Database Develop

Fingerprints, Dirt, enc

Hello folks,
As most of you reading I am a happy Topaz user,
But I find it sad, that I almost do not dare to use the device without stylus
Whenever I touch the phone, it leaves a dirty mark...
And I cannot live with that, So I always want to clean it afterwards
I mean... even with a screen protector installed, it gets dirty too quick,
And I recon I cannot walk around with a bunch of cleaning tools either
So, what's your opinion on this? or do you have a good solution?
Do you care that the screen is dirty, or not? please tell me
Thanks already
- Jeutie

is ok , you can always change screen protector .

jeutie said:
... I almost do not dare to use the device without stylus
Whenever I touch the phone, it leaves a dirty mark...
Click to expand...
Click to collapse
I use an antiglare screen protector I got from Brando (http://shop.brando.com.hk/bw-pda-screen-protector-htc-touch-diamond-2-_p03225c1035d039.html). You lose something in brightness but it is very impervious to dirt and fingerprints.
There is also an hot debate on matte finishing battery cover. I simply painted the original cover using matte spray acrylic paint (http://forum.xda-developers.com/showpost.php?p=3950791&postcount=67) Of course you need a bit of manual dexterity and a brave heart...

I just leave it dirty

I thought about another screen protector aswell... but I think I'll fail again xD
(screen protector was dusty already when I putted it on, But I'll try again.)
Thanks for the information
But Would you recommend the normal screen protector or the Ultra Clear one?

Hi
Yep feel the same, hated touching it when I first got it as any touch leaves a fingerprint, if you try and wipe it away you make it worse. The aluminium surround really shows up finger prints and then smudges and so does the screen even with screen protector on. Even ear prints are clearly visible!
This isn't unique to the Topaz though, the state I've seen some iPhones in
So I just live with the fact it only looks shiny and new after a quick clean with some cleaner and a microfibre cloth, for just a short period of time.
It would help if the back was matt black or rubberised, but it isn't. I really don't understand the people that design these things as surely they must put them through some form of user testing, and I can't believe out of an even tiny group of testers the comment 'finger print magnet' didn't arise.
Regards
Phil

I do have the matt finish ;-) bought it way overpriced on ebay...
But the screen protector didn't help so I was looking for something better
and indeed, the aluminium is even worse xD

jeutie said:
But Would you recommend the normal screen protector or the Ultra Clear one?
Click to expand...
Click to collapse
The Ultra Clear looks and feels as the original screen and as other screen protectors, that is glass like. Therefore, dirt and fingerprints remain very visible.
On the other hand the antiglare has a kind of very small granularity over it. Dirt and fingerprints do not stick to it and fingers, nails and stylus glide very nicely over it. On the other hand, it is not completely transparent, expecially under direct sunlight.

But so, for the fingerprint issue, the normal one should be better, then the ultra clear one, Thanks
I'll order one on Monday, And I'll get someone less clumsy to put it on ^^

PhilipL said:
'finger print magnet'
Click to expand...
Click to collapse
That's a PERFECT DEFINITION! My opinion is that being a "touch" device, we have no great chances to solve the problem on what concerns the screen..Other question is the backVery sexy on picture but fingerprint hungry and sometimes slippy!! Waiting for a mat cover at decent price.BTW congrats to ouram57 for his guts! But is the painting layer resisting,especially at the corners?

sualc said:
BTW congrats to ouram57 for his guts!
Click to expand...
Click to collapse
Well, after all I could always buy a new cover (http://www.expansys.com/d.aspx?i=179389).
sualc said:
But is the painting layer resisting,especially at the corners?
Click to expand...
Click to collapse
The painting is quite resistant but of course scratches accumulate as they did on the shiny original case (but they are a bit less visible). The good news is that on too many scratches paint can be applied again...

