I just finished installing hero
but its looping at the hero Logo with the little android guy
Did i do something wrong or is it just booting up
for the first time???
Its been about 5 minutes now please help me out
ps i didnt repair eternal system files before wipeing/flashing
you think this is why???
If it takes more than 10 you should try rebooting. If it does it again then try wiping and reflashing it
Builds normally take anywhere from 5-10 minutes to boot up the first time. This is due to them setting up some framework before they begin to work.
Now, if you see it flicker and re-animate, that's a boot loop. Watch the animation closer, and if it disappears and then appears again (within a split second), then it's a boot loop. In this case, make sure you have the correct SPL and Radio installed.
well heres what it does
its at the screen after the TMO G1 screen
Now it animates HERO
then the little android guy waves Etc..
then it goes black then rpeats this
Boot Loop
or Wrong SPL/Radio(i dont think so i had 2.22.1.216, and the spl was 1.33.2005
Yup, that's a boot loop. Try wiping/reflashing, and see what you get. Which build of Hero are you using?
iM using JAChero 2.6.3
but ididnt repair the ext sys files b4 wipeing/flashing
as instructed
you think this is why its looping
considering i have right spl/radio
should i
repair
wipe
then flash
watchyaself said:
iM using JAChero 2.6.3
but ididnt repair the ext sys files b4 wipeing/flashing
as instructed
you think this is why its looping
considering i have right spl/radio
should i
repair
wipe
then flash
Click to expand...
Click to collapse
In your other thread you said you were setting up your partitions with Paragon.. Are you sure you got them correct?
FAT32 - Ext2 or 3 - Linux swap ?
If a wipe / flash doesn't fix it, try redoing the partitions.
If you have Cyanogen's recovery, click the "Partition from the phone" link in my sig, it'll show you how to do it all.
Oh yeah.. When you have a new question on this issue (partitioning your card and flashing Hero) just post it as a reply in here, instead of starting new threads and editing your old ones. Makes it hard to follow what you've tried already if you keep changing it up.
Related
I think i bricked my phone by fallowing this tutorial.
http://forum.xda-developers.com/showpost.php?p=3874647&postcount=406
It happened after flashing the spl.
My phone will not go past the white "t-mobile g1" splash screen.
thank you for reading.
Damn, another brick? Did you make sure you had a PVT board and not the DVT-1, DVT-2 boards? It's a known problem with the Special SPL that it pretty much bricks DVT board phones...at least so far. (check by booting with camera+power if possible, board type is shown on the first line of text)
Can you boot using home+power? Are you just stuck at the Splash screen? If so, after about 10 mins the screen will change, giving you an triangle error symbol. At this point push Alt+L. This should give you the recovery utility, where you will have access to wipe (you should prob do one) and reflash a rom.
Of course this is all assuming you have root already.
i dont know if i actually got root i fallowed some tutorial on that too today i can do both of those boots but dont know how to flash anymore updates with my phone stuck like this
aronissleeping said:
i dont know if i actually got root i fallowed some tutorial on that too today i can do both of those boots but dont know how to flash anymore updates with my phone stuck like this
Click to expand...
Click to collapse
Ok, so what you need to do is this:
1. Wait for the error message //remember it sometimes takes 10 mins or so
2. open keyboard, hit Alt+L //this will toggle your phone to the recovery utility
3. If you have root, you may have a recovery utility that says "JF version 1.43", if not you have the stock recovery utility
4. If you have root, you could try to DL pretty much any rom although I might try the Ion rom for its stability and simplicity //there are tons of instructions for flashing a new rom
5. If no root, search in the Dev section of the Dream forum for an OTA ( Over The Air, ie. stock) rom. In particular, search for Dreaimg.nbh, and read the instructions for reflashing it. This will help you gain root.
6. reboot, and enjoy (hopefully)
If none of that works, you can find the "Bricked G1's" thread on the Dev section too. I think your prob out of luck, but it's possible someone has/or is coming close to a fix.
re flashing ill let you know the out come
lol you didnt brick it since u can access the recovery image.
anyways what happened to me yesterday, i flashed latest radio, the latest spl and it wouldnt boot. i flashed a new system image but still no boot (t-mobile screen). I wiped the system (data partition) from recovery boot, and reflashed with a new system image, worked ok... so from what i get, u need to wipe / reflash system, if you upgrade spl...
is by using a card reader on a pc the only way to flash a different img if this happens to you?
my phone is in root and i'm on the same g1 screen. if i take the battery out i can boot to recovery mode but my only options are alt-w and alt-s. i've tried wiping and reflashing with the same spl img and it's not resolving anything.
