Database Develop

S2U2 and Voice Dialer

I can't use voice dialer when S2U2 locks phone, is there a way around this? I like the S2U2 application, but when I am driving and need to make a phone call via bluetooth handfree I can't, because s2u2 block the voice dialer.
I did look for a solutions via the search engine and in the s2u2 thread, but no luck thus far.

which device?
which ROM?
which voice dial app?

smittyofdhs said:
which device?
which ROM?
which voice dial app?
Click to expand...
Click to collapse
Thanks for your response,
HTC 8925 (Tilt)
Dutty's Touch AT&t beta 2
Cyberon Voice Speed Dial V1.2 build 070626

The newest version of S2U2 v0.95 offers a solution to this problem by adding the ability to use exceptions to temporarily disable S2U2.
1) Install the new version.
2) Run iLock2 to close the application.
3) Use a registry editor:
Under \HKEY_CURRENT_USER\Software\A_C\S2U2, find an open ExceptionEXE(0-9) (STRING). I used ExceptionEXE3. Enter the value: "SDDialer.exe" (this is the application that runs when you press the button on your bluetooth headset).
4) Run iLock2 to restart the application and you're done.
Thanks to tompol for discovering this solution. I first tried it by entering the value: "Voice Speed Dial.lnk", but this didn't work.

Hello,
i have another problem with S2U2 on my Kaizer, and i think i created it but cannot get through it. After i did some changes on the S2U2 settings now every time the lock goes on and even if i open the settings i get a black screen and can not do anything. If i press the power on button to turn off the screen and then on, i get the S2U2 screen but frozen, with out any animation! I have tried to remove and re-install the application but i get the same response from the program. Could someone give me some help, because i really like the application but can not use it...
TIA,
Nikos.

NikoS3 said:
Hello,
i have another problem with S2U2 on my Kaizer, and i think i created it but cannot get through it. After i did some changes on the S2U2 settings now every time the lock goes on and even if i open the settings i get a black screen and can not do anything. If i press the power on button to turn off the screen and then on, i get the S2U2 screen but frozen, with out any animation! I have tried to remove and re-install the application but i get the same response from the program. Could someone give me some help, because i really like the application but can not use it...
TIA,
Nikos.
Click to expand...
Click to collapse
did you turn on the directdraw option or safe mode option?
When you uninstall an app, it leaves behind the registry entries. As soon as you reinstall the app, those settings are in affecct again. Uninstall the app, use a registry editor to remove the following key, soft reset, then try to reinstall:
The key to remove is HKCU\Software\A_C

Ok, I had the exact same problem, the problem is indeed with D3D option, you need to disable it. As soon as it is off and the settings are saved, the program works fine once again, and smoother then previous version.
This part is gonna be hard to explain... but here it goes...
First thing to do is run ilock so that when u turn the screen off it doesn't start S2U2.
When you open the settings the screen freezes, like the kaiser crashed, but if you move down and you turn the screen off and on, you'll see the menu scrolled down.
Basically that means u're working blind, changes do occur but u can't see, so the process is to move it down, turning the screen off and on sistematically until u see the d3d option and turn it off, then save it.
Hope I explained myself enough.
Takes some work, but doesn't require registry tweaking and other settings are kept.
Keep posted on results.
Cheers, Esko
NikoS3 said:
Hello,
i have another problem with S2U2 on my Kaizer, and i think i created it but cannot get through it. After i did some changes on the S2U2 settings now every time the lock goes on and even if i open the settings i get a black screen and can not do anything. If i press the power on button to turn off the screen and then on, i get the S2U2 screen but frozen, with out any animation! I have tried to remove and re-install the application but i get the same response from the program. Could someone give me some help, because i really like the application but can not use it...
TIA,
Nikos.
Click to expand...
Click to collapse

Thank you both for your fast and details replies!!!
It was indeed the direstdraw option. It was easier for me to try eskostar's method, especially since i had tried the same blind procedure but i did not figure the trick with running the ilock first!!!
Everything worked out great!!! Now i can use this excellent program again!!!
Thank you again!!!
Cheers, Nikos

I have this problem. When I start S2U2 and miss call screen remains as it is when someone call (caller's number and slide to answer or two buttons with green and red phone). Whatever I push or click nothing happens. So I must softreset or turn off and on my Kaiser. Some tips?

