Database Develop

SpbPocketPlus Shortcuts

Could someone who uses SpbPocketPlus, zip the shortcut command directory and attach it to a reply? I believe its under "\Windows\Start_Menu\Programs\Spb_Pocket_Plus_Actions".
I'm using Faria's 3.2 ROM and SpbPocketPlus freezes it so I have the executable directory loaded on the SD card and am hoping I can use the shortcut programs especially "backlight loop".
At the very least, could you tell me the shortcut properties setting for the "backlight loop" command? I figure its ActionSender.exe with some parameters.
Thanks,
Mike H

Find the attached file if u still want it, but as far as I have realised they are just the shortcuts for the main exe's already installed.
Any way good Luck
Sidd

sidd said:
Find the attached file if u still want it, but as far as I have realised they are just the shortcuts for the main exe's already installed.
Any way good Luck
Sidd
Click to expand...
Click to collapse
Thanks sidd, thats exactly what I wanted.
Mike H

Won't work with your ROM
holmanm said:
Could someone who uses SpbPocketPlus, zip the shortcut command directory and attach it to a reply? I believe its under "\Windows\Start_Menu\Programs\Spb_Pocket_Plus_Actions".
I'm using Faria's 3.2 ROM and SpbPocketPlus freezes it so I have the executable directory loaded on the SD card and am hoping I can use the shortcut programs especially "backlight loop".
At the very least, could you tell me the shortcut properties setting for the "backlight loop" command? I figure its ActionSender.exe with some parameters.
Thanks,
Mike H
Click to expand...
Click to collapse
SPB Pocket + will not run on that ROM. Been there, done that....you're lucky your device booted up completely to try and fix it. iLauncher3 works great, give it a try.

30.53 MB of storage - REMINDER

As people keep asking over and over... I'll remind you all the procedure of joining your ExtROM with a storage space, giving you as much storage, as 30.53 MB
First, you have to download ExtROM Unlocker, install it on your device' storage (not on SD card, nor on RAMDisk!). This will give you 4 shortcuts in Programs folder:
- unhide ExtROM
- hide ExtROM
- unlock ExtROM
- lock ExtROM
First, choose "Unhide ExtROM" and perform a soft reset. After that, choose "Unlock ExtROM". Perform a soft reset.
Now, get HimaDOCTool. Run it, and do a DOC (disk-on-chip) format.
Then, hard reset. Generally it should be enough, but you'll be safier if you will do it this way:
1. Hold Camera and Record button and press reset. Hold it a while, until you'll see three options at the top. Choose:
* Enable KITL: No
* Clean Registry Hive: Yes
* Format Storage: Yes
You can walk between them and change with Camera and Record buttons.
And press Action on your DPad.
Voila
Attention!:
Ather90 developed an UI (user interface) for above apps, which gives you a lot easier progress with this task. All the info about its usage is contained on the first page of this application.
​

Just what i was looking for ...
thx

sticky!
........

thanks very much buddy i really need this

I'd like to throw in that you'll get a 'trusted certificate error' unless you install the unlocker on the device - running off the storage card won't work.

aioue said:
I'd like to throw in that you'll get a 'trusted certificate error' unless you install the unlocker on the device - running off the storage card won't work.
Click to expand...
Click to collapse
Excellent remark! It sometimes takes a junior member to see what the regulars overlook.

Thanks for the how-to. Works a treat.

Thx! It worked 100%!
Really needed this one!
14Mb are not enough!

aioue said:
I'd like to throw in that you'll get a 'trusted certificate error' unless you install the unlocker on the device - running off the storage card won't work.
Click to expand...
Click to collapse
Thanks, I've edited the first post

Hi utak3r,
Can you explain how to unlock the ExtROM step by step?
Thanks.

