Hi every one i did the stock spl and on the tri color thing it now says
KOVS110
SPL-0.78.0000
MicroP1-787
MicroP2-707
but still goes back to 6.5 and i really dont know how to get 6.1 back can anyone help.
hi every one i managaed to do it but when i get to the tri colour screen it starts saying loading and thats all it does and it hasnt changed its stuck like that
If you just want to flash another ROM you don't need to restore stock SPL. 0.78.0000 is stock SPL.
If you need to revert back to stock SPL please read the sticky from OliNex on how to.
If you have a cooked ROM flashed and you want to go back to stock:
1 - download the ROM of your choice and flash (no need to go back to stock SPL)
2 - DON'T GO BACK TO STOCK SPL WITHOUT FLASHING A STOCK ROM FIRST, as revered to by OliNex.
3 - just flash a 6.1 ROM as you did 6.5
gl
thanks got it working now thank god lol
Related
I recently upgraded to the official HTC 1.56 ROM.
Flashed it as I normally do via the microSD card. Everything seemed to be fine but once I got the boot screen the colors went from white to teal colored. Even the boot up image is teal colored.
Once the ROM boots up the color issue is still there.
If I turn off the backlight and then turn it back on the colors go back to normal with no issues. If I soft reset it will go back to the weird color issue again. I have tried flashing 3 other ROMs....the official shipped ROM that came with my device and other ROMs as well.
Anybody else ever heard of something like this or have a problem such as this before.
Any advice help would be greatly appreciated.
Thanks in advance.
I assume this is a hardware related issue or maybe SPL?
Here we go. I Just have had the same issue. I was in HSPL before. I changed to USPL and flashed 1.56 based ROM by Laurentius, in beta testing. Everything was fine. I decided to try Davidhuck 6.5 v7 ROM, and after flashing in USPL mode I had the same problem. Now I'm trying tp flash another ROM.
I have had the same since upgrading to new official HTC rom.
you need to remove hspl by restoring your original stock spl before flashing rom 1.56 so your spl can upgrade to 1.54. see the rom 1.56 thread http://forum.xda-developers.com/showthread.php?t=501583
pw120 said:
you need to remove hspl by restoring your original stock spl before flashing rom 1.56 so your spl can upgrade to 1.54. see the rom 1.56 thread http://forum.xda-developers.com/showthread.php?t=501583
Click to expand...
Click to collapse
Wow thank you for this. Does anybody happen to have the SPL 1.54 as a standalone. I will be unable to flash the ROM without hardSPL.
Invalid vendor ID 294.
I used uspl 2.5 after I restored stock spl, has worked ok for me several times but its a risky flash according to the uspl thread, use at your own risk
It's not a metter of reverting back to 1.14 or 1.54 stock...
I did this operation the very first time to get Original Stock SPL 1.14:
Instruction one more time to flash to my latest rom.
1) Flash stock rom to get stock spl:
http://rapidshare.com/files/17797607...25.14_Ship.exe
2) Flash USPL and then flash to latest HTC 1.56:
Uspl:
http://forum.xda-developers.com/showthread.php?t=462347
Latest HTC shipped:
http://forum.xda-developers.com/showthread.php?t=501583
3) Flash another time USPL and then flash custom ROM
Click to expand...
Click to collapse
The moment I tried to flash a different rom, a wm 6.5 based, I had the problem.
try going back to spl 1.14 / hspl for the wm6.5 roms. need to match the roms to the corresponding spl's now
@pw120
The miri WM6.5 v.7.2 is based on 1.56 rom...it should match new SPL...but I still have the same issue...
Now I flashed the stock 1.56 and the weird color issue has gone. Uhm...it should be related to WM 6.5 ROM. Now I will flash once again a 6.1 coocked rom based on 1.56 and see what happens...
Problem fixed.
thanks guys.
1.) Revert to original SPL
2.) Flash USPL 2.5
3.) Flash 1.56 ROM
4.) Complete.
if anybody else has problems with this just hit me up on MSN at [email protected] or via PM.