You're right! If it's been successfully done once, why not repeat it if needed..
Hoping that none of us will ever need it,http://www.expansys.com/d.aspx?i=179389 is one of the most expensive pieces of plastic on earth

sualc said:
You're right! If it's been successfully done once, why not repeat it if needed..
Hoping that none of us will ever need it,http://www.expansys.com/d.aspx?i=179389 is one of the most expensive pieces of plastic on earth
Click to expand...
Click to collapse
...especially as its not for the TD2, check it out, it has 2 holes at the top and a diamond back!?!
TD1 maybe ???

That "thing" with two holes is also on sale at HTC's:http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=179389 as "original" cover for D2Very affordable as usual.. I get mad if I think it's about 10% of the phone's price. My ideal back cover would be mat gummy black, just like the Kaiser (a.k.a TytnII).. hope someone is going to think about it!

Aright... I have applied the screen protector...
That's great! no more fingerprints on the screen
Together with the backcover and installation of some cabs... my device is totally like I want it
Thanks folks!

[Q]How to remove engraving?

hey, i was wondering if any one was successful in removing their engravings off the back of the nexus one..... i bought mine cheap second hand, but i can't seem to get the engravings off... thanks!

Maybe if you look up in the dictionary of what "engrave" means you'll find your answer. Then again is it possible to un-grave something? Put a cute little sticker over it or something.

Die grinder.

plastic filler
superfine sandpaper
paint
cover engravings with the filler
let it dry
sand down the filler until it's flush with the rest of the phone
wipe off with a wet rag (let dry after)
paint
depending on your painting skills you can make it look halfway decent. You won't make it like new though. The only way to make it not like terrible would be to paint the entire part of the phone where it is engraved. Since the engravings are on the chrome, looks like a whole body job to me.
Good Luck
Update:
Also, seriously you can't google? You do own their phone...
http://www.ehow.com/how_7774043_remove-engraving-nexus-one.html
I'd do this instead.

Toothpaste or Chocolate to wear it down.

Deekayy said:
Maybe if you look up in the dictionary of what "engrave" means you'll find your answer. Then again is it possible to un-grave something? Put a cute little sticker over it or something.
Click to expand...
Click to collapse
sorry, engrave may not be the correct word to use. this is probably laser etching. i'm talking about the etching that google did for people who wanted to customize their phones.
XSafire said:
plastic filler
superfine sandpaper
paint
cover engravings with the filler
let it dry
sand down the filler until it's flush with the rest of the phone
wipe off with a wet rag (let dry after)
paint
depending on your painting skills you can make it look halfway decent. You won't make it like new though. The only way to make it not like terrible would be to paint the entire part of the phone where it is engraved. Since the engravings are on the chrome, looks like a whole body job to me.
Good Luck
Update:
Also, seriously you can't google? You do own their phone...
http://www.ehow.com/how_7774043_remove-engraving-nexus-one.html
I'd do this instead.
Click to expand...
Click to collapse
i did google and i tried that already. didn't even scratch the surface. and the surface is not chrome, its anodized aluminum. which is a pain in the butt to work with...
Jyveafk said:
Toothpaste or Chocolate to wear it down.
Click to expand...
Click to collapse
i tried the sugar cubes, but i believe thats only for silkscreened logos. i doubt either of these will be able to get the laser etched letterings. thanks though.
anyone else who was able to remove the personalized lettering on the back of the N1?

19.95$ back cover on ebay (real one)

The engraving isn't on the back cover, it's on the metal chassis.

Can you not buy a replacement chassis?

Sure you can, but they're not cheap, and I suspect it's a fair bit of work to swap the parts over.

First, it is important to note that the "engraving" is NOT actually engraved in, as some people here seem to believe.
It is merely silk-screened on.
As for removing it, I would suggest a mild abrasive, like tooth paste, and rubbing it with a cotton cloth... it will probably take a lot of elbow grease, but it should work!*
*Note: not responsible if you damage your phone or kill your loved ones with this method.

ngy said:
i did google and i tried that already. didn't even scratch the surface. and the surface is not chrome, its anodized aluminum. which is a pain in the butt to work with...
Click to expand...
Click to collapse
my bad. If you scratch it with your fingernail, can you feel a groove?