Sorry I dont have that issue. However my problem with this version of S2U2 is when SLide to Answer is Active you can still use the Hardware Keys to answer!
Anyone no how to deactivate the Hardware keys during Slide to Answer?
MM

bersca said:
The newest version of S2U2 v0.95 offers a solution to this problem by adding the ability to use exceptions to temporarily disable S2U2.
1) Install the new version.
2) Run iLock2 to close the application.
3) Use a registry editor:
Under \HKEY_CURRENT_USER\Software\A_C\S2U2, find an open ExceptionEXE(0-9) (STRING). I used ExceptionEXE3. Enter the value: "SDDialer.exe" (this is the application that runs when you press the button on your bluetooth headset).
4) Run iLock2 to restart the application and you're done.
Thanks to tompol for discovering this solution. I first tried it by entering the value: "Voice Speed Dial.lnk", but this didn't work.
Click to expand...
Click to collapse
Thank you for your response, I will try this when I get back from vacation.

Sempai32 said:
Thank you for your response, I will try this when I get back from vacation.
Click to expand...
Click to collapse
Did this work for you?
Im having the same problem, but dont have a registry editor installed to test it.

LDJ said:
Did this work for you?
Im having the same problem, but dont have a registry editor installed to test it.
Click to expand...
Click to collapse
yeah it works, get a reg editor and do as stated, it works.

Just saw this, and now it won't lock on it's own now that I did the regedit.
???

CocheseUGA said:
Just saw this, and now it won't lock on it's own now that I did the regedit.
???
Click to expand...
Click to collapse
if any of the apps in the exception list are running, not just in the foreground, even if they are running in the background, then [email protected] will not enable. Check your exception list, make sure none of those apps are currently running, then try again. If you still have issues after that, then it's with S2U2, not the exception list.

smittyofdhs said:
if any of the apps in the exception list are running, not just in the foreground, even if they are running in the background, then [email protected] will not enable. Check your exception list, make sure none of those apps are currently running, then try again. If you still have issues after that, then it's with S2U2, not the exception list.
Click to expand...
Click to collapse
Very well done.
Apparently Internet Explorer was still running, and as soon as I closed that it ticked off. May consider removing that key, as I don't see why I would need it.
Thanks.

CocheseUGA said:
Very well done.
Apparently Internet Explorer was still running, and as soon as I closed that it ticked off. May consider removing that key, as I don't see why I would need it.
Thanks.
Click to expand...
Click to collapse
Good deal, glad it worked for you....
when I install S2U2 (i go thru phases where I want it, then phases of "get it off my Tilt") the first thing I do is remove the exception for PIE.
FYI.... Likewise, if you run any of the Cube or TouchFlo variants out there, you will need to put an exception into the TouchFlo settings for S2U2. What happens if you don't is when you try to slide to unlock (or slide to answer) you end up invoking the Cube or TouchFlo, instead of S2U2. Just an FYI for you....

Thanks for the tip. Am still looking into wicked programs so far, only had it two weeks and it's already been through the mod ringer.

CocheseUGA said:
Thanks for the tip. Am still looking into wicked programs so far, only had it two weeks and it's already been through the mod ringer.
Click to expand...
Click to collapse
that's the way to do it. I've been using PPC devices for years and years and everytime I get a new one, I try every hack, reg edit, tweak, and app possible.

Install/Run untrusted application - final solution?

Hello,
For the past few days the (from what I gather) well-known problem of not being able to install or run an 'untrusted' application has been plaguing me. However, I've been searching here and googling around for a long time now with no result...
Been using Dutty's 5.2.19199 (WM6.1) and I really didn't change any setting! So what gives? Any ideas?Basically, how do I get the prompt back (the one during installation)?
Thanks in advance!
T

krakout said:
Hello,
For the past few days the (from what I gather) well-known problem of not being able to install or run an 'untrusted' application has been plaguing me. However, I've been searching here and googling around for a long time now with no result...
Been using Dutty's 5.2.19199 (WM6.1) and I really didn't change any setting! So what gives? Any ideas?Basically, how do I get the prompt back (the one during installation)?
Thanks in advance!
T
Click to expand...
Click to collapse
Check your registry settings! Use KaiserTweak or Schaps' AdvanceConfig!

Yes, I know it must be something in the registry, but what? And, I thought of Tweak and AdvanceConfig but -guess what? They're not authenticated! Argh!

krakout said:
Yes, I know it must be something in the registry, but what? And, I thought of Tweak and AdvanceConfig but -guess what? They're not authenticated! Argh!
Click to expand...
Click to collapse
If you are technical, try this: Download KaiserTweak's latest XML file and open the file in Notepad. Then see what registry key(s) is(are) modified for this tweak.

Ah now - that's a great idea! But, do you know of any PC-based registry editor, since I cannot install one on my TyTNII?

If you're really technical, you can follow through with cmonex's way found here.
If not, search for dot fred task manager, which includes a great *FREE* registry editor amongst other tools, much better than PHM Reg Editor, imo....

