Cyanogen Recovery Console - G1 Q&A, Help & Troubleshooting

So I flashed the image/update and I'm still getting the original recovery screen. Could there be something I missed?

Sorry I figured it out, this can be deleted or closed now

Correction, I just rebooted my phone after using parted to make my partitions on the SD card and it has reverted back to the default recovery screen once again.

Which way did you flash it? Flash_image or the update.zip file?
Recommend doing: (with cm-recovery-1.3.1img on your sdcard)
Flash_image recovery /sdcard/cm-recovery-1.31.img

The first couple times I did the update.zip then I got frustrated and flashed the raw image file. It worked that time. After I rebooted I went back to make sure all was well and it was back to the original recovery screen

Yaboiaj said:
The first couple times I did the update.zip then I got frustrated and flashed the raw image file. It worked that time. After I rebooted I went back to make sure all was well and it was back to the original recovery screen
Click to expand...
Click to collapse
Have you tried it again since?

It worked again this time. I'll wait a little while, reboot, and then check to see if it is still ok. Thanks

Related

Not completly bricked

Hi guys im wondering if any of you can help me out here.
I have been on cyanogen (latest) for a while but decided to have a go at puting the ''donut'' rom in the android development bit of this forum (eu version as im in uk) on my phone this evening.
I flashed the base version fine and it started up great. Then I flashed the extention (add on) part and it started up but after the ''android'' screen it just went black and nothing happend. So i did a hard reset and tried again, same problem occured.
I then tried to put the latest cyanogen rom back on my phone, put to root, started it up then BAM stuck on g1 screen. Didnt get passed it. So put other roms later cyan roms on and still same problem occurs.
I then freeked out and tried to go back to RC29, so i deleted everything of my sdcard and put the dreming file on, pressed power and camera button and then BAM it comes up with some sort of cyanogen screen and not the rainbow screen. So havent got a clue how to install the dreming file. So gave up there
So this is where im at. Nothing on my sd card. Still got cyan on my phone but cant get it started up, no matter what rom I try it keeps getting stuck on g1 screen.
I know this is completly retarded but I really need help to get this sorted.
ANY HELP WOULD BE GREAT
Thanks
Have you been wipping?
Wiped before flashing donut rom...And when trying to put cyanogen rom back on...
If you can boot into recovery or into fastboot then you should be fine.
Wipe, if you use appps2sd the wipe your ext partition as well.
Flash base defanged rom from Cyan's site and flash Cyan's latest (Check md5 sums of both to make sure that your downloads are not corrupted. Fix permissions and you should be ok. If you still can't boot up (and it will take a while to boot up after a wipe) then you can go back to RC29. Just make sure that your nbh file is named exactly Dreaimg.nbh and your card is formated to FAT32, otherwise fastboot will not find it.
Good luck.
borodin1 said:
If you can boot into recovery or into fastboot then you should be fine.
Wipe, if you use appps2sd the wipe your ext partition as well.
Flash base defanged rom from Cyan's site and flash Cyan's latest (Check md5 sums of both to make sure that your downloads are not corrupted. Fix permissions and you should be ok. If you still can't boot up (and it will take a while to boot up after a wipe) then you can go back to RC29. Just make sure that your nbh file is named exactly Dreaimg.nbh and your card is formated to FAT32, otherwise fastboot will not find it.
Good luck.
Click to expand...
Click to collapse
Wow lots of help there thanks.
Firstly tho I cant find this ''base defanged rom'' from cyans website? Can you give me a pointer as to where it is? Is that its name on the website or is that it in short?
Forget that I found ''DRC83_base_defanged.zip''. Downloading it now.