1)download ExtROM Unlocker ->done
2)install it on your device (not on SD card!) ->done
3)and unhide your ExtROM.-> done
4)Then perform a soft reset. ->done
5)After that, unlock your ExtROM. ------> how to do this
6)Perform a soft reset.

tangwd898 said:
1)download ExtROM Unlocker ->done
2)install it on your device (not on SD card!) ->done
3)and unhide your ExtROM.-> done
4)Then perform a soft reset. ->done
5)After that, unlock your ExtROM. ------> how to do this
6)Perform a soft reset.
Click to expand...
Click to collapse
2) install on Storage, not on RAMdisk either
This step should show in Start>Programs 4 icons (shortcuts) named
-unhide ExtROM (use for step 3)
-hide ExtROM (do not use)
-unlock ExtROM (use for step 5)
-lock ExtROM (do not use)
Do not look for a FILE called Unlock! It is a SHORTCUT in the PROGRAMS folder.
If after step 4 you either do not see the unlock icon, or if it shows some neutral icon instead of something that looks like a yellow padlock, or if you get a "unknown certificate" error when you cilck this icon, it probably means that you accidentally did install on RAMdisk or SD card. In those cases go to Settings>Install>Remove Software, select ExtROM Unhide/Unlocker>remove, soft reset, install again, this time to Storage, EXTROM should still be unhidden so go straight to step 5 and so on till DOCtool is finished.

Maggy said:
2) install on Storage, not on RAMdisk either
This step should show in Start>Programs 4 icons (shortcuts) named
-unhide ExtROM (use for step 3)
-hide ExtROM (do not use)
-unlock ExtROM (use for step 5)
-lock ExtROM (do not use)
Do not look for a FILE called Unlock! It is a SHORTCUT in the PROGRAMS folder.
If after step 4 you either do not see the unlock icon, or if it shows some neutral icon instead of something that looks like a yellow padlock, or if you get a "unknown certificate" error when you cilck this icon, it probably means that you accidentally did install on RAMdisk or SD card. In those cases go to Settings>Install>Remove Software, select ExtROM Unhide/Unlocker>remove, soft reset, install again, this time to Storage, EXTROM should still be unhidden so go straight to step 5 and so on till DOCtool is finished.
Click to expand...
Click to collapse
Maggy's step by step instruction is very helpful, have succeed to make my ExtROM works on my device now.
Thank you very much!

30 mb is the max storage enhancement possible?

keerttttt said:
30 mb is the max storage enhancement possible?
Click to expand...
Click to collapse
Yes, as far as any of us know. It takes either an incredible genius, an incredible discovery about our hardware or a soldering iron to change this fact.

OK, instructions in the first post refined once again
30 mb is the max storage enhancement possible?
Click to expand...
Click to collapse
Yes, as far as any of us know. It takes either an incredible genius, an incredible discovery about our hardware or a soldering iron to change this fact.
Click to expand...
Click to collapse
Well, there's only that amount of NAND ROM memory in Himalaya, so it can't go further...

utak3r said:
OK, instructions in the first post refined once again
Well, there's only that amount of NAND ROM memory in Himalaya, so it can't go further...
Click to expand...
Click to collapse
Well done. thank you utak3r.

utak3r said:
OK, instructions in the first post refined once again
Click to expand...
Click to collapse
Good job! Perhaps a bit more stress (bold?) on the shortcuts? Although there will always be noobs trying to find programs using File Explorer...
Well, there's only that amount of NAND ROM memory in Himalaya, so it can't go further...
Click to expand...
Click to collapse
Never say never. Not the NAND ROM itself is the limit but the fact that the OS currently only allows itself to look there for Storage. In theory a kernel hack or a driver could change all that.

thank a lot

Restore ..
Hi folks,
what happens with my (in Extrom) installed applications if I use the DOCTools Restore function ? Will they simply be overwritten ?
So long
honkBB

Mobile 6 & 6.1 applications , themes, problems and ideas

Mobile 6 & 6.1 - The whole story.
I am trying to put together this one super thread of applications that we like and dislike , the problems and advantages of them. As people add to the list I will add them to the first set of posts so as to make reading a lot easier once the thread grows. The first posts will also have the post # that it refers to, to also help in easier reading for others.
I will personally try to test as much software as possible if not every piece thats questioned about. The phone I am using is the t-mobile wing until I get my hands on a few other phones.
Please no flaming as I am sure tons of noobs will be drawn to this thread. All I ask is if you cant read the first page then leave, because you know people are going to flame you no matter what.
So there you have it people one thread to ask complain and say what you feel about any aspect of mobile 6 & 6.1.

