Problem after upgrading with TomTom - 8125, K-JAM, P4300, MDA Vario Software Upgrading

Moinsen,
I`ve got a Problem. I updatet my XDA Mini S G4 with Hard SPL to a german wm 6.1 rom. My problem after that ist, that i can`t activate tomtom maps now. I installed it like on every other phone too. TomTom 7.915...., than I activate the map with easyusetool. But the xda says that the map is not activatet and shows me the device-id, i`ve take for the activation. Is it because of the hard spl? or what is my fault. I Installed tomtom on three other xda`s (terra and mini s original rom) and it run perfektly, only on this with the hard spl there is a problem, what is the solution?
Please help me fast..
Thanks

Related

Destinator v2006

To all
Somebody already installed Destinator version 2006 in a XDA II using WM 2005
The WM2005 is giving error type 2577 or OS(351)
thanks
Ummm...this is the Blue Angel forum, and I still have no idea what you are asking .
TheLastOne said:
Ummm...this is the Blue Angel forum, and I still have no idea what you are asking .
Click to expand...
Click to collapse
The Destinator is e navegation software
www.destinatoreurope.com
If you want help with with WM2005 on a Himalaya device, I would recommend asking at the Himalaya forums, not here, as the Blue Angel has no WM2005 yet.
TheLastOne said:
If you want help with with WM2005 on a Himalaya device, I would recommend asking at the Himalaya forums, not here, as the Blue Angel has no WM2005 yet.
Click to expand...
Click to collapse
thank you
Hello,
I have installed the last version of Destinator (5.1.65) on a Himalaya running Windows Mobile 5 and I didn't have any errors.
But I had a lot of trouble connecting the Bluetooth GPS and configuring the COM port. I recommend to read http://forum.xda-developers.com/vie...0&postorder=asc&highlight=destinator&start=25
As far as I know since 05/09/2005 and thanks to almighty buzz_lightyear you can upgrade Blue Angel to, see http://buzzdev.net/index.php?option=com_simpleboard&Itemid=59&task=listcat&catid=3
I have Destinator PN as well and have problems with it on WM5. The install fails running from Activesync or by manually copying the cab files to my SD card and running from there. I managed to get it to run by restoring files from a backup i had. But i cant connect to my bluetooth gps. Under WM2003SE i was connecting to com port 6. i tried what WC posted with the tomtom patch for com 6 but it still wont work. Anyone with any ideas? Thanks
OMG!! Where's the moderators? isnt that the moderators job is to moderate every single thread here..
Any live moderators here who can move this thread to its proper place..
Destinator PN running WM5
Hi Guys,
Just installed Destinator PN to my BA running WM5. Installed OK and running sweet.
Anyone having installation error - processor or OS type error. There is a solution. Locate the file default.ini in your DestinatorApps folder. Double click on it , it should open with Notepad. Scroll down to the Platform section and insert this line P2577v351=ARM save and close. Then try installing your software from the Destinator Console.
Have fun.
@tcmg1666, what WM5 rom version are you running? I have mamaich's 2nd patched rom and Destinator's install has always failed for me. I'm going to try what you suggested now and see if it works.
Edit: I have just hard reset and still cannot complete Destinator installation. The Destinator install program will install Destinator English but fails on the rest of the package. I am able to install the TextToSpeech part ok. tcmg1666, I would really appreciate if you could tell me what rom you are running and how your install went. Also what version of Activesync are you running? I am using 4.0 build 4343. Thanks
Destinator PN with WM5
Efjay, I am running with Maimaich BA_WM5_Patch2. My Rom version 5.03.02WWE, Radio 1.13.00. I am using Activesync 4 build 4343.
I am sorry to hear that you are having problem with your Destinator PN installation. My installation went smoothly from the Destinator Desktop Console. I did not have to hard reset after the installation. Just launched Destinator on the device and it executed straight away. Destinator found my wired GPS straight away. I have a Seido Car mount with wired GPS, it worked beautifully.
Can you tell me what sort of error on installation?? Glad to help if I can.
Did you get the 'Unknown Processor type or OS type??
@tcmg1666 thanks for replying. My problem is this: when I install from the console it will look like the install has finished. I get the prompt to check my device. On the phone I will get 2 prompts; the first to install Destinator English will succeed. the second prompt will be to install Destinator Apps; this will try to install then give me the message installation was unsuccessful. As I said I tried a hard reset and still get the same result. I don't get any other errors. I can install the TTS engine with no problems. I have also tried reinstalling the console. Nothing has worked so far . I did try what you suggested as well. Any ideas? what version of destinator do you have?
DEstinator PN with WM5
Efjay, sorry to hear of your installation problem.
I am stumped. I am running Destinator PN version 5.1.118 in my Blue Angel.
May I suggest you try and remove Destinator from your device and do a hard reset and then try to re-install Destinator afresh in Main Memory and if you are sucessful, the Maps can be installed in your storage card. Apart from that I have run out of idea. As I said I did not encounter any installation problems on my device.
tcmg1666, I am running (under 2K3SE) version 5.1.65. I bought it from Routeplanners.co.uk around July. Seems I have a later version than yours which you would think is more compatible. Is yours the European version? Maybe the version number is the clue as to why its not working and Destinator need to update the software. Thanks for all your help.
Edit: just to add i have also tried reinstalling the console on my pc, hard resetting the BA, deleting all folders and registry entries and install still fails.
Destinator PN
EfJay, I am running Destinator PN Australian version. I got it from www.pressdigital.com.au .

