hey ive been having this problem for the past couple days and was wondering if anyone has experianced the same thing or could shed abit of light on it.
basically whenever writing a text, or word document or typing a web address, etc and i click on the letter "w" nothing comes up and the phone crashes, doesnt let me type anything, goes super super slow and doesnt really respond to nething so i have to reset it. this happens when using the "w" on the on screen keyboard and on the pull out keyboard.
i havnt dropped it recently and its in perfect condition, also havnt installed anything recently that may hav caused it. it just seemed to randomly start happening. will have to try a hard reset if theres no other solution, but any ideas would be greatly appreciated?
I would suggest a hard reset. If it is a software error that should do the trick.
But i guess this has something to do with hardware. I had that problem with my wizard. The commanager button caused the device to crash. Once I opened it I found about 1 kg of dust sitting behind the button. Once that was out of the way the device was normal again.
edit: Just try opening the device as a last resort.
here you can find the service manual. Link removed - no longer valid
thanks mate, may try a hard reset then. but i'll leave it till weekend after exams have finished as its quite time consuming installing everything again, etc.
i perhaps should have mentioned that it only crashes if "w" is the first letter i use. if i type something else an then use it, it seems to work. (altho i havnt tested this properly, i'll assume this is usually the case). just seems like a very strange problem to get
anywayz, thank you for ur advice
nice screen name Is this a stock ROM or a cooked one? maybe the keyboard fix would correct it?
fade2black said:
nice screen name Is this a stock ROM or a cooked one? maybe the keyboard fix would correct it?
Click to expand...
Click to collapse
haha thank you.. umm.. its the default one that came with the t-mobile mda vario III. was working fine up until the other day.. whats this keyboard fix u speak of tho?
I have almost the same problem with my "w" key also. I have to press it longer than i do other keys to get it to type a "w" and when i do it causes a slow down on my phone.
sounds like its time for a song..
http://myspacetv.com/index.cfm?fuseaction=vids.individual&videoid=1022602
lol.. u can spell out the name of the band without the letter W.. so its good.
flobots - No "W"
anyway.. on topic.. wat rom is A7LAS using?
hi everyone.
i was wondering if anyone can help me with this. so ive had my tilt for about 6 months now. and i havent had any problems until now. The keyboard doesnt work at all now. and the dial and hang up button on the front of the phone dont work. The touch touch screen works fine. But the keyboard doesnt work at all, and nor do the buttons on the front work (except for the middle button, and when i press it, it brings me to the screen alignment). i was wondering if anyone can help me fix this.
i dont have insurance on the phone, and im not sure if its some kind of software issue. I tried doing the update on the phone, but it tells me there are no current versions. I also tried doing the softreset and taking out the battery. Deleting everything on the phone and going back to stock software.
if anyone can help me id greatly appreciate it. thanks.
your phone does have a 1 year warranty on it. Turn phone to stock (rom, spl, etc) and get it exchanged for another unit.
Hello everybody! This is my first post.My name is Matt, I'm from Poland.
I have big problem with my Kaiser ;/ When i want click something on the screen by taping or clicking a button, the phone dont reaction
Please help me
When you say there is no reaction, do you mean that the phone is just slow, and takes a few seconds, or do you mean that the phone doesn't acknowledge the tap at all? If it is the second one, it may be a hardware problem. How long have you had the phone? When did this start happening, and did you do anything you think may have caused it?
Dave
i have Kaiser six months.Maybe You're right, this is possible hardware problem ;/
ohh my God
Soft then Hard Reset?
I had a similar issues many months ago. I still don't know what locked it up, but I ended up hard resetting, which cleared it up. Thank God for SPB backup.
Good Luck
Ok, I do a hard reset and check the problem again
Ok, this might be the first real problem I've had with my tilt, in a sense that I have no freakin clue what happened or how to fix it. The front buttons on the tilt as well as my keyboard decided they wanted to stop working and I have no clue how to bring them back... let me start from the beginning.