Arcsoft MMS - One of the best choices in MMS & SMS messaging. Post #9
Cooking your splash screen - to make your own custom splash screens for your phones. Post #14
"ivanmmj's original thread"
Duprade's Keyboard Fix - The best keyboard fix for hardware keyboard mismatches.
"duprade's thread"
HTC Audio Manager - The finger touch ease and smoothness that a HTC phone deserves. Post #25
"free download"
HTC Home - A wonderful addition to and today screen. A seem-less application with multiple applications and uses.
"emunutz's Thread"
ITsPapaBlack Skin-Pack - The black skin set for herald phones and many others. Post #30
"papas thread"
Magic SS - A screen capture utility which a phone should not be without. My first choice for screen shots.
"authors site"
Oxis Hibernate - A sweet utility to free up as much memory as possible. Post #11
"Official Site."
UltimateLaunch - Works flawlessly by my standards. So customizable that how can you resist. Post #10
"Official Site."

Saved for the future part 2 ............

Saved for the future part 3 ............

Saved for the future part 4 ............

Saved for the future part 5 ............

Saved for the future part 6 ............

Saved for the future part 7 ..............

moSess said:
PURESKILLZZZ thanks for the reply.
its just the first post leads me to an open touch release and the part thats relevant isnt very clear(about mms setup).as far as deleting arcsoft from the registry gos.
the second is very helpful but the fact that im uncomfortable deleting registry values that aren't specicific cancels it out.
any help and the diligent yet apprehensive reader of this great forum that gets made fun of by his wife for staring at the screen to read so much usefull info would be greatly appreciated!
Click to expand...
Click to collapse
The MMS walk through for non-working MMS. ( Originally by ndiguy5 )
1.) Remove MMS from the registry.
2.) Registry: HKLM\Software\Arcsoft\ArcSoft MMS UA
3.) Now install Arcsoft_MMS_4281 to install MMS back to phone.
4.) Install network wizard, if you have it already installed skip this and goto the next step.
5.) Now use the network wizard to set up your settings.
6.) It should ask you to soft-reset.
7.) Now you should have a working MMS. If any problems post and I will try to assist you.
"**DOWNLOAD**"

UltimateLaunch description
UltimateLaunch is a powerful plugin for the Windows Mobile today-screen. It provides as many tabs as you like, where you can place other today-plugins and icons to start programs. Switching between tabs can be performed in a modern way with your fingers, by sliding in the desired direction. The switching process will be animated. Almost everything can be individually adjusted.
Here are some key features of "UltimateLaunch":
· unlimited number of tabs on the today-screen
· smooth animations of tab-switches (cube, slide, blend, turn, stripes)
· integrate other today-plugins
· nice 32Bit icons in any size, to launch applications
· (alternative normal program-icons)
· completely operatable with fingers
· application launch, by tipping on the symbols
· switch tab, by sliding left/right with the finger
· start additional programs, by sliding up/down
· display of system state (battery, time)
· many settings, for the own liking
· very friendly in the usage of memory!
· and more
Limitations:
· You can try this application, as long as you like. No restriction in the range of functions. After a while, there will be a short text in the background, when UltimateLaunch is not yet activated.
Requirements:
· Windows Mobile 5/6
"Official Site

Oxios Memory 1.40
Release memory on your Windows Mobile (Freeware)
Oxios Hibernate attempts to release as much memory as possible without damaging the internal state of the Windows Mobile device (Pocket PC or Smartphone).
Oxios CloseApps closes down other applications by sending "Close" messages.
Oxios Hibernate 1.40
WM_HIBERNATE is a window message that is generated by the Windows operating system and sent to an application when system resources are running low. All applications should get the message and handle it by attempting to release as many resources as possible by unloading processes, destroying windows, or freeing up as much local storage as possible without damaging the internal state of the system.
Oxios Hibernate sends WM_HIBERNATE to all applications.
Oxios CloseApps 1.40
Each process started on a Windows Mobile-based Smartphone allocates memory, which cannot be released but is automatically freed when the application process ends.
Oxios CloseApps closes down all applications by sending WM_CLOSE messages.
Info: There is no way to suppress the dialog box!
"Official Site"

Where can i post POSITIVE feedback sos not make clutter?

moSess said:
Where can i post POSITIVE feedback sos not make clutter?
Click to expand...
Click to collapse
You can just normally post. I saved many spots in the beginning of this thread so it wont be a big mess.
Also as it grows I will always put the post numbers next to a particular application or fix so when people read they can get all info from the first page so you don't have to read the whole thread to solve an already solved problem or read about an application.

