I have discovered how to assign keymaps to the Cube FPS game (requires installed OpenGL ES drivers and the Pocket PC port of the open source first person shooter game Cube). I have attached a copy of my keymap configuration. By placing it in the DATA folder inside the cubeppc folder (replacing the old keymap), the center key (enter also works on Touch Pros) will fire (instead of jump) and the down key will bring up the menu (allowing you to actually play).
If you want to make other changes, the keys, CENTER, UP, DOWN, LEFT, RIGHT will actually work on the Touch Pro/Diamond. ESCAPE may work (End key) but there would be no way to exit the game but to soft reset your device(I have not tried this but it is reversible (just remap)). I would also recommend remapping LEFT or RIGHT to "weapon" or "weapon 2 3 4" although both will only switch between two weapons (last weapons used/picked up) and do essentially the same action. This remapping may be undesirable because of losing the ability to move sideways. I would recommend leaving one for movement to dodge enemy fire.
I have not tried remapping using any other config files and did not have success remapping to letters (Touch Pro hardware keyboard). Most other keys are for several Dell Axim Pocket PC models that this port was originally intended for. My attempts to change keys (example. from "MIDLEFT" to "SPACE" or a letter (Touch Pro hardware keyboard)) have had no effect on the game.
attack=fire
weapon or weapon 2 3 4=change between last weapons used/picked up
showmenu main=show menu
quit=quit game and return to previous app/program/launcher/Today Screen
Also attached is a shortcut (I would suggest putting it in your Games menu under your Programs menu). The short cut requires you put the whole "cubeppc" folder in My Documents on your device's storage (not Storage Card). THE SHORTCUT IS NOT REQUIRED!
very nice, will try it soon
I will try this out too, saurbraten (cube2 engine) is one of the best if not the best free FPS's out there.
Related
Anyone got this working on the Diamond. Working fine on my old SE W850 - dont know where to start with the Diamond
I'd like this too.
Can only think about doing it via web browser
I use the k800 version and remaP my left and right hardkeys to act as softkeys but the text is tiny!
How do you download the K800 version of Sky Remote?
Sky doesn't let you chose a particular phone during online setup.
Sky By Mobile Java App
Here's the Java app download.
http://mobile.sky.com/SBM/SonyE_novid/SkyMobile_SonyWithoutTv.jar
All I got to do now is try to remap hardkeys!
Got AE Button Plus, but a bit scared of all it can do.
Can Ericsson68 tell us how he remapped hard keys?
Is running TF3D, cos that seems to overwrite hard key functions when run?
Just got round to trying this.
How do i run the file as .jar files are not assosiated with any apprication?
Put .jar file on Diamond first using activesync.
Then run Jblend first and install and run java apps or .jar files from there.
I still can't get it to logon yet.
fillippe said:
Put .jar file on Diamond first using activesync.
Then run Jblend first and install and run java apps or .jar files from there.
I still can't get it to logon yet.
Click to expand...
Click to collapse
Have you looked at
http://www.digitalspy.co.uk/forums/forumdisplay.php?f=35
I know that people have had problems. You might find the answer there.
Hi
I used AE button and then remapped the left and right ring keys to long presses = left and right soft keys. I never do long presses on the left and right ring keys so this made sense to me.
Prepare to need a magnifying glass when you do get logged in though. And from experience put your password in before the user name. For some reason doing it the other way around often crashes it.
Ok! Got application working - am able to enter password and user name.
Have tried remaping keys, but dont understand how or why. Could you go through it step by step.
Have a copy of AE Button Plus installed.
Thanks
Another jar file
This one allows the soft keys to work but doesn't actually manage to login for me.
I attach the file for you to try.
Solution!
trice1921 and colthekid worked this solution out at http://forum.xda-developers.com/showthread.php?t=507152 for the Touch HD / Blackstone. It works for the Diamond as well. I'll copy the solution here and hope the mods don't mind.
The java file is here http://mobile.sky.com/SBM/SonyE_novid/SkyMobile_SonyWithoutTv.jar
The HasKeyboard reg key is important and you will need to disable the volume control in S2U2 if you use it. Enjoy!
Firstly, follow the instructions in the original article posted by gears ie. register on the web for sky mobile and download and install the java software and SkyMobile_SonyWithoutTv.jar file.
Also register for "Remote Record" via your Sky+ box (instructions on the Sky.com website)
Next, as the HD does not have a hardware keyboard, we need to "spoof" the OS into thinking the HD does have one. This is done in one key in the
registry (which I found completely by accident while looking for a different one!).
Goto... "HKCU/Software/Microsoft/Shell" and change the value of "HasKeyboard" to 1
Soft Reset the phone.
We will then need to map some of the buttons to give us up/down/left/right, Enter and Left/Right Soft keys. As NickMilner suggests above, i use "AE Button Plus" and my mapping instructions assume that's what you will use. (the program does cost but i don't know of any other one that provides double, triple and long press options for each key and appears to work well enough in free/trial mode anyway!)
