Please help, I think I bricked my phone :( - Touch Pro2, Tilt 2 Windows Mobile ROM Development

Sorry if I shouldn't be writing a new thread about this, but I couldn't find a thread about bad flashes...
I'm a newbie with this, and I think I just bricked my phone after only my second flash I have a Touch Pro 2 (T-Mobile), and I was able to successfully install HardSPL. I even flashed the EnergyROM LEO with no problems. After a few days of playing around, I tried to flash the AthineOS v2.0 ROM, and now my phone won't boot up... it gets stuck in the Touch Pro 2 black screen with the red lettered version numbers at the bottom. I tried rebooting and pulling the battery out, but I have had no success in being able to boot it back up.
Any ideas on how I can fix this? This sucks I've only had the thing for less than a month...

localcall001 said:
Sorry if I shouldn't be writing a new thread about this, but I couldn't find a thread about bad flashes...
I'm a newbie with this, and I think I just bricked my phone after only my second flash I have a Touch Pro 2 (T-Mobile), and I was able to successfully install HardSPL. I even flashed the EnergyROM LEO with no problems. After a few days of playing around, I tried to flash the AthineOS v2.0 ROM, and now my phone won't boot up... it gets stuck in the Touch Pro 2 black screen with the red lettered version numbers at the bottom. I tried rebooting and pulling the battery out, but I have had no success in being able to boot it back up.
Any ideas on how I can fix this? This sucks I've only had the thing for less than a month...
Click to expand...
Click to collapse
hi if you have done the hardspl then try this
to enter Bootloader
Remove the back cover from the phone.
Hold the Volume Down button.
Use the stylus to press the reset hole.
Or if the device was powered off, press the power button whilst holding down the Volume Down button.
you should see serial at the bottom of the three color screen then plug in the usb cable the serial should change to USB then just flash another rom.
i hope this helps you.

Thank you! Thank you! Thank you! Thank you! That worked! That's a really cool recovery feature from HardSPL... you guys really know what you're doing This is such a huge relief...

localcall001 said:
Thank you! Thank you! Thank you! Thank you! That worked! That's a really cool recovery feature from HardSPL... you guys really know what you're doing This is such a huge relief...
Click to expand...
Click to collapse
only to pleased to help I am glad you got your phone back working

localcall001 said:
Thank you! Thank you! Thank you! Thank you! That worked! That's a really cool recovery feature from HardSPL... you guys really know what you're doing This is such a huge relief...
Click to expand...
Click to collapse
hehehe finally you found solution.. but my rom does not have any problem.. somethings goes wrong

b16b said:
hehehe finally you found solution.. but my rom does not have any problem.. somethings goes wrong
Click to expand...
Click to collapse
idd, this is not ROM related, its just unlucky like hell. See the phone as a PC, where blocks need be written. If a block fails or is corrupt, you get these jokes. Its like a BSOD on a Windows PC.

I gotta admit it is great knowing that once you've done a hardspl you are safe as houses as even if you flashed the most currupted ROM, the bootloader will always allow a reflash.
This is way more stable and safe than any other experience I've had of phone flashing.

b16b said:
hehehe finally you found solution.. but my rom does not have any problem.. somethings goes wrong
Click to expand...
Click to collapse
Funny that, your latest ROM was the only one I had problems with - the same problems as the original poster, in fact. I flashed a different ROM fine, re-downloaded your 2.0 and flashed it again, same problem. Hanging on the boot screen.

b16b said:
hehehe finally you found solution.. but my rom does not have any problem.. somethings goes wrong
Click to expand...
Click to collapse
Probably I think I was just unlucky. My fear (while I was panicking) was that your ROM is European based, and since mine came from T-Mobile, it didn't mesh well. I also didn't unlock my phone so that could be also be a problem...

awesome community

localcall001 said:
That's a really cool recovery feature from HardSPL...
Click to expand...
Click to collapse
well..this is a normal recovery feature for stock spl also

Same Issue
I had the same issue with AthineOS v2.0 ROM it gets stuck on Touch Pro 2 logo

wahida76 said:
I had the same issue with AthineOS v2.0 ROM it gets stuck on Touch Pro 2 logo
Click to expand...
Click to collapse
no one have told me that on my thread... only here i found this issue.. and finally how pass the problem?