Cooking your Splash Screen
Once again many thanks to all who helped me papamopps who is a great teacher and will have you laughing as he teaches. I am sure all his students love him for his humor. And it was his idea for me to start this whole thread here. zcink who always quietly finds his solution and will always share. Dutty for his wonderful nbhtool as his work is legendary already. Dark Simpson for his htc rom tool. And all the others who helped me learn and the noobs who got me searching for answers.
And last but surely not least ivanmmj Who started this thread and brought this to our attention. Also ttran001 who wrote the original how to, all I am doing is making it easier for people to use and supplying all the files.
"DOWNLOAD"
I have included a folder named "PURESKILLZZZ Splash Screen" for you to test before doing anything at all. This folder is my splash screen that I created and tested on a t-mobile wing. I have also included my image file that I used in-case you just want to go through the process before you create your won.
1.) Download all files needed. ( I made 1 download for everything. )
2.) get the picture you want to use for your splash screen.
3.) Copy the image you would like to use into the image folder.
4.) Open up the Step 1 folder and run the Replace SplashScreen.exe file.
5.) Click on Load Bitmap from the newly opened menu (Replace Artemis SPlashScreen.
6.) Click on the Update Splash button.
7.) The PDA Phone ROM Update Utility 3.0.3.1 menu will pop up. Leave it alone.
8.) Go back to the image folder for step 1 and locate the RUU_signed.nbh file.
9.) Copy the RUU_singed.nbh and place it into the RUU_signed folder.
10.) Go back and close out both PDA Phone ROM Update Utility 3.0.3.1 and Replace Artemis SplashScreen.
11.) Now go to the step 2 folder and double click on the nbhtool.exe.
12.) This will open up Dutty's good NBH tool v1.1.
13.) Click on the Decompile NBH file button.
14.) Browse back to the RUU_singed folder and locate the new RUU_signed.nbh file.
15.) Choose the same location or the one of your choosing to save the extract files.
16.) Once completed it will extract a new file called PrimarySplash.nb, this is your new Splash replacement file.
17.) OK now goto folder step 3.
18.) Open htcrt.exe file ( this is the HTC_ROM_Tool. )
19.) The htc rom tool screen will popup.
20.) Click on the Build! button.
21.) On this screen click on the box under the Device: to select your device type.
22.) Choose Herald
23.) Type in your version of the rom, example: 4.10.0002. (Thats what I used)
24.) Click on the box Splash 1 to choose your PrimarySplash.nb file
25.) Click on the Build ROM botton.
26.) The save to screen will open
27.) Save "ruu_signed" in the folder "step 4"
28.) OK ... Now we have a nbh file in the folder ready to flash
29.) Goto folder step 4 where you can flash your splash screen.
30.) Any questions just ask........

Will love to try it out, Thanks

snowbreeze said:
Will love to try it out, Thanks
Click to expand...
Click to collapse
You are welcome ....

PURESKILLZZZ said:
Cooking your Splash Screen
23.) Type in your version of the rom, example: 4.10.0002. (Thats what I used)
24.) Click on the box Splash 1 to choose your PrimarySplash.nb file
25.) Click on the Build ROM botton.
30.) Any questions just ask........
Click to expand...
Click to collapse
My Setttings -> Device Information -> shows ROM version as 4.17.405.2 WWE
what should I be entering?
Previously, when my device was a boxed-product it used to display the IPL, SPL on booting up, but after upgrading using the help found here, it only shows me the htc screen and I can only check the IPL/SPL if I go to the boot loader mode. The htcrom tool shows some options on the right side. Would entering the values there provide the values for IPL/SPL on booting?
How do I select the PrimarySplash.nb file? There is no selection box available. N checkin again, I see that nothing can be edited in the boxes on the right.
EDIT: Didn't realize that those were buttons next to the text boxes, so the 3rd question is answered. The first 2 remain...
regards
Prashant

sprashant123 said:
My Setttings -> Device Information -> shows ROM version as 4.17.405.2 WWE
what should I be entering?
Previously, when my device was a boxed-product it used to display the IPL, SPL on booting up, but after upgrading using the help found here, it only shows me the htc screen and I can only check the IPL/SPL if I go to the boot loader mode. The htcrom tool shows some options on the right side. Would entering the values there provide the values for IPL/SPL on booting?
How do I select the PrimarySplash.nb file? There is no selection box available. N checkin again, I see that nothing can be edited in the boxes on the right.
EDIT: Didn't realize that those were buttons next to the text boxes, so the 3rd question is answered. The first 2 remain...
regards
Prashant
Click to expand...
Click to collapse
Enter the numbers as you see them . But to see if you can use them as they are flash the included splash screen . If it works you can use same number as me. for question #2 the values you want are on the bootloader screen.

