Related
Any ideas on how to improve 3D performance on the G1? I am talking about changing things in the kernel/firmware to make 3D games run a little smoother. My favorite game on android is raging thunder 2, and it runs fine for the most part until more then one car gets on the screen. At that point it starts to lag alot. I know it was designed for faster hardware but with some mods we can make it better.
My setup:
CM based 2.6.34 kernel with BFS
Cyanogen 5.0.8 test4
No sound
All tasks killed before the game starts.
Overclocked at 691 min/max (Universal overclock, and always plugged in)
Any ideas?
One, stop killing tasks.
I'm curious if there's a way to assign more RAM to 3d. Hence a... reverse RAM hack?
r3s-rt said:
One, stop killing tasks.
I'm curious if there's a way to assign more RAM to 3d. Hence a... reverse RAM hack?
Click to expand...
Click to collapse
I use the running services section under settings to kill tasks. I haven't used a separate app taskiller since my donut days. Now the reverse RAM hack seems like a good idea, but wouldn't general phone performance suffer because of that?
Ah. Smart man on the killing tasks then.
Hmm... Probably? I usually go with about 18 free... never under 10... But that's ME. Maybe giving it 5mb more? That's a ~50% increase of the original 10.7MB reserved for it. The question here is how? I'm sure it can't be too hard.
the funny thing is dude, you dont mean to boost ur GPU as everything is integrated. when it comes to lag u'd usually resort to OCing the processor. i normally stick to RT1. RT2's requirements are 700Mhz and I dont know if i wanna put ma poor G1 through that - i have a hard enough time trying to get speedforge to work propperly
Vylle said:
the funny thing is dude, you dont mean to boost ur GPU as everything is integrated. when it comes to lag u'd usually resort to OCing the processor. i normally stick to RT1. RT2's requirements are 700Mhz and I dont know if i wanna put ma poor G1 through that - i have a hard enough time trying to get speedforge to work propperly
Click to expand...
Click to collapse
How could I have forgotten about overclock?!?! I'm one of the lucky ones my phone will boot at up to 710 Mhz for a good 30 seconds and I'm perfectly stable at around 652 Mhz. RT1 runs a lot smoother but it has a lot worse graphics. RT2 actually runs fairly well most of the time with the sound off when clocked at 528 so I dunno.
Yeah so I played with overclock some and I'm getting amazing results. When playing 3D games I've got my cpu clocked at 710 max/min and I am getting absolutely no slowdowns. My neocore benchmark is at 30.2 fps now, way higher then stock cyanogen's 22.5 ish scores. I haven't played with overclock since the universal overclock first came out and now my phone seems to be a lot more stable at higher frequencies then it was before. It's gonna kill my battery, but I'll just play with the phone plugged in lol. Problem is solved, but I'm still open to any 3D improving suggestions.
EDIT:I still get a few random reboots, specially if the phone has been idle, but performance is amazing.
EDIT2: I'm gonna have to eat my words....710max/min might have been too aggressive. Sometimes it reboots completely, sometimes it just exits out of the game. Until I posted on here I was having amazing results but a slower clock is more reasonable...I'll go with 691 max/min=p
Hi,
I'm having my Nexus One for about two weeks now and I already started a thread about the choppy scrolling between homescreens but now I want to know if there are other people that find their Nexus One slow and if they were able to make it faster in any way.
When I bought this phone I thought android would 'fly' on it cause I already had a HTC Magic and that went reasonably fast. But everything I'm using on my Nexus One feels choppy and not fluent as I expected/want it to be. For example when you start the browser or any other program you get this zoom animation which is nice but it doesn't go fluent, it goes choppy like you would play a videogame with 5 FPS.
And as I already mentioned the same counts for the launcher, it's just not fluent and doesn't feel fast at all.
I've tested different rom's, froyo, etc. but nothing seems to make it right so now I'm wondering if there are people that have the same issue's? Is it normal that the Nexus One isn't super fast to use or is there something wrong with my phone and should I return it?
i think something is wrong. especially with froyo the phone is ultra-fast.
Try Linpack and some other benchmarks and post the results.
Or try osmonitor for example and see what the cpu speed does, perhaps it is stuck @ 245 mhz for some reason lol
Ok, my score in Linpack is 6844 (MFLOPS). Don't know if that's good or bad. In BencmarkPi my Nexus One calculates Pi in 2842 miliseconds. And in Neocore I get 26.4 FPS which seems pretty normal to me.