Map the following in AE Button Plus
Volume Up button: Single press - Volume Up
Double press - Press Up Arrow
Triple press - Press Left Arrow
Long press - Press Left Soft Key
Volume Down Button: Single press - Volume Down
Double press - Press Down Arrow
Triple press - Press Right Arrow
Long press - Press Right Soft Key
Green Phone Button: Single Press - Press Green Button
Double Press - Press Enter
I would have liked to use the Red Phone button, but whatever selection i made, the red button always acted as an "Exit" button in the java app, so I went with the above. It's a bit complicated I know with all those double and triple presses, but IT WORKS and i've soon got used to it. I'm sure you could chose your own combination of presses, but the above ones work.
Well, there you go, see if it works for you (I Bl**dy hope so...this has taken me ages to write!!)
Click to expand...
Click to collapse
I came across Winterface last night.
I must say being an ipod touch owner I do like Winterface. The ability to have buttons for applications, contacts and settings all mixed up is great!
Also the slide function is very smooth. I have only found that sometimes its hard to press the buttons just right to activate them but that may just be fat fingers on my account.
I like Touch Flow but do find it a bit slow (even with the registry adjustments). I cannot update my rom as I cannot get a Hard SPL to load so Winterface is a nice alternative.
Three big problems for me:
1. No way to see upcoming appointments/tasks
2. Buttons are hard to press because the screen starts sliding
3. It's hard to get from the applications to the Winterface without closing them, if your OK button is set to Close. You have to get to the today screen and then make the finger move.
For me, it's unusable.
gave it a 30 minutes try on my Diamond.
Buggy buttons indeed - pressure issue with Diamond.
Would like to see Accelerometer support - shake and bake - switch screen or so.
I give it a fair 8/ for concept - a 3/ 10 for price (39USD is very expensive)
I will wait for Schaps UI
Just finished porting this one from Graphics for Masses. Quite a few errors in the source, couple of the tech demos don't work very well due to pointlessness or isn't allowed in OpenGL-ES. Also, assuming VGA, incompatible with WinCE/WinMob/VS2008, etc.
instructions & caveats:
d-pad select to select from menu
up-down-left-right on d-pad to do something
touch screen to go back to menu
select Exit from menu to quit program
probably won't work in landscape
supports minimizing
Hey guys, i just spent like an hour trying to figure this damn thing out but i cant seem to do it!
here's the game, gfDoom,
http://home.freeuk.com/gamefreaks/pql/gfDoom.htm
just FYI.
I'm attaching the "keyboard" skin for the game, which allows landscape and i'm quite happy with it. The only problem is in landscape i cant see a way to save the game, or exit the game.
By default for Touch Pro, landscape
VOLUME DOWN = OPEN DOOR (which is fine)
BACK BUTTON/OK BUTTON = SHOOT (also fine)
Other hardkey buttons unmapped.
doesnt need a map button since on screen, bottom left corner activates the map
now i'm trying to map the pause/menu button to one of the hardkeys. Make full use of em. Like the enter key and the volume up key. Can someone help me out here? I think one key shud be a letter or something so that can save the game. Like when i wanna save the game i have to type a name.
I have found this link "Keys and Key Codes for Windows Mobile" but am unable to get it to work after several attempts.
http://msdn.microsoft.com/en-us/library/bb431750.aspx
see attachment for the instructions and the folder containing the skin "Keyboard"
Hopefully someone can help me out by helping me map it out.
Please post results here
bump for attention. i'm sure someone knows these stuff and i'm hoping to learn T.T
bump one more time. maybe i shud ask in raphael main forum section?
Change the title of your thread. It sounds like you're trying to get someone to give you registration keys for software, or something equally illegal. I realize you're not, but I may simply be more curious than the average reader.
Look for a program called HButton. It might do what you're looking for.
Also, it's considered bad form to bump your own threads, unless they fall off the first page without getting responses.
Myrddin Wyllt said:
Change the title of your thread. It sounds like you're trying to get someone to give you registration keys for software, or something equally illegal. I realize you're not, but I may simply be more curious than the average reader.
Look for a program called HButton. It might do what you're looking for.
Also, it's considered bad form to bump your own threads, unless they fall off the first page without getting responses.
Click to expand...
Click to collapse
yea it fell off the first page which is why i bumped it.
oh okay will edit thread title.
and btw HButton is to assign apps to hardware buttons. what i need is some help regarding configuring the .txt file for gfDoom to configure Doom controls. what i need is a hardware button for the menu key
Managed to get it working reasonably.
Volume down = FIRE
Volume up = STRAFE (hold down whilst pressing left or right)
OK/Select = OPEN
Back = FULLSCREEN (Toggles between portrait and landscape)
Couldn't seem to map the Call and Call-end buttons successfully.
Having the "Back" button as a full screen button seemed more functional than just using it to pause or quit the game, as from the portrait/keyboard mode you can access these facilities and more (e.g. save, load, exit etc).
Just stick the modded text file in your "KEYBOARD" folder. I've renamed my "KEYBOARD" folder "DEFAULT" so I don't have to use the launcher .exe (configuration tool) and can just use the direct .exe to go straight into the game.