It works
PURESKILLZZZ said:
Enter the numbers as you see them . But to see if you can use them as they are flash the included splash screen . If it works you can use same number as me. for question #2 the values you want are on the bootloader screen.
Click to expand...
Click to collapse
The screen worked. I now have a startup screen of Optimus Prime . The IPL/SPL however was also asking for nb files, dosen't allow to enter the values directly, so I havent tried that out. If you have an idea, do let me know.
n thanks a lot for the instructions...
regards
Prashant

sprashant123 said:
The screen worked. I now have a startup screen of Optimus Prime . The IPL/SPL however was also asking for nb files, dosen't allow to enter the values directly, so I havent tried that out. If you have an idea, do let me know.
n thanks a lot for the instructions...
regards
Prashant
Click to expand...
Click to collapse
Screenshot Please...

[Q] some .exe that could be removed from most himalaya rom's ?

i have found some .exe in most himalaya rom's "\Windows" folder that seem too be not needed so they could be deleted from future kitchens and stuff.
anyway here they are with screenshots..
1.sms_alert_fix.exe-pretty obvious.
2.SimLock.exe-i think something to do with unlocking sims (eventhough i've never used it).
3.cgacutil.exe-it shows you what version of NetFrameWork you are running (not sure if it gets installed as defult when NetFrameWork is installed.
4.hwhelp.exe-seems to be left from the keyboard option of character recognizer.
5.wrlsmgr.exe-maybe a part of the himalaya wireless driver.
can these be removed or deleted safely?
any ideas?

advanced15 said:
i have found some .exe in most himalaya rom's "\Windows" folder that seem too be not needed so they could be deleted from future kitchens and stuff.
anyway here they are with screenshots..
1.sms_alert_fix.exe-pretty obvious.
2.SimLock.exe-i think something to do with unlocking sims (eventhough i've never used it).
3.cgacutil.exe-it shows you what version of NetFrameWork you are running (not sure if it gets installed as defult when NetFrameWork is installed.
4.hwhelp.exe-seems to be left from the keyboard option of character recognizer.
5.wrlsmgr.exe-maybe a part of the himalaya wireless driver.
can these be removed or deleted safely?
any ideas?
Click to expand...
Click to collapse
SMS_Alert_Fix will revive your phone when you will get a sms.
Simlock is really weird.
cgacutil is funking needed.
hwhelp is not needed but I don't want to know what will happen when deleted
wrlsmgr is needed for people who have SDIO Wifi card which himalaya support.

thats it then SimLock.exe is getting deleted and i will see what happens!

Here is what I removed to get free sectors in My WM6.1. The only way to learn effectively is: trial and error. Next try to read and understand the registry. It's all in there.
http://www.mediafire.com/file/xonmumuhkmy/Removed.rar

muckelmaus said:
Here is what I removed to get free sectors in My WM6.1. The only way to learn effectively is: trial and error. Next try to read and understand the registry. It's all in there.
http://www.mediafire.com/file/xonmumuhkmy/Removed.rar
Click to expand...
Click to collapse
msim is keyboard right?
wisplite is totally unneeded, you can delete it but don't forget to delete registry entries in shell

also i know these can be deleted bcuz they are to do with error reporting and feedback-
DwXfer.dll
dw.exe
ceipui.exe
and also this-
BackPack.dll
hey muckelmaus these are needed for keyboard-
msim.dll
msim.96.dll
this for the 4 dots you have to tap when you first start up a new rom-
welcome.exe
and this is one of your splash screens-
welcomehead.96.png
and this is used for the search device for file function-
shfind.exe
otherwise i cannot see any problem with deleteing the rest of them...