I don't think my problems are hardware related, it more feels like it's the software.
Ow and I ran OSmonitor now and there's something strange. It says Memory Total: 217.440K Free: 67.500K
Is this a known bug or should it say 512MB?
renegadEEE said:
Ok, my score in Linpack is 6844 (MFLOPS). Don't know if that's good or bad. In BencmarkPi my Nexus One calculates Pi in 2842 miliseconds. And in Neocore I get 26.4 FPS which seems pretty normal to me.
I don't think my problems are hardware related, it more feels like it's the software.
Ow and I ran OSmonitor now and there's something strange. It says Memory Total: 217.440K Free: 67.500K
Is this a known bug or should it say 512MB?
Click to expand...
Click to collapse
your using eclair without a highmem kernel, thats why it only shows that much RAM. What roms have you tried? Try cyanogens or even stock froyo and see how the speed improves. I think you may be feeling its slow because of the extra animations that werent present during 1.6 which is what the MT3G is on
flybyme said:
your using eclair without a highmem kernel, thats why it only shows that much RAM. What roms have you tried? Try cyanogens or even stock froyo and see how the speed improves. I think you may be feeling its slow because of the extra animations that werent present during 1.6 which is what the MT3G is on
Click to expand...
Click to collapse
But the kernel thing doesn't affect the speed? I believe stock Froyo is one of the best I've tried so far. I tried cyanogen too, 5.0.7 I believe, but the launcher was extremely slow on that one.
Or am I flashing my roms the wrong way so things don't run smooth? I just download the .zip files, put them on my sd card, boot into recovery, whipe and flash. Normally it should work that way I believe.
And on my HTC Magic I was using a rom with Sense UI that worked very smooth. Maybe I should try the Desire ports but I like the stock Nexus One UI better.
Also I can't understand why there are developers OC'en the Nexus One? If it's really that fast already why would you risk that you're phone dies quicker for that extra performance?
And I don't hate animations, I even like them, but not if they are choppy.
renegadEEE said:
But the kernel thing doesn't affect the speed? I believe stock Froyo is one of the best I've tried so far. I tried cyanogen too, 5.0.7 I believe, but the launcher was extremely slow on that one.
Or am I flashing my roms the wrong way so things don't run smooth? I just download the .zip files, put them on my sd card, boot into recovery, whipe and flash. Normally it should work that way I believe.
And on my HTC Magic I was using a rom with Sense UI that worked very smooth. Maybe I should try the Desire ports but I like the stock Nexus One UI better.
Also I can't understand why there are developers OC'en the Nexus One? If it's really that fast already why would you risk that you're phone dies quicker for that extra performance?
And I don't hate animations, I even like them, but not if they are choppy.
Click to expand...
Click to collapse
the kernel is actually the primary factor when it comes to speed. how the kernel manages actions on the phone is the deciding factor on what makes it run fast. you can have a very fast phone hardwarewise, but if the kernel is designed poorly, the phone will run slow as well. Using a kernel that does not have highmem enabled means your probably running an older kernel that does not have updates for speed. the latest froyo kernel has highmem and JIT enabled for faster application use as well as over smoother feel.
i love the animations as well
im coming from the G1 and i havent had any of the of the problems you seem to be having. you are flashing the roms correctly (unless there are additional things such as google apps you need, idk whats the procedure on that for the nexus) Im running fully stock with froyo FRF72.
I would imagine that Desire would be SLOWER than stock android not faster. However the animations may be better optimized. I only used sense on the G1 and it was slow as heck on there (i would have used it all the time otherwise) The main reason that things look so choppy is because rendering is not handled by the GPU, rather the CPU. This puts more strain on the CPU than should be necessary.
I don't get why they OC the CPU either. Seriously, 1gHz is fast for a PHONE. I can understand why when the phone starts getting dated why you would....but its not gonna be dated till at least Q4 2010 when the 1.2-2gHz snapdragons are coming out.
Qualcomm will have a 1.5gHz ready for new phones this year. DUAL-CORE
http://gizmodo.com/5443976/qualcomm...dragon-smartphones-are-about-to-go-hyperspeed
As for the problem. Sounds weird. Try LauncherPro for a test. That is smooth launcher that flows like butter. If that is choppy then there is something seriously fu-bar going on with yer phone
I've flashed the stock froyo FRF50 now and till now it looks a lot better. OS manager now shows a total of 400MB memory. Is this the normal amount it should show? Or should I be looking for another kernel for froyo? And what is the difference between froyo FRF50 and FRF72?