First off...
G1 PVT 32B
recover img1.4
new radio 2.22.19.26I
intalled hard spl, in recovery img after installing hard spl phone rebooted to recovery then at the bottem said formatting cache:.... stuck there for 15 mins so I tried Alt S to reboot, After that it gets stuck on G1 screen. I can still get back to recovery. should I try to redown load spl, is it possible I got a bad download or did I do some else wrong
maybeoneday said:
First off...
G1 PVT 32B
recover img1.4
new radio 2.22.19.26I
intalled hard spl, in recovery img after installing hard spl phone rebooted to recovery then at the bottem said formatting cache:.... stuck there for 15 mins so I tried Alt S to reboot, After that it gets stuck on G1 screen. I can still get back to recovery. should I try to redown load spl, is it possible I got a bad download or did I do some else wrong
Click to expand...
Click to collapse
first boot into bootloader(camera and home) and see if you have a white screen with 3 skating androids.
if you do then you have the hard spl.
sometimes when you flash a spl it will wipe your phone.
if you do have the hard spl just go ahead and flash whatever rom you want to use.
if you don't have a card reader go into the recovery console and type ums_enable to mount your sdcard and put the rom on your sdcard then type ums_disable to unmount the sdcard, then finally type reboot recovery and when it boots up flash your rom.
That did it David just uploaded CM 4.0.4 and its up and running. You have been alot of help tonight, kick you a little something for your help...
wait , you push alt-s, are you still using the orignal recovery, do yourself a favor and flash cm recovery 1.4, nandroid backup and restore, flash any zip.
maybeoneday said:
That did it David just uploaded CM 4.0.4 and its up and running. You have been alot of help tonight, kick you a little something for your help...
Click to expand...
Click to collapse
thank you very much
Thanks!!
I was having the same issue... ( I have the pimped recovery as well)
The first couple times I tried, I was getting no changes to the spl...
I tried one more time, wiped to be sure, proceeded to install spl
I then made it to same point, "formatting cache..."
I decided to start the reboot process and quickly pressed
"cam + power" when the screen went black and BAM,
got the 3 skateboarding androids
and it says "HSPL 10.95.3000"
I then reinstalled latest Cyan, and partitioned the sdcard with sdparted.txt
8gig Class 6 (100MB Swap, 1024MB ext4, 6893 Fat32)
Rebooted and
Thx!!
I am trying to unroot my friend's G1... I found a tutorial on XDA (link) and it worked fine without any problems on my phone, however when I go into recovery mode (CyanogenMod v1.4+JF) and I hit Alt+S, it starts to install the update.zip and it reboots and starts up in recovery and gets stuck on Formatting CACHE:... I've let it sit for quite a while and still nothing. I can reboot the phone, but it just starts back up in the rooted mod. When I start into the bootloader (camera+power), it's not the three android's on skateboard, it's the colored screen, and it doesn't give me the option to install DREAIMG.nbh file. I'm not quite sure what to do, especially since I had absolutely no problem testing this tutorial on my own phone.
EDIT: I figured out that the bootloader is downgraded and working. Now when I load the bootloader, it goes to the grey screen and says Loading... No image found! I have searched the forums and google for a solution to this program and so far nothing I've found is working. I've reformatted my SD card many times to FAT32, as well as redownloaded the DREAIMG.nbh file... Any help would be great!
EDIT 2: I'm not sure what the problem was or what I did to get it to work, but after formatting over and over and downloading and redownloading, and trying different SD cards, it finally started to work.
Ok. I have done everything that was suggested up above. I also get the 3 android skateboarders and I have tried to install the new
[ROM] CyanogenMod - Keeping You Legal For Less (STABLE) [UPDATED 10/31 - v4.2.3.1]
Which installs just fine. But then I reboot the device and it continues to be stuck on the G1 Splash Screen.
I can verify that I updated the Radio first and confrimed it was updated then updated the SPL and got formatting cache and waited like 15 mins and then now I am stuck.
So I what david1171 suggested and still nothing.
Any suggestions would be nice.
Thanks
Hey peeps, hope somebody out there can help. I have quite a strange problem and have tried everything I know to sort it with no luck.
Ok before I start I just want to say I'm not playing the blame game, it was probably an unhappy coincidence it happened at the time it did.