@AllTheWay
The problem is not fixed for me. I did that procedure 3 days ago and then I installed last Laurentius Beta ROM which is 1.56 one. The problem occured when I decided to flash some WM 6.5 ROM and also last 6.1 Davidhuck. Now I'm flashing back Laurentius beta to see what happen...
some cooked roms based on 1.56 have changed one of the .dll files so they work with old spl and hspl
@ PW 120
U r veru right! This is the problem! So to all coockers please
SPECIFY IF YOUR ROM ARE FULL 1.56 BASED OR NOT...
asci said:
It's not a metter of reverting back to 1.14 or 1.54 stock...
I did this operation the very first time to get Original Stock SPL 1.14:
The moment I tried to flash a different rom, a wm 6.5 based, I had the problem.
Click to expand...
Click to collapse
Flashing stock ROM won't give you stock SPL if you had already flashed new ROM with 1.54 SPL. You have to flash stock SPL separately to get back to it. Had colour screen problem with stock ROM and realised I still had 1.54 SPL from upgrading newer ROM. Flashing 1.14 SPL the risky way with USPL solved the problem for me.
Same problem after NEW WWE 1.56.401.1 ROM
I just Reflash with OLD Europe 1.14.401.2 ROM from WIKI
All is OK now,
no colour screen problem and the 1.14 SPL is back to my HD
AllTheWay said:
I recently upgraded to the official HTC 1.56 ROM.
Flashed it as I normally do via the microSD card. Everything seemed to be fine but once I got the boot screen the colors went from white to teal colored. Even the boot up image is teal colored.
Once the ROM boots up the color issue is still there.
If I turn off the backlight and then turn it back on the colors go back to normal with no issues. If I soft reset it will go back to the weird color issue again. I have tried flashing 3 other ROMs....the official shipped ROM that came with my device and other ROMs as well.
Anybody else ever heard of something like this or have a problem such as this before.
Any advice help would be greatly appreciated.
Thanks in advance.
I assume this is a hardware related issue or maybe SPL?
Click to expand...
Click to collapse
You can find the solution here and why => Wiki Rom 1.56 and color issues...
custardo01 said:
Flashing stock ROM won't give you stock SPL if you had already flashed new ROM with 1.54 SPL. You have to flash stock SPL separately to get back to it. Had colour screen problem with stock ROM and realised I still had 1.54 SPL from upgrading newer ROM. Flashing 1.14 SPL the risky way with USPL solved the problem for me.
Click to expand...
Click to collapse
Well, I falshed stock ROM when I was HSPL in order to get original 1.14. Now I'm with 1.54. I suppose that if I would go back to 1.14 and than HSPL, I should follow a different procedure that, as are you telling me, couldn't be the simply flashing 1.14 original stock.
The problem of wired color under 1.56, is that the most of the ROM avaible are designed for lower SPL, and also the one which are based on 1.56, were modified by replacing a dll file which allow all people with 1.14 HSPL device to flash every rom. ATM I'm running a beta ROM by Laurentius which is "full" 1.56 and I have no problem. So, once you upgrade to 1.56 and flash with USPL (since HSPL for 1.54 is still not avaible), if yuu want to flash all the rest of the rom you have to downgrade to 1.14 spl:
* Download an older stock ROM for your CID (region/operator)
* Flash ROM (to downgrade SPL)
* Install HardSPL
The problem is that for a period we will have this double way in ROM coocking, one with full 1.56 base and another one with a 1.56 modified dll. All coockers should point out when a new rom will be released, if it is for HSPL 1.14 or USPL 1.56.
...at least I think this is the problem...
AllTheWay said:
Problem fixed.
1.) Revert to original SPL
2.) Flash USPL 2.5
3.) Flash 1.56 ROM
4.) Complete.
Click to expand...
Click to collapse
Hmm...
Here's what I did:
Had HardSPL, flashed to original rom with original SPL.
Then upgraded to original 1.56 without problems.
When I now use USPL to flash cooked ROMs based on 1.56 (like Miri's 7.2), I get the green screen until I turn the screen off and back on again.