I installed m2d about 2 weeks ago, its kind of laggy but I'm still impressed with the overall UI as it compliments the tilt. Some bugs started popping up here and there but through the forum I was able to make it run relatively smoothly. Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts together. Than today my screen would wake up for no reason, with no programs or application running in the front or background of the device. It was annoying to say the least. Than I got my first text of the day and went to respond using the actual keyboard, no dice. No response from the keyboard. So as Im typing using the stylus I tried to delete something, and the backspace button on the touch keypad isn't working, so more problems. I want to try and hard reset the device to see if that fixes the problem, but since I can't use the hard buttons on the front of the device I can't hard reset (the scroll wheel, ptt, and ok buttons aren't working either) Is this anything anyone has ever heard of? My tilt is kind of battered after a year of use, but nothing significant has happened within the last month to make me think that something inside came loose, especially since this just started today and it was just sitting on my table all night. I appreciate any and all help. Thanks in advance.
might be "m2d" not compatible ... hair wired ..
I wonder ..whether we can install window CE from pc to h/p through usb link ...
"Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts"
r u using original usb cable ..b'cos now a day I saw many only using normal "small" usb cable head which easily spoil the connector at phone ... too loose for that sharp..
l3urton32 said:
Ok, this might be the first real problem I've had with my tilt, in a sense that I have no freakin clue what happened or how to fix it. The front buttons on the tilt as well as my keyboard decided they wanted to stop working and I have no clue how to bring them back... let me start from the beginning.
I installed m2d about 2 weeks ago, its kind of laggy but I'm still impressed with the overall UI as it compliments the tilt. Some bugs started popping up here and there but through the forum I was able to make it run relatively smoothly. Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts together. Than today my screen would wake up for no reason, with no programs or application running in the front or background of the device. It was annoying to say the least. Than I got my first text of the day and went to respond using the actual keyboard, no dice. No response from the keyboard. So as Im typing using the stylus I tried to delete something, and the backspace button on the touch keypad isn't working, so more problems. I want to try and hard reset the device to see if that fixes the problem, but since I can't use the hard buttons on the front of the device I can't hard reset (the scroll wheel, ptt, and ok buttons aren't working either) Is this anything anyone has ever heard of? My tilt is kind of battered after a year of use, but nothing significant has happened within the last month to make me think that something inside came loose, especially since this just started today and it was just sitting on my table all night. I appreciate any and all help. Thanks in advance.
Click to expand...
Click to collapse
Go to Start/Settings/System/Clear Storage
and your usb is probably whack
@kaiserII...your usb is whack, haha. that **** made me laugh.
having same exact issue
ya it happened to me sunday night, having exact same problem. keyboard doesnt work, and my front buttons dont work exept for the the center button which ends up opening the start menu (wrong command). Im over my 1 year warrenty and not sure what to do. Had to buy a cheap 40 dollar nokia for the time being, please help if someone can. Oh and I did a hard reset, and it didnt fix anything. Booted android with it and 1 out of 5 times the buttons came back, this is really weird/vexing.
l3urton32 said:
Ok, this might be the first real problem I've had with my tilt, in a sense that I have no freakin clue what happened or how to fix it. The front buttons on the tilt as well as my keyboard decided they wanted to stop working and I have no clue how to bring them back... let me start from the beginning.
I installed m2d about 2 weeks ago, its kind of laggy but I'm still impressed with the overall UI as it compliments the tilt. Some bugs started popping up here and there but through the forum I was able to make it run relatively smoothly. Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts together. Than today my screen would wake up for no reason, with no programs or application running in the front or background of the device. It was annoying to say the least. Than I got my first text of the day and went to respond using the actual keyboard, no dice. No response from the keyboard. So as Im typing using the stylus I tried to delete something, and the backspace button on the touch keypad isn't working, so more problems. I want to try and hard reset the device to see if that fixes the problem, but since I can't use the hard buttons on the front of the device I can't hard reset (the scroll wheel, ptt, and ok buttons aren't working either) Is this anything anyone has ever heard of? My tilt is kind of battered after a year of use, but nothing significant has happened within the last month to make me think that something inside came loose, especially since this just started today and it was just sitting on my table all night. I appreciate any and all help. Thanks in advance.
Click to expand...