I Think i trashed my recovery.... =(

so i tried to update my recovery image on my cdma hero. i am currently running 2.3.3 freshROM and everything works fine, but i was gonna try out a froyo rom for the heck of it and decided i would update my recovery first.
well it failed with a lot of out of memory error, and now if i hold down the home and power buttons like i normally do, it just sits at the white htc screen until i pull the battery. it does still boot into the rom though, no issue there and i can still boot into the bootloader via adb.
Am i correct to assume that at this point if any thing happens to my phone it will be toast as i do not have a recovery image?
would anyone want to point me in the right direction of fixing this issue?
i did some forum searching but i couldn't find the exact info i was looking for to restore my recovery image to a working usable state. nothing works.
What recovery image were you putting on?
If no one else can come up with a fix or a suggestion, I'd RUU back to the .5 stock rom and start over. Once you get that far and root the phone and put the recovery back on, go into nandroid and do a restore from the last backup you made.
Sounds like maybe you didn't adb remount before flashing. Try flashing it again, and make sure you found it in these hero cdma forums.
Sent from my Hero CDMA using XDA App
Dave2582 said:
What recovery image were you putting on?
If no one else can come up with a fix or a suggestion, I'd RUU back to the .5 stock rom and start over. Once you get that far and root the phone and put the recovery back on, go into nandroid and do a restore from the last backup you made.
Click to expand...
Click to collapse
i used recovery-RA-heroc-v1.6.2-blue.img i dont think i remounted the sdcard first like the second replier said. i think i am just going to revert back to the .5 ruu and re root then reflash all over again. i knew i was missing a step. i am just thankful that the phone booted into the main rom still thank goodness because i would have been lost without it! thanks for the advice, i figured that would be the easy way to do it.
Go to market, get clockwork mod.
Then go back to your old ra.
No need to ruu.
I had the same problem and fixed it this way.
ROM Manager by clockworkmod.
Can't you just reflash while booted in the ROM?
Jus10o said:
You can do it booted in the rom.
Just put the recovery.img on your sdcard NOT in a folder. And type this
adb remount
adb shell
cd /sdcard/
flash_image recovery recovery.img
reboot recovery
Make sure you type the name exactly as its on your sdcard caps and all.
Click to expand...
Click to collapse
This way you don't have to start from scratch.
Don't bother using Amon_RA's recovery. I've found that ClockWork MOD has MUCH MUCH MUCH more features. It can also flash unsigned .zip files, so hopefully we'll no longer have to sign stuff in the future

[Q] Stuck on SPRecovery; can't flash Clockworkmod recovery

Is there an sbf to flash clockworkmod recovery similar to the SPRecovery file used in the "how to root any droid regardless..." method? I've tried flash_image from terminal but get a not found error even though i know the clockwork.img file is right there at /sdcard. RomManager reports that it's flashed clockworkmod but when i reboot into recovery there's SirPsycho's green droid. Some alternate method to change my recovery back to clockworkmod would be greatly appreciated.
Background: Last night I restored my original rooted 2.1 nandroid backup to retrieve some notes and got distracted by a phone call and left it on too long. Maybe I missed my chance to avert disaster, so be it, but when i picked up my phone it was at the "ready to install update" screen and i *think* i just turned it off and tried to reboot into recovery. ( i was still distracted ). I became undistracted when i found that instead of good ol' CWR i had the white triangle / phone icon and no user recovery. So I sbf'd SPR onto it, then the busybox/su/root file, then rebooted, opened RomManager, flashed CWR, set up a restore to my current CM6.1RC3 and let it reboot. No joy; SPR came up instead and just sat there. Since then i've gone back into RM and "reflashed" CWR a few hundred times, tried several times to unsinstall and reinstall RM (same result). I've also downloaded the correct CWR.img file and tried to flash it from terminal emulator, no joy. I've tried using ROM Manager to flash an older version of CWR and can't, getting "An error occured while flashing your recovery."
lol i've also (inadvertantly/frustratedly) ended up removing the recovery altogether (probably from accidentally initiating an SPR backup and then battery pulling when it was an hour later and still not finished); after that booting while holding the "X" was stuck at "M"; but reflashing the SPR file from RSDLite got me the SPRecovery again.
When I have freshly flashed the SPR.sbf file, or flashed alternate recovery in RomManager, it reports SPR as the current recovery, and when i "flash" CWR from RomManaGER, it changes and reports that CWR 2.5.01 is the currently installed recovery, but no matter what i've tried, when i boot into recovery the text is blue not green. grr.
i've searched quite a bit before posting and am quite frustrated at this point. i've got a bazillion nandroid backups, but they are all clockwork and not SPRecovery format. The only way I now seem to be able to flash a different recovery is via RSDLite.
SO, either an sbf file to flash ClockworkModRecovery, an alternate way to change my recovery, or if there were some way to use SPR to restore from a nandroid backup created with CWR, but i'm not sure if the recovery itself is in the nandroid backup?
not pulling my hair out yet, but quite a bit past simple frustration.
TIA!
nevermind. after trying everything including reformatting my SD card, i took the latest update to RomManager and it successfully reflashed CWM. lol 69 views. Thanks for the tips.
Clockwork only sbf
Teddy helped me immensly on droid-forum when i had this issue, but i came across one of the things i could have used back then recently so wanted to post it up here if anybody else ends up in this situation.
Here's an .sbf that will reflash clockworkmod recovery, from Raidzero's thread on his RZRecovery:
http://rzdroid.com/ftp/recovery/Clockwork_2.5.0.1_sholes_recovery_only.sbf
CWM for Milestone?
Are U sure?
No, not at all. Forgot this was a combined device forum; I'm only talking about the Droid.
If all the recoveries and tools I've mentioned work on a milestone too I don't know. Apologies for not being more specific.
Sent from my Droid using Tapatalk
No problem... just that milestone uses Open Recovery...
Sent from my Milestone using XDA Premium App