I was on kingk's 2.0 hero rom, but decided i'd try maxisma's, so I wiped, formatted ext, flashed maxisma 2.0, then 2.0.1 which had just been released as a fix. Rebooted the phone. Everything was going smooth, I got a little flash of the notification bar same as what happens with every hero rom I've tried, then I got FC on messaging, then the phone froze. Thinking nothing of it, reboot, reflash after a wipe, but I repaired ext after wiping it. Flashed 2 and 2.0.1, then rebooted. Phone got to htc logo, then froze for a few seconds before going back to the animated android. Ok, this rom needs more time in the oven I thought.
I then wiped, formatted and repaired and flashed kingk's rom back to my phone, boot loop
I tried mlign, boot loop
I tried xrom, boot loop
I flashed htc image and then cyanogen's rom, finally got booted.
I've spoken with MikeTaylor (he has the patience of a saint, buy him a beer, I did) and he suggested clearing the dev folder, I tried and was prompted with "device or service in use" so that didn't work. I even thought going back to stock would help, but it didn't. I then thought it had something to do with the SPL, cyanogen's being the only rom not needing haykuros, so I flashed "the official donut" which also gave me a boot loop.
So here I am, asking for any suggestions, and I'm willing to try anything.
Many thanks in advance for any help, and I hope when I get fixed, this thread isn't used anymore, we don't want more people with my problem
The only suggestion I can make is recreating the partitions on your card using parted or something like that. I had the same problem as you going from Cyan to xROM, recreated the partitions and it was fine
well, not near computer to back things up, but i'l give it a go, it's either that or fastboot erase me thinks
if it works, thanks in advance, if it doesn't then thanks for trying
senaia said:
well, not near computer to back things up, but i'l give it a go, it's either that or fastboot erase me thinks
if it works, thanks in advance, if it doesn't then thanks for trying
Click to expand...
Click to collapse
Oh, I assumed that card wouldn't mount so it wouldn't matter if you couldn't back up
So what does fastboot erase do? Wipe out /system?
i was hoping somebody here could tell me that, i've never used fastboot other than changing the splash screen and that was done using a tool, so i didn't actualy use it lol. card mounts, the flash goes through ok, but it just never boots, unless it's cyanogen mod, which i've not used for about 2 months, xrom awesomeness got to me, but i decided to try out a few hero / sense roms while JAC was out of the office, and now i can't go back to it lol
Sorted, being lazy doesn't work. I used amonra recovery to make the partitions initially which worked, then had this problem. Tried using it again and it said it worked but I still couldn't flash. When I checked manually using parted, it showed 3 partitions. Fat32, blank, and swap. Recreated the partitions and I'm now back to full flashing fun. Unfortunate coincidence it happened right after flashing maxisma's 2.0.1
So I have this g1 sitting here for a few months- great looking phone, not a scratch on it...total virgin- no water damage or anything... a true spectacle compared to me daily driver (water damaged g1 with cm 5.07 on it... broken camera, broken wifi module <or so i am guessing since its been that way through all of the different roms ive tried... just shuts off> )
Back to the point-
This spectacle of a g1 - has but one issue... the digitizer doesn't work. No clue why- just wont respond... the g1 has been wiped so I have been stuck @ a "touch the android in its naught spot to continue" screen for a while...
Just decided today that I would try and get cm 5.07 on it... I was remembering (correct me if I am wrong) that android 2.1 didnt bother you with that "touch me" screen when you first booted it up.
So I began with a wipe through recovery- ... formated my sd to fat 32, and threw my DREAIMG.NBH (RC29) on it.
hit the boot loader (camera + power) - boots up as normal- grey screen for the update, and continued with it. Got an OK on each item down the list...looking good.
Update done- hit the power button to finish it- goes back to boot loader displaying the rainbow screen with:
DREAM100 PVT 32B
HBOOT-0.95.0000
CPLD-4
RADIO-1.22.12.29
Sep 2 2008
Serial 0
--
So at this point its all looking great to me- I hit call + menu + power and phone begins to reboot.
But gets stuck @ the freaking tMobile G1 Screen...
I can still access the boot loader... but Ive tried 6 different downloads, re formatted the sd card 3 times, tried a second sd card... tried a copy of RC30 ... nothing works... I get stuck at the G1 screen every time.
I cannot access recovery! Just sticks at G1 screen.
What now? Is this G1 a paper weight?
THANKS!
I don't know if this works with a stock rom, but did you try to get a logcat while it hangs at the g1 screen? Might be useful...
Logcat
I cant do anything :/ Only ability I currently have is to boot the phone via fast boot with a DREAIMG.NBH or sit at a boot screen.
Is there a modified DREAIMG.NBH I should try and run?