I had to re-flash a different ROM.
I'm wondering if it's related to the radio version...

what is your version of radio
can't you flash the latest 23060?
i use radio 3.36

I've used 4.49.25.05 and have just got the same result on 4.49.25.17
I'll try flashing 3.44.25.27 (the oldest in the radio thread) and re-flashing your ROM.

Alas, no luck with that one either.
I have no idea why it doesn't seem to work on my Rhodium :/

I'm sorry if I'm hijacking this thread but it's the only one I've found that's even close to having the same issue I have, though I'm still using the stock rom/os.
I was installing winmo msn messenger. It installed fine and reset my tp2 fine. It goes thru the tp2 splash screen, the verizon splash screen and the winmo splash screen. Then it shows owner information and this is where it gets screwed up. Owner info will stay up forever if I dont touch the screen. After touching the screen the only thing left will be the top bar and the rest of the screen stays black. The only things on the top bar are the signal icon (which always has an x), the wifi icon (which seems to be connected fine lol) and either owner info will still be in the upper left or the start menu will be there. Hitting the screen only causes my tp2 to beep.
Nothing I know how to do (which is basically just hard and soft resetting it) works. Verizon can't fix it (didnt think they would be able to) and I can find no drivers (possibly cause I'm still a noob with winmo) to resolve my issue. I'm not even sure how I'd get them on as it wont even sync up to my computer and my computer cannot find its hd. If I could get a rom for the verizon one I think I can figure it out from there with no issues...but htc website sends me to verizon website for support and vice versa. The htc wiki is the closest I've gotten to an answer...but no rom to download. The only OEM roms I can find anywhere aren't for this phone, unless one of those will work? You guys are the experts.
Does anyone know what I can try? Verizon wants me to return it but cannot tell me when I'll get my new one as they are out of stock...again. Please help lol! Thanks for any and all help.

Mr.Clark said:
I've used 4.49.25.05 and have just got the same result on 4.49.25.17
I'll try flashing 3.44.25.27 (the oldest in the radio thread) and re-flashing your ROM.
Click to expand...
Click to collapse
i using this..
*Change the radio to 3.46.25.30 (Hot Fix For GPS Lock)
and also try the latest release of my rom.. (maybe you have bad file bad download)

b16b said:
i using this..
*Change the radio to 3.46.25.30 (Hot Fix For GPS Lock)
and also try the latest release of my rom.. (maybe you have bad file bad download)
Click to expand...
Click to collapse
Sorry, I tried that one as well yesterday. And I've downloaded your ROM a few times too...
Are you still working on the 6.1 ROM? Maybe a new version will just magically start working for me...
EDIT: Tried a fresh 3.46.25.30 and a fresh download of your ROM. Still nothing

Related

Big Time Panic!!! Help please!!

