hi I've got a qtek 9090. It has a "Test Only not for sale" on the screen when it boots up. I wanted to update the ROM on it and when I started this message came up "radio bootloader version error" it happend when the window with % result of update showed up on screen. Since then I my ppc display is grey with "Serial" and "v2.03" on it. I ahve tried this
http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_Bootloader_mode
but it didn't help.
If Any one got any idea how to fix it please contact me on my email address [email protected]om
Thanx
Hello,
I Have a spv m2000 and I have excatly the same problem... I Try some versions of rom but it doesn't work...
If your PPC is always in 'Serial' and 'v2.03', you have to reinstall a rom without the radio. To do that, you just need to remove the file radio.nbf in the rom files......and to reinstall the good rom without the radio..
But with this procedure, the radio isn't upgrade.It's just to restart your ppc.
I can't find how to upgrade the radio..
Your bluetooth works well ?? My bluetooth stop after sevral seconds I've launched it and say a problem with the licence.. ANd you?? That's why i would like to upgrade the radio but I can't succeed..
If you find a way to upgrade, please tell me...
Thanks
Rom
southparkfan76 said:
hi I've got a qtek 9090. It has a "Test Only not for sale" on the screen when it boots up. I wanted to update the ROM on it and when I started this message came up "radio bootloader version error" it happend when the window with % result of update showed up on screen. Since then I my ppc display is grey with "Serial" and "v2.03" on it. I ahve tried this
http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_Bootloader_mode
but it didn't help.
If Any one got any idea how to fix it please contact me on my email address [email protected]
Thanx
Click to expand...
Click to collapse
Hi
I had the same problem.
My PC was running vista, so i went to a pc running XP and the followed your link and it worked a treat.
Maybe that's your problem.
Hey everyone. I'm tearing my hair out trying to get this sorted but I just don't know what to do!
So, when I got my X1 as everyone on here should do, was flash my X1 with the HardSPL and some custom roms, this was a few months back. Then, shock! Horror! My case went and broke, (cracked near the volume button build W44) so I sent it back to SE for repair. I sent it back reset back to defaults but left the hardspl on there.
SE sent me a brand new phone (I think... This one says under the battery build w50, but the battery says w32..) I received it today. I thought it would be my old one repaired but SE had other ideas. Booted up and have Image Version: 1.03.931.10 and HardSPL 72.000 I think I said that correctly...
Now since sending it for repair and receiving it back, their seems to be quite a few wm6.5 roms floating about, and obviously I can't use the stock software as that wouldn't be right!
Now I have tried flashing the hardspl to the phone through my Vista PC and all it keeps giving me is connection errors. I thought maybe it was already flashed so I tried flashing just a rom, and that just made the phone get stuck on loading (flash by memory card). I thought it might be Vista, so I tried doing it on my other PC (XP) and I get the same issue. This bloody thing won't flash!
I have had "Connection Problems" - "Update Errors" with different numbers. The current one being Error [260] CONNECTION.
Now I have been searching around through the hardspl thread and other places trying to find out what I need to do or how I can fix it, but everything I try doesn't make a difference. I did read some other people with recently repaired phones having the same problem and perhaps SE have put a new spl thingy-ma-jiggy on there. (Please forgive the technical jargon, I have no idea what im on about.) I have also tried the ticking/unticking advanced network functionality, but that hasn't made a difference either.
So by the end of typing this, I have little hair left. Let's hope you can all help, before I have none left!
I would appreciate ANY help! Really.
Just wanted to add, I was at first getting the phone to a loading bar when flashing, but it would stay at 0% then flag up an error on the PC. Now after the tri-colour bars, the phone just sticks on Loading...
Well just to update. I have been trying to sort this since posting. I flashed the rom to an old UK generic one, as I read in another topic people had to do that before HardSPL. Done that, and tried flashing the hardspl. Same thing, just getting connection errors.
I tried going into bootloader and running the hardspl from there. It works and the phone gets to 10% and then gives an UPDATE ERROR. The phone is now bricked, and I have to reflash the original wm rom to get it back.
Though the Tricolour screen now shows 0.52.Olinex
Any ideas?
Shameless bump for help.
very stupid situation.
i have the same situation in puncto of flashing.
i get my phone three month ago.
after hardspl i .... sorry, no hardspl ... the phone says at 0% bla bla bla
i solve the problem by consulting one night absolutly stressing again and again and again .... google ... xda ... google
than 3 thinks at one time was the solution:
0. need activesync - connect !!!!