Thread moved to Q&A.
pcguru000 said:
This spectacle of a g1 - has but one issue... the digitizer doesn't work. No clue why- just wont respond... the g1 has been wiped so I have been stuck @ a "touch the android in its naught spot to continue" screen for a while...
Click to expand...
Click to collapse
I had a G1 refurb from HTC on which the digitizer did not work properly. No matter what ROM I installed, same problem, no accurate touch response. It was a hardware issue with the phone. I know it doesnt help with the phone hanging on boot. As far as that, it's a tough one. If you only have the stock SPL (rainbow screen) and no modded recovery, you can't do much other than use a .nbh (release key signed ROM/stock ROM) to flash a ROM. Unless there another backdoor I'm unaware of. Good luck!
CM roms need danger SPL, if you're on the "rainbow" screen - you don't have it. You shou've not run NBH because that takes away the root and brings you back to RC29. Sound's like you're out of luck on this one. However, now would be a good time to swap out that digitizer for the one out of "mother-of-all-problems" phone.
Good luck.
danger
I know CM roms need Danger- but at the point I was at I had no way of flashing danger, I needed to first root the phone... the way I have rooted all my G1's was using RC29 first (DREAIMG.NBH) and then using the "type anywhere" exploit to give the phone root administrative rights.
After that i load up a good recovery image, do a nandroid back up etc etc...
Im just not sure why it just died half way through the process- its strange that I can still access the stock boot loader and flash an image but yet nothing happens.
Is it possible for me to flash an image OTHER than RC29- and where could I access that image download?
pcguru000 said:
I know CM roms need Danger- but at the point I was at I had no way of flashing danger, I needed to first root the phone... the way I have rooted all my G1's was using RC29 first (DREAIMG.NBH) and then using the "type anywhere" exploit to give the phone root administrative rights.
After that i load up a good recovery image, do a nandroid back up etc etc...
Im just not sure why it just died half way through the process- its strange that I can still access the stock boot loader and flash an image but yet nothing happens.
Is it possible for me to flash an image OTHER than RC29- and where could I access that image download?
Click to expand...
Click to collapse
That all sounds like it should be working but I would try one more thing. You say you have a second G1. I would try formating the sd card in that phone. It may make a difference. If that does not work you may want to search this forum for "gold card" instructions.
Good luck.
Hey guys i don't know if anyone of you had the same issue but any info/help could be helpful.
I used to flash my N1 A LOT! but today i have this strange issue. I wiped and flashed rodriguezstyle again for a clean start, but i only got the colorful X with the unlocked symbol at the bottom and then just a black screen. i thought I've done something wrong and flashed again, but with the same results.
i changed my sd and downloaded again the rom but still no luck, did a nandroid restore and the phone was working properly. then i got a bit frustrated. downloaded 2-3 more roms but the result was the same.
i read somewhere that flashing with battery <50% may cause some errors so left the phone off to fully charge and tried again... no luck
then i remembered i upgraded the radio and i downgraded it to the old one, but still the same results and nandroid doesn't work... jeeeesh... back to the new radio and to my nandroid, but its no fun owning a smart-phone if you cannot flash it.
anyone with the same issue or any helpful tips/instructions?
Try this:
When the phone hangs at boot, reboot to recovery, wipe cache and dalvik-cache and reboot from recovery. Does that work?
If not, you'll need to logcat the boot process and post the log somewhere for us to have a look at.
So, assuming adb is working on your computer, plug in via usb, use adb logcat > output.log and reboot the phone. Continue logging for about 60 seconds after the phone stops.
Post the log to www.pastebin.com and then link back here.
hmmmm ok i will post results in abt an hour. thanx!
hmmmm i think i sorted it out... reflashed recovery. propably i messed smthing in there! thanx for your effort!
Hello everyone!
Weird problem here, too.
I was backing up my SD card in view of a format/cleanup....and when I went to boot into recovery, my N1 was stuck on the black screen with the white letters at the bottom "Build : RA-nexus-v1.7.0.1"... The phone actually boots great, it is just not loading the recovery image. Is it possible that part of the flash got corrupted? If so, I'm pretty much done flashing my N1, right???
I'll post a log asap (if it could help any)...
Oh and btw i tried to re-flash Amon-RA's recovery twice already...Superboot said it was successful....but I doubt it...
Well try flashing stock rom! I flashed it through fastboot step by step and it worked. Also check if the rom you try to flash needs ext partition or if apps2sd is enabled
Sent from my Nexus One
Test
Sent from my Nexus One using XDA App
Thanks nica.
I had to flash stock boot and rom to fix it...
Sent from my Nexus One using XDA App