My phone doesn't have bash so could someone please copy there's and give to me... my phone is cyanogenmod 3.6.5 US. Please attach
Upgrade to 3.6.8. I *think* bash is included. If not, its quite simple. Read up on it in dream development. Someone complied it and has attached it to his/her thread.
When I run debian it says that there is no file by the name of bash what do I do now
Related
As we know the LAST ROOT for TPT was not a Fully Support Version,It can not root for every one,only about 50% chance of success rate.
For those people who can not root or lost it by any reason,we can collect a new bounty here.
And please reply here leave your name and the amount willing to donate.
After someone came up post a New ROOT here and make sure no one got problem in principle.These people can get the Bounty from everybody on the list transfer to his given account .
For people who want root and have not try any root yet,please see here.
http://www.thinkpadtabletforums.com...-development/how-to-root-the-thinkpad-tablet/
If you have success,Congratulations and please donate for DAN who make this root,if you like ,see here.
http://www.thinkpadtabletforums.com...pment/bounty-for-rooting-the-thinkpad-tablet/
If you failed to root ,please came back to this post and support.
And I also will help people who don't know English in Chinese forum add list here.
Donor List here:
MOVE TO HERE
Request for this to be moved to general section if not they will close this thread since this isn't development.... just a suggestion
Sent from my Galaxy Nexus using Tapatalk
THIS POST HAS MOVE TO HERE
Thread Closed
Please contact me if you require a thread to be moved. Do not duplicate it!
Q&A for Is there a .bashrc equivalent for android?
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Is there a .bashrc equivalent for android?. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
bashrc or profile file for terminal emulator
This is a response to a thread that got redirected here BC I have fewer than 10 posts. On some custom roms the shell init file for Terminal Emulator is /etc/mkshrc. You can put an alias here like alias s='sudo bash' for example to start a bash she'll. Bash's init file is then /etc/bash/bashrc.
colinw1 said:
bashrc or profile file for terminal emulator
This is a response to a thread that got redirected here BC I have fewer than 10 posts. On some custom roms the shell init file for Terminal Emulator is /etc/mkshrc. You can put an alias here like alias s='sudo bash' for example to start a bash she'll. Bash's init file is then /etc/bash/bashrc.
Click to expand...
Click to collapse
[ Error writing /etc/mkshrc: Read-only file system ]
How do I go about editing this when it is a read only file system
Q&A for SailFishOS on the TouchPad
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for SailFishOS on the TouchPad. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Installation questions
Hello,
I want to say thank you for porting Sailfish to the HP Touchpad :good:. Soon after I saw this thread, I ordered a used device from ebay (73€). As I am now waiting for the delivery, I am preparing myself to get Sailfish to the device.
I found a guide to get CM 11 to the device on rootzwiki from "RolandDeschain79" (as I am new, I can't post links here).
In step 5b where you have to copy the CM11 files to the "ttinstall" folder of the device, what files exactly do I have to put there? I have two zip files from the first post in this thread (Cm11 and Sailfish).
Is it OK to first copy the extracted CM11 archive to the ttinstall folder and then flash android first?
How do I proceed after that?
John944S2 said:
Hello,
I want to say thank you for porting Sailfish to the HP Touchpad :good:. Soon after I saw this thread, I ordered a used device from ebay (73€). As I am now waiting for the delivery, I am preparing myself to get Sailfish to the device.
I found a guide to get CM 11 to the device on rootzwiki from "RolandDeschain79" (as I am new, I can't post links here).
In step 5b where you have to copy the CM11 files to the "ttinstall" folder of the device, what files exactly do I have to put there? I have two zip files from the first post in this thread (Cm11 and Sailfish).
Is it OK to first copy the extracted CM11 archive to the ttinstall folder and then flash android first?
How do I proceed after that?
Click to expand...