GldRush98 said:
First, it is important to note that the "engraving" is NOT actually engraved in, as some people here seem to believe.
It is merely silk-screened on.
As for removing it, I would suggest a mild abrasive, like tooth paste, and rubbing it with a cotton cloth... it will probably take a lot of elbow grease, but it should work!*
*Note: not responsible if you damage your phone or kill your loved ones with this method.
Click to expand...
Click to collapse
can't say its silkscreen for sure. i took a look under the microscope and its retains the same texture as the rest of the aluminum... silkscreened letterings SHOULD have a different, smooth texture.
XSafire said:
my bad. If you scratch it with your fingernail, can you feel a groove?
Click to expand...
Click to collapse
yeah i do feel a slight bump. so i'm led to think its silkscreen or laser etched, leaning more towards laser etching... which means im stuck.

Rusty! said:
Sure you can, but they're not cheap, and I suspect it's a fair bit of work to swap the parts over.
Click to expand...
Click to collapse
i think i may actually do this in the end. i was suggested to use "contact cleaner" as it deoxides materials... but thats precisely what anodized aluminum is... a thicker layer of colored aluminum oxide. it may just strip it all down to the bare aluminum... argh thinking out loud.

I have heard from someone who have tried the same thing known as Contact Cleaner. Haven't tried personally so can't say for certain but hey, what's the harm in trying it out? I don't have any personalization otherwise would have tried it out.

creativedevil said:
I have heard from someone who have tried the same thing known as Contact Cleaner. Haven't tried personally so can't say for certain but hey, what's the harm in trying it out? I don't have any personalization otherwise would have tried it out.
Click to expand...
Click to collapse
really. contact cleaner can really get the thing off? i should try and get my hands on some then, rather than spending $60+ for a new housing. was thinking of sand blasting the whole thing too... and painting it all back. lol. all black nexus.......

ngy said:
really. contact cleaner can really get the thing off? i should try and get my hands on some then, rather than spending $60+ for a new housing. was thinking of sand blasting the whole thing too... and painting it all back. lol. all black nexus.......
Click to expand...
Click to collapse
Please don't do this.
just sand down the aluminum until it is flush with the rest of it, then use different grades of paper until it is smooth
I don't exactly know how close to perfect you can make it, but it's better then sandblasting it.

ngy said:
can't say its silkscreen for sure. i took a look under the microscope and its retains the same texture as the rest of the aluminum... silkscreened letterings SHOULD have a different, smooth texture.
Click to expand...
Click to collapse
I am 99% sure it is silk-screened on, in a similar manner to the Google and HTC logos on the back.

GldRush98 said:
I am 99% sure it is silk-screened on, in a similar manner to the Google and HTC logos on the back.
Click to expand...
Click to collapse
i sure hope so. i think im gonna try the contact cleaner stuff thats been mentioned. while i have my doubts.... i guess i'll just give it a shot. anyone know what removes silk screening?

I think you would damage the surface of you phone.
Put a sticker over it instead.

