i need some help here...
i finally have fond a Generik NL Rom
but it wont flash
i have done everything from back up my old vodafone one to hard SPL
but when i put de Kovsimg.nbh on my to fat32 converted micro SD
and open the bootloader it gives de tri-colour screen and says:
in the red: Kovs110
spl-0.72.OliNex
MicroP1-787
MicroP2-707
and in the white is goes direct to ''Serial''
do any one know how to fix it?
Hi,
My Trinity (s300+) stops working yesterday night : it was buggy, so I decided to do a soft reset, but then after it starts I get the splash screen for 1 second and it turns off. I tried a hard reset but nothing change.
I tried "splxploit" in order to have a HardSPL installed and then to flash a ROM through a SD but the problem is that the update looks OK but is not stored in the phone:
- when I entered the bootloader I had :
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
- after running "splxploit" I had on the screen:
TRIN100
IPL-USPL
TRIN100
SPL-1.20.Olipro
- after doing a soft reset and reentering the bootloader I have again:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
Is there something wrong with what I am trying to do, or should I start considering that it may be now a brick ?
Thank you for your help,
Mika
mikahtc2 said:
Hi,
My Trinity (s300+) stops working yesterday night : it was buggy, so I decided to do a soft reset, but then after it starts I get the splash screen for 1 second and it turns off. I tried a hard reset but nothing change.
I tried "splxploit" in order to have a HardSPL installed and then to flash a ROM through a SD but the problem is that the update looks OK but is not stored in the phone:
- when I entered the bootloader I had :
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
- after running "splxploit" I had on the screen:
TRIN100
IPL-USPL
TRIN100
SPL-1.20.Olipro
- after doing a soft reset and reentering the bootloader I have again:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
Is there something wrong with what I am trying to do, or should I start considering that it may be now a brick ?
Thank you for your help,
Mika
Click to expand...
Click to collapse
Hi,Mika maybe I can help u to upgrade ur SSPL,busy now maybe I will send to u later,K
Try here,maybe this can help u.
mikahtc2 said:
Hi,
My Trinity (s300+) stops working yesterday night : it was buggy, so I decided to do a soft reset, but then after it starts I get the splash screen for 1 second and it turns off. I tried a hard reset but nothing change.
I tried "splxploit" in order to have a HardSPL installed and then to flash a ROM through a SD but the problem is that the update looks OK but is not stored in the phone:
- when I entered the bootloader I had :
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
- after running "splxploit" I had on the screen:
TRIN100
IPL-USPL
TRIN100
SPL-1.20.Olipro
- after doing a soft reset and reentering the bootloader I have again:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
Is there something wrong with what I am trying to do, or should I start considering that it may be now a brick ?
Thank you for your help,
Mika
Click to expand...
Click to collapse
Mika,please download from here http://forum.xda-developers.com/showthread.php?t=293632
Down load SSPL-Trin.Zip and unzip it,or try to use "WIN RAR" software to unzip,copy SSPL-Trin to ur device,click on it bootloader will prot out,plug in cable wait for Sync(Screen will show "USB"),download rom in progress,follow instruction untill finished,pull out cable soft reset ur device
Good Luck,Mika
From Eddie (Malaysia)
Email : [email protected]
Thank you for your answer.
Unfortunately, my problem is that I cannot run a program on my Trinity since I cannot start it anymore (I just got the splashscreen, and it turns off).
I can also start with the bootloader mode and this is why I tried the 'splxploit' .
Hope there is still something to do to heal it
Mika
mikahtc2 said:
Thank you for your answer.
Unfortunately, my problem is that I cannot run a program on my Trinity since I cannot start it anymore (I just got the splashscreen, and it turns off).
I can also start with the bootloader mode and this is why I tried the 'splxploit' .
Hope there is still something to do to heal it
Mika
Click to expand...
Click to collapse
Hope this will help ur device wake up again.
1.)RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.30 .11_108_Ship.exe
Down load this and extr it,u can see few files and look for the file name RUU.xxx.NBH file,and just rename it as TRINIMG.nbh
2.)now you must use Mini SD,format it to FAT 32,with no Volume Label(go to folder right hand click and format it to FAT 32 at FAT colum,after that erase the volume label etc "KINGston"farmat card.
3.)copy file TRINIMG.nbh to your Mini SD Card,now ur screen blank right?slot in MiniSD,now boot from card,you will see "loading"follow by "checking" then it will prot out some like Boot file checking at you screen,press power botton to start boot from card,plug in your cable before start,wait for completed,soft reset you device,now ur device wake up again.
*** if want to boot win 6.1 new Rom,now you can follow previouse format that I already sended to you,any problem please reply to my mail please.Mika
I like to see ur device wake up again.
From : Eddie
Thank you again Eddie,
There was no file attached to your message.
I tried anyway with another ROM package, rename the nbh file to TRINIMG.nbh, copy it to an SD card formatted FAT with no label. I start the bootloader "Camera Button" + "Power button" + "Reset" button, but only get:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
Serial
Nothing about "loading" or "checking" ... :-/
When you said "boot from card" in your message, did you mean entering the bootloader as I did ?
Thank you for your help,
Mika
mikahtc2 said:
Thank you again Eddie,
There was no file attached to your message.
I tried anyway with another ROM package, rename the nbh file to TRINIMG.nbh, copy it to an SD card formatted FAT with no label. I start the bootloader "Camera Button" + "Power button" + "Reset" button, but only get:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
Serial
Nothing about "loading" or "checking" ... :-/
When you said "boot from card" in your message, did you mean entering the bootloader as I did ?