Nook Color Only boots into clockwork recovery

Is there a way to get rid of the clockwork mod boot on the nook color
As per onstuctions on this site, I got a 1.1 pre roote version and installed it
from the sd card with the clockwork menu which informed me that the
"NookColor" install complete.
when I reboot, it starts with the welcome message,but then only reboots into the same recovery menu.
At this point I would just like to go back to a stock rom, but cannot boot anything but the recovery.
By the way, I can boot froyo from the sd card
Please help me
I've moved your thread to the correct forum.
So you dont have the CWR sdcard in? Because if you did, you would need to remove that first. Sorry if this dumb, but thats all I can think of right now. Maybe reflash the 1.1 pre rooted rom? Or follow the instructions in Samuelhalff's "Easily restore to stock" thread located here in the Nook forums.
The "Easily restore to stock" saved the day. I am now up and running.
Thanks
How did you do that? I have CWR on mine and I went to buy a book from the shop on the Nook and it downloaded and installed 1.1... Now when I try to go back and restore from backup CWR doesn't respond... All it does is sit there and if I select something from the menu it goes to the background image (the circle with the top hat) and sits there. I would like to remove this so I can reroot my Nook...
Thanks for any help.
Bob
See the other thread or sticky that's labeled "How to Restore to Stock easiliy." I believe you can also use the power down and on 8 times trick to restore to stock as well.
Same thing happened to me. I used Clockwork to flash the CWR-removal.zip on the restore thread mentioned above and it fixed my boot, everything else was OK.
porear said:
Same thing happened to me. I used Clockwork to flash the CWR-removal.zip on the restore thread mentioned above and it fixed my boot, everything else was OK.
Click to expand...
Click to collapse
Ditto that. I reinstalled CW and everything seems to be working fine. Has anyone else had issues with using Rom Manager on the NC? I've had to go back to stock twice whenever I've used it.
I had a problem when trying to roll my 1.1 rooted NC back to stock because I futzed it up that I ended up in a CWR loop. 8 resets didn't get me a reflash, it got a recovery. Took me finally getting the NC flashed and rerooted at 1.1 a second time when I reinstalled ROM Manager and ended up with the problem again. Took me this wasted effort to realize that CWR runs in lieu of the reflash if CWR is installed and that's an obvious problem when I wanted a reflash and not restore a different backup.
There is a thread with a zip that CWR can run that blasts CWR off and reflashs stock and getting that done put me back both times I messed up above.
Seems to me that perhaps the whole "can never brick" response when people ask for help needs to have an addendum about how CWR gets in the way of an 8 reboot reflash and provide guidance on how to get that update file and use it instead to get back to square one. (Plus some advice on when to clear caches and data partitions to avoid weirdness later).
Now rerooted on 1.1 with no ROM Manager running but I'm missing the nandroid bacjup capability, so maybe I reinstall but stay away from the recovery option until I need it?
I reinstalled CW after I rerooted 1.1 and have had no problems with it so far, but I also haven't tried to backup or anything since the first time (which initially got me into this mess).