Making your Nook Display 90% Fingerprint Free

Stealing this post from androidtablets.net from pbrauer, his exact instructions/quote:
"Making your Display Fingerprint-Free and Smudge-Proof for Nook.
This was originally from me for the ViewSonic G-Tab, but I have done this on both of my Nooks with the same excellent results. While I have not gotten the same kind of vendor endorsement as I got from the VS rep, I don't see why there would be an issue for Nooks, they also use an excellent quality glass screen.
So if you are like me, of the most annoying things about the tablets has nothing to do with its functionality, but has everything to do with its display, specifically the darn fingerprints and smudges! There is now a fix for this, tested by many people including myself, and works an absolute treat at curing at least 90% of the issue.
Not only does it prevent almost all fingerprints and smudges but it also gives your display a super silky sexy feel to it.
How to do it? Rain-X! Follow these directions to a super smooth, clean screen that will last at least a month between applications.
1. Clean your screen using a GOOD microfiber cloth and a little bit of water.
2. Repeat step one at least once! You really really want to have your screen as clean and "out-of-the-box" perfect as you possibly can get it. Check it at multiple angles and light to make sure you have no haze, no smudges, no spots.
3. Apply Rain-X to wet the corner of a clean cotton rag
4. Using a gentle swirling motion, apply the rain-x to the screen. It will bead up at first, but continue to swirl it on for about 20-30 seconds until it starts drying to a uniform hazy coating
5. Wet your microfiber cloth again, getting it damp but not dripping and buff off most of the hazy coat
6. When you have most of the haze removed, switch to the dry end of the microfiber and buff off the rest.
7. Go back to the bright lights and multiple viewing angles to check for missed areas.
Good luck and share your results!"
-- This sounds like a great idea to me.

hmmm may have to try this

That is genius!

I've been doing this for years on nearly all my phones and laptops haven't had a issue yet! Also great to use on your sat dish doesn't help in the big storms but it does help.

Me thinks this is a repost...
http://forum.xda-developers.com/showthread.php?t=894197&highlight=rainx

Aquapel seems to be better than Rain-X (lasts a bit longer under heavy wiper usage). I haven't switched back once I tried it.
Wonder if it would also work in this aspect as well (possibly better too).

I made the mistake one time of confusing Aircraft canopy cleaner/polish for windshield cleaner. However, after 30 minutes of buffing, buffing, and buffing, for six months even the BUGS would slide off that glass. Hmmm, I wonder...

How does this effect the glare?

*Rain-X only sold in America

So, you'll always have Rain-X on your fingertip, getting aborbed into your body and transferred to the food you handle, the contact lenses you put in your eyes, etc?
Also, Rain-X can be a pain to get off once it's on, so doing this may make it almost impossible to put a screen protector on later.
I used to use Rain-X on my windshield until I noticed dangerous visibility problems at night when a streetlight or something would hit at an off-angle. The glare was horrible and I couldn't see a thing.

just did this to my nook and my evo. loving it! the sun is the only light source I haven't tested yet but so far it's SO much better!

Might have to try this on my Nook and my Evo.
*Runs to store to buy Rain X*

Original poster secretly buying up Rain-X's company shares.

Where do you buy this stuff? Do you have to mask the border off before applying?

GrillMouster said:
So, you'll always have Rain-X on your fingertip, getting aborbed into your body and transferred to the food you handle, the contact lenses you put in your eyes, etc?
Also, Rain-X can be a pain to get off once it's on, so doing this may make it almost impossible to put a screen protector on later.
I used to use Rain-X on my windshield until I noticed dangerous visibility problems at night when a streetlight or something would hit at an off-angle. The glare was horrible and I couldn't see a thing.
Click to expand...
Click to collapse
You make a solid point on the chemicals being absorbed... The stuff was never meant to be in constant contact of skin.
I also had very bad visibility at night after using the washer fluid type...

Although I haven't tried this, something else that may work, and maybe safer than Rain-X as far as chemical absorption is shaving cream. This is an old trick I used to do to prevent the bathroom mirror from fogging up when I took a hot shower. I'd smear shaving cream (not gel; it needs to be real shaving cream) on the pre-cleaned mirror. Spread it all around. Let it sit for a while, then buff it off with a cloth.

Wow this worked surprisingly well. I previously tried Klasse AIO (it's a cleaner wax for the car) on it, which made it nice and slippery, but didn't seem to last very long. Rain-X worked amazingly well and also fixed the phantom touch issue that I've been having while playing zenonia 2. I can finally play without turning off and on my screen every so often to fix it. Thanks!

