the stock HTC rom.
I am interested in a solution if anyone has any ideas.
I believe I had the same problem. There are two places to change the dim settings. One setting is under:
Settings\Systems\Power\Advance
Another is under:
Settings\System\Backlight\BatteryPower.
At that point I would make sure all these numbers match up that way you know it will dim and shut off at the correct time. One time is to dim, the other is to shut the screen off. Hope were talking about he same problem, and see if that helps.
Punker1234 said:
I believe I had the same problem. There are two places to change the dim settings. One setting is under:
Settings\Systems\Power\Advance
Another is under:
Settings\System\Backlight\BatteryPower.
At that point I would make sure all these numbers match up that way you know it will dim and shut off at the correct time. One time is to dim, the other is to shut the screen off. Hope were talking about he same problem, and see if that helps.
Click to expand...
Click to collapse
This works for me, I set them all the same and the screen dims and turns off.
Thanks much!
xconradx said:
This works for me, I set them all the same and the screen dims and turns off.
Thanks much!
Click to expand...
Click to collapse
Welcome. I had the same trouble, as I was irritated that the screen would shut off at 1 minute. Sometimes programs or installations take longer then that and with Wifi it can disconnect. Glad I could help.
The problem is related to Activesync and Exchange direct push.
I had the same problem. As long as Activesync is connected to Exchange the phone does not enter standby.
Try disabling direct push and kill activesync and then see if it works.
I had to configure activesync to check for mail every 30mins instead of direct push to work around the problem.
If anybody has direct push and standby working please let me know. I'm sick of this workaround.
--
Titan00
titan00 said:
The problem is related to Activesync and Exchange direct push.
I had the same problem. As long as Activesync is connected to Exchange the phone does not enter standby.
Try disabling direct push and kill activesync and then see if it works.
I had to configure activesync to check for mail every 30mins instead of direct push to work around the problem.
If anybody has direct push and standby working please let me know. I'm sick of this workaround.
--
Titan00
Click to expand...
Click to collapse
Excellent.. changing the setting in both of the places mentioned above to 1minute fixed the issue.. now i have direct push and active sync on.. and it turns off after 1 min yay
Just curious, anyone have any problems with their screens turning back on after being off? I'm pretty sure this is related to my check email interval. Its not a problem for me anymore since I've been using slide2unlock, but before then Id pull my device out and all kinds of programs would be running...but I still get awakened in the middle of the night by a bright screen if I do not put my phone face down on my nightstand.
titan00 said:
The problem is related to Activesync and Exchange direct push.
I had the same problem. As long as Activesync is connected to Exchange the phone does not enter standby.
Try disabling direct push and kill activesync and then see if it works.
I had to configure activesync to check for mail every 30mins instead of direct push to work around the problem.
If anybody has direct push and standby working please let me know. I'm sick of this workaround.
--
Titan00
Click to expand...
Click to collapse
No problems here. I'm using my own ROM however.
ajmoncrief said:
Just curious, anyone have any problems with their screens turning back on after being off? I'm pretty sure this is related to my check email interval. Its not a problem for me anymore since I've been using slide2unlock, but before then Id pull my device out and all kinds of programs would be running...but I still get awakened in the middle of the night by a bright screen if I do not put my phone face down on my nightstand.
Click to expand...
Click to collapse
I've had that. Mine's related to SPB backup which runs at 3AM. Also, pressing any key brings this device out of standby as opposed to my Hermes where only the power button would do this. I don't really like this "feature" much as I now need to have keylock enabled to keep the phone from waking up.
Sleuth255 said:
I've had that. Mine's related to SPB backup which runs at 3AM. Also, pressing any key brings this device out of standby as opposed to my Hermes where only the power button would do this. I don't really like this "feature" much as I now need to have keylock enabled to keep the phone from waking up.
Click to expand...
Click to collapse
Hi:
I hope I understood your issue correctly.
If you want phone to ONLY wake when you push the power button, you need to go to Start/Settings/System/KeyLock There, select the first option, which is lock all buttons except power button.
titan00 said:
If anybody has direct push and standby working please let me know. I'm sick of this workaround.
--
Titan00
Click to expand...
Click to collapse
As stated in my previous post I have Direct Push and Standby works correctly for me. I'm using the Q-Mobile 1.2 ROM.
Chrushev said:
Excellent.. changing the setting in both of the places mentioned above to 1minute fixed the issue.. now i have direct push and active sync on.. and it turns off after 1 min yay
Click to expand...
Click to collapse
PsyOpWarlord said:
As stated in my previous post I have Direct Push and Standby works correctly for me. I'm using the Q-Mobile 1.2 ROM.
Click to expand...
Click to collapse
That is really strange. I'm using Dutty V3 and just tried activating Direct push. Setting Backlight and power timeout to one minute. After leaving the device for one minute the screen dims but does not enter standby.
If I kill activesync it does enter standby but Direct push stops working.
--
titan00
what would make it not work. this happen to me on to different roms. the lights light up thats it. thank you.
tmobile wing
prelude91sit said:
what would make it not work. this happen to me on to different roms. the lights light up thats it. thank you.
tmobile wing
Click to expand...
Click to collapse
You need to provide more details as to which roms you have tried...
I don't recall any of the roms posted here have issues with the talk button.
yours v3.0 biggy and aserg's
The Talk button...which is on the touchscreen... is not working?
or
the Send button.. the physical button on the phone..is not auto-redialing?
sorry the physical button. when im at the today screen and i press the talk button nothing happens, wing just lights up. if the phone screen is up and i press the button it will work. i like being able to get to the phone screen by just pressing the talk button
Broken phone? Try a reflash to OEM and see if the problem persists.
it's not broken...
it's the dialer that ur using.
can u give me more detail?? thank you
prelude91sit said:
can u give me more detail?? thank you
Click to expand...
Click to collapse
I such hear the first time. There should not be such problems. Search for the program which to you spoils
If the actual hardware GREEN KEY is the one that doesn't work ... and it doesn't work under various ROMs ... it sounds like most likely its the actual button that's broken and not a software issue.
maybe you should try to have your phone replaced under warranty?
prelude91sit said:
yours v3.0 biggy and aserg's
Click to expand...
Click to collapse
Okay,
So your saying that this did not happen when you were using the original rom.
Then try and reflash back to the original tmobile rom.
Please report back your findings.
he's saying the problem is he pushes the "Send" key.. and it does not automatically dial the phone number.
but.. if the virtual phone or dialer screen is open, then pushing the send key does initiate the call.
if it was the sensor under the key... then it would not light up.
i'm assuming it's because of the dialer.. maybe needs a registry tweak to fix it how he likes.
it doesn't work if you push the send key twice?
also... if you hold it for too long, the dialer will not initiate...so try only pushing it and not holding it down.. :-/
So I get this with some roms and not others, but in some instances when I press the side button to turn off the screen, it turns off for a split second them turns on again without the lock screen on.
For instance after ending a call I manually turn off the screen so I can put the phone right back in my pocket, but the screen just comes back on. Why does this happen? And how can I fix it other then change the rom to one that doesn't do it. Thanks
Sent from my SAMSUNG-SGH-I897 using XDA App
I've never had this issue but You said it happens on some roms and not others right? Why not just Flash a rom you know that doesn't happen with?
studacris said:
I've never had this issue but You said it happens on some roms and not others right? Why not just Flash a rom you know that doesn't happen with?
Click to expand...
Click to collapse
because that's not in the spirit of modding the phone imho, you know, trying new things, working the kinks out, etc.