I am not sure what I have done. I have a cingular 8125 G4. Downloaded the Risidioro g4 rom upgrade and my phone was not probably CID unlocked. Thought that did not matter cause I was able to install Mr Clean ROM couple of months back. I read some users in the forum who successfully upgraded from Mr Clean.
Everything went nice and smooth, the upgrade completed 100% and when it finished and rebooted it stopped at the blue, red screen and got stuck there. I did soft reset, hard reset but every time that blue, red screen comes up and gets stuck.
Has my phone become a "nice but dead piece of furniture" ? Oh! man..that would devastating!
Please help!
BigMonty
All right, no response yet but it is only a hour since I posted but for me it seems eternity already. I did something further reading and got some hope. My phone might not be dead yet. Somebody said, if I can get to the bootloader mode, I still have some hope.
I did some trick on hard resetting found here
http://forum.xda-developers.com/showthread.php?t=268836&highlight=dead
but to no avail.
Any other idea?? Cry!! Cry!! Cry!!!
Got another guy who successfully got out of the jail by having a SD image. Do you think it would work for me too? If it works where can I find it? I already e-mailed the guy, seems like a nice guy, let's see if he replies.
http://forum.xda-developers.com/showthread.php?t=274471&highlight=dead
Do you see a USB connection if you connect it to Active sync, normally it is showing in the lower left or right corner, I'm not sure.
If so, you should be able to re-flash again, best would be to do this with your previous installed ROM.
Btw,
Spl 2.25.0001
Ipl 2.25.0001
Can somebody suggest what would be most suitable ROM to go for once I am in the bootloader screen?
Vilem said:
Do you see a USB connection if you connect it to Active sync, normally it is showing in the lower left or right corner, I'm not sure.
If so, you should be able to re-flash again, best would be to do this with your previous installed ROM.
Click to expand...
Click to collapse
Thanks a lot Vilem for your reply. Yes I see a USB connection..but I guess we can't get to activesync because the OS did not load yet. I had the Mr Clean ROM installed and I tried to go for it but failed. What should I do now? Go for the original shipped Cingular ROM?Anybody knows which version it was and where can I find it?
bigmonty said:
I see a USB connection..
Click to expand...
Click to collapse
Means connected, try it. Mine crashed a couple of times like that and managed to get it going again.
You mean I should run the Mr Clean update utility which is the last successful ROM update or the orginial Cingular shipped ROM?
bigmonty said:
You mean I should run the Mr Clean update utility which is the last successful ROM update or the orginial Cingular shipped ROM?
Click to expand...
Click to collapse
try the last succesful.
bigmonty said:
All right, no response yet but it is only a hour since I posted but for me it seems eternity already. I did something further reading and got some hope. My phone might not be dead yet. Somebody said, if I can get to the bootloader mode, I still have some hope.
I did some trick on hard resetting found here
http://forum.xda-developers.com/showthread.php?t=268836&highlight=dead
but to no avail.
Any other idea?? Cry!! Cry!! Cry!!!
Click to expand...
Click to collapse
Bigmonty - after getting into allsorts of issues after trying to upgrade my G4 to various 3.2 based ROMS, i also got to the bootloader screen with the USB indicator in the righthand corner.
This worked for me - take the battery out for an hour or so, put back in and soft reset. make sure you have a good charge. reboot the PC and plug in the device.
Now the only ROM i can recover a working device from isto use the latest ROM from the phone supplier. in my case from the club i-mate site (my device is SIM unlocked).
hope it helps
Thanks AirWol. I was able to go back to Mr Clean successfully, which was a great relief. What I was doing wrong was, I was using the wrong update utility of Mr Clean. I should have used the one which was modified according to Risidioro guide for use in g4 chips. But I was using the original Mr Clean instead.
BTW, anybody knows whether it is possible to update g4 phones to the latest Risidioro or Cingular 2.26 ROMS? That is, can I modify according to Rididioro guide for use in g4? Anybody?
Probably I haven't learned enough lessons yet!

this concludes the beta test...