i have also found this on a other part of xdadev-
*
Hd.dll
*
Aosaxst0.dll
*
Mencfilt.dll
Here Hd.dll and Aosaxst0.dll are used for M$ debug. Like some times on pc the apps close itself, and windows asks you to send the details to M$ (example. error number : 893647). We ( users) don’t know what it means, only the developer in M$ know. But I never saw these files report anything to us. SO!!! We don’t need them! they are trash!!
Now Mencfilt.dll is for storage card encrypt. If you don’t use it, you can delete it as well. Have you had this experience where after flashing a new Rom every thing in storage card can’t show any more!!!! but its still use the space in the card. Yes it's because of this file only.
**NOTE: There are some device in which removing these files causes system issues so be careful. But only a few devices

advanced15 said:
also i know these can be deleted bcuz they are to do with error reporting and feedback-
DwXfer.dll
dw.exe
ceipui.exe
and also this-
BackPack.dll
hey muckelmaus these are needed for keyboard-
msim.dll
msim.96.dll
this for the 4 dots you have to tap when you first start up a new rom-
welcome.exe
and this is one of your splash screens-
welcomehead.96.png
and this is used for the search device for file function-
shfind.exe
otherwise i cannot see any problem with deleteing the rest of them...
Click to expand...
Click to collapse
As I used a german 'qwertz' keyboard and a smaller splash screen, these files are just overwritten in my rom. These are backups.
I skip the Touchscreen alignment at first bootup (it doesn't work anymore after changing initflashfiles.dat)
Did you ever try to use * as a joker with the search program? Totally useless, so it is overwritten by a better app, renamed to: shfind.exe.

muckelmaus said:
As I used a german 'qwertz' keyboard and a smaller splash screen, these files are just overwritten in my rom. These are backups.
I skip the Touchscreen alignment at first bootup (it doesn't work anymore after changing initflashfiles.dat)
Did you ever try to use * as a joker with the search program? Totally useless, so it is overwritten by a better app, renamed to: shfind.exe.
Click to expand...
Click to collapse
You did something wrong if touchscreen alignment does not work after rewriting initflashfiles.

aeroflyluby said:
You did something wrong if touchscreen alignment does not work after rewriting initflashfiles.
Click to expand...
Click to collapse
It didn't bother, everything worked 'till I deleted some files in startmenue and rearanged the programs. But noone told me that he missed the feature. Approximately 300 users over all. Even if some of them only tested. For me it was OK, and I'm still running it from the very first day, without any need of a new hard reset 'till now.

muckelmaus, why do you have a smaller startup screen?

I reduced the size of the files to get some kB/sectors free, as my rom is full of third party apps.

muckelmaus said:
I reduced the size of the files to get some kB/sectors free, as my rom is full of third party apps.
Click to expand...
Click to collapse
As I remember you can put JPG file as welcomehead
there is 2 solutions:
Save as jpg file and then just rename into .png
Save as jpg and change registry entry in redist dpi 96
by the way:
look at this:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Splash Screen]
"MSBitmap"="\\windows\\welcomehead.96.png"
"MSTimeout"=dword:7530 ; 30000 milliseconds
"CarrierBitmap"="\\windows\\welcomehead.96.png"
"CarrierTimeout"=dword:7530 ; 30000 milliseconds
Click to expand...
Click to collapse
maybe we could have 2 splash screens and change their duration on screen
So, when combined with bootloader 2 splashes (as I post tutorial to change it easly) we can have 4 splashes.
Good for doing PC boot images as I did before hima died my work in attachment
(I know that hima does not have AMD Althon but it seems good)

simlock.exe
simlock.exe is all ok too delete...
no problems deleting in AK6.

advanced15 said:
simlock.exe is all ok too delete...
no problems deleting in AK6.
Click to expand...
Click to collapse
hwhelp.exe - is ok to delete as well
done in AK6 ,no problems !