-------------------------------------
Sent via the XDA Tapatalk App
so is your nexus smooth and fluid now? because mine is very smooth swiping the homescreens. using launcher pro. no choppiness at all.
Stock launchers to me are kinda choppy too. And that was my only complain with the nexus. Like the previous posters advised, try launcher pro and adwlauncher, tweak the settings to your liking and you'll see the difference. As far as kernel for froyo try pershoots kernel, it seems to be very smooth and speedy.
renegadEEE said:
I've flashed the stock froyo FRF50 now and till now it looks a lot better. OS manager now shows a total of 400MB memory. Is this the normal amount it should show? Or should I be looking for another kernel for froyo? And what is the difference between froyo FRF50 and FRF72?
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
Ok, thanks for al the replies and great advice! With the fresh Froyo rom and a better kernel everything goes way better now!
-------------------------------------
Sent via the XDA Tapatalk App
renegadEEE said:
Ok, thanks for al the replies and great advice! With the fresh Froyo rom and a better kernel everything goes way better now!
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
400 is normal. FRF72 seems to help battery life greatly for me. browser seems more stable and google apps have been updated (alarm and calendar)
renegadEEE said:
Ok, thanks for al the replies and great advice! With the fresh Froyo rom and a better kernel everything goes way better now!
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
Minor suggestion - install ADW.Launcher (you'll have to tweak the settings a bit to make it nice) or Launcher Pro (works great as is) with your Froyo ROM. You'll thank me for it. The stock launcher scrolling is choppy - always has been, never was really fixed in Froyo (at least as of FRF50 - I haven't even bothered trying it with FRF72).
I am getting annoyed with the speed of my Sprint Hero. the lag on the dialer is really annoying me, I hit dial and wait 5-10 seconds before the phone actually dials then it does the stupid vibrate after the call is ringing already.
Sometimes I think i did not hit the call button so i hit it again, and nothing happens for a while then suddenly I get 2 calls going at the same time to the same person.
I am rooted and running a 2.1ROM but I forgot which one, but it doesnt have any special features besides the super user app and htc sense.
Im willing to settle for something with out sense as long as it speeds up the phone.
I am even considering if its possible to unroot and to whatever 2.1 version sprint has out now and hope it fixes things.
Please let me know which ROM I should try, I dont care about sense, live wallpapers, special animations, just make the phone quicker.
cyanogen 2.2 mod is the best...overclock it to 768
Well, I assure you that using stock 2.1 will *not* fix your problems, especially lag issues. Better to stick to modded ROMs, to be honest.
After trying a few ROMs, I came to love ZenEXP. And with the 0.9.7 release that just came out, it seems like things have gotten even faster. You're rooted, so... do a nand backup, and give it a shot. Try Cyanogen too, as the last person said.
andrewt328 said:
cyanogen 2.2 mod is the best...overclock it to 768
Click to expand...
Click to collapse
Which overclock app you using?
Bkz_flyest said:
Which overclock app you using?
Click to expand...
Click to collapse
Please note that not every Hero will tolerate 768 on the processor. Really, seems only a select few can run it without stability issues. Mine will freeze instantly if set any higher than 710. This is why the new CM6 is clocked at 691, so everyone can boot it, and so it is rock solid. If you can get 768, then you are one of the lucky ones!
andrewt328 said:
cyanogen 2.2 mod is the best...overclock it to 768
Click to expand...
Click to collapse
How do you get it to 768? I'm using setCPU and it peaks at 528
My max is 678.. but I put it at 652. Should I just max it out at 678?
Never mind its 691.. I maxed it.. I wont have a problem with battery overheating right?
AjaxBU said:
How do you get it to 768? I'm using setCPU and it peaks at 528
Click to expand...
Click to collapse
The app that you use to manage your OC speed doesn't determine how fast your processor will actually run, it's all based on the kernel embedded (or flashed) onto your phone. If you're running stock 2.1 then SetCPU will only show your max speed as 528mhz because that's how fast the stock kernel is. Other ROMs like DarchDroid and CM6 have kernels that boost the max speed to over 700mhz. If you install one of those then you'll see massive speed improvements to your phone and with SetCPU you can either leave the kernel to allow for maximum speed or you can throttle it down if your phone becomes unstable and can't handle it.
jordanjackthomas said:
The app that you use to manage your OC speed doesn't determine how fast your processor will actually run, it's all based on the kernel embedded (or flashed) onto your phone. If you're running stock 2.1 then SetCPU will only show your max speed as 528mhz because that's how fast the stock kernel is. Other ROMs like DarchDroid and CM6 have kernels that boost the max speed to over 700mhz. If you install one of those then you'll see massive speed improvements to your phone and with SetCPU you can either leave the kernel to allow for maximum speed or you can throttle it down if your phone becomes unstable and can't handle it.
