Any ideas? i get the cingular splash screen... gives me this info
IPL 1.08
SPL 1.08
GSM 01.09.11
OS 1.8.11.1
then it vibrates... then the screen goes dark.. sometimes the screen comes back on.. then goes off again... and that's about all it does...
any ideas? tried soft reset.. (didn't do anything.. durh) attempted hard reset... that also didn't do anything....
any help you can provide would be greatly appreciated...
Moose
were u trying to flash rom before this happend? are you able to get into usb mode? if yes try reflasing ROM, get cingular one.
No... it was flashed back to cingular so the phone could be sold by a friend and I thought it worked ok.. at least according to him... however that appears to not be the case... I am able to get into usb mode... I think... that's the multi color screen where it says usb at the bottom left when it's hooked up to my pc....
i'm fairly sure it's cidunlocked.. however i'm not positive...
i have a cingular 8125
Ipl 2.26
spl 2.26
i was upgrading my rom and it stopped at 36% and now it is stuck in bootloader mode. i have tried to load other roms however it will not. it sounds like its connected but when i run a rom it says its not connected. i have tried many times and i do not know what to do! please someone help me!!
NVM i got it to work!! the problem was a soft reset that i did not do before hand!! i cant believe it was such a simple mistake!
hello folks....
first: sorry for my bad english...
second: i've got a LITTLE problem:
last nite i've tried to flash a new rom on my wizard...
it wasn't the first time.. but... the second!!
something goes wrong...
during the upgrade, windows crashed (blue page), now, if i press the power button, lights come up and its stuck for at least two hours on a white screen..
then, come up the splash screen where are wrote IPL, SPL, ecc...
i write them down:
IPL 2.21.0001
SPL 2.21.Olip
GSM 02.07.10
OS 10.1.0.811 (isn't bad???)
now, the fone stuck forever...
i can't enter in the bootloader so i can't flash it again whit a RUU..
but, the strangest thing... is: the splash screen is from the old rom...
any suggestion??
ah... the rom is this:
XM6r5
http://forum.xda-developers.com/showthread.php?t=355591
how can i fix it? yes... i know... i messed up....
thanx for your answers... even if i can't recover!
If it displays IPL/SPL,then its in Bootloaders,you can flash it in bootloaders.take out the battery for awhile say 30-60 minutes and put it back and try to get into bootloaders and flash the rom.
As its already HardSPL,there shudn't be any problem,just a bad flash due to pc crash.
ok... did it... now, wm starts... but, not everytime.... most of time, it stuck on the famous white screen...
the OS still 10.1.0.811.. i think that is not normal...
how can i "flashback" evreything? i mean... which rom do i use, to have a good base to flash some other rom? my device is a G4.. so, the "love" rom is ok?
EDIT:
i flashed the "wizard_love" rom.. not any problem...till, i've rebooted... white screen again... but when i pressed the power button, it rang like when it seys you "u gonna lose some data" (or something like that)...
SO... Is the screen F******(gone)?
hmmm,perhaps the LCD is a gonner,digitizer or the flexi-cable is creating problems.If you know something about disassembling the device,check if the flexi-cable is properely fixed,otherwise,take it to some repair shop.
simulat problem
hi guys I recently flashed my wizzard with the latest snn edition everything was fine but i tried to install some other program which i did not like so i uninstalled the program system asked me to reboot but now it got stock on the gray windows mobil snn screen i've tried to hard reset with no luck i remove the battery over night still no luck it is bricked? THX
Hi!
this is my first post here, so sorry for my bad english or mistakes
i bought a qtek 9100 on ebay, and i'm wondering if it's a brick or not. i received the device 3 days ago. during this time i read through a LOT of threads here, tried a few things and nothing works.