I tried this last night.
I cleaned the screen twice with a lint-free cloth designed for eyeglasses. I used liquid eyeglass cleaner too. I applied the RainX then buffed and buffed until it was clean...
I dunno. It doesn't really appear to make *that* much of a difference. My skin is average in terms of oil.
Maybe I was expecting better results.
Perhaps I'll try the shaving cream approach. Which is better, lime, menthol, or regular? /snark

Jgrimoldy said:
I tried this last night.
I cleaned the screen twice with a lint-free cloth designed for eyeglasses. I used liquid eyeglass cleaner too. I applied the RainX then buffed and buffed until it was clean...
I dunno. It doesn't really appear to make *that* much of a difference. My skin is average in terms of oil.
Maybe I was expecting better results.
Click to expand...
Click to collapse
Just tried this too. I still see some streaking afterwards (although it has been reduced significantly). The biggest difference though seems to be that I can wipe off any streaks with my fingers(!) afterwards.
FYI - You can buy Rain-X outside of the US. I picked mine up at Canadian Tire in Canada.
As for this stuff being absorbed through the skin - perhaps. Although according to the bottle it is only flammable and an eye irritant, so absorbing isn't likely to cause too much harm. And I would hope people are washing their hands before putting in/taking out contacts. There are more serious things that are easily spread by touching your eyes than Rain-X!

GrillMouster said:
Although I haven't tried this, something else that may work, and maybe safer than Rain-X as far as chemical absorption is shaving cream. This is an old trick I used to do to prevent the bathroom mirror from fogging up when I took a hot shower. I'd smear shaving cream (not gel; it needs to be real shaving cream) on the pre-cleaned mirror. Spread it all around. Let it sit for a while, then buff it off with a cloth.
Click to expand...
Click to collapse
Yes! I use the same shaving cream trick on my bathroom mirror as well as my windshield. It keeps my windshield from fogging up and makes it slightly more resistant to fingerprints. So I'm thinking it would probably work well on the nook.

HOW TO: Install a screen protector on your Google Nexus 7 Tablet (Dry Application)

Hi Nexus 7 fans,
Here at caseen we produced a video on how to install screen protector onto your Nexus 7! We used our GLARESHATTER Anti-Glare Dry Protection system for this video. It should help with anyone needing help installing a screen protection system.
For most dry application using Japanese PET, any additional bubbles will go out in 24 hours. Be sure to keep a CLEAN space!
Here is the video:
Link to screen protector system used in this video is here: http://www.caseen.com/caseen-2x-Goo...Anti-Fingerprint-Screen-Protectors_p_278.html
I'll be happy to answer any questions you guys might have

That nice, but you did it wrong.. I guess its like an Oreo cookie everyone has there own way of eating them
I would have just pealed about an inch off the top then applied it and slowly and softly pushed down as I peeled of the rest..

Cel1084 said:
That nice, but you did it wrong.. I guess its like an Oreo cookie everyone has there own way of eating them
I would have just pealed about an inch off the top then applied it and slowly and softly pushed down as I peeled of the rest..
Click to expand...
Click to collapse
Thats another way to do it ;P Both great ways IMO. The only reason I don't like that way is that too many issue with people accidentally touching the sticky part, and thereby adding oil to the installation =(.
Expert Tip: Keep scotch tape ripped and ready to go to catch any dust that may fall on the sticky portion during installaion. =].

caseenBrandon said:
Thats another way to do it ;P Both great ways IMO. The only reason I don't like that way is that too many issue with people accidentally touching the sticky part, and thereby adding oil to the installation =(.
Expert Tip: Keep scotch tape ripped and ready to go to catch any dust that may fall on the sticky portion during installaion. =].
Click to expand...
Click to collapse
They should use undusted latex gloves, and If you have access to It a heppa cirtifed Cleanroom. You can gets those dispozable clean suit at
home depot for under 20 bucks too.