Click to expand...
Click to collapse
Wow, thanks for the tip. I'm running the stock 2.1 atm because I haven't found a rom that combines both live wallpapers and multitouch yet. I play games on my phone often, probably too often, and I have to be able to use two fingers. The live wallpaper thing is just because I think it looks really cool, especially that mario one.
benchmarking
what are good scores
I'm getting 5.4 Linpack, 464 quadrant! Oc'ed to 768.0MHz
Sent from my HERO200 using XDA App
ZenEXP 10(chars)
If you're looking for pure speed I recommend pancake 0.1,very fast 1.6 rom, if you're looking for something sorta fast and up to date, use cm6
tomatosoup said:
If you're looking for pure speed I recommend pancake 0.1,very fast 1.6 rom, if you're looking for something sorta fast and up to date, use cm6
Click to expand...
Click to collapse
CM6 is the best... fast and packed with features, and it's froyo! Use CM6 with the uncapped kernel
Can anyone show me where to find this CM6? Newbie...sorry
dvargas72 said:
Can anyone show me where to find this CM6? Newbie...sorry
Click to expand...
Click to collapse
Back out to the hero forum -> android development -> cm6 testing or cm6 rc1
Sent from my HTC Hero using the XDA App
Which Cm6 is better? Are there any differences?
All of the cm6's are fast, just have to figure the right configuration for your own phone!
Sent from my HERO200 using XDA App
I increased the vm heap on cm6 to 32m and it eliminated any and all lag for me. It runs like a scalded dog.
Sent from my CDMA Hero. I got some hot froyo on hero action here!
Cyanogen 8? Is this next? Or is this in the works? Also is 2.3.5 next and would it be numbered a different version when Ice Cream comes out? Also is anything coming from the devs to overclock to 800 yet?
cell2011 said:
Also is anything coming from the devs to overclock to 800 yet?
Click to expand...
Click to collapse
It's been done. So very very few phones are even stable at 800, and those that could generally performed worse in benches at 800 than at lower clocks. Many of these devices bootloop above 700.
Cyanogen 8 will not come out yet since will most likely be ice cream sandwich. I am not even sure is 2.3.5 will even come out and no the devs can not overclock this device to 800mhz because is 768 is the limit of the processor. Most people's phones do not even run that smoothly at 768 anyways. If somehow the dev found a way to overclock it to 800 (impossible btw but this is just a what if kind of statement) since the processor can not handle 800 it would just overheat the thing and cause crashes.
Also, on a side note, this should not be in the Development section. This should be in general or Q&A
This belongs in Q&A for future reference.
CM8 will be next, obviously. It will be based on Ice Cream Sandwich, so no, it won't be in development until ICS is released to AOSP so that the CM team can start using that code. 2.3.5 is an update coming out soon for the Nexus S 4G that fixes wifi and network speed, as well as adding more secure NFC for Google Wallet. It won't really affect us when it is merged into CM7. ICS is expected to be Android 4.0, but it could be 3.5 if Google decides.
There is a kernel that goes over 800Mhz, but anything over 768Mhz can be unstable on some phones. I tried it and there were no real performance gains, but battery life was a lot worse. Performance was actually worse at the highest CPU clock, in my experience. Just stick with 768Mhz. It's stable and chances are that you can get even better performance at a lower clock. I get better battery and performance at 633Mhz. It all depends on each unique phone.
rizdog23 said:
Cyanogen 8 will not come out yet since will most likely be ice cream sandwich. I am not even sure is 2.3.5 will even come out and no the devs can not overclock this device to 800mhz because is 768 is the limit of the processor. Most people's phones do not even run that smoothly at 768 anyways. If somehow the dev found a way to overclock it to 800 (impossible btw but this is just a what if kind of statement) since the processor can not handle 800 it would just overheat the thing and cause crashes.
Click to expand...
Click to collapse
I lol'd at this statement. Did you not read any of the posts above you?
When i began to post there were no posts yet. They must have got posted while i was typing. So seeing as the only post at the time was the op, then yes i did read the post(s) above mine.....