Hello all,
first, a big thanks to all the rom developers around. You transformed my Diamond in a usable and enjoyable tool.
What happened to me tonight is very frightening. In fact, I cannot believe what happened.
And this is the story: I was at a birthday party and later in the evening I checked my phone : it seemed to have frozen, so I rebooted it as I do sometimes when I have no other choice. But this time something strange happened : I got the following message "this concludes the beta test of this software release. thank you very much for your time and effort in helping make this a great product for our customers" - what the ... ? No way to make a call, the message is impossible to remove... completely blocked !!!
I don't remember exactly the rom I flashed last because I sometimes change. It might be a dutty's release (75%M sure) - anyway I was in a very bad situation because my wife wasn't feeling well and I couldn't call her without finally borrowing a phone from someone.
I will flash a new rom tomorrow and I hope that the message will disappear but I can tell you that it is a very strange feeling when suddenly your phone refuses to operate normally. It's a nightmare.
I hope that someone has an explanation for this because I don't want to go trough this situation ever again, it's just so annoying to have a phone which tells you "No you can't use me; your trial period has expired" when you need it he most.
Thank you for your opinions in advance
Have you tried a hard reset?
Yep same problem here.
Using duttys 1.93 - Can't get to his website either.
Hard rest does not work - had to reflash back to branded (Telstra) ROM
i'm having the exact problem right now, what can i do to fix this? someone told me to reflash it but how? i'm VERY new to the diamond
hardreset does not work
I bought the phone from a person so it's second hand. The seller did mention he updated the ROM, I'm assuming this is the cause of the problem? help please
thanks!
I am getting the exact same problem.I do not know what to do.
Sigh and since my computer will not sync, I cannot reflash it. Hard set is also a no go.
ya I cant sync it with my computer either... i'm searching other sections on this forum and I cant seem to find one that teaches you how to flash without syncing with the computer
OK i got it well kinda sorta. If you hard reset and just use the date taht dutty had then your phone will load. Do not correct the date and you should also change the date on your computer so that it wont sync. Then donwload his new rom or whatever rom you prefer and then flash it. Then change the dates back. It worked for me.
thanks.. do you have the link for the new rom?
I'm going to give it a try
The link it dutt'y new rom is here http://rapidshare.com/files/162091111/Ruu_Signed_duttys_diamond__V2.9_5_2_20275_RTM_Full_MSVC.zip
just a question how do you flash it?
can you help me? i'm very new to this phone
I had the same problem last night- expired beta software. If I do a hard reset I believe I will loose all the info on the phone, is that correct?
I was thinking that changing the date will work, is there another way to change the date without having to loose the info?
Someone has a reliable link to an instruction on how to flash the ROM?
I am also using throy 2.3, to find the latest release please go to WWW.DUTTYTHROY.NET
Any help appreciated.
!everyone! you can flash roms from bootloader. hold volume down and the little red reset button, keep holding vol down untill bootloader. at the tri color screen, run ruu from host pc. everything will be fine with this method. just like activesync.
ok i to change the time and stuff and it actually can sync using active sync.. however.. when tried to install HSPL 1.24 after the part where the phone will turn black.. i click on the DiamondCustomRUU as instructed
but it says this "The application failed to initialize properly (0xc0000135). CLick on OK to terminate the application"
Is there a way I can recover this without losing all that is on my phone?
Do anybody know the password for the latest ROM 2.9 from Dutty? His page is unavailable right now....
Duttys V2.9 RTM Finale
someone please tell me how to flash.. from scratch? i hard reset my phone.. and i cant get HSPL to work. When i install the activesync way, the black screen turns on then i cant open DiamondCustomRUU
if i do i the bootloader way, when i connect from the three colour screen it cant pick up the phone because it says i'm missing Qualcomm CDMA Technologies MSM
please help been stuck for hours already
i won't flash Duttys ROM again!!! Right now i need my phone and it doesn't work! And if i reflash it i lose my data....
never again!
its you have a problem with duttys rom
you need to use his thread to point out your problems....
not this one.