I do think you're right about having some sort of addendum thrown in. I was running circles around the XDA forums for a few hours trying to find some sort of fix the first time my Nook started acting weird. The 8-reboot trick just wouldn't work, and my battery was more or less drained because CW was interfering. Maybe this is just understood by most, but it certainly would have saved me some time (and some gray hairs) if someone had mentioned it earlier.
So what is the conclusion of this thread? I have a new NC, updated to 1.1 and installed AutoNooker 3.0, immediately installed Clockwork and did a NAND backup... bad thing is that it won't boot off the eMMC anymore, only CW.
I can boot roms off of the SD card (ie Honeycomb) but this isn't want I want. I've downloaded and flashed several roms but its looped at CW. So the rom isn't the problem.
If we can't install Clockwork Recovery, then how can we flash new roms to the eMMC?
[UPDATE]
Found a flashable file which removes Clockwork Recovery.
http://www.etoile-laconnex.com/CWR-removal-rootsafe.zip
After I flashed that I am now booting off the eMMC froyo rom. Nice! Saved me from Restoring it, updating it, and reRooting it.
[UPDATE 2]
Well while it worked initially, it loaded the homescreen and reset. Now it is stuck at the "Touch the Future of Reading" screen with no Recovery... which worse off. Now I have to make a CWM bootable SD, flash the restore, and start over. Nice.
[UPDATE 3]
Finally got it back to stock after hours. I found a "MonsterPack" here:
http://forum.xda-developers.com/showthread.php?t=922870
Even this was more complicated then it needed. I had to download the 128mb RootPack image, and get it going so I can grab the needed root files. Then download the right size Clockwork image for my memory card and get it going. The end result ended in a Clockwork SD card. Then I made a "sdcard" folder from where I added the rootpack files and the stock image 1.0.1 flashable zip file.
Format the system and boot partitions, then flash the stock zip.
I just upgraded stock to 1.1, then will proceed to boot off the microsd and root, install GAPPS, etc.
I wish I knew of a great custom rom to flash. I flashed Nookie Froyo 0.6.8 and it powers down immediately (several complaints about this). Maybe CM7?
Ditto
I'm having this problem as well, but I can't seem to do anything to fix it. I was running 1.1, and auto-nootered using v3.0. Everything was hunky dory until I installed CWR. I flashed, shutdown, restarted, then chose to perform a backup which brought me down into CWR and I was never able to get out. I used the Monster pack zip to remove CWR, and now I boot to the "n" screen and sit forever. I tried the 8 hard resets and it said it installed on two different occasions, but still I sit on the "n" screen during boot. I tried the 1.0.1 restore zip as well, but to no avail. What do I need to do to get back up and running?
CW Recovery only
So I flashed my NC with both the pre-dualboot and the dual-honeycomb rom, but every time I reboot with the SD card inserted, it only boots to CW recovery. When I take it out..it boots to NC stock OS.
Am I suppose to remove clockwork recovery with the CW-removal zip? I tried that.. once it rebooted it went right back to CW. Should I be using two different SD cards? One for CW recovery and one to load the eMMc?
So confused...
What I need to know is what should be on the SD card after everything is flashed.
Mw : you could use a bootable cwr sdcard and flash 'emmc recovery repair', then format data and restore your backup.
Ehamonn: you have to remove cwr from the sdcard. Format should do the trick. But you'll loose the data on it..
Sent from my Desire HD using XDA App
Do I need to keep a boot image on the card after I format?
Well, if you only want to boot from internal memory, no.