Click to collapse
Exactly the same thing has happened to me!! Coming on randomly, draining the battery really quickly and the same keys doing the same things as yours i.e. nothing or Start menu. The backspace and space don't work on the on-screen keyboard either. Is it the end of the road or has anyone the slightest idea what the hell to do!?!?!?
Same issue but slightly different
2 days ago I started hearing a noise from my phone that was not something I normally hear. After checking my phone I found out it was the voice recorder program opening up on its own. It started repeatedly doing this and recording automatically. I had to hold down the close option (X) and before it would stop. AFter a reset and when the phone wakes up it always does this now. Along with all these whacky problems my hard buttons stopped working. My scroll wheel and D-pad sometimes work and only the up, down, left and right arrows work on the keyboard. Camera button seems to work sometimes also. All others have stopped responding. Except for holding the power key. I just reflashed my phone to latest phoenix ROM and problem is the same. Is this it for the phone or is there a fix.
Anyone??? Please!!
Try this free fix
I had the same problem as the original poster. My fix was to download AE Button Plus trial and use it to reset my keys to their original setting. I did not have to do the keyboard, just the external keys. Now my tilt works like it used to.
This fixed the problem when clear storage and reloading roms did not.
It doesn't hurt to try since the trial is free.
Good Luck,
Will
same here... help pls...
any one yet has found a solution for this issue??? 2days ago my Kaiser suddenly started with same problems, buttons dont work and the recorder goes on, any one yet found a way to fix it??? thanks...
I have no idea if this will actually help anyone but I installed japanese input on my kaiser once and during the process a registry got edited that stopped my hardware keyboard and the hardware keys (front keys) from working and the fix was to correct the value:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010411]
edit the 0010411 value to "00000409"
again I have no idea if this will help but it wouldnt hurt to check to see if the registry somehow got changed. Goodluck and I hope you guys figure it out.
didnt work...
dantegl36 said:
I have no idea if this will actually help anyone but I installed japanese input on my kaiser once and during the process a registry got edited that stopped my hardware keyboard and the hardware keys (front keys) from working and the fix was to correct the value:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010411]
edit the 0010411 value to "00000409"
again I have no idea if this will help but it wouldnt hurt to check to see if the registry somehow got changed. Goodluck and I hope you guys figure it out.
Click to expand...
Click to collapse
thanks anyways "dantegl36" but it didnt work...
I have the same issue
This is intresting, I just posted on this, as I am having the same issue, which of course just started a few days ago. I have the updated UI as well but I installed it as well.
Any idea how to fix it??
keyboard fix "edfc" problem
yes , kaiser tweak slide wake disabled ...it OK
Greetings from Olsztyn Poland
Unfortunately, the problem returned it was only a temporary improvement, sorry
For my tytn2 after rom upgrade, the front buttons do not respond except the central one. the side buttons are responding under the win only but in the bootloader screen they don't respond. and I cannot make a hard reset.
I did a hard reset through the setting menu but still the problem has not been solved. Adding on that the keyboard doesn't work except the arrow keys.
Do anyone can figure a solution for that. except the hardware problem bec I am out of warranty.
Did anyone was able to solve the problem fully?
oo wow, i have the same problem. hope theres a fix
adding to that the the bluetooth is turnino on by itself even if I switched it off and the device by itself after time of switching it off it refuse to start again unless I did a soft reset.
I tried all the avilabe suggestion but nothing worked.
Hiya
This seems to be a problem with the TyTn II - there are several threads in this forum about it, none of which have any working solutions that I ever found...
I spent ages trying different ROMS, Radios and pressing of buttons and haven't found a solution - other than to disown the TyTn II and get another phone! I did pick it up again the other day and it is still refusing to have working buttons or keyboard (as reported by others, only the central buttons seems to work all the time as a Start Menu button).
I did manage to stop it eating battery at a ridiculous rate by turning it to specific radio settings rather than letting it find its own GPRS/ 3G and phone band. I think it was in this thread
I was considering sending my TynTn II to HTC, but I'm not sure it's going to be worth the postage and their service fees as I've already replaced it with a Touch Pro 2. Then again if we ALL sent them in, they might acknowledge some sort of problem with this model.
samstables said:
Hiya
This seems to be a problem with the TyTn II - there are several threads in this forum about it, none of which have any working solutions that I ever found...