Problems with G-Sensor

Hey folks,
i got a htc touch diamond about a week now, and my g sensor doesnt work anymore.
Whenever i start teeter, the ball speeds over to the upper lefthand corner of the screen, and even the Hologram tool doesnt work.
When i try and install the calibration tool from the official htc site it sais that my htc g sensor is out of balance, even when i lay it on the table.
Whats wrong?
Can i fix it somehow?
Thanks in advance!!
/cry
BryanMarley said:
Hey folks,
i got a htc touch diamond about a week now, and my g sensor doesnt work anymore.
Whenever i start teeter, the ball speeds over to the upper lefthand corner of the screen, and even the Hologram tool doesnt work.
When i try and install the calibration tool from the official htc site it sais that my htc g sensor is out of balance, even when i lay it on the table.
Whats wrong?
Can i fix it somehow?
Thanks in advance!!
/cry
Click to expand...
Click to collapse
Have you tried calibrating g-sensor with g-sensor tool?
http://msmobiles.com/news.php/7666.html
Jura_ZG said:
Have you tried calibrating g-sensor with g-sensor tool?
http://msmobiles.com/news.php/7666.html
Click to expand...
Click to collapse
like i said in my first post:
When i try and install the calibration tool from the official htc site it sais that my htc g sensor is out of balance, even when i lay it on the table.
Click to expand...
Click to collapse
i did, and it still doesnt work..
when i let it calibrate, it does that standard animation thingy, and it jumps right back to '****ed up' state.
Which is not good is it now?
BryanMarley said:
like i said in my first post:
Click to expand...
Click to collapse
Sorry missed that one
BryanMarley said:
i did, and it still doesnt work..
when i let it calibrate, it does that standard animation thingy, and it jumps right back to '****ed up' state.
Which is not good is it now?
Click to expand...
Click to collapse
I guess its a hardware error then.
Jura_ZG said:
Sorry missed that one
I guess its a hardware error then.
Click to expand...
Click to collapse
what should i do then? cus i cant really fix hw do i ? haha
send it back for repair....
Hey, tryed Hard-Reset?
Have the same problem now (till some days without realizing it really...) and backup current system now.
Hope a hard reset helps.. me and you ;-)
BryanMarley said:
what should i do then? cus i cant really fix hw do i ? haha
Click to expand...
Click to collapse
Try HR and if that don't help i suppose sending it for repair is the only option you've got left.
hard reset doesnt work, already tried it, gonna send it to htc then. Do they mind i installed HardSPL?
DO NOT SEND IT BACK WITH A HARD SPL OR FLASHED ROM!!!
your warranty is voided when u flash a Hard SPL, so you have to flash back a official ROM and original SPL.
I have a Offical HTC Touch Diamond, and i wrote down the original details incase i needed to flash it back.
ROM: _HTC Touch Diamond_QMR_RUU_Diamond_HTC_WWE_1.93.405.1_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship.exe
SPL: Stock-Original_Diamond_SPL_1.37_Multi_Regional.zip
You can find both of these on this site.
mugglesquop said:
DO NOT SEND IT BACK WITH A HARD SPL OR FLASHED ROM!!!
your warranty is voided when u flash a Hard SPL, so you have to flash back a official ROM and original SPL.
I have a Offical HTC Touch Diamond, and i wrote down the original details incase i needed to flash it back.
ROM: _HTC Touch Diamond_QMR_RUU_Diamond_HTC_WWE_1.93.405.1_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship.exe
SPL: Stock-Original_Diamond_SPL_1.37_Multi_Regional.zip
You can find both of these on this site.
Click to expand...
Click to collapse
thanks for the heads up, but erh, i bought it at vodafone, and they have their own branded rom, is there anyway to get that one back?
Before sending it back I would try flashing a different ROM....I suspect the issue is ROM related (S/W) and not h/w....
PJ6363 said:
Before sending it back I would try flashing a different ROM....I suspect the issue is ROM related (S/W) and not h/w....
Click to expand...
Click to collapse
No, its no sw problem, tried different roms. Is it maybe an idea to flash back to original SPL and then reflashing it to HardSPL? maybe hardspl is causing this?
And where do i find the original vodafone rom? (NL) cus i cant seem to find it on the site.
Thanks.