Kaiser 6.1 Rom German Originial

HEy Guys after Flashing the 6.1 Rom from the HTC Website i cant type Umlaute (äöü) anymore on my keyboard
on 6.0 i had to press o then fn+space
but now it doesnt works anymore
how can i activade that again or is there a fix aviable
thankxxx scilor
Hi,
strange behaviour; at my Kaiser it's working after the upgrade. I think you have to flash again.
ramsesp
I think a Programm does it
i must find out which
After a fresh Hard Reset its working, but when put my Sprite Backup on it ****s it up (registry)
is there a Registry Key could cause it?

UpGrade ROM

Hello everybody !
I have a G4 Wizard (Qtek A9100) and I'm trying to update its ROM after read a lot of topics on XDA-Developers (Wizard Windows Mobile 6 for newbies), GFórum and PlusGMS fórum.
IPL: 2.22.0001
SPL: 2.22.0001
GSM: 02.46.11
OS: 2.22.17.1
I already used two diferent chips from two diferent telephone companies which means SIM is unlocked (is that right ?)
After sometime reading I concluded that CIM was locked.
I downloaded HardSPL software and run yesterday.
Now, after HardSPL
IPL: 2.21.0001
SPL: 2.21.Olip
I believe that now CID is unlocked. (Is that right ?)
Then I used RUU from three different ROMs and the same error appears:
ERROR 300: Invalid Update Tool.
"This Update utility cannot be used for your PDA Phone.Please get newer Update Utility"
What does it means ?
What is wrong ?
Tks for your help,
Cássio
Replace the RUU in the Rom with the Mun's RUU provided in the HardSPL thread and run that RUU,it'll work.
ROM UpGrade
Thanks for your help !
Everything works well !
Now it time to learn about WM 6.1 and the new ROM features.
I flashed with Diamond Edition. I know there were a lot of ROMs to be used but this one has info safe for G4...
Does CID unlocked even after the flash I made or if I intent to flash another ROM I need to CID unlock again ? As I used HardSPL I understand it is unlocked.
Tks again for your unique help !!!
Best regards,
Cássio
Thanks! you are most welcome.Yes! it'll will remain semi-permanent Cid unlocked,untill you remove HardSPL,you do not have to apply HardSPL everytime you flash a new rom,just flash as many roms as you wish straight away
Is there any new rom version available for O2 MINI S may be relaeased in 2008.
Zabardast_1,
Now with the new WM 6.1 several questions come up...
1. When I start the Smartphone, a number appears on left upper corner (72410). What does it means ?
2. Wizard doesn't has internat GPS. I have a Deluo GPS antena and I use Destinator software.
Bluetooth is working once Deluo blue light is not flashing (if it is flashing means bluetooth is not connected), but I couldn't until now start using GPS because antena can't find much satellites. There is a set up on Destinator software to configure the GPS but on WM6.1 there is a GPS icon too. Do you know if I need to configure something on WM 6.1 ?
3. Some softwares I had installed on my Storage Card doesn't appears (ShortCut) but they are running when I run using file manager. How can I add these shortcuts on Programs area ?
4. The Wheater tab brings me temperatures in F. Is is possible to configure it to bring in C ?
I noted that battery goes down faster than when I was using WM 5.0 Is it normal ? Is it related to the version of the ROM ?
What differs one ROM from another ROM (considering WM 6.1) ?
I'm sorry for the questions but I'm trying to learn...
Best regards,
Cássio
Sync
Hello,
Some of the problems above I solved, but now I'm facing a serious problem with sync.
I use a Notebook (XP) @ work and another (Vista) @ home.
Everytime I sync with one of them, the other doesn't sync and vice-versa.
What is happening ?
Tks in advance.
Regards,
Cássio
Synch problem
Hello everybody,
I'm still facing synch problems.
Now one more problem come up: Fail to synch due to a register on calendar.
I deleted it on Wizard and on Notebook. Still happening.
Removed and instaled ActiveSync.
Still happening, but this register doesn't exist anymore !
What is happening ? What can I do to fix it and sync with Vista and XP on both Notebooks ?
Thks in advance.
Best regards,
Cássio