1. SDA_ApplicationUnlock.exe for desktop pc
2. enterbootloader.exe for pocketpc (please, the right version, it exist for eten too, but we need the xpediaversion ..)
3. changing registry-entries
how to:
activesync-connect, than copy "enterbootloader.exe" to pocketpc. it must be root, not sd-card. use a pocketpc-registry-program to change these values :
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001001 = 1
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001005 = 40
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001017 = 144
HKEY_LOCAL_MACHINE \Security\Policies\Policies\0000101b = 1
if not exist than add the key.
now, start desktop-program, follow instruction EXCEPT reboot.
start "enterbootloader.exe" on pocketpc. now, you can install hardspl and the device is flashable for ever.
thats works on me, hope it could help you too.
Thanks for the reply. Not had time to try it till this morning. Ok so, after spending about an hour trying to find the correct enterbootloader.exe I finally realized, that the hardspl package includes it. *Duh!* So that was time wasted.
I changes the registry values as you said with Resco registry editor, and follower the unlock then enterbootloader.exe Start HardSPL package. Starts to install. Gets to 10% then I get
ERROR [262] : UPDATE ERROR
The rom update utility has encountered communication errors during the update process.
So im open to suggestions if anyone has any. I just can't understand why it's not working. It's not a problem with my computer or cables. I flashed the phone before I sent it for repair and I have tried doing it on two computers one with XP 32bit and one with Vista 64bit.
hmm. would u like to install a custom rom, or a stock rom?
msg me, and i hope, i can halp u.
I want to have the hardspl on there so I can flash custom roms.
If it's a case of the software/firmware/hardspl whatever you call it, has been updated by SE. How would one go about getting it flashed? Would we have to wait for an update HardSPL to be released?
U read this thread?
My first hardspl was from this thread. New X1 will come tomorrow back from SE (vibration was defect +++ some more problems with case), and i will try it again with this thread.
hope, this will help u mate.
Yeah, I have been through that thread with a fine toothcombe trying everything suggested to see if I can make it work.
When you get yours back, if you have to do anything out of the ordinary to get it to flash or can't do it. Please come and let me know in this thread. If they have updated yours like mine, and yours won't flash, at least I won't be the only one!
k, i will msg u tomorrow around 2pm.
Cheers.
In the meantime. Does anyone have any other suggestions I could try?
Bump, for some help.
now i know, what is exatcly your problem.... <--- SAME Problem
i hope, i will find a solution and msg u then. if u´ll got a solution for this prob, msg me too plz.
Solution found in this Thread!
Download this and unzip it to your device. ++ run it. It will start your X1 in Bootloader menu and say "0.52.OliNex".
Then start hardspl while X1 is in Bootloadermenu....
FINISH =)
Thanks for the reply matey. Glad you got yours sorted. Just tried what you said and I get 0% then it switches to ERROR [262] : UPDATE ERROR.
vwrmic said:
Thanks for the reply matey. Glad you got yours sorted. Just tried what you said and I get 0% then it switches to ERROR [262] : UPDATE ERROR.
Click to expand...
Click to collapse
hmmm... it works fine on my new x1. are u sure, that u start the ssplmanual on your x1 and not on your computer?
Yea, im not sure what the problem was with it. Thankfully I have it done and dusted today! Because I flashed it earlier to an older official version, and you said you got it working. I presumed you had - had yours flashed to the newest version due to it being off for repair. So I reflashed the official update and fully updated it. Then tried hardspl which didn't work. Tried with the advanced USB thing off, tried again with how you said you did it above, and Viola!
Hip hip hoorah! Thanks for the help. Can finally use me bleedin phone now!
no problem mate hf with your x1
hello,
i see smilies and yea's ...
for me to understanding (for next time or other users):
1. complete official update (if exists)
2. flashing (hardspl) without "advanced usb"
thats all?
cool.
Hi,
I got a russian HTC Diamond and wanted to change the rom to english.
I tried to follow the Hard-spl,Radio,Rom procedure to change the Rom,but, I successfully completed the Hard-spl part but white upgrading the radio the phone got stuck and finally i got error 262 Which has something to do with CE.