Returning to Stock for repair! URGENT

Good Morning all,
Hope everyone is well. I realise that I am probably repeating a post somewhere and apologise profusely for that.
However my request is quite urgent. I have my phone flashed with Dutty's 4.1 using the step by step guide to update radio and ROM etc etc.
My touchscreen has now started playing silly buggars and as such tomorrow it gets picked up by UPS UK to disappear off to be looked at. Obviously I do not think they will take it to well if it still has duttys on there
So just so I make sure I get eveything right.... can someone just drop me a link to the correct files for a stock flash back to the way things should be.
Thank you thank you thank you thank you thank you thank you
Jody
To add an update, the boot loader screen shows:
BLAC100 32M
SPL-1.56.OliNex
Micro-Blackstone (LED) v6
Thought this might help in finding out how much work to stock?
I Think u need the original rom... or a htc one from the website?? ... can it not be downloaded from the htc website?? i may be wrong
I do but also need to make sure I do an original spl and radio as well
first off go to htc.com and download the romupgrade thats on that side (ive non is on the side check the wiki for youre countryrom)
then flash that one and se ive radio comes with it
ive not flash radio 13.**.**.**
then from the hard spl thread there a tut how t make youre spl stock again and youre finished
This is the last official ROM with 1.56 spl and 1.13 radio
h..p://rapidshare.com/files/231263089/-HTC_Touch_HD-MR_2009-RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.34_1.13.25.24_Ship.exe
Ok, thanks for all your assistance. Just qiuck one, Once I have done all this how can I check it has all worked. Obviously the boot loader shows the SPL, and the ROM is whatever installed. Where will it display the current radio so I can check that too?
J7ody said:
Ok, thanks for all your assistance. Just qiuck one, Once I have done all this how can I check it has all worked. Obviously the boot loader shows the SPL, and the ROM is whatever installed. Where will it display the current radio so I can check that too?
Click to expand...
Click to collapse
At boot it shows, just restart your device and look at the red text in the bottom right corner, there it will show your current radio version.
Could also see it in device info when the device is on but dunno if you still can considering you need to return it.
gl.
Thanks to all help, radio is now reading stock as is the 1.56 spl all installed from latest ROM from HTC so also stock.
UPS collect tomorrow and with any luck they will return a working touchscreen and I can continue where I left off
anyone noticed lots of these requests....? where they flash then the touch screen stops working?
wtf......
I noticed these threads after the 1.17 radio but some users haven't upgraded to that radio and it happend to them.
i'm looking to stay on my rom until something more is found out about this.....
Curious????
imranmaz said:
anyone noticed lots of these requests....? where they flash then the touch screen stops working?
wtf......
I noticed these threads after the 1.17 radio but some users haven't upgraded to that radio and it happend to them.
i'm looking to stay on my rom until something more is found out about this.....
Click to expand...
Click to collapse
I also have read a couple of these help requests and the same problem, but what could it be, is it the windows mobile 6.5 builds that are doing this (not blaming the chef's in anyway), or some conflict with the spl... have to investigate this more...
imranmaz said:
anyone noticed lots of these requests....? where they flash then the touch screen stops working?
wtf......
I noticed these threads after the 1.17 radio but some users haven't upgraded to that radio and it happend to them.
i'm looking to stay on my rom until something more is found out about this.....
Click to expand...
Click to collapse
I have also noticed the very same, after changing the rom people are having screen problems! Why is that?
Returning to Stock for repair! to having screen problems after changing the rom
J7ody said:
Good Morning all,
Hope everyone is well. I realise that I am probably repeating a post somewhere and apologise profusely for that.
However my request is quite urgent. I have my phone flashed with Dutty's 4.1 using the step by step guide to update radio and ROM etc etc.
My touchscreen has now started playing silly buggars and as such tomorrow it gets picked up by UPS UK to disappear off to be looked at. Obviously I do not think they will take it to well if it still has duttys on there
So just so I make sure I get eveything right.... can someone just drop me a link to the correct files for a stock flash back to the way things should be.
Thank you thank you thank you thank you thank you thank you
Jody
Click to expand...
Click to collapse
dataSaMm said:
I have also noticed the very same, after changing the rom people are having screen problems! Why is that?
Click to expand...
Click to collapse
Hi, can someone (Admin) change the title of this thread from Returning to Stock for repair! to Having screen problems after changing the rom?
I think the first is solved and now we have this new problem in hand.
best regards
+1
i've had the problem with a cooked french rom (Pyrana V17C). My screen started to freeze for a few seconds. During that time, when I put the finger on the screen and slide, the screen follows the move but it comes back to where it first was, ant the move is finally not taken in consideration ... it looks like the screen is an elastic...
So it did it sometimes and it lasted a few seconds first, and then, a couple af days later, it was more often, and I had to soft reset everytime, and yesterday, I finally had to hard reset to take back the hand, and the bug came back more quickly. So I installed the latest release of this rom this morning and everything seems to be stable since a couple of hour. If it comes back I'll try another rom, but if someone can find a way to set this, that would be perfect ...
J7ody said:
Thanks to all help, radio is now reading stock as is the 1.56 spl all installed from latest ROM from HTC so also stock.
UPS collect tomorrow and with any luck they will return a working touchscreen and I can continue where I left off
Click to expand...
Click to collapse
You've found your solution to original query and returned device to stock rom & SPL. Thread has now run its purpose
Thread closed