I spent ages trying different ROMS, Radios and pressing of buttons and haven't found a solution - other than to disown the TyTn II and get another phone! I did pick it up again the other day and it is still refusing to have working buttons or keyboard (as reported by others, only the central buttons seems to work all the time as a Start Menu button).
I did manage to stop it eating battery at a ridiculous rate by turning it to specific radio settings rather than letting it find its own GPRS/ 3G and phone band. I think it was in this thread
I was considering sending my TynTn II to HTC, but I'm not sure it's going to be worth the postage and their service fees as I've already replaced it with a Touch Pro 2. Then again if we ALL sent them in, they might acknowledge some sort of problem with this model.
Click to expand...
Click to collapse
can I know how did u mange to change the rom? bec even my side buttons refuse to work whenever I am at the bootloader screen and the upgrade through the active sync failed.
I know it's been said before i've googled it and stuff but when the delete key is hit on my keyboard i get a JHGL and a volume lower key and if i hit the back key on my phone i get a U542i3 input. the phone has NEVER been dropped in water and it just started happening randomly.
is there any solutions i can do myself to open it up and fix it? Im not covered under warranty so that's not an option for me.
ryohazuki said:
I know it's been said before i've googled it and stuff but when the delete key is hit on my keyboard i get a JHGL and a volume lower key and if i hit the back key on my phone i get a U542i3 input. the phone has NEVER been dropped in water and it just started happening randomly.
is there any solutions i can do myself to open it up and fix it? Im not covered under warranty so that's not an option for me.
Click to expand...
Click to collapse
You can take it apart and clean it.
But first, I would investigate possible SOFTWARE issues. Wipe it clean and load a new system on it.
Yeah, my friend gave me the phone stock when it had the problem then I wiped it flashed it etc and the problem still occured.
Can you confirm if this worked? I have a similar issue:
I have a similar problem but not as severe. Almost all buttons work ok, just the buttons in the middle of the hw keyboard like y, h, b and space sometimes print other stuff, b sometimes writes a few characters and opens up the search, n sometimes writes some characters with an 'enter' in between etc. and these random outputs are usually the same, ie I get the same stuff by pressing b over n over again. They work fine after some pressing, and I've noticed if I press these keys immediately after pressing something else, they work fine. The problems has persisted through rooting, flashing, radio change, bootloader change etc. Anyone know what this problem is? Is it a hardware issue should I get it checked? The hardware guys here charge so much I have to be sure before I take this to them. Any way I can correct it myself? Any help would be appreciated.
Click to expand...
Click to collapse
Please let me know.
My torx tools aren't small enough so I haven't bought a pack yet to actually try it yet. Im really interested in fixing this G1 so im not sure yet what to do.
Hi ryohazuki!
ryohazuki said:
I know it's been said before i've googled it and stuff but when the delete key is hit on my keyboard i get a JHGL and a volume lower key and if i hit the back key on my phone i get a U542i3 input. the phone has NEVER been dropped in water and it just started happening randomly.
is there any solutions i can do myself to open it up and fix it? Im not covered under warranty so that's not an option for me.
Click to expand...
Click to collapse
I'm pretty sure it's a hardware problem.
On HTC Dream there are several GPIO's involved with scanning the keypad, hardware keys and trackball sensors.
These GPIO's of the SoC (MSM7201A) inside are connected to 4-line ESD circuits to protect the chip, prevent voltage peaks and stuff.
Please have a look at this post or read the whole thread.
I found out that these circuits might be harmed by some electrical effects. As a result some of the GPIO's are shorted and affect the behaviour of your device in a strange way.
It's not sure what exactely causes this short circuit... maybe some peak voltage while using the wall charger or some strange inductive effect.
Maybe these protection circuits are little bit weak concerning electrical specs.
Whatever, as you might see at the date of my posts in that thread, i fighted several weeks to solve this issue and i'm pretty sure it's the same effect that causes your device to go mad.
Regards,
scholbert
I have this exact issue. I can rework/solder very small parts and would be willing to try your fix but I really don't think it can be a hardware issue, one because everyone gets the same gibberish and two because all keys function normally in recovery console. What am i missing?