Please Help S-on Bootloop

I have no idea what happened, my Hero has been rooted for over a year now and never had any problems. I flashed a herodeck rom version 1.2 and after that I could not flash any more roms but could restore all my nandroids. So I used this, RUU_Hero_C_Sprint_2.27.651.5_R_signed_release.rar, to go back to stock and installed unrevoked, and all went well. I then flashed this TeamHeroC-2.3.5-01OCT-CM-V2.zip and finally it worked and was working great until last night my battery went dead and when I plugged it in to charge it powered up to the white HTC screen and has been stuck there since. I have tried to reflash , restore nandroids, and even hboot a HERCIMG and that is when I noticed S-ON. and since this has happened every file I try to flash comes up corrupt and the latest CM rom came up no signature, and I keep getting errors such as this. So right now all I can do is boot into recovery or Hboot. Please someone help me with this. I love this phone!
williams1978 said:
I have no idea what happened, my Hero has been rooted for over a year now and never had any problems. I flashed a herodeck rom version 1.2 and after that I could not flash any more roms but could restore all my nandroids. So I used this, RUU_Hero_C_Sprint_2.27.651.5_R_signed_release.rar, to go back to stock and installed unrevoked, and all went well. I then flashed this TeamHeroC-2.3.5-01OCT-CM-V2.zip and finally it worked and was working great until last night my battery went dead and when I plugged it in to charge it powered up to the white HTC screen and has been stuck there since. I have tried to reflash , restore nandroids, and even hboot a HERCIMG and that is when I noticed S-ON. and since this has happened every file I try to flash comes up corrupt and the latest CM rom came up no signature, and I keep getting errors such as this. So right now all I can do is boot into recovery or Hboot. Please someone help me with this. I love this phone!
Click to expand...
Click to collapse
Check md5sums of the zips in your sd card to verify no corrupt files. Also make sure signature verification is not toggled in CWM.
dastin1015 said:
Check md5sums of the zips in your sd card to verify no corrupt files. Also make sure signature verification is not toggled in CWM.
Click to expand...
Click to collapse
Thanks for the advice, I will check the Md5sums but I am actually using darchstar's RA recovery at the moment. Also I have formatted my sd card a couple of times and ran disk check on it and also downloaded the roms and files several times.
Hi,
If u have the time, unroot the same way again and then reroot but this time use ROM manager(free version). Update to latest recovery and then
Start over.
It sucks but without the proper knowledge its difficult to fix some issues. So starting over is easiest.
Good luck
V'sHERO on Tapatalk
I'm having the same problem but I cant even flash the stock ROM.
blacksapphire08 said:
I'm having the same problem but I cant even flash the stock ROM.
Click to expand...
Click to collapse
Can u flash anything else?
If so, u may just have a bad download or u have to do at least a factory reset b4 flashing anything.
Good luck
Unroot zip file is also EZ if u just want stock out of the box back on ur phone.
V'sHERO on Tapatalk
vidaljs said:
Hi,
If u have the time, unroot the same way again and then reroot but this time use ROM manager(free version). Update to latest recovery and then
Start over.
It sucks but without the proper knowledge its difficult to fix some issues. So starting over is easiest.
Good luck
V'sHERO on Tapatalk
Click to expand...
Click to collapse
Again thanks for the advice but I can't even do that now as I am stuck on the HTC screen and all I can do besides look at a white HTC screen is boot recovery (darchstars RA recovery) and boot into bootloader. Everything I try to flash will not verify for some reason or another(corrupt or unsigned or something crazy like that) and the RUU will not connect to the phone because it is stuck at the white HTC screen. This one has really stumped me as I have brought this phone back from some bad predicaments, or at least I thought they were. I did get it to try and flash a hercimg of an extracted RUU that is on this forum but it ends up saying no image found and just goes back to the bootloader menu.
williams1978 said:
Again thanks for the advice but I can't even do that now as I am stuck on the HTC screen and all I can do besides look at a white HTC screen is boot recovery (darchstars RA recovery) and boot into bootloader. Everything I try to flash will not verify for some reason or another(corrupt or unsigned or something crazy like that) and the RUU will not connect to the phone because it is stuck at the white HTC screen. This one has really stumped me as I have brought this phone back from some bad predicaments, or at least I thought they were. I did get it to try and flash a hercimg of an extracted RUU that is on this forum but it ends up saying no image found and just goes back to the bootloader menu.
Click to expand...
Click to collapse
Try downloading a recovery from Dastin's thread. Rename it HERC.IMG and place in the root of the SD card. Bootloader and flash. Power down then hold home and power back up to see if recovery worked. See if you can get any recovery flashed at all and if you do you can fix anything then.
¦¦self proclaimed resident prick¦¦
I finally got clockwork recovery 2.5.0.7 by using adb to push to sd card and then flashing from adb. Still can not do anything else, it is still acting the same.
http://forum.xda-developers.com/showthread.php?t=1063843
Try this there's alot of good links.
Sent from my DROID3 using xda premium