HTC HD radio not turn on to acess network plz help me

hi,
i got oner htc hd i hard spl it and the upgrade it to windows 6.5 all was working fine but it hangs a lot the i flashed it with windows 6.1 rom then the problem came was that all is working fine but i am unable to turn phone on to acess network on phone then i updated it ti the same rom i firstly used the problem was same then i update its radio then also problem was not solved then i update it other 6.5 rom but the problem is same phone doesnt turn on so that i cant acess network plz help me its very urgent for me
Are you sure the hspl update was successful? What spl version is currently showing on your device?
yes hspl was successful
manbir said:
yes hspl was successful
Click to expand...
Click to collapse
What spl is showing?
manbir said:
hi,
i got oner htc hd i hard spl it and the upgrade it to windows 6.5 all was working fine but it hangs a lot the i flashed it with windows 6.1 rom then the problem came was that all is working fine but i am unable to turn phone on to acess network on phone then i updated it ti the same rom i firstly used the problem was same then i update its radio then also problem was not solved then i update it other 6.5 rom but the problem is same phone doesnt turn on so that i cant acess network plz help me its very urgent for me
Click to expand...
Click to collapse
Perhaps you could give a bit more information about your issue. Interesting would be:
do you get the window to enter your pin?
and do you get any error message?
Matthes42 said:
Perhaps you could give a bit more information about your issue. Interesting would be:
do you get the window to enter your pin?
and do you get any error message?
Click to expand...
Click to collapse
i dont get any error and it is also not asking for any pin
its hspl is 1.56 olinex
Ok, so you have the right spl, so that is not the problem. To understand you, you say that you can not activate the phone? Does the phone stay in flight mode? If you go to Settings (Manila tab)\Wireless Controls and turn the Phone slider on, does it turn itself off again?
You can try to run the setup again. Go to Start\Settings (All Settings)\Connections\Connection Setup and make sure your Country and Operator are correct and press Ok to setup.
ClydeB1 said:
Ok, so you have the right spl, so that is not the problem. To understand you, you say that you can not activate the phone? Does the phone stay in flight mode? If you go to Settings (Manila tab)\Wireless Controls and turn the Phone slider on, does it turn itself off again?
You can try to run the setup again. Go to Start\Settings (All Settings)\Connections\Connection Setup and make sure your Country and Operator are correct and press Ok to setup.
Click to expand...
Click to collapse
am unable to turn the phone on rest all settings of country operator also ok
Is your device perhaps not SIM locked? What rom did you have originally? Have you tried to reflash to that original version and see if the problem is resolved.
When you first flashed to the 6.5 rom did the phone work then? I know you say you had lots of freezes, but before that did the phone work on the 6.5 rom?
sounds to me like a providerlocked phone
as he stated in his first post that he also flashed back 6.1
miniterror said:
sounds to me like a providerlocked phone
as he stated in his first post that he also flashed back 6.1
Click to expand...
Click to collapse
yes i flashed back to 6.1 but phone is not provide locked its phone is not turning on and i have cheked that all sims were working fine
miniterror said:
sounds to me like a providerlocked phone
as he stated in his first post that he also flashed back 6.1
Click to expand...
Click to collapse
manbir said:
yes i flashed back to 6.1 but phone is not provide locked its phone is not turning on and i have cheked that all sims were working fine
Click to expand...
Click to collapse
Thanks I saw that you did try a 6.1 rom, but I was asking if you tried the initial original 6.1 rom. You may have tried another 6.1 rom but not the original rom that was on the phone before you started flashing.