There is a kernel that goes over 800Mhz, but anything over 768Mhz can be unstable on some phones. I tried it and there were no real performance gains, but battery life was a lot worse. Performance was actually worse at the highest CPU clock, in my experience. Just stick with 768Mhz. It's stable and chances are that you can get even better performance at a lower clock. I get better battery and performance at 633Mhz. It all depends on each unique phone.
Click to expand...
Click to collapse
I can confirm that the Godmode kernel was able to push some phones, such as mine, past 800Mhz. Although I had a faster processor speed, my battery would drain incredibly fast as well as overheat. Even though I never hit a bootloop with the kernel, the battery life, overheating, and loss of performance kept me away. Sacrificing too much for having a faster processor speed. Normally I overclock to about 729Mhz and have great battery life, speed and performance in conjunction with a min of 19Mhz and a smartass governor.
Sent from my Hero that never dies! ;D
dastin1015 said:
I can confirm that the Godmode kernel was able to push some phones, such as mine, past 800Mhz. Although I had a faster processor speed, my battery would drain incredibly fast as well as overheat. Even though I never hit a bootloop with the kernel, the battery life, overheating, and loss of performance kept me away. Sacrificing too much for having a faster processor speed. Normally I overclock to about 729Mhz and have great battery life, speed and performance in conjunction with a min of 19Mhz and a smartass governor.
Sent from my Hero that never dies! ;D
Click to expand...
Click to collapse
Thanks. I am glad someone at least confirmed it. I never knew about the godmode kernel as ive only been here for a little bit. Sorry for misinformed post about their not being an 800mhz kernel. As I can see, i was wrong, but also I was correct in saying that the processor can not handle it....sometimes
rizdog23 said:
Thanks. I am glad someone at least confirmed it. I never knew about the godmode kernel as ive only been here for a little bit. Sorry for misinformed post about their not being an 800mhz kernel. As I can see, i was wrong, but also I was correct in saying that the processor can not handle it....sometimes
Click to expand...
Click to collapse
Yup, I'm at 806 - 19 ondemand while posting this and I can already feel it slowing down a little. 729 - 19 on demand is my best setup. I've tested a lot with trying higher setups than that but so far 729 seems to be the best for battery life and performance on every rom I've ever tried
Sent from my HERO200 using XDA Premium App
rubyknight said:
Yup, I'm at 806 - 19 ondemand while posting this and I can already feel it slowing down a little. 729 - 19 on demand is my best setup. I've tested a lot with trying higher setups than that but so far 729 seems to be the best for battery life and performance on every rom I've ever tried
Sent from my HERO200 using XDA Premium App
Click to expand...
Click to collapse
For some reason my phone never works well with higher clock speeds no matter what rom or kernel i use. I get my best results at 710-352 performance.
In before bierce gives birth over ANOTHER question being in the dev section
Sent from my Android using Tapatalk
rizdog23 said:
For some reason my phone never works well with higher clock speeds no matter what rom or kernel i use. I get my best results at 710-352 performance.
Click to expand...
Click to collapse
Correct me if I'm wrong, but from what I've noticed is that newer Hero's that were sold with Eclair as opposed to the original Donut, when I bought mine, are not able to reach those higher processor speeds past 691Mhz.
Sent from my Hero that never dies! ;D
i bought mine at radio shack back in september and it was still on 1.5 and ive never been able to get over 768mhz without it freezing and bootlooping its different with every hero.
i stay at 352-691 ondemand and thats plenty fast for me
Mine was running 1.5 also and it will run fine at 768 but battery life suffers so I usually run at 352/710 and battery and performance are good (depends on rom kernel)
Where can I get the godmode kernel ....
Sent from my HERO200 using XDA App
I actually got mine two weeks after it came out.....so i mean it could just be that this phone is dead now. I never had a refurb or anything. I got it wet once but it got repaired. I've only had this one the whole time. Do you think that is the issue?
rubyknight said:
Yup, I'm at 806 - 19 ondemand while posting this and I can already feel it slowing down a little. 729 - 19 on demand is my best setup. I've tested a lot with trying higher setups than that but so far 729 seems to be the best for battery life and performance on every rom I've ever tried
Sent from my HERO200 using XDA Premium App
Click to expand...
Click to collapse
Hey rubyknight,
just wondering why 19? Ive seen people do that but can the processor really ever do anything at 19? if so, doesnt it affect stuff like wake. Im trying it now just to see for myself. Ive been playing with a really high min value between 480 and 576 with the high at 748 and it actually doesnt only seems to affect battery life a little, both on the .29 and .35 kernels on jaybobs roms and on OMFGB.