After some search found that if i Hard spl it again it would be fine. but the issue is, when i try hardspl now , i get error 200 phone not detected.
I have tried numerous ROM and numerous times but the phone boots up in some Russian screen. i can detect the file system and sync using windows sync in vista.
Tried to boot from internal storage but says no ROM file found. Please help me to sort this issue out thanks a lot
Prats
HTC diamond restore
Is there no one who can sort out this query?
Diamond WinCE issues
PLs help me my problem what should I DO ?
Hi I have got a problem and i hope that you can help me
While flashing my X1 via USB there was an error message and flashing was interrupted.
I was doing the "recovery steps" that the programm gave me but it didn´t work.
When i started my x1 again there was the tri color screen.
(
RUUNBHKOVS110
SPL-0.72.OliNex
MircroP1-787
MircroP2-707
Upgrade ROM code error
Please try again_Nothing_
Serial)
I already used the board search and google but i cant fix it.
The Window Mobile Device Center isn´t connecting with my x1 and if i try to flash it again it stucks on 0% and after that there is again an error message.
Please help me
I dont know if it is important but i have got win7 x64
greetings
Try flashing with the sd-card method...
Apfeltorte said:
Hi I have got a problem and i hope that you can help me
While flashing my X1 via USB there was an error message and flashing was interrupted.
I was doing the "recovery steps" that the programm gave me but it didn´t work.
When i started my x1 again there was the tri color screen.
(
RUUNBHKOVS110
SPL-0.72.OliNex
MircroP1-787
MircroP2-707
Upgrade ROM code error
Please try again_Nothing_
Serial)
I already used the board search and google but i cant fix it.
The Window Mobile Device Center isn´t connecting with my x1 and if i try to flash it again it stucks on 0% and after that there is again an error message.
Please help me
I dont know if it is important but i have got win7 x64
greetings
Click to expand...
Click to collapse
As per what Lokatho mentioned,
in case you didn't know what it meant:
read that:
http://forum.xda-developers.com/showthread.php?t=445662
hope you could revive your X1.
Cheers!!
hmm ok i´ll try it :/
i hope that it works 'cus my X1 is new >_<
I'd suggest SD Method as well...
Additionally you could plug your X1 (while in three-color-screen, also known as Bootloader) inot your USB and start the RUU again.
Both should work.
@ wolf
I already tried it.
Everytimes the same error code something with connections problems don´t know why yesterday it worked :/
is this solved then?
Mod. edit: not dev related, moved to general
Hi everyone,
i've got a problem... i have tried to flash hardspl (bootloader) on my x1 but it doesnt work.
i have tried it like i read in the forum in different threads but i cant enter bootloader and when i start hardspl on my pc and take step by step as the program says... after the progression bar came - my phone display goes black and the front panel starts to shine and after a time i get a connection error on the hardspl program...
can anybody pls help me????
did you take out your micro sd card out of your phone?
That was my problem...........
I too have the same problem. I follow the instructions and HardSPL checks my x1. Then when I hit update (the rom). It gives me either error 202 or 246. Not sure why. Anyone?
EDIT: Problem persists with or without sdcard
hard spl
hi
i had some problems !
here is the best info
try every thing and search and read what i understud was that some phones have different ways to get in to the right hardspl mode i all most gave up and then it workt
DONT GIVE UP I WAS ON IT FOR 2 WEEKS
THE WORST THING IS I DONT REMEMBER WHAT I DID SORRY !
HASSE
tilsid said:
I too have the same problem. I follow the instructions and HardSPL checks my x1. Then when I hit update (the rom). It gives me either error 202 or 246. Not sure why. Anyone?
EDIT: Problem persists with or without sdcard
Click to expand...
Click to collapse
Several time ago i got that error too, but i never give up. Try another hardspl for xperia, when u click it, it will auto generate to extract some file, just click romupdate utility and follow the same procedure.
If still got some error, try install it from a fresh computer with usb 2.0 installe and active synch.
You just got that error becouse there is some miss connection with another usb device.
UPDATE: it worked
So I did a hard reset on the phone (settings-> clear storage) and then tried again. Worked like a charm. Installing ROM right now!
Thanks everyone!
Moved to X1 Q&A as not Rom Dev
it still not work...
i have tried all you write me...
no it says first "no file found" and trys to update over usb and than it says again connection error...
what shall i do?