Cel1084 said:
They should use undusted latex gloves, and If you have access to It a heppa cirtifed Cleanroom. You can gets those dispozable clean suit at
home depot for under 20 bucks too.
Click to expand...
Click to collapse
Haha! You know, after doing Zagg twice, I actually thought about doing it like that. All gowned up, wearing powderfree gloves and working in a BSC.
No more Zagg for me.

I always get mine wet. Helps get it down and slide a little bit to align. Also allows you to also remove any bubbles easier then a dry apply. Yes I'm talking about a dry application. A little soap helps too to prevent fingerprints.
Yea like oreos.
Sent from my Nexus 7 using xda premium

That installation video was brutal. In my house if I turned the screen protector over like had done, it wouldve had at least 1 or 2 dust particles catch on it. The way i do it is to always try to start from the top, peel back maybe an inch worth of the 1st guard, and lay it as perfect as possible all while holding the protector downwards. Then work your way down gently, push out the leftover bubbles with a microfiber cloth and my fingernail. Lift and dab with tape when necessary if dust bubbles occur.
Sent from my Nexus 7 using Tapatalk 2

so how's the feel on this one (is there any grip while swiping)? is there any orange peel? and how well does it reduce fingerprint?

Lol once i go back to school ill have access to a real cleanroom, may have to buy a new screen protector for it. But imo that wasnt a very good installation guide seeing how there were still some noticeable bubbles. The technique was good but Thats whT people are trying to avoid haha
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

I usually ignore any dusts/bubbles at the beginning. Of course, it's nice not to get them, but my main concern at the start is lining it up properly so that it sits perfect on the screen. Once I get that sorted, I use scotch tape and lift up every corner and clean up from below (while wearing lab nitrile gloves). I've had perfect applications using this method, though it takes time. Heck, it took me an hour and a half to get it absolutely perfect and bubble/dust free application for my Galaxy Nexus! Only took about 20 minutes to get a perfect and clean application for the Nexus 7

For those wondering, any bubbles on the screen protector will "dry out" after 24 hours [Ours is now bubble free after 24 hours of waiting]. I can understand wanting to do more! The more techniques performed the better. Just be ready to multi-task =).
NoTnERb said:
so how's the feel on this one (is there any grip while swiping)? is there any orange peel? and how well does it reduce fingerprint?
Click to expand...
Click to collapse
As a dry system there will be no noticeable orange peel. Also this one is super smooth, and does not grip your finger at all.
You won't need to wipe your screen for 2 weeks or more guaranteed. Our GLARESHATTER system takes care of fingerprints extremely well!
We have great Amazon reviews for our Nook Color version: http://www.amazon.com/caseen-GLARES...ie=UTF8&qid=1344896005&sr=8-9&keywords=caseen
You will like the Nexus 7 one =].

Question Whitestone Dome - UV light more or less?

Installed the Whitestone dome and it came out perfect.
Just wondering if it makes any difference to use the curing light more than recommended?
Will too much UV light damage the adhesive or glass?
I've already done a few extra minutes.

Just don't look at it...

blackhawk said:
Just don't look at it...
Click to expand...
Click to collapse
I don't understand?

It's fine.
Short wavelength UV can damage your eyes... never look at it. Including the light reflected of objects illuminated by it.
Welder's flash is painful... think sand in your eyes.

The extra uv light will do nothing to the adhesive. The recommended ammount of uv blue light by White Stone is more then enough to make a great fit.

bartjeh1991 said:
The extra uv light will do nothing to the adhesive. The recommended ammount of uv blue light by White Stone is more then enough to make a great fit.
Click to expand...
Click to collapse
Their switches are cheap so sometimes the diode flickers. Overkill may be the best solution.
I'm not impressed with Whitestone at all. Their customer support is terrible and it's all off shore shipped and "supported". No phone support and rude, slow email support.
A wretched company to deal with, one of the worst.
Been there, done that... to hell with Whitestone.