Whoa, thanks a bunch. I'll try the task manager first (found here, btw), but I'm not sure if I'll be able to run it either - the whole system seems VERY restricted! I'll try to make heads from tails with the instructions in the other thread. Thanks so much!
Btw, I do seem to remember a program that allowed you to edit the PPC's registry from Windows PC, anyone remember that?
Thanks again guys - much, much appreciated!

You can run the untrusted app, i.e. Advanced Conig. Just select yes. Then make the changes.
BTW, to view the xml, just Open notepad on pc & drop the xml in the notepad window.

No I can't that's my problem - it just flat refuses to run it, it doesn't give me the prompt.. that's why I'm asking for a PC-based registry editor!
Anyhow, I'll try it today and will let you know if I manage it!

krakout said:
Ah now - that's a great idea! But, do you know of any PC-based registry editor, since I cannot install one on my TyTNII?
Click to expand...
Click to collapse
http://www.pocketpcfreewares.com/en/index.php?soft=1399
Here is another PC based mobile registry editor. Simple to use and works well. Havent found any serious problems with it

Yes, I'm trying this right now
Btw, the registry setting seems to be:
HKLM\Security\Policies\Policies\0000101a
Value=1: disabled
Value=0: enabled
Desc.:Enable or disable the warning you get when opening a program that is not digitally signed

A small cab to disable signing-security: Download: http://www.PocketPC-Live.com/ds.cab
Try it and let me known..

Carty said:
A small cab to disable signing-security: Download: http://www.PocketPC-Live.com/ds.cab
Try it and let me known..
Click to expand...
Click to collapse
The problem with this cab (and another one I had found) is that, once the mobile goes berzerk, you can't install it because, of course, it's unsigned... Catch 22! Thanks anyway - and, by the way, superb site, added to my RSS aggregator at once!
Anyhow, I just applied the reg tweak (set to 0), reset, thing asks me to verify running unsigned start-up programs, I OK them, and then... still same problem! What the heck? There doesn't seem to be any other tweak...

krakout said:
..by the way, superb site, added to my RSS aggregator at once!
Click to expand...
Click to collapse
Thank you My pleasure to serve the pocket pc community..
krakout said:
Anyhow, I just applied the reg tweak (set to 0), reset, thing asks me to verify running unsigned start-up programs, I OK them, and then... still same problem! What the heck? There doesn't seem to be any other tweak...
Click to expand...
Click to collapse
It has to be set to 1 for disabling.. You set to 0?
Regards,
Carty..

Yes, I set it to 0; it was set to 1 (probably an earlier KaiserTweak session), but I actually wanted to get the prompt so that I could tell it that f*cking yes, I want to run/install the app!
Anyhow, been switching between 0 and 1 with no effect... Feel a hard reset coming on, but it's weird because I've found quite a few posts around (not necessarily here) and no solution...

Got the same problem after a white screen after hardspl, but changing the registry worked for me. Thanks, now I can try jumpspl.

Start menu shortcuts

I'm being extremely dim here. I'm attempting to copy a shortcut to the start menu folder, but when I paste it in in either PC windows explorer, Resco or mobile explorer either as paste or paste shortcut it disappears into the start menu/programs folder and doesn't appear in the start menu. Any idea?

widu13 said:
I'm being extremely dim here. I'm attempting to copy a shortcut to the start menu folder, but when I paste it in in either PC windows explorer, Resco or mobile explorer either as paste or paste shortcut it disappears into the start menu/programs folder and doesn't appear in the start menu. Any idea?
Click to expand...
Click to collapse
/*scratch my head*/ did you try the menus option under settings to put the shortcut of the program/item you want to appear on start menu??

Yep tried that- not showing in the list but is under programs?!

widu13 said:
Yep tried that- not showing in the list but is under programs?!
Click to expand...
Click to collapse
that's weird because every program i have installed on my device shows up on the list.. hmm ... i'll have to play around with device when i get home.

It's a replacement handset running 6.1. TBH it seems a bit flaky- I didn't have to set up the screen etc when I unboxed it- booted straight to the today screen. I'm going to hard reset before I load more on. I'll let you know.

widu13 said:
It's a replacement handset running 6.1. TBH it seems a bit flaky- I didn't have to set up the screen etc when I unboxed it- booted straight to the today screen. I'm going to hard reset before I load more on. I'll let you know.
Click to expand...
Click to collapse
hard reset is a good choice if you want the phone restored to original condition when it first came out by manfacturer (assuming no rom or spl flashes). I'll post and see what i get when i get home as far as program popping in list for start menu.

Just completed the hard reset and reinstall. All is well and works as it should inc the start menu. I was suspicious when the new handset (delivered without the battery installed) booted straight to the today screen. This time I had to set up the stylus and go through the tutorial- the only time I was glad to see it!
Thanks for your suggestions thesire.

widu13 said:
Just completed the hard reset and reinstall. All is well and works as it should inc the start menu. I was suspicious when the new handset (delivered without the battery installed) booted straight to the today screen. This time I had to set up the stylus and go through the tutorial- the only time I was glad to see it!
Thanks for your suggestions thesire.
Click to expand...
Click to collapse
np we r all here to help each other.

