HELP
I just tried to jailbreak my G1 and when I try to update it fails. Now I cant do anything at this position. I've tried taking out the battery and retry the update but it still fails. I'm stuck at the rainbow screen with serial0 in the middle of the screen
Related
I am having a problem that I hope someone can help me with.
I have an SX-66 with WM5 on it. The other day the device suddenly stopped booting. I can get the device to turn on, soft-reset, hard reset and get into bootloader mode, but whenever I try to boot the operating system it gets stuck on the colored stripe boot screen and just sits there showing the version numbers and nothing else. I have followed the instructions on the Wiki for downgrading but I still have the same problem. I have tried draining the battery fully and recharging but still no dice. I am even able to reflash the device with my laptop and it says it succeeds with the up/downgrade but then it just gets stuck again. If I try to install a 1.40 the device says that the flash is successful but then WM5 tries to boot again and I am stuck at the striped screen.
Can someone please help me out? Do I have a brick?
I had a bad rom upgrade and my ALPINE's stuck on splash screen.I could manage to take it in bootloader mode several times but when I tried to make a connection pc via usb cable it always has gone out from bootloader mode. I tried several times but the result was same.After a few days I couldnt take it in booTloader mode it just shows me a black screen.
I will be very happy if someone help me....
I need some help,
I've installed HardSPL v3.56 and installed KaiserDiamond_V9 the install got to 16% and then reported error 262, I run the recovery no luck same error reported, I'm now stuck with mufti coloured bars when I switch on. Any ideas
Hello
the phone is stucked in "SPL"mode. try to flash with an original ROM
scudo94, I tried that a couple of times, still the same.
I removed the battery etc before each attempt.
Check THIS thread on how to recover from a bad flash...
Thanks for the info, I'll give it go later and let you know how I get on
so one day i tried to update to a 2.2 rom and my fone froze. it got stuck at the 2nd splash screen. turnd it off wiped and re flashed, same thing happened. so i dropped back to rc29 and now i cant even flash 1.5 or 1.6. they also get stuck at the 2nd splash screen. please help me to get back on 2.2.
hiroots said:
so one day i tried to update to a 2.2 rom and my fone froze. it got stuck at the 2nd splash screen. turnd it off wiped and re flashed, same thing happened. so i dropped back to rc29 and now i cant even flash 1.5 or 1.6. they also get stuck at the 2nd splash screen. please help me to get back on 2.2.
Click to expand...
Click to collapse
How did you flash the RC29? Did you use the OEM recovery by holding the camera and power button?
yes thats how i did it.
Hi, I have an htc touch diamond that will not boot past the splash. It turns on, says htc diamond without red letters. I have tried soft reset & hard reset, doesnt work. also phone does not turn on by power button but only the reset button. Every time I try to flash or unlock it says "Error 262", I've tried soft reset and continuing the setup and the error comes up again. I've tried the whole thing of changing the driver from 2007 to 2003 and completed it and still has not fixed error 262. I've tried many different roms and the only ones that bypass 262 are the .exe file rom setups, but after installed still doesnt boot past splash screen. the farthest ive gotten with one .exe is going through the phone setup, but after the setup the phone turns off. the only way my computer notices the phone and the way i flash the phone is when it is in bootloader. have also tried the bootloader where you press the back button. I've been trying so hard to fix this phone but it just wont happen. please help?
ryan21x5 said:
Hi, I have an htc touch diamond that will not boot past the splash. It turns on, says htc diamond without red letters. I have tried soft reset & hard reset, doesnt work. also phone does not turn on by power button but only the reset button. Every time I try to flash or unlock it says "Error 262", I've tried soft reset and continuing the setup and the error comes up again. I've tried the whole thing of changing the driver from 2007 to 2003 and completed it and still has not fixed error 262. I've tried many different roms and the only ones that bypass 262 are the .exe file rom setups, but after installed still doesnt boot past splash screen. the farthest ive gotten with one .exe is going through the phone setup, but after the setup the phone turns off. the only way my computer notices the phone and the way i flash the phone is when it is in bootloader. have also tried the bootloader where you press the back button. I've been trying so hard to fix this phone but it just wont happen. please help?
Click to expand...
Click to collapse
If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.
for official rom you can find at http://www.shipped-roms.com/index.php?category=windows mobile&model=Diamond