Thanks
chalan30 said:
Hey rubyknight,
just wondering why 19? Ive seen people do that but can the processor really ever do anything at 19? if so, doesnt it affect stuff like wake. Im trying it now just to see for myself. Ive been playing with a really high min value between 480 and 576 with the high at 748 and it actually doesnt only seems to affect battery life a little, both on the .29 and .35 kernels on jaybobs roms and on OMFGB.
Thanks
Click to expand...
Click to collapse
It depends on the cpu governor that you use.
nandroids are for
sissies
ch1naski said:
It depends on the cpu governor that you use.
nandroids are for
sissies
Click to expand...
Click to collapse
so update, ive run it at 19/768 on demand all day and after 11hrs 13 min its at 60% thats not bad for my phone! and there was almost no performance difference. Just the slightest UI lag... this is on jaybobs 7/8 with the .29 kernel, with background data off. And my regular usage which is not a lot. but for me its good. i wish I had tried it ages ago.
chalan30 said:
so update, ive run it at 19/768 on demand all day and after 11hrs 13 min its at 60% thats not bad for my phone! and there was almost no performance difference. Just the slightest UI lag... this is on jaybobs 7/8 with the .29 kernel, with background data off. And my regular usage which is not a lot. but for me its good. i wish I had tried it ages ago.
Click to expand...
Click to collapse
I believe that you can set the ramp up frequency and that may help with the lag. Setcpu, advanced settings, I think?
nandroids are for
sissies
Hey guys
I know their probably another thread out there with this in it but... Yeah. But go ahead troll me lol, im still a bit of a noob.:silly:
Anyways, i have a Galaxy Ace s5830. I have Beats with smooth sense ROM. I had it upto 883MHz Yesterday but after i turned it off then back on ROM Toolbox reverted it to 806MHZ. 883MHz seemed a lot faster even though some people get theirs close to 1GHZ
My phone afterwards rebooting had issues such as the phone becoming un-responsive when i was even doing nothing (maybe the overclock to 883MHz had some short term effect?) But the phone seemed fine after safely turning it off then back on several times. Still works perfectly i got scared when it started to become un-responsive. But it works well now i have also used pimp my ROM, and the scripts work like a charm. Especially the call quality one (it uses bravia engine or something?). But with pimp my ROM wi-fi and network tweaks it completely broke wi-fi saying wi-fi connecting... Then saying under the network name 'Error'. Dam it took so long to get the IP address then said error like i said lol
At the frequency 883MHZ the phone seemed stable and faster than ever before, i did change it in small increments
So just wondering, what is the safe and most reliable frequencies to set it at? I currently use 225Min and 806 Max. With the userspace governer.
I know the terms of ' Safe ' and overclock don't mix (sorta like water and my dads S2 :crying: ).
Im also considering buying a 2450MAH battery from ebay for about 5.99 AUD. Any suggestions on should it be okay and better? But i mainly would like to knwo about the overclcoking lol.
So yeah, basically what is a good frequency to set it at? Is 883MHZ okay? Am i going to fry it out or completely brick or damage the phone or cpu if i set it at 883MHZ? Would love to buy a new phone but i need to save im only 14
So yeah please help me and you could help others too. Please be welcomed to troll me
I plan on having this phone another 3-4 Months before i consider buying the S2 or Galaxy note when their cheap (like really cheap)...
Like i said please help, and feel welcomed to troll me when you do help :highfive:
Man i feel like a Rebel when i overclock
That battery is a fake and has been confirmed as such. If you want a higher cap. battery get a 1500mAh or 1600mAh. I don't like messing with the clocking, good luck to you.
Thanks
Narwhal73 said:
That battery is a fake and has been confirmed as such. If you want a higher cap. battery get a 1500mAh or 1600mAh. I don't like messing with the clocking, good luck to you.
Click to expand...
Click to collapse
Thank you for informing me that the battery is a fake ... But the seller has like 96%/100% seller rate or something?
Thanks for all your help, i hited like
Sorry for my 'Noobiness'.
What battery do you reccomend? or should i consider getting a AA battery to USB power charger?
i'm pretty comfortable with 825 or 844 mhz
It's pretty good with 614 MHz lol
Sent from my GT-S5830 using Tapatalk 2
Running smooth even on 614 Mhz.
Moderate usage.