T5355 can't update to wm6.5 ???

i got my HTC diamond 2 t5355, and i found lot of problems there that i couldn't find the solution.
here are the info about this phone,
it comes with 256 and 128 windows mobile 6.1, ce os5.2.20954, qualcomm msm7200a cpu, Gps (with i was told it come with SiRF III gps chip set), wifi, blue-tooth.
installed softwares:
fly manila 2d
arcsoft mms composer 4.2.8.1
enablerapi enablerapi
.net 3.5
X HTC
fly ImeVibShortCut
... ( those i guess not so important to list out)
in the system storage root there are files(i don't know the extension):
cemail
.net
mxip_lang
mxip_notify
pim
and then i found the gsp software can't detect the gps. i hv try Nav4All, it said it can't detect the gps or it is turn off.
so, i try to update my cell phone to wm6.5, hope that will solve that problem, but i just can't flast the rom
i am using the offical (i guess) RUU_Topaz_S_Telstra_WWE_2.31.841.6_Radio_Sign_Topaz_61.39tc.25.30_4.48.25.20_Ship
for the update my phone, but it can't detect my phone's image version, it just simply said "image version", and it stops at 0%, my phone's lcd turn off back to the screen saver mode and the activesync was turn off too.
the update fail.
come with an ERROR 260
i really don't know which step i am doing wrong, i have try on the xp, vita system already, same problem.
will anyone kindly tell me why?
This phone not HTC.
It is the Chinese fake.
I have files with WM6.5 for this phone.
GPS has started to work after installation of program A-GPS.
This phone not HTC.
It is the Chinese fake.
I have files with WM6.5 for this phone.
GPS has started to work after installation of program A-GPS.
wm6.5 for t5355
Kindly I need wm6.5 for the same mobile
Where could I find wm6.5 for the t5355 ?
Thank you
nikandr said:
This phone not HTC.
It is the Chinese fake.
I have files with WM6.5 for this phone.
GPS has started to work after installation of program A-GPS.
Click to expand...
Click to collapse
can you give to us the rom? and how we can to flash him? have you same instruction??? thx
Where could I find wm6.5 for the t5355 and how i can to flash ? Please help.
hi
where are you buy this phone? and what wrong with him? i want this model http://cgi.ebay.com/ws/eBayISAPI.dl...sories&_odkw=t5353%2B&_osacat=0&_fvi=1&_rdc=1
some diamond2 can't update spl ,because their wafer is special,must cost £ 3 to update spl . author is xda‘s developer bad luck for you

WM 6.5 < WM 6.1 [radio bug]

Hi guys, i have some problems with my radio. I searched the forum, but i didn't find anything useful.
So.. here is my story. I have recently htc diamond with the 6.1 rom and of course - locked. So I paid for unlocking and after that I tried the Benko's prime rom (WM 6.5). I read the instructions and I flashed it. Everything worked good to me. But after the 4th or the 5th soft reset the phone said to me "dude, there's no service"! I did soft reset , hard reset several times, pre-flash (with other 6.5 roms) , flash other radio versons, even re-unlocked my SIM! But I got nothing!
Then I deciden to flash WM 6.1 ROM to see if it works. And guess what... nothing again! But after some 3G disable/anable (reconnecting to the operator) it worked!!! This trick helped once or twice before I flashed WM6.1, but after a soft reset, the problem appeared again.
Therefore I did soft reset. Not once, nor twice - 7 times... to be sure that everyting is ok. And it still works perfectly!
What do you think? What shoud I do? I want WM 6.5!
btw I flashed WM6.5 again and after the 5th soft reset the problem appeared.
At this time I am stuck on 6.1 and i hope that someone can help me out.
I solved the problem!!! (I hope)
Don't ask me how I did it.
Cheerz!
how did you do it? seriously...

Categories

Resources