Is this fixed by flashing the original 1.56 from USPL? Sounds a bit weird to me.
-KJ
fjevel said:
Hmm...
Here's what I did:
Had HardSPL, flashed to original rom with original SPL.
Then upgraded to original 1.56 without problems.
When I now use USPL to flash cooked ROMs based on 1.56 (like Miri's 7.2), I get the green screen until I turn the screen off and back on again.
Is this fixed by flashing the original 1.56 from USPL? Sounds a bit weird to me.
-KJ
Click to expand...
Click to collapse
You sure that 7.2 is based on 1.56 ?
"* [ROM][WWE][11.04.2009] Miri WM 6.5 21500 :: V 7.2 [ONLINE]
This ROM is based on Windows Mobile 6.5 build 21500." first post of his thread
The way I see it is once you have 1.56 you can't flash cooked roms with out getting the color issue.
I think the exeptions are roms based on 1.56 as they have the correct version and combination of disptools.dll.
Now you dont want a stock rom so why would you still need SPL 1.54 on your decvice were you can run the risk of the color issue.
Would not a down grade of the SPL to 1.14 be enough for you to flash any rom as you did in the past (HSPL, USPL).
Now what I am not sure about is if you downgrade SPL 1.54 to 1.14 and still have a 1.56 rom installed will you get color issues ???
As allways info taken out of this wiki page
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Rom156
@fjevel
Miri's 7.2 is not a full 1.56 based rom. He should have modifed a dll in order to make it run under 1.14 HSPL device. To have it to work correctly you should flash a full 1.56 ROM, like stock one or Leo Beta I'm currently testing.
my topaz needs a service and i restored the original and rom. when i used the relocker that is provided by olinex, my device is not booting. i need help please. my device shows that its running stock spl 1.33.0000. when i come to flash another rom (sock rom) it will not allow me to do so.it says not allowed please help me.im begging
Hey. If I am not wrong, you need to load the stock rom before lock it with SPL again.
So what I would do is try to HSPL again, load the stock rom and then lock it with the SPL.
Hope it works. There are a few threads that shows you how to load the stock rom back in order to send it to HTC warranty service.
Cheers.
it wont let me load hspl. it will say not allowed for some reason
please tell us exactly your steps ...
never mind. i was getting errors because i was trying to install a rom that was not meant for my phone after i put the stock spl and i didnt know that europe had more than one wwe version
I can't seem to find which SPL comes with the tilt 2. I semi-bricked my phone and I need to flash the stock one back before going to ATT. Right now I flashed back the .87 SPL. Can anyone help?
It doesn't really matter. All Stock SPLs are the same as far as manufacturers are concerned, so long as it doesn't say OliNex I don't think anyone will check.
You could always flash the Shipped Exe from your supplier over the current .87 stock SPL.
Any more problems, please ask in the Hard SPL or ROM flashing thread.
Ta
Dave
Hi, I'm due to return my Touch HD back to Orange for a swap for a replacement handset, but I would like to make sure I return it back with the original Stock ROM and SPL.
If I switch on my phone with the vol key pressed, it shows that I have:
SPL-1.56.OliNex
And I am currently using the latest MaryOne ROM.
I have downloaded: RUU_BlackStone_Orange_UK_1.14.405.3_Radio_52.49a.25.26_1.09.25.14_Ship which I believe was the original Stock ROM for my phone. It appears that this ROM is the older 1.14 version.
Before flashing my device with this ROM, do I need to downgrade my SPL first? Or is there a way to make the phone use the Stock SPL? (The reason I ask this is because I remember reading the "dummies guide" and it said that in order to use the newer 1.56+ ROM's I had to upgrade the SPL, so my guess is I may need to downgrade now to install a 1.14 ROM?)
Could anyone clarify for me?
Thanks,
WizzKidd
wizzkidd said:
Hi, I'm due to return my Touch HD back to Orange for a swap for a replacement handset, but I would like to make sure I return it back with the original Stock ROM and SPL.