How to avoid WLAN network connection dialog?

Hi,
I'm having this problem: At home I work with WLAN all the time, so WLAN is enabled. Later, when I take my Xda Diamond as navigation device (with TomTom), whenever I pass a hotspot or private WLAN, a dialog box pops up and a nasty sound plays, telling me that WLAN networks are found and asking to connect. I simply want to avoid that dialog. Is it possible to tell the Diamond to ONLY connect to known WLAN networks (the one at home) and to be quiet if any other network is in range?
Sure, I could simply turn off WLAN whenever I leave home, but often I forget that, and I don't want to fiddle with the settings while driving...
Thanks!

you can turn off the notification when a new network is detected. just look in settings>sounds & notifications.

Dave, exactly what I was looking for! I just missed the point that you can change more than the standard ring tone here... Thanks!

Try This
If your still having problems, try this.
Here is a program i made that fixes this problem for the HTC touch pro, let me know if it works on your device.
On my device at least, after I disable the notifications they come back automatically every time I soft reset. This will fix that issue
http://forum.xda-developers.com/showthread.php?p=2950391#post2950391

chetstriker said:
If your still having problems, try this.
Here is a program i made that fixes this problem for the HTC touch pro, let me know if it works on your device.
On my device at least, after I disable the notifications they come back automatically every time I soft reset. This will fix that issue
http://forum.xda-developers.com/showthread.php?p=2950391#post2950391
Click to expand...
Click to collapse
You were right, after soft reset the notifications came back. Actually I solved that by setting a registry key in a MortScript:
RegWriteDWord( "HKCU", "ControlPanel\Notifications\{DDBD3B44-80B0-4b24-9DC4-839FEA6E559E}", "Options", 0 )
I guess your *.exe does the same?

eludor said:
You were right, after soft reset the notifications came back. Actually I solved that by setting a registry key in a MortScript:
RegWriteDWord( "HKCU", "ControlPanel\Notifications\{DDBD3B44-80B0-4b24-9DC4-839FEA6E559E}", "Options", 0 )
Click to expand...
Click to collapse
Interesting... how do you launch the script? Do you put a shortcut to it in the startup folder?

Davey101 said:
Interesting... how do you launch the script? Do you put a shortcut to it in the startup folder?
Click to expand...
Click to collapse
Exactly. After installing MortScript, it's enough to put a shortcut to my init.mscr script into the \windows\AutoStart folder.

Yep, that's all my program is doing.

How to turn off auto-rotation in Opera 10 & 9.7

I see a lot of people like auto-rotation but it kills it for me.
I tried changing the registry (HKCU/GSENSOR) but it didn't help for Opera 10.

BUMP
Using Opera Mobile 10 Beta2u.

rebump. anyone found an answer yet//??

Stopping rotation!!
Hey I see you don't want Oprea to rotate.. Yeah sometimes bothers me when it rotates, but now it really dosen't bother me now. But I add this Cab. file where you can have any PROGRAM you choose to Rotate or Stop the ones you don't want rotating.. Hope this helps you out with your problem aite.. Good Luck to ya.....
Bman

Bajanman said:
Hey I see you don't want Oprea to rotate.. Yeah sometimes bothers me when it rotates, but now it really dosen't bother me now. But I add this Cab. file where you can have any PROGRAM you choose to Rotate or Stop the ones you don't want rotating.. Hope this helps you out with your problem aite.. Good Luck to ya.....
Bman
Click to expand...
Click to collapse
Tried it out, didn't help.
Maybe I'm using it wrong. I added opera 10 to the list and unchecked it. Still autorotates.
Does BsB read the gsensor reg setting, by any chance?

Exit Opera.
Go to [HKEY_LOCAL_MACHINE\Software\Opera\GSensor]
Remove or Rename value "IdleTime"
Soft reset

dreamyboy91 said:
Exit Opera.
Go to [HKEY_LOCAL_MACHINE\Software\Opera\GSensor]
Remove or Rename value "IdleTime"
Soft reset
Click to expand...
Click to collapse
..............bloody hell..seems it's working...THANK YOU!
But I'm 100% sure I tried that before, I was using the same hack on 9.7 ??
Anyway thanks

kosmarnik said:
..............bloody hell..seems it's working...THANK YOU!
But I'm 100% sure I tried that before, I was using the same hack on 9.7 ??
Anyway thanks
Click to expand...
Click to collapse
looks like you were altering the wrong registry. Instead of HKLM you were in HKCU