Does the adhesive become stronger with more exposure time?
Super strong adhesive can be a problem in the future when you try to remove an old tempered glass screen protector.
I've heard horror stories where people have trouble with trying to chisel away at the old adhesive and glass mess. I wonder if their problem was over-curing the adhesive by using the light too long?
I went by the book for exposure curing time, and it was very easy to remove the cracked screen protector - even with a crack in it, I could still easily peel it off because the adhesive was willing to let go.
However, I've never tested this. But it just seems like the time limits are provided for a reason, and are not given in terms of "at least" but rather "for this long".

When it's cured it's cured. The polymerization is done. Under curing however would be an issue.
UV does degrade many materials over time but this isn't near a strong enough source and a few extra minutes is insignificant.
As the polymer adhesive ages it may degrade making removal more difficult than when it was first applied.
Personally I don't like this protector at all. It's a pain from start to finish including removal at times. My stupid cheap easy wet apply urethane screen protector has been on for over 9 months. It's kept the screen from being marred.
It's can be easily removed and is much easier to apply. Only $5 a pop. I still have 3 left because I never thought they be so easy to apply (expected to destroy one) and that even if the application went well it would only last 2 or months. Not.

I have the Whitestone Dome Glass on my s21U and got a chip on it yesterday and tried to take it off. It was a horror show and a large part of it stuck to the middle of the screen. I thought my phone was ruined. I had to take a hot hairdryer which softened the glue and slowly pick bits of it off. This is the first time I've ever had this happen after using many different UV protector on different phones! I did put a new one on but when I take this one off I'll be much more cautious to use a hairdryer and try and remove it all in one piece .

Batfink33 said:
I have the Whitestone Dome Glass on my s21U and got a chip on it yesterday and tried to take it off. It was a horror show and a large part of it stuck to the middle of the screen. I thought my phone was ruined. I had to take a hot hairdryer which softened the glue and slowly pick bits of it off. This is the first time I've ever had this happen after using many different UV protector on different phones! I did put a new one on but when I take this one off I'll be much more cautious to use a hairdryer and try and remove it all in one piece .
Click to expand...
Click to collapse
That's nasty.
How long was it on?
99% Isopropyl alcohol be worth a shot but probably be ineffective.
Be real careful when using heat guns. I've used them a lot for electronic assembly and things can heat up quick, too quick.
The display is literally tens of thousands of heat sensitive semiconductors.
My solution is to use a case with slightly raised guards around the whole display. The Zizo Bolt has protected my 10+ very well. The Gorilla IQ Sheild has done the rest to protect the screen. The screen is fairly robust but needs protection from scratches. Urethane does a surprisingly good job at this. It's self healing to a certain extent so it actually looks better after a night's rest in areas of high usage ie the keyboard. Rather strange to observe.

blackhawk said:
That's nasty.
How long was it on?
99% Isopropyl alcohol be worth a shot but probably be ineffective.
Be real careful when using heat guns. I've used them a lot for electronic assembly and things can heat up quick, too quick.
The display is literally tens of thousands of heat sensitive semiconductors.
My solution is to use a case with slightly raised guards around the whole display. The Zizo Bolt has protected my 10+ very well. The Gorilla IQ Sheild has done the rest to protect the screen. The screen is fairly robust but needs protection from scratches. Urethane does a surprisingly good job at this.
Click to expand...
Click to collapse
It was only on for 3 weeks. I maybe didn't remove it properly as I just tried to lift it off rather than put some card or something under it and prise it off but as I said, I've never had any problems like that before with UV glue protectors, they always usually easily come off.

Batfink33 said:
It was only on for 3 weeks. I maybe didn't remove it properly as I just tried to lift it off rather than put some card or something under it and prise it off but as I said, I've never had any problems like that before with UV glue protectors, they always usually easily come off.
Click to expand...
Click to collapse
The damage may have scored it leaving a weak spot.
Glass is a very strange substance; neither a true solid nor liquid. An amorphous solid.
It can behave in seemingly unpredictable ways. The Pascal's law applies to it. Glazer's can use this to their advantage to cut glass.