The last weeks i suffered more and more hangs of my tytn II,
i decided to do a hard reset to clean up the system.
i did this, however, when the system rebooted it keeped hanging on:
"The device is erasing the memory, please be patient"²
i am using windows mobile 6.1 (dutch) from vodafone
i never tried to install custom roms
²: for easyness, translated the message into english
obviously i cant establish a connection to my pc without WM starting up...
does someone have expierenced this before, or knows a solution?
Stefan
Problem solved...
solution:
enter the SPL mode by pressing the power and camera buttons, and press the reset button with the stylus...
plugin usb, and flash your branded HTC rom
Related
I installed the HTC Kaiser DLL replacement installer and then restarted my device. Now when it boots it won't go past the my info (owner info) screen. If I try to do anything at that screen whole device goes black and frozen I have to reset again. Anyone having this similar problem or know how I can fix it? I would really appreciate the help!
I was running WMobile 6.1 with the RUU_Kaiser_HTC_WWE_3.03.405.0_radio_sign_25.70.40.02_1.64.06.04 ROM
Once or twice somehow it got to the unlock screen but I can't get back there now I don't know how it got there the first times either just reset after reset.
Thanks
I was able to enter bootloader and reflash the rom. Held down camera button and used the stylus to push the little reset button next to usb port. Then ran rom updater as normal
I tried to flash my Qtek 9100 to WM6 using the flashing tutorial on this site.
I followed the steps in the tutorial. I downgraded to Buttons ROM, unlocked the CID, and then I flashed the 3.08 IPL/SPL in stead of the T-Mobile 2.26.
Then I tried to use farias kitchen to make a WM6 and flashed it to the phone.
Everything seemed to go smoothly, but when I tried to start the phone after flashing the 3.08 and farias' to the phone, the phone just hangs at the startup screen with the picture of the beer glass and the coloseum.
I've tried to downgrade to Buttons firmware and I've also tried the Xda_MiniS_LaunchROM, but it doesn't help. I'm still stuck at the welcome screen.
Is there anything I can do, or have I bricked my phone for good?
flash an original qtek rom to your phone then try to flash the rom again
Your phone isnt bricked (yet)
I've done that, but it doesn't help. Still just hangs at the SPL/IPL screen.
Solution (worked for me)
I found a solution while looking trough the forum
I was facing the same problem on a G3 phone
this is copied from that link except the link to MTTY.exe is different (previous one doesn't work
See (http://forum.xda-developers.com/showthread.php?t=307332)
1- I tought that a SD backup was needed, and yes it is. But u can use your own phone and your own SD to do it.
2- Get a clean SD card (in qtek 9100 / Htc Wizard case is MiniSD) with 128MB (some people say 64MB, but I personally used a 128MB, maybe a 64MB is enough)
3- Kill (task manager) wescomm.exe (this is related with activesync installed on your PC). Insert the blank SD card on the phone.
4- Get your phone in bootloader mode. Like this : Phone powered off, press Camera button + Power On, will enter in bootloader mode (RGB screen).
5- Now connect your USB cable to your phone. And start MTTY.exe ( http://forum.xda-developers.com/showthread.php?t=231190 ). After open, on Port selection, choose USB and press OK. A window will open with a blank sheet.
6- Type "r2sd all" and hit enter... wait to the end (at end shows "cmd>"). On your phone screen u can follow backup progress... small bar will appear down the RGB screen.
7- Power off the phone (or remove battery), enter bootloader mode (camera button + power on) and this time RGB won´t appear right away. Will ask if u want to "download SD image", press voice dial button to agree, and writting will begin. Wait to the end. Power off and power on normally. Now your phone should be working ok. Not even needed to reflash the phone after this.
I hope this helps you out
It worked for me (and other people if you look at the forums)
That solution was already known and was, in fact, discovered for the Wizard by a guy called 'Drugstore'
But what really matters is that this procedure only works if the device is already CID unlocked.
cheers
MDA Vario freezes at 2nd boot screen
I have the same problem. I flashed wm6.1 according to tutorial on this side. everything worked fine, until the time I uninstalled some application. after that my Vario froze. after soft reset it stopped on second screen (the one with info), and so it is anytime I try to reflash to other ROM. everything works fine until the time it shoud reboot.
I found this thread and tried the thing with backup image. everything worked, copying image to the phone ended with success. so I turned off the phone and started it again. but now, after all, I'm just back at the beginning
can somebody help me out with another solution??? pls.....
Try mtty
grinmustaine said:
I have the same problem. I flashed wm6.1 according to tutorial on this side. everything worked fine, until the time I uninstalled some application. after that my Vario froze. after soft reset it stopped on second screen (the one with info), and so it is anytime I try to reflash to other ROM. everything works fine until the time it shoud reboot.
I found this thread and tried the thing with backup image. everything worked, copying image to the phone ended with success. so I turned off the phone and started it again. but now, after all, I'm just back at the beginning
can somebody help me out with another solution??? pls.....
Click to expand...
Click to collapse
maybe trying mtty
task 28
task 28 55aa
then upgrade again
this is not the steps as is... so search the way
+ Que PPC said:
maybe trying mtty
task 28
task 28 55aa
then upgrade again
this is not the steps as is... so search the way
Click to expand...