You might want to try getting s-off via darch's method. Then flash the eng-spl. Then do a fastboot erase system -w. Then reflash your recovery to see if that helps. If you need any of the files mentioned just pm me and I'll send you a dropbox link. You should be able to get back up and running this way. Good luck.
Locked & Loaded
""Shooter on Deck""
laie1472 said:
You might want to try getting s-off via darch's method. Then flash the eng-spl. Then do a fastboot erase system -w. Then reflash your recovery to see if that helps. If you need any of the files mentioned just pm me and I'll send you a dropbox link. You should be able to get back up and running this way. Good luck.
Locked & Loaded
""Shooter on Deck""
Click to expand...
Click to collapse
Ok I downloaded 1 of the zip files for darch's eng spl because the first link sems to be down. But I transfered the zip onto my sd card with card reader/writer and computer and then flashed it with clockwork 2.5.0.7 and I now have s-off again finally. So before I do anything else I am going to wait and se what you guys think I should do now. Thanks for all the help guys
williams1978 said:
Ok I downloaded 1 of the zip files for darch's eng spl because the first link sems to be down. But I transfered the zip onto my sd card with card reader/writer and computer and then flashed it with clockwork 2.5.0.7 and I now have s-off again finally. So before I do anything else I am going to wait and se what you guys think I should do now. Thanks for all the help guys
Click to expand...
Click to collapse
Are you formatting boot, system, cache, and data before flashing any of these roms? I do it 3x for each partition to make sure everything is wiped clean.
I have always thought that unrevoked was a permanent s-off unlike darch's which is temporary. I have both. I have always felt that if i can get into recovery, I'm golden. Make sure everything is wiped (not just data and cache) before you flash a new Rom.
Sent from my wildheroc using XDA App
Drunkpilot said:
Are you formatting boot, system, cache, and data before flashing any of these roms? I do it 3x for each partition to make sure everything is wiped clean.
I have always thought that unrevoked was a permanent s-off unlike darch's which is temporary. I have both. I have always felt that if i can get into recovery, I'm golden. Make sure everything is wiped (not just data and cache) before you flash a new Rom.
Sent from my wildheroc using XDA App
Click to expand...
Click to collapse
Yes, a couple of times, manually and with Light's format and Caulkin's format. and also I tried to fastboot hercimg.zip of the extracted RUU and all was going well and it actually finally asked if I wanted to apply the update like it is suppose to and it started loading and then when it finished it rebooted hboot and tried to install it again and also at this point I had s-on again. So I redone everything and am now back to s-off.
williams1978 said:
Yes, a couple of times, manually and with Light's format and Caulkin's format. and also I tried to fastboot hercimg.zip of the extracted RUU and all was going well and it actually finally asked if I wanted to apply the update like it is suppose to and it started loading and then when it finished it rebooted hboot and tried to install it again and also at this point I had s-on again. So I redone everything and am now back to s-off.
Click to expand...
Click to collapse
Are you still on a stock "sense" rom right now? What is your PRL, Radio, and PRI? Make sure everything is updated and you should be ready to go now. Since you are S-off now, I would place a HERCIMG.zip on your sd card of a recovery (I've been liking the 4.0.1.4 Orange Lantern that Dastin compiled (which is an unofficial CWM) just so that I have it at the ready in case anything goes south.
If your s-off again make a nand if you can. Also like dp asked what rom, radio, are you on???. Also imo you should flash Ra1.7 untill your back up and running for this process and just revert back when all this is done. Also you should do a fast boot erase system -w to clear everything out. Then backup your sd to your pc and format it as well. Once threw your pc and restore the defaults and then threw your recovery. Which is y I suggest Ra it makes it quick and easy. Ill check back here to see were your at threw out the day.
Edit: Pm sent.
Locked & Loaded
""Shooter on Deck""
The last rom I was on was [ROM][03-OCT-2011][TeamHeroC-2.3.7 - 2.6.35 Kernel] but I am stuck at the white HTC screen right now has been all day. When you say RA 1.7 recovery are you talking about Darchstar's RA 1.7?
Still no luck everything I try to flash fails, I kept getting an error 5 in clockwork recovery when trying to flash CyanogenMod 7 for the HTC Hero (CDMA) :: V7.1.0 (9 Oct 2011).
williams1978 said:
The last rom I was on was [ROM][03-OCT-2011][TeamHeroC-2.3.7 - 2.6.35 Kernel] but I am stuck at the white HTC screen right now has been all day. When you say RA 1.7 recovery are you talking about Darchstar's RA 1.7?
Still no luck everything I try to flash fails, I kept getting an error 5 in clockwork recovery when trying to flash CyanogenMod 7 for the HTC Hero (CDMA) :: V7.1.0 (9 Oct 2011).
Click to expand...
Click to collapse
Yes, I am.
Locked & Loaded
""Shooter on Deck""
Okay I switched recoveries to RA 1.7. I have tried several times to flash CyanogenMod 7 for the HTC Hero (CDMA) :: V7.1.0 and each time a different file comes up corrupt but I have been checking the md5's after it is on the sd card and they have been good. It is crazy, I can flash everything but Roms.
You should do a fastboot erase system -w.
Locked & Loaded
""Shooter on Deck""

Categories

Resources