King Android said:
Thank you for informing me that the battery is a fake ... But the seller has like 96%/100% seller rate or something?
Thanks for all your help, i hited like
Sorry for my 'Noobiness'.
What battery do you reccomend? or should i consider getting a AA battery to USB power charger?
Click to expand...
Click to collapse
Right now I am just using the stock one. I personally wouldn't change my battery to anything other than stock, but people have reported that 1500mAh or 1600mAh work well. I wouldn't use anything that has a higher capacity than that though. Also, if it's very inexpensive it's probably not real.
Clocking actually goes on the rom. I've seen people having OC over 1gHz & still stable with the mad kernel but I gave up clocking as I didn't see much of a difference & also underclocking started giving me FCs on some heavy apps while it was all fair in the unclocked state. And again, there's no such thing as a best frequency. You find your own values. What works well for him might mess up your phone rebooting all by itself. Stock batteries are always fine & they also keep you under warranty. Anyone ever wondered why the phone manufacturers didn't implement clocking as a part of it ? Stability is the word. I've seen here, I've seen there. East or west, stock is the best ! Try keeping as close to stock as possible, just to have that extra touch of safety & stability
Sent from my GT-S5830 using xda premium
Hello all.
I was reading this thread and became interested in overclocking. In my case my device is:
Samsung Galaxy Ace GT-S5830L (labeled as GT-S5830 by CyanogenMod)
CyanogenMod-7.2.0-cooper stable (Android version 2.3.7)
Kernel 2.6.35.7-perf-CL882825 ([email protected] #21)
I was checking in CM settings -> Performance -> CPU settings that I could adjust min and max clockspeed, but in max frequency the maximum one is the same processor's speed, 800 MHz. So my kernel doesn't support overclocking.
After a search in the forums I found there are plenty of custom kernels for this legacy device. But I'm relatively new to the kernel world, so I wanted to ask you for advise. What custom kernel could I try for my device for overclocking? Or King Android, what custom kernel are you using?
It'd the first time I do the overclocking stuff, I'd like to try it to see if some higher quality mp4 videos (which are run by MX Player only in software acceleration) can run better, as well as some games and emulators.
I'm also kind of a noob as you can see. If you want to troll/scold me...
Thank you all.
ctcx said:
Hello all.
I was reading this thread and [...]
Click to expand...
Click to collapse
Hi you can try FireKernel or BlackHawk kernel. Use the search function to find them easily. Both supports Overclocking and are made for CM7. [MAKE SURE THEY SUPPORT YOUR S5830L]
At the moment I'm with Democracy ROM which is based on unofficial CM7 and I don't really feel the need of overclocking. It is all smooth with firekernel at
Min 245
Max 806
Governor smartassv2
Sent from my... oh wait, who cares?
I did my search.
Maybe I forgot to mention I haven't installed a custom kernel before... Does the kernel come as a file itself, or along a CM7 custom rom? And if it comes as a file itself, how can I install it? I already mentioned what CM7 I have installed. It's the "official" stable one.
Would OCing help to improve videos and games performance? i.e, faster, no lag...
You can set it to whatever your phone can handle. Mine can't go past 844Mhz otherwise apps start force closing and such. If your phone is completely stable at 883Mhz then you're good.
As for the battery, no. It's a fake. Buy a 1500mAh like I did. Works like a charm and it brought 3. Lasts a little longer and it's really amazing. Had it for a while now. Still have one in the pack, only been using 2 when I don't get to charge my phone. Really handy.
---------- Post added at 03:07 AM ---------- Previous post was at 03:03 AM ----------
ctcx said:
I did my search.
Maybe I forgot to mention I haven't installed a custom kernel before... Does the kernel come as a file itself, or along a CM7 custom rom? And if it comes as a file itself, how can I install it? I already mentioned what CM7 I have installed. It's the "official" stable one.
Would OCing help to improve videos and games performance? i.e, faster, no lag...
Click to expand...
Click to collapse
OCing helps the phone over all. But remember, without much free ram, OC won't really change much. You need a balance of ram and CPU. Like me, I use swap and OC to 844Mhz. Even if it's a low OC, it's still better than nothing.
1. @SuperAce609: I have 104 Mb free RAM out of 278 Mb total RAM. Mine is Galaxy Ace S5830L with CM 7.2. Would OC work for me? Up to what frequency?
And how can you have 600 Mb of RAM? Is your device really an Ace?
