Automatically switch to conference call - Touch Diamond2, Pure Q&A, Help & Troubleshooting

I have problem with my diamond 2. When I make call or receive any, telephone ringing and everything is OK. When I hang up the phone automatically switch to conference call. I need to ask second party for patience, switch back to handset and continue with call. It is unacceptable.
Is there any possibility to setup start call in conference mode which I need to unclick?

May be will help if I add some info:
ROM: 1.39.479.1 (4738) WWE
Date: 04/07/09
Radio:3.43.25.19
Protocol: 61.20t.25.10U
ExtPkg:479.1484.11868.23560
Is there any possibility with reg.edit?

Related

Explanation and Help - Please [2 Parts]

Part1:
I've been having a 8125 for a while now. and I love it. But lately I've been having a problem of phonecalls not getting to me. I know I'm not out of range or anything but I'm just not reciving calls. Even when someone leaves a msg I sometimes get no notification. Even after a reset. But when I actually recieve a call and then they leave a msg I see about 5 voicemails waiting for me when the phone actually only ran once. I with Cingular (before anyone ask).
Rom ver. 2.17.7.2 WWE
Rom Date 2/10/06
Radio ver. 02.25.11
Protocal ver. 4.1.13.12
ExtRom ver. 2.25.11.102
Anyone shed some light for me on this?
Part II:
What exactly does each part of the roms due?
Rom ver. ?
Rom Date [The date of the rom]
Radio ver. ?
Protocal ?
ExtRom ?
Thanks in Advance
No One?
For Part 1 look here:
http://forum.xda-developers.com/viewtopic.php?t=53432
The rest of the info you seek can also be found via a simple search...
Unexplainably missing calls
Respectfully, I do not think the answer to Part 1 is in the indicated thread. That thread mainly deals with dropped calls in combination with GPRS apps.
I have the exact same problem as Zaiaku experiences: missed calls, while the phone doesn't actually have a 'missed call', and the voice-mail notification arriving hours later. At the moment the other person tries to call me, he/she immediately gets voice-mail, even though I'm certain I have good reception at the location I'm at.
I'm not running any GPRS apps (not even mail), and I do not have the dropped calls problem.
Operator: T-Mobile NL
Qtek 9100 G4
ROM: 2.24.10.1 WWE
Radio: 2.25.11
ExtROM: 2.24a Mr.Clean
I hope anyone has a bright idea. This is becoming quite embarrasing...
GPRS may still be the cause of missed calls...
Unless you have completely disabled GPRS it can be the cause of missed calls. I experienced mystry missed calls before I disabled GPRS completely (by calling my provider and telling them to block Data Services except Text Messaging). When I returned to using GPRS I have eliminated the missed calls problem with careful management of GPRS applications and the recent registry tweak found in the referenced thread.
Also, Zaiaku gave no info about what he is or is not running on his phone.
I have the same problem, also time to time my phone answers for me or even worse, dials for me.
The problem is that I use GPRS often and need it to run (can not disable).
laving said:
I have the same problem, also time to time my phone answers for me or even worse, dials for me.
The problem is that I use GPRS often and need it to run (can not disable).
Click to expand...
Click to collapse
For the GPRS Problem look to the thread in my first post here. There is a 'fix' of sorts.
If you have an active GPRS Session then incoming call will always go to voicemail, that can't be changed.
As for the answering or dialing be itself, I've not heard of that before but I wonder if you have the buttons locked when your device is sleeping?
I've have a few times when while removing the phone from its case I hit the red or green buttons enough for a press to register.

Unresponsive Kaiser after bluetooth call

After I use my Kaiser using my bluetooth headset (SonyEricsson HBH-300) everything is fine, call ends normal. But if someone calls me or if I call someone else, then the problem comes.
If someone calls me, the call drops and the phone is unresponsive.
If I call someone, the phone is unsresponsive.
The only solution I do is to do a soft reset.
I saw from the HTC download that they have a fix for BT dropped calls, but they are for WM6.0.
Did they fix the problem in their release of WM6.1 or do I need to install those fix?
HTC original WM6.1
ROM 3.28.405.0
Radio 1.65.16.25

Phone Features

The HTC Touch Diamond is a great Device and can compete with the iPhone.
But why does it have problems woth the phone features.
Answering calls : have to download software : Answer Key / S2U, to turn of the screen so it does not answer in your pocket
End Calls: After ending a call, why does the keypad appear.
And can it be removed, or turn off so that when i end a call it just ends the call and goes back to the home page of turn screen off
All I need to to be able to answer and end calls with no problem.
Had none of these issues with the HTC Touch.
I have been was the HTC Touch for a year and had no phone feature issues.
Can any one help, or should I just sell and get an iPhone.
I want to turn off keypad after the call too
Would upgradeing the ROM help
I have the below
ROM Version: 1.37.405.1WWF
ROM Date: 12-6-08 (6-12-08)
Radio Version:1.00.25.03
Protocol: 25.25a.2509H
Fanosc said:
Would upgradeing the ROM help
I have the below
ROM Version: 1.37.405.1WWF
ROM Date: 12-6-08 (6-12-08)
Radio Version:1.00.25.03
Protocol: 25.25a.2509H
Click to expand...
Click to collapse
Id update the firmware if i were you, your on a old rom and with the newest rom update most problems have been fixed.

Calls fail when dialed HTC WM6.1

Hello, I have an HTC Kaiser with 6.1 HTC Spanish rom. After some weeks of a fresh restart (reloading rom) my calls start failing if i dial them.
Ill explain, if I open my contact list and call a contact I dont have a problem, but if i manually DIAL a phone and call it the call will last 00.00 and it will just say "Call finished"
Thanks for your help! =)
Nano
bump....help please?

[Q] HELP: incoming call PROBLEM on EnergyROM (energy 21916 based builds)

Hi all capable of helping me,
I have a serious problem with incoming calls on this ROM since mid November:
incoming call is ringing
after 1-2 rings (1-2 seconds) it ceases down and a missed call is created
in less than a second later, the original call rings again
if I try to pick it up (HW & SW button tried, no difference), it has no effect. I can pick up the call only in the second phase - after a missed call was created (usually successfull for 50%). The caller probably percieves it as a continuous ringing, but I always get 1 missed call and then a call, which I am able to pick up. some calls are unable to pick up as the caller hangs up prior I try to pick it up.
I tried to hard-reset, to use every newer EnergyROM byt NRGZ28 - no help. I even tried NOT to import settings after first run done by XDA UC. NO USE IN THAT. I did HSPL 2.51 in mid October, flashing EnergyROMs (Energy, 21916 based), Tess Prime F ROM and also latest StockROM - no help.. I am totally desperate and hopeless, as I use the device for company purposes...
any ideas what to do? Please help... THX
Kind regards
tlsty
*** SOLUTION
root cause was on the operator side. I requested the GSM services reset and aftewards it started to work normally.
Please close the thread. THX

Categories

Resources