P.s. The game seems to run ever so slightly more smoothly if you disable TF3D (Manila) from: Settings/Today
before launching the game. Simply enable again once you're finished.
In case you want to setup you controls differently, here are the mapping codes for the buttons:
Code:
Button Hex Dec
vol+ 0x75 117
vol- 0x76 118
back 0x5c 92
end 0x73 115
call 0x72 114
ok 0x86 134
up 0x26 38
down 0x28 40
left 0x25 37
right 0x27 39
You need to enter the decimal values within the text file.
i'm actually using the up button to pause game to save etc etc. but i'll definitely try to follow your config for the volume up button. cuz i cant get mine to work. i prefer back as shoot. lets me run around with stylus and shoot/strafe.
I've modded the skin a little further, using the default skins layout and the keyboard skins toolbar (with fullscreen and exit etc)
Attached the skin files...
Made two new skins for GFDOOM from scratch with as much functionality for the Raphael as I could map. I'm quite pelased with them.
One is a Doom themed skin, the other one is to match NRG's EnergyROM theme.
Hi, newbie here trying to find out if it’s possible to turn an android phone into a fast desktop type multitasker. Was told I need a combination of AOSP ROM + eXposed, +Tasker +plugins, and a launcher like Lightning Launcher Extreme. so trying to assemble a list of things I’ll need, and find out if it’s even possible or not to achieve these tasks. In priority sequence:
1) Add as many as 15 buttons to nav bar. would love to change the size and more impornt spacing maybe even location of each button.
2) Optional (ability to lock some of the buttons across the board so lets say, on left side I have a locked home and back button, btu the ones on the right I can swipe left or right and move the nav bar buttons just like on Xtended NavBar app , so it’s kind of like a split nav bar.
Is it possible to add specific functions to each nav bar button I create:
3) Three zoom buttons, one with preset zoom %, so I click it once it zooms in to my preset % I click it second time zoom out must be able to preset the % of zoom somewhere. The other two zoom buttons are regular zoom in and out by increments (if possible preset increments as well per each click)
4) Multitask, instead of resent app, where it shows my open apps as smaller windows, I’d rather switch between them in full screen view, so the navbar recent app button must be mapped to simply switch between all open apps in rotation with each click.
5) Copy/ paste/ cut / undo / 4 buttons, not sure if it needs mapping in each app I use or universal, if each app, can it be done in Firefox or any other web browser, and in Microsoft office or any other office program so when I highlight text I can use these buttons, just like they normally would work in desktop versions?
6) 4 arrow keys, this is for Microsoft excel to shift quickly between cells so in each direction. Or as scrolling in web browser in all 4 directions.
7) search button, same concept as copy paste only once I highlight a text this button will search the net for highlighted text not sure if it’s possible to do from office app as well.
8) Now this is a tricky one, is it possible to automate the nav bar buttons, so if I had 10 or more buttons in total, they can’t fit the screen obviously, os once I open a certain app, the nav bar would move left or right depending on my app, so lets say I open an office app, the cut/paste /undo are automatically in front of me, if I open a excel then the arrow keys are in front……and so on
9) Is it also possible to remap volume keys in certain apps, so lets say I open excel, I have space in my nav bar only for 4 arrow keys, so in this case the volume buttons would become copy/paste.
If some could list the ROM, which launcher, specific modules, specific takser plug ins that could accomplish this or some things, well in an optimized way so I’m not running 15 apps for each request, then I will research each one individually.
Sorry for the long post.
Cheers
I have honestly never heard of such things...
And I think (having owned a Note 3 and now a Nexus 5) that the closest you can ever get to such multitasking experience is to own a Galaxy Note 4, with all the S-Pen functionality that's been added so that it'll work like a mouse on a computer. I know this may not add a lot to your cause; it's just what my knowledge offers.
Well for a newbie the confusion comes to me from not understanding the fundamentals of the android, what things are in the core and what things are on top as a layer? So for example if there is a back button on most phones that’s a fundamental core feature, does that mean it will be easy to add a forward button, so this way I’m compromising on my number 4) request and trying to go more a long the lines of android fundamentals.
As for the note 4 if it does add some mouse like functionality it’s only 50% since some things are faster via keyboard shortcuts rather then a mouse.
The problem I see is too many menus, so you select a text even with an s pen you must open a menu then select a copy, then open another app where you want to paste it in a specific location first you must zoom in that means turn the pen away and zoom then turn the pen towards another menu to open so you can select paste… The pen only has one or two buttons so if it has the zoom buttons I can’t paste quickly with a pen, if it has the paste buttons then I need to use my fingers to zoom in again turning my hand back and forth
way too many menus and not very productive way of working in trying to accomplish a small task of coping a text in one app and pasting in another in specific location. As you can see I’m trying to combine both mouse and keyboard shortcuts into one nav bar button this is to overcome the shortcomings of a small size screen and lack of keyboard and mouse of course.
I realize maybe the whole goal of android was never geared towards my way of thinking, but if it’s open source platform and as I see it there are many things that can be changed compared to a more closed system, it’s how difficult to do it only a programmer will understand, a I’m not a programmer. So I’m here trying to get some answers.
Cheers