2. There's still a doubt I haven't been able to find out myself: does the kernel come as a file itself, or along a CM7 custom rom? And if it comes as a file itself, how can I install it? I was suggested FireKernel or BlackHawk ones...
Any help?
ctcx said:
1. @SuperAce609: I have 104 Mb free RAM out of 278 Mb total RAM. Mine is Galaxy Ace S5830L...
And how can you have 600 Mb of RAM...
2. There's still a doubt I haven't been able to find out myself: does the kernel come as a file itself, or along a CM7 custom rom? And if it comes as a file itself, how can I install it? I was suggested FireKernel or BlackHawk ones...
Click to expand...
Click to collapse
1.- Every Ace is diferent..some Ace's can go up to 960 Mhz while other just 844 Mhz, the thing is: try it yourself overclocking in small jumps. Swap is a small amount of memory of your SD card, that Android use it like if where RAM, but decreases SD card life...
2.- Some Kernel came Built in on Some particullary ROM's but generally cames on a CWM Flashable zip; FireKernel & BlackHawk are specially for CM7; In my opinion FireKernel is the best... And there are others like Battery Extender Kernel or NimsKernel but these Kernel are only for Stock ROM's...
I hope you find useful my info...
Thank you, Blake2893.
Then there's just 2 doubts left, if you don't mind.
There's a fair number of custom CM7.2 roms with FireKernel in the developer forum. Is there one you or someone else could say is the best in terms of stability and least number of bugs? Or is that something I should test myself in the S5830L?
The Ace S5830/S5830L has 278 Mb total RAM by default. If I understand well, you're implying I could modify SWAP partition in order to increase RAM and, probably if lucky, with this make OC work better. How can I do that? Do I also need a custom kernel/rom for that?
The best stable Roms so far are the stock GingerBread based ones... but if you aks me about CM7 there a few like Apocalypse rom(ICS styled ROM) with the FireKernel that suports swap I think...
and for Swap you only need a Kernel with Swap enabled and a SWAP Partition on your Sd card...
lets see im fine and stable with 979 mhz without reboot for 9 hours
overclock is depend on your hardware
best over clock freq.
King Android said:
Hey guys
I know their probably another thread out there with this in it but... Yeah. But go ahead troll me lol, im still a bit of a noob.:silly:
Anyways, i have a Galaxy Ace s5830. I have Beats with smooth sense ROM. I had it upto 883MHz Yesterday but after i turned it off then back on ROM Toolbox reverted it to 806MHZ. 883MHz seemed a lot faster even though some people get theirs close to 1GHZ
My phone afterwards rebooting had issues such as the phone becoming un-responsive when i was even doing nothing (maybe the overclock to 883MHz had some short term effect?) But the phone seemed fine after safely turning it off then back on several times. Still works perfectly i got scared when it started to become un-responsive. But it works well now i have also used pimp my ROM, and the scripts work like a charm. Especially the call quality one (it uses bravia engine or something?). But with pimp my ROM wi-fi and network tweaks it completely broke wi-fi saying wi-fi connecting... Then saying under the network name 'Error'. Dam it took so long to get the IP address then said error like i said lol
At the frequency 883MHZ the phone seemed stable and faster than ever before, i did change it in small increments
So just wondering, what is the safe and most reliable frequencies to set it at? I currently use 225Min and 806 Max. With the userspace governer.
I know the terms of ' Safe ' and overclock don't mix (sorta like water and my dads S2 :crying: ).
Im also considering buying a 2450MAH battery from ebay for about 5.99 AUD. Any suggestions on should it be okay and better? But i mainly would like to knwo about the overclcoking lol.
So yeah, basically what is a good frequency to set it at? Is 883MHZ okay? Am i going to fry it out or completely brick or damage the phone or cpu if i set it at 883MHZ? Would love to buy a new phone but i need to save im only 14
So yeah please help me and you could help others too. Please be welcomed to troll me
I plan on having this phone another 3-4 Months before i consider buying the S2 or Galaxy note when their cheap (like really cheap)...
Like i said please help, and feel welcomed to troll me when you do help :highfive:
Man i feel like a Rebel when i overclock
Click to expand...
Click to collapse
The best and most stable overclock freq. is actually 906mhz-864mhz. It works like a charm mate! Try it.
Cyb3rVect0r said:
The best and most stable overclock freq. is actually 906mhz-864mhz. It works like a charm mate! Try it.
Click to expand...
Click to collapse
Using CPU high frequencies is not recommended, your device's life will be reduced considerably