Click to collapse
I didn't have chance to try this.... My Vario is already dead... Probably is my fault... As far, I wasn't able to flash to official T-mobile ROM, I did a backup copy to a SD card on my friends phone, and then tried to copy the image into mine... I'm afraid I destoyed bootloader this way After I turned off my phone first time after flashing, it didn't start again.... It doesn't react even to wall charger... Nothing... Just dead Vario
Get a powerfull charger
grinmustaine said:
I didn't have chance to try this.... My Vario is already dead... Probably is my fault... As far, I wasn't able to flash to official T-mobile ROM, I did a backup copy to a SD card on my friends phone, and then tried to copy the image into mine... I'm afraid I destoyed bootloader this way After I turned off my phone first time after flashing, it didn't start again.... It doesn't react even to wall charger... Nothing... Just dead Vario
Click to expand...
Click to collapse
There is a post that suggest that somebody revives his batt with a wall charger, maybe is your batt... is dead... or your s is bricked.
when i upgraded my xda2 from wm2003 to wm6 it was working fine but i didn't have 30.53 free storage so i use ather90 Hima DOC Partitioner and i did get 30.53 storage memory but after few minutes while i was installing some 3rd party softwares the device got stuck i tried to hard reset it but it wont give displaymad: backlight wont open only shows imate on black screen)and when i tried to upgrade my rom i got this error "DOC VERSION IS ERROR" in Bootloader mode
anyone having this error pls tell us about it and how to solve this error
sorry for being a complete noob....
hmm werid, which bootloader version do you have?
try do a hard reset by pressing Camera+Record button and reset
the version of bootloader is 1.06 and i have tried many times to hard reset it but when i select no yes yes nothing happens the screen go completely black and windows does not start and heres the best part when i remove battery for a day
and then upgrade new rom the device works fine until it gets hang and after hang when i try to soft reset or hard reset the device nothing happens the os wont start what so ever i try to do.I think i have done something wrong with DIsk on chip formating for getting 30.56 free storage and i did get 30.56 free storage with a "doc version is error"
try to reverse the process hopefully that should do it, or i'll consult buzzlightyear
yes i have revesed the whole process by upgrading to wm6.1 sade and then i reversed the whole process by running ather90 Hima DOC Partitioner and have done everything exactly so i again got 14.60 factory default storage but the device again got stuck after some hours of use and when i again soft,hard reset it nothing happens now i have to again upgrade the rom and wait for the windows to load so that i can again comeback to wm2003 (the most weired thing is why device is not affected by hard reset means nothing happens when i do a hard rest after the device stuck)
one more thing i can only see 14.60 storage in start>>settings>>system>>memory but i don't get access to 14.60 storage means i cannot see its root or path in file manager.
ok here i am posting a screen shot of its missing from file manager.
Hello.
I'm opening this thread because my Diamond seems to be diying and I wanted to know if someone got an idea.
Yesterday, my phone suddendly rebooted without warning after a month.
I thought It was nothing, but the phone started to reboot allthe time. The phone boot, show my operator logo (befor the winmo loading screen), and then reboot again, again and again.
I decided to do a little Mtty maintenance and reflash (from internal memory). The phone reworked for a couple of hours and restarted to do a reboot loop. I thought the rom I was using was in fault.
Re Mtty maintenant and flashing the phone with mu Prange stock rom. Several hours léter, the phone restarted to boot.
So where I am ?
If I let the phone off (like a night), he will launch windows and will works between a couple of minutes from a couple of hours befoor rebooting. If I put the phone in bootloader mode It won't reboot and will wait with his beautiful rainbow screen. But if I leav the bootloader mode, reboot over reboot, yay !
When the phonedecide to boot completly,it's a regular soft reset, not a hard reset.
Did anyone here have an idea ? Thanks !
How often did you flash since you have your diamond ?
Try to reflash a radio. Maybe your flash memory is dead =/
It sounds like the rom image might be corrupted - I had this problem with a 28003 rom I tried in which the phone would take a hard reset - boot fine - reset and reload fine... and then whenever you tried to restart it after that it went into a boot loop that eventually came up with a screen saying "the phone cannot boot because of uncertified software or incorrect shutdown procedure"
I solved it by putting the phone into bootloader (switch on holding both power key and volume down key) - connecting it to my computer and reflashing it. It DOES NOT need a activesync connection in this mode but you do need the Hard-SPL on the phone (im running olinex 1.40)
hope that helps
Jemma
Thx JoOos and Jemmauk.
But I already tried to reflash the Radio and the rom Image.
I Tried 3 different Rom images.
One orange official , aztor re-evo and an another one.
But the phone don't display any errors. It will just never stop to reboot without saying a thing.
Same problem in a different thread
Have a look at http://forum.xda-developers.com/showthread.php?p=5279740.
Hello everybody,
I have a bad problem with my diamond, yesterday I tried to update my Gen.Y 5.3 ROM with Memo 2.5.1.0 ROM.
After flashing, my diamond will restart, as always, but the first time it makes an error with trying install something like "windowslive.update".
After this error my device was blocked.
I had remove the battery and restart it, nothing to do, it remaing blocked into first black screen so you see the ROM version.
So I have make hard and soft reset but nothing.
So I have launched bootloader with volDown+Reset and reflash Diamond with Gen.Y 5.5, now my device starts (not always) but after a little second it blocked again.
I need to remove the battery, but always the ROM reinstall himself with reset of contacts,SMS and recalibrate e reinstall all programs...
anybody have any idea what can I do?