Click to collapse
TPToolBox is for installing Android only. You'll have to use the specific instructions in the Sailfish thread for anything else. I know nothing about Sailfish, so that's about all I can help you with.
shumash said:
TPToolBox is for installing Android only. You'll have to use the specific instructions in the Sailfish thread for anything else. I know nothing about Sailfish, so that's about all I can help you with.
Click to expand...
Click to collapse
OK, thank you for replying. Can you tell me, if I have to extract the zip file before copying to the folder on the device?
I still hope, someone who has done the complete procedure could answer to my questions.
John944S2 said:
OK, thank you for replying. Can you tell me, if I have to extract the zip file before copying to the folder on the device?
I still hope, someone who has done the complete procedure could answer to my questions.
Click to expand...
Click to collapse
No unzipping, leave the files as they are. That's typical for most all of the flashing you will do.
shumash said:
No unzipping, leave the files as they are. That's typical for most all of the flashing you will do.
Click to expand...
Click to collapse
Ok, thank you. That was a missing part of the puzzle for me.
I think I now have a clue how to proceed with the flashing procedure.
It's quite challenging to find all of the informations across the web to get Sailfish to the Touchpad. Since flashing an operating system to a device is always a sensible act, I don't want to do anything wrong (and eventually brick the Touchpad ).
When I have my Touchpad and everything works out OK with Sailfish, I will do a small guide for other beginners (like me).
I need someone who can compile CWM recovery for me. I would love to learn how to do that, but I'm not able to install the tools required at the moment. I'd need it compiled for my HTC One M7 using these sources:
[Mod edit: link removed]
If someone would compile it for me and also write me a little guide on how to do that I'd pay a small amount via PayPal ($5). You will also get my love.
Thanks in advance. I hope this is the right forum to request this, if not, I'm super sorry.
Please don't sell/trade on the forums, it is in violation of XDA rules.
Thread closed.
Q&A for [XAP] AdBlocker For Windows Phone 8.x+
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [XAP] AdBlocker For Windows Phone 8.x+. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Hmm, it's making a mess in a hosts file. There are no spaces and enters between each host entry. And you much fix theese 2 sources. That would be great! You can open app on github right now, we will commit the bugs.
I have just installed V4 in my Nokia Lumia 830 8.1 update 2 and when i start the app it suddenly stop.
Installation question
Hi. thank you for all your work! I have spent two days attempting to install this, and have read through this entire thread and many others before asking this question.
Trying to install onto 640 running 10586.36 in developer mode. I am a semi noob to windows phone. Have tried installing wppt and xap deployer 2.0 with no luck. Like I said, a noob. I don't know if I have not unlocked the phone as it should be or what. Under the impression that in win10mobile "developer mode" is unlocked. When I try to "launch" the xap it just closes right away.
If and when you have the time, if you could point me in the right direction on what I need to do to install this it would be very appreciated.
Thanks again!
[email protected]
Have you read Post 1
***YOU NEED TO BE INTEROP-UNLOCKED AND HAVE ALL CAPABILITIES UNLOCKED AS WELL!
titi66200 said:
Have you read Post 1
***YOU NEED TO BE INTEROP-UNLOCKED AND HAVE ALL CAPABILITIES UNLOCKED AS WELL!
Click to expand...
Click to collapse
Thanks for the reply. Yes I have read that, as well as all nine pages of the thread before I posted... I am trying whats in this thread right now....Let me reiterate that I am not a developer.
http://forum.xda-developers.com/win.../jailbreak-interop-unlock-windows-10-t3178140
To deploy any xap I need something like wppt, correct? Right now I am trying to install wppt but get any error saying...http://tinypic.com/r/51vfkk/9[/IMG]
So to summarize, I need to install wppt so I can deploy root_tool.xap, but getting errors in the process. Do I need visual studio installed on computer to run wppt? I am not a developer. Just a windows phone noob who doesn't want ads. I am fairly proficient in the desktop environment, not at all with mobile.
Thanks for all your help, it is not taken for granted. Much appreciated. Cheers.