My Touch Diamond has stopped ringing, The setting is for ring and vibrate with a standard ringtone, which works when played from the settings page.
When the handset rings it vibrates but won't play the ringtone.
If the ring settings are changed to just ring without the vibrate, the screen lights up showing the incoming call but won't ring. I've done a soft and a hard reset and restored a previous back up with no joy. Is it broken or is it a software issue.
I haven't been playing with the rom. This just a standard handset.
Suggestions ?
StrangeSpy4 said:
My Touch Diamond has stopped ringing, The setting is for ring and vibrate with a standard ringtone, which works when played from the settings page.
When the handset rings it vibrates but won't play the ringtone.
If the ring settings are changed to just ring without the vibrate, the screen lights up showing the incoming call but won't ring. I've done a soft and a hard reset and restored a previous back up with no joy. Is it broken or is it a software issue.
I haven't been playing with the rom. This just a standard handset.
Suggestions ?
Click to expand...
Click to collapse
Try a hard reset but don't restore from backup. This backup file will only replicate your current state. Just do a hard reset then test.
try converting all the files you want as ringtones from mp3s to wav files. been good for me winff is a good program to use.
I had the same problem.
Press and hold the volume up button and then quickly press left arrow.
You will go to another volume control screen.
Press and hold the volume up button and the problem is solved
Related
I have a problem with my HTC Kaiser. If I set it to vibrate only for a while and then switch it back to full sound and vibrate it appears not to work. The display shows that I have sound and vibrate selected but if the phone rings I get vibrate only and no sound. A reset cures it... It is the same regardless of clicking the volume icon or using HTC home to set it.
Anyone else got this?
R
Hmmm - large chance that this may be user error. Found that the phone volume was 0 - which would explain it!
R
My O2 XDA Ignito (Touch Diamond) has stopped ringing. No ring or vibrate on incoming calls, despite these being enabled. Selecting to change the ringtone gives me a preview which the sound works fine on. No selected ringtone will work though. It doesn't work after a soft reset.
Didn't stop working after anything other than normal use. Have the standard ROM and Slide To Unlock and a few other programs but otherwise pretty standard.
Anyone know of a quick fix avoiding a hard reset?
Im not sure about the Ignito but i had the same on my Orange Diamond and it turned out, quite simply, to be the ring volume setting in the settings menu. Scroll all the way along to the last but one tab and its under the sound settings. Ive noticed that mine has a tendency after while to set itself to zero, it seems to be after its been set to silent for a period of time!
Hi,
I have been having this problem for the last couple of days, for some reason the volume of my ringer has dramatically decreased to the point where i can't hear the phone ring when it's in my pocket (wasn't the case before). When i try to play the ring tone (it's a wave file by the way) using the media player the volume is normal and very loud, the same applies to when i play it from the settings->sounds¬ifications the volume on the ring tone is perfect, but when i receive a phone call the ringer volume is cut down by more than half, i checked the ringer volume and it's set to the max, I also did a hard reset then restored my files using the sprint backup but the problem didn't get fixed, I tried using a different ring tones and the same happens. any help would be greatly appreciated.
There are three volume controls: System, Ring and In call Volume.
Have you checked the System Volume?
If you press up on the hard volume key, you'll see arrow on the top right to switch to the next vol control. Check there.
HTH
ringtone problem
yea all 3 volumes are set to the max level
ringtone volume problem
the phone has the original stock rom from rogers (canada) hope this helps in any way
Have you got any profile managers installed (G-profile, Phoneweaver etc)?
ringtone volume problem
no i dont have a profile managers installed... so i just noticed that when the phone start ringing and i dont pick up, a second before the phone stops ringing the volume of the ringtone increases to the normal level (then stops ringing), the increase of the ringtone volume happens for like a split second after the caller hangs up and the phone stops ringing. hope this helps in any way. Thank you
Sounds like you have a Ringtone delay problem, there are a couple of solutions.
1. Disable HTC dialer (and use the Winmo one instead), can be done using Advanced Configurator 3.3.
2. Try the CAB I've attached, remember to only use WAV as ringtone though.
I would also recommend adjusting Call Forwarding timing to 30seconds. Settings/Phone/Services/Call Forwarding and get settings.
Disabling the HTC dialer is probably going to be the best solution as the HTC dialer is a hungry resource eating monster but I would just try the CAB and adjusting Call Forwarding time. There are some other REG setting as well but I never found them useful.
Hey folks any idea on this?
I've had my Diamond for just over 12 months until now ring tone has worked fine when i get an incoming call but now it's stopped working. I usually have it set to "vibrate then ring" but now it just vibrates, i've tried all the options including just plain and simple "ring" but to no avail. Interestingly when i preview it when i've made a change it plays the ring tone for incoming call fine so the speaker must be ok. I've also changed the ringtone played as well but has the same net result.
any thoughts welcome
Press the volume button on the side of the phone.
There are two tabs [Ring] and [System]
Make sure [Ring] is not set at silent
I had the same problem and that was the cause. Just did it for no reason and still does it periodically. At least I know what to do to fix it now
Viffer800 said:
Press the volume button on the side of the phone.
There are two tabs [Ring] and [System]
Make sure [Ring] is not set at silent
I had the same problem and that was the cause. Just did it for no reason and still does it periodically. At least I know what to do to fix it now
Click to expand...
Click to collapse
Spot on mate!! Many thanks for that as you say no idea how mine came to be on silent for Ring either. Thanks again
It will not make a sound whatsoever! Everything I try, it only vibrates. I do not have a single option for vibration enabled! I've tried changing various settings through the Settings/Sound and Display submenu, and I've even went into the SMS/MMS application and see nothing in there that is set to vibrate. I've tried my phone in Silent, and it's Silent. I've tried it in Vibrate, and it's Silent. Yet, when I up the volume to max, it vibrates. Anything between Vibrate and Max Volume, the phone vibrates. Anybody have any ideas?
Have you checked to see if theres a notification/text ringtone enabled? It's possible to set the ringtone to "Silent," while having all of your volumes turned up.
If that doesn't work also try a factory reset
from the initial messaging screen click the menu button, settings, scroll to the bottom, there is a notifications settings section, make sure you've got a ringtone selected in there & if you dont want the vibrate in addition, uncheck vibrate.
The ringtone is set to tweeters and the vibrate option is not ticked.
Sent from my SAMSUNG-SGH-I897 using XDA App
this is a bug I have had the same problem. I think it's when you get a text while your talking on your phone, but i'm not sure 100% But if you shut your phone off and turn it back on it will fix itself until it wants to do it again
The same thing as happening to me I shut it off and on several times and it still doesn't work help plz i have also uninstalled the music player and replaced it with another android music player maybe that's the problem?
Sent from my SAMSUNG-SGH-I897 using XDA App