here is some info:
- the phone is a qtek 9100 without branding
- the IPL is now 1.01 (i flashed "CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE" successfully)
- the SPL is 2.18 (because of the missing suffix ".0001" i guess it's a G3)
- GSM is 01.12.10
- OS is 1.5.4.2
- when i start the device (without any button pressed) it stops at the splash screen (which was a qtek logo before flashing, and is now this picture with a beer, that says "some things last forever" )
- i can get into bootloader screen (color screen) by holding camera button while starting
- in bootloader screen a small "USB" appears when i connect cable to usb on pc
- when i press communicate and voice buttons (on the sides) while starting, the "Press send to restore factory default" screen appears, but pressing send prints out "Format FAT Partition Format is Failed"
- the device gets recognized by windows ("Mobile Device" appears on my computer)
- ActiveSync 4.5 does not connect to device, not even as guest.
- when i hit "Connect..." in ActiveSync's connection settings, nothing is found
("Allow USB Connections" is ON)
- the device is CID-locked ("FF" state in Mtty 1.42)
- i can't unlock CID, because i can't get "EnableRapi.cab" onto the device without ActiveSync connection
Ok, these are basically the things i know now. The problem is that i never saw any other screen then the "HTC" boot screen, the "Qtek" splash logo (the one with the clouds) before i flashed with custom ruu wwe, after that i see the new splash logo, and i can get into bootloader (color) screen. I never saw any windows mobile running on this device! I could never establish a connection with ActiveSync!
So i hope that someone here on this nice forum can help me get this device to work (WM5 would even be enough right now) or at least give me a hint!
Thanks in advance!
Put the phone in bootloader mode and flash back to the original ROM.
since i bought it in ebay i don't have the original rom of this device.
but i found "233309-qtek9100_2180707_21807109_20710_qtek_ger_ship.exe" through google, which seems to be an original qtek rom (version 2.18). shall i flash this one?
You can find in the Wiki the latest official roms of every brand for our Wizards .-
ok, thanks.
i found one (Qtek GER 2.18.7) and flashed it. the process was successfull, now the IPL/SPL is both 2.18 . But the device still doesn't start and stops at the splash screen (which is now the original qtek splash again). I can still get into bootloader mode and hard reset results in "Format is failed"! No ActiveSync connection either... how should i proceed now?
i basically narrowed it down to these two problems:
- the splash screen freezes
- hard reset error "Format is failed"
( IPL: 2.18, SPL: 2.18 )
can't anybody help please?
i'm freaking out about this
With everything i’ve read the only people who’ve had any success had CID unlocked devices.
ok, i think that too for what i've read so far...
is there any other way of CID unlocking except lokiwiz (can't copy enablerapi.cab without activesync!)?
would this imei-check service that i've read about work in this case?
meanwhile i've also tried something with mtty (r2sd all) but doesn't work -> "didn't get proper security level"
is this also because of the CID lock? i tried to find out the right password to enter in mtty, but found nothing that worked...
does anybody know the correct password?
I couldent CID unluck my 9100 with lokiwiz so i did it 5min ago with Wizard Service Tool (ha to reboot my computer).
I'm having the exact same problem,
except I can't flash any other ROMS so I'm stuck looking at this incredibly frustrating beer picture, with "some things last forever".
Does anyone have any further ideas?
Look up the orignal rom on the wiki, get into bootloader. And flash it back.
Jodda said:
I'm having the exact same problem,
except I can't flash any other ROMS so I'm stuck looking at this incredibly frustrating beer picture, with "some things last forever".
Does anyone have any further ideas?
Click to expand...
Click to collapse
Jodda said:
I'm having the exact same problem,
except I can't flash any other ROMS so I'm stuck looking at this incredibly frustrating beer picture, with "some things last forever".
Does anyone have any further ideas?
Click to expand...
Click to collapse
Hi Friend!
I have the same problem with my Qtek9100!
Any ideas? have you solved your problem?
I have the frustrating beer picture
Please help me.
Very Thanks
Like I sad before
Get into bootloader, flash back the original rom and try again.
mizobuchi said:
Hi Friend!
I have the same problem with my Qtek9100!
Any ideas? have you solved your problem?