[kitchen][keko's]Ruu_Signed_0410/0409

This is my first cooked Rom based on Ruu_Photon_HTC_ITA_1.07.408.1_Radio_Signed_2010035_Ship, lightweight and fast, removing other unnecessary applications and increased memory, personalized homepage, calendar, fingerprints, lockscreen ........ .
Installation:
1) Unzip the file on your desktop and extract the folder Rom
2) Connect the phone to the PC with the USB cable.
3) Open the folder with the Rom and the right mouse button (run as administrator, Windows 7) DFT_SSPL_MINI.(If you do not see the USB device at the bottom of the screen and the RUU Showed a connection error, disconnect the device and connect it again ... Should be there now USB. then just run the SSPL_RUU.exe again, flashing will start now.).
4) Run step by step everything you say the program.
ATTENTION
This product is free to use, but at your own risk. We take no
Any responsibility for conflict, fault, or damage Caused by
this unlocking procedure. No warranties of Any Kind Are Given.
We have tested our product on Several devices and have not
Any problems found with it.
Download:Ita https://rapidshare.com/files/3046665379/Rom_ITA.rar
Download:Eng https://rapidshare.com/files/3508589116/Rom_Eu.rar
And finally, download the attached file below and install all the cab file, have fun.

nice work keko68 !! but could you mention that there are additional applications ??
if it exists

Hakim Rahman said:
nice work keko68 !! but could you mention that there are additional applications ??
if it exists
Click to expand...
Click to collapse
No there are no other additional applications, or just removed the other applications and unnecessary increase in memory but the Personalized Home, calendar, footprints, lockscreen .........

Hello Keko68,
I just back from Droid after sometime and flash your rom in..its work fine and stable and battery consumption very less. i'm happy with it after i install my need (this is for waittin Droid to be fully work I may switch back again).
just one thing, as you mention that this is you kitchen, do you mind to share it here to let our little chef here able to do some work (incld me). thks in advance.

ssamth2003 said:
Hello Keko68,
I just back from Droid after sometime and flash your rom in..its work fine and stable and battery consumption very less. i'm happy with it after i install my need (this is for waittin Droid to be fully work I may switch back again).
just one thing, as you mention that this is you kitchen, do you mind to share it here to let our little chef here able to do some work (incld me). thks in advance.
Click to expand...
Click to collapse
Okay go ahead, no problem there.

keko68 said:
Okay go ahead, no problem there.
Click to expand...
Click to collapse
thks keko68, but where we can get your kitchen? the one you post only your cooked rom.

ssamth2003 said:
thks keko68, but where we can get your kitchen? the one you post only your cooked rom.
Click to expand...
Click to collapse
Sorry but do not find them in the first post RUU files?

keko68 said:
Sorry but do not find them in the first post RUU files?
Click to expand...
Click to collapse
may be some mis understand, I mean your kitchen tools to cook the rom, not the ready cooked rom. BTW, thks for you quick respond.

ssamth2003 said:
may be some mis understand, I mean your kitchen tools to cook the rom, not the ready cooked rom. BTW, thks for you quick respond.
Click to expand...
Click to collapse
Interested in Manila and all png files that are used in the ROM or program for cooking?

keko68 said:
Interested in Manila and all png files that are used in the ROM or program for cooking?
Click to expand...
Click to collapse
I'm with your rom now, and i'm haapy with it. but actually there's lot of things that i dont need and also some thing i want to add. so if you not mind can you share all of your cooking tools? thks for your kind.

Hi keko! thank you for your developing!
first: excuseme for bad english!
can u put your boot animation and kenchan theme?

keko68 said:
This is my first cooked Rom based on Ruu_Photon_HTC_ITA_1.07.408.1_Radio_Signed_2010035_Ship, lightweight and fast, removing other unnecessary applications and increased memory, personalized homepage, calendar, fingerprints, lockscreen ........ .
Installation:
1) Unzip the file on your desktop and extract the folder Rom
2) Connect the phone to the PC with the USB cable.
3) Open the folder with the Rom and the right mouse button (run as administrator, Windows 7) DFT_SSPL_MINI.(If you do not see the USB device at the bottom of the screen and the RUU Showed a connection error, disconnect the device and connect it again ... Should be there now USB. then just run the SSPL_RUU.exe again, flashing will start now.).
4) Run step by step everything you say the program.
ATTENTION
This product is free to use, but at your own risk. We take no
Any responsibility for conflict, fault, or damage Caused by
this unlocking procedure. No warranties of Any Kind Are Given.
We have tested our product on Several devices and have not
Any problems found with it.
Download:Ita https://rapidshare.com/files/3046665379/Rom_ITA.rar
Download:Eng https://rapidshare.com/files/3508589116/Rom_Eu.rar
And finally, download the attached file below and install all the cab file, have fun.
Click to expand...
Click to collapse
Really Nice work...ben fatto!

the links are dead ,please reupload