Thank you for your help,
Mika
Click to expand...
Click to collapse
Hi,Mika that I found that you format to FAT(Should format to FAT 32)just at the colume of FAT click down the arrow to select FAT 32 when u right hand click and look for format,and here is the Asia Original Rom I found
http://rapidshare.com/files/46816571...1_108_Ship.exe
Extract RUU.Signed.nbh rom file and rename it to TRINIMG.nbh,copy to Mini SD Card (Your Mini SD Card can not have any file in there,Except TRINIMG.nbh file only),on bootloader,plug in Charger and slot in ur card,screen will show u previousely what I'am show u press power/on-off botton and start untill step by step completed
Keep trying Mika
Good Luck
From : Eddie
mikahtc2 said:
Thank you again Eddie,
There was no file attached to your message.
I tried anyway with another ROM package, rename the nbh file to TRINIMG.nbh, copy it to an SD card formatted FAT with no label. I start the bootloader "Camera Button" + "Power button" + "Reset" button, but only get:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
Serial
Nothing about "loading" or "checking" ... :-/
When you said "boot from card" in your message, did you mean entering the bootloader as I did ?
Thank you for your help,
Mika
Click to expand...
Click to collapse
Your set is it ok
From : Eddie
to Mika
Hi Mika and all,
I have same problem as u, on my Trinity!
How was a solvent?
thanks for your answer
I can't flash or anything(get in 3 colour bootloader) for my P3600i.
I mean it is work but sometimes it hard reset by himself or freeze.
i just can get in USB or serial mode n write Ver.1.20 (with blank screen n just Serial or USB when i get in my cable)
radio ver.1.11
rom ver.1.11.00 WWE
So i decide to flash it.But when i want to get in bootloader mode,it freeze n hang.
n so when i run the ROMUpdateUtility.exe from [P3600i] HardSPL v1.1 files,just same result from anytype of this rom,when i try to flash
i must reset for it.
I had tried copy [P3600i] HardSPL v1.1 into memory card (SD or MMC) then run EnterBootloader.exe from P3600i explorer,just the same result.
Any idea?
i dont know what i must do anymore now.
Help pls!
Thx very much
hmmm......now it was dead
i run the unbrick.bat from
http://forum.xda-developers.com/showthread.php?t=308691
but not thing happen.
# ./splxploit -F TRIN_SPL105.nb
=== Trinity splxploit by pof - pof[at]eslack[.]org
=== Exploits stack overflow on HTC Trinity SPL
[] SPL file: TRIN_HardSPL.nb
stop at this state.what must i do now?
before doing this my P3600i still work (yea,on that condition what i say bfore)
now only in serial mode.if plug in my cabel --> USB
n there is V1.02 on mid bottom.
hiks...pls help!!!
Don't know what to say. I have a P3600 not a P3600i. And they are a bit different. Tried to enter in bootloader using: on/off button + camera + reset (presed with the stylus)?
Hello all,
I have P3600.
ROM version: GELLY
ROM date: 11/17/07
Radio version: 1.38.00.11
Protocol version: 32.71.7020.12H
Out of the blue it started freezing. After a number of freeze and power cycle recoveries, it ended up booting once over 10 boots. The other boots end up with fancy doted screens (dots all over the screen but the screens are more or less undestrandable) or freeze in the last screen prior to windows home or in the boot up screen.
I can put it in boot loader mode and it sais:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.000
If booted properly, it will not be recognized from windows or active sync.
If in boot mode, to make the USB work I have to put the cable in and out and in again and it wrights USB on the white strip.
Some times even the boot loader screen is dotted (and then nothing can be done).
When succefully in boot loader mode, I try to use HardSPL (from http://forum.xda-developers.com/showthread.php?t=299659) or the factory ROM update. It turns the screen to the loading % mode, but imediatly the update program reports communication failure and prompts to exit or to recover.
Removing the SD card makes no difference
Using mtty.exe always leads in "Can not open USB port" (in boot loader mode - USB)
Can some one guide me on what to do (step by step preferably) to try at least to load the original ROM?
Any idea or past experience feed will be highly appreciated.
Sincerely
T.
Hi guys, yesterday a friend gave me his hd7 to see if i can fix it, the thing with the device is that when you press the power key the device stays on the htc green letters and white screen, and if i do the combination of keys to do a restore/reset the phone goes to the screen that's red,green,blue,white and it says
PD29110 SS-BC (4K)
SPL-5.12.2250.0(135916) MNG
MicroP (LED) 0x07
TOUCH S1(v1.7,#1624)
SD SANDISK 15193MB
Partition Info-v211v413
and at the bottom is says Serial
and if i plug the device to the computer it changes to USB
im new to windows phone
so if anyone can help me ant tell me if i can restore this device i would really be thankful.
daworship said:
Hi guys, yesterday a friend gave me his hd7 to see if i can fix it, the thing with the device is that when you press the power key the device stays on the htc green letters and white screen, and if i do the combination of keys to do a restore/reset the phone goes to the screen that's red,green,blue,white and it says
PD29110 SS-BC (4K)
SPL-5.12.2250.0(135916) MNG
MicroP (LED) 0x07
TOUCH S1(v1.7,#1624)
SD SANDISK 15193MB
Partition Info-v211v413
and at the bottom is says Serial
and if i plug the device to the computer it changes to USB
im new to windows phone
so if anyone can help me ant tell me if i can restore this device i would really be thankful.
Click to expand...
Click to collapse
Try the coldcard method http://forum.xda-developers.com/showthread.php?t=1597837