I have the frustrating beer picture
Please help me.
Very Thanks
Click to expand...
Click to collapse
I put the original rom.
But... the problem is the same.
when I started the device (without any button pressed) it stops at the splash screen (which has a qtek logo before flashing)
- i can get into bootloader screen (color screen) by holding camera button while starting, I installed the original and others rom who days before works perfectly... Now... this stopped at splash screen
- when I tryed to format.. = "Format FAT Partition Format is Failed"
Any idea?
I have tried this : http://forum.gsmhosting.com/vbb/showthread.php?t=332143
but... without success.
Could you help me, please?
Very Thanks
i'm still stuck with the same problem with hang up on qtek splash screen, too!
i have IPL 2.18 and SPL 2.18 and i can get in boot loader screen and connect with usb. (but no activesync connection!)
formatting doesn't work either.
does anybody have an idea how to solve this?? it's frustrating... i've tried almost every guide here on the forums.
same proplem here with
ipl 2.16
and spl 2.16
I used this to fix this problem
Hi i had the same problem the other week, installed a dodgy app, went to do a hard reset and wouldn't do a hard reset format failed. Tried updating rom everything worked ok until you booted it up. Wouldn't go past second splash sreen. After a few hours of trawling round i found this thread.
http://forum.xda-developers.com/showthread.php?t=276963&highlight=format+is+failed
worked for me. Hope this helps you out.
Problem in connecting to my PC
Hey ,
I just bought a qtek 9100 a day before ... I tried to connect it with my computer.. instead of connecting my battery gets charging well can u plz help me out !
is there any software that i should install in my pc in order to get it connected to my PC...... please help me fast ! Lot of work is pending !
Thanks
Salman
Ok guys, I finally have this SOLVED.
My QTEK 9100 is working fine now!!!
I'm so happy with it right now
Since nothing I tried worked, I went to imei-check.co.uk and got my phone completly unlocked! It only cost me about 11€ and since it works now I have to admit that it was worth it (no advertising). After the unlocking was done I could do the "r2sd all"-method (Tool: MTTY 1.42) using a miniSD card. You can find a good tutorial on this board somewhere. After that everything was just fine...
-> I never saw it working and Hell Yeah: This baby just kicks a$$ !!! (although it's kinda 'oldschool' these days )
Ok hello again,
Its been 5 days without WoW trying to figure out what went wrong. Even if i cant get this thing working i'd like to know/learn 'why' it is bricked. But anyway. I recieved a kaiser [tilt] this past monday, my GF called me at work to let me know it came in the mail. After I got home I was ready to start flashing. Long story short, I was trying to upgrade to a HardSPL like i had done a couple times on my TP2. Something went terrible wrong somewhere between jumpSPL and somewhere else. The phone is now stuck in the bootloader. It did have RUUNBH in the top right corner but i got that to go away by flashing a shipped At&t rom back on the phone. But now it still wont leave the bootloader after completeing a couple different shipped rom updates. now the bootloader reads
KAIS1*0
SPL-3.56.0000
CPLD-8
I have usb support in bootloader but cant seem to get it to allow me to flash a new radio. So, i guess what my next question is what is the order I should try to try and recover this thing. Radio, SPL, Rom or some other combination. and thats it.
Thanks in advance,
Lord CraiguS
update
So i found, \RUU_Kaiser_CINGULAR_WWE_1.62.502.0_radio_sign_22.45.88.07_1.27.14.09R2_Ship.exe and it downgraded the spl to spl-1.93.0000 will see what i come up with after this.
ok after trying more shipped roms I DID get a hard reset to work, first time outta 100 tries. Altho it told me it reset the phone back to factory settings, I got the splash screen only to load up telling me the SIM cradle was unlocked and to lock it before continuing. Needless to say I didnt get it shut in time and it reset back to bootloader. In the wiki's ive seen that alot of bootloader looping errors occur with this device but none of the fixes seem to work for me. please help if you have any insight.
Lord CraiguS