If I switch on my phone with the vol key pressed, it shows that I have:
SPL-1.56.OliNex
And I am currently using the latest MaryOne ROM.
I have downloaded: RUU_BlackStone_Orange_UK_1.14.405.3_Radio_52.49a.25.26_1.09.25.14_Ship which I believe was the original Stock ROM for my phone. It appears that this ROM is the older 1.14 version.
Before flashing my device with this ROM, do I need to downgrade my SPL first? Or is there a way to make the phone use the Stock SPL? (The reason I ask this is because I remember reading the "dummies guide" and it said that in order to use the newer 1.56+ ROM's I had to upgrade the SPL, so my guess is I may need to downgrade now to install a 1.14 ROM?)
Could anyone clarify for me?
Thanks,
WizzKidd
Click to expand...
Click to collapse
You are correct, if you are using a rom based on 1.14 you need to match the SPL or you'll get screen issues etc. You can either use HSPL 1.14 or return stock 1.14 SPL. All info can be found in this thread including how to return to stock rom & SPL (bottom of first post - section called 'How to reflash Stock/Shipped SPL - STEP BY STEP - FOR WARRANTY REASONS ONLY!')
Post further queries in that thread
Thread closed
Hi everbody
I used HARDSPL to flash cocked roms on my X1
the point is I have to send it to repair the keypad, I tried SE update center to flash the stock 6.1 ROM, but it didn't work as I expected, so I flashed the stock RUU_SIGNED from the sticked Hard SPL thread here, tried to update again using update center, and bingo, it's working, but my point is, what should the boot loader screen now be showing, mine shows
"KOVS110
SPL-0.78.0000
MicroP1-787
MicroP1-707"
any problems if I sent it to the repair center now?
thx
Maybe this topic can help you to find out how to restore SPL
read "how to restore Stock SPL for warranty reasons."
http://forum.xda-developers.com/showthread.php?t=431218
thx dreaminside
yes, I already did, I followed it
but I don't know if I succeeded or not
oh sorry for that
i forgot the default SPL number too.
http://forum.xda-developers.com/showthread.php?t=497511
4. How To Install The Stock Rom (For Warranty Reasons)
Download .mov file here 31mb (Quicktime Format)
try this one , maybe it will help you find out
black heart said:
Hi everbody
I used HARDSPL to flash cocked roms on my X1
the point is I have to send it to repair the keypad, I tried SE update center to flash the stock 6.1 ROM, but it didn't work as I expected, so I flashed the stock RUU_SIGNED from the sticked Hard SPL thread here, tried to update again using update center, and bingo, it's working, but my point is, what should the boot loader screen now be showing, mine shows
"KOVS110
SPL-0.78.0000
MicroP1-787
MicroP1-707"
any problems if I sent it to the repair center now?
thx
Click to expand...
Click to collapse
you're fine, that's how it should look like.
(actually, you reflashed stock-spl 0.72 and SEUS updated it to 0.78)
if you still had hard-spl on it, it would read "0.72.OliNex".
edit:
did you flash a stock-rom first or not? you should do that BEFORE flashing stock-spl... (in case you're using a custom rom)
Thanks dreaminside
caliban2 said:
you're fine, that's how it should look like.
(actually, you reflashed stock-spl 0.72 and SEUS updated it to 0.78)
if you still had hard-spl on it, it would read "0.72.OliNex".
edit:
did you flash a stock-rom first or not? you should do that BEFORE flashing stock-spl... (in case you're using a custom rom)
Click to expand...
Click to collapse
well, I couldn't flash stock rom using SEUS without first flashing Stock SPL, so yeah, I flashed SPL first, then ROM, but boot loader is still showing the same msg, so am I still fine ??
black heart said:
Thanks dreaminside
well, I couldn't flash stock rom using SEUS without first flashing Stock SPL, so yeah, I flashed SPL first, then ROM, but boot loader is still showing the same msg, so am I still fine ??
Click to expand...
Click to collapse
well, if SEUS didn't complain...
concerning the bootloader-figures you're fine.
Looking at your SPL its looks like you've been successful