To my other questions then, did the phone initially work when you first flashed to the 6.5 rom? If after all of this and it was initially working on the 6.5 rom, you may have a hardware problem and may need to flash back to the original rom and take it back to HTC for a service.
ClydeB1 said:
Thanks I saw that you did try a 6.1 rom, but I was asking if you tried the initial original 6.1 rom. You may have tried another 6.1 rom but not the original rom that was on the phone before you started flashing.
To my other questions then, did the phone initially work when you first flashed to the 6.5 rom? If after all of this and it was initially working on the 6.5 rom, you may have a hardware problem and may need to flash back to the original rom and take it back to HTC for a service.
Click to expand...
Click to collapse
yes the phone was working fine when i firstly flashed to 6.5 rom and its not hardware how can i know which was original rom now at this condition???
manbir said:
yes the phone was working fine when i firstly flashed to 6.5 rom and its not hardware how can i know which was original rom now at this condition???
Click to expand...
Click to collapse
You can try going to the HTC website for your county and look to see if there is a rom upgrade available. If so you can enter your Serial Number to see if you can access it for download. Alternatively you can look for a stock rom here Try and find a friend near you with the HD and check their version.
Same problem here .....my wifi cant connect to anything..when im tryin to turn it on nothings happen and cant acces to web browsing..nothing works...i have flahed 4 roms till now and all the rom had the same problem...i ve flashed miris rom NRG rom Dutty rom and maryone....i dont know what to do....till before a week worked like a charm...but now it is still dead....
If your wi-fi was working and then on the same rom has suddenly stopped working that probably sounds like a hardware issue. You may need to flash back to rom and return the device for a service.
are you serious??cause in my country i leave in greece salonica..and the htc center is in athens and must send the device there and they told me to wait about one month or two to get it back....no way...!!!!but it is very strange...when i had miris rom it worked like a charm..after trying to flash a new rom to nrg then wifi stopped workin...tryed to flash another rom like duttys and maryone and still the same....why am i so unlucky???is there any solution???maybe is that any problem with rom?or misiing some file?
anyway thanks for reply....have a nice and a happy new year...god bless you!!
pm...sorry for my english...
edangel said:
are you serious??cause in my country i leave in greece salonica..and the htc center is in athens and must send the device there and they told me to wait about one month or two to get it back....no way...!!!!but it is very strange...when i had miris rom it worked like a charm..after trying to flash a new rom to nrg then wifi stopped workin...tryed to flash another rom like duttys and maryone and still the same....why am i so unlucky???is there any solution???maybe is that any problem with rom?or misiing some file?
anyway thanks for reply....have a nice and a happy new year...god bless you!!
pm...sorry for my english...
Click to expand...
Click to collapse
You can always try going back to the miri rom you were using, or to the original rom that was on the phone. If wi-fi still does not work then it sounds like it is a hardware issue and there is no other way around it that I can see but to take it in for a service, unless you think you can replace the part yourself. Is there no cell phone repair services in your location, although you may need to pay to have it repaired then as it will not be under HTC warranty then if you are prepared to take that chance. Sometimes these parts just break, it doesn't happen all the time, but hey even multi-million $ F1 cars break down.
ClydeB1 said:
You can always try going back to the miri rom you were using, or to the original rom that was on the phone. If wi-fi still does not work then it sounds like it is a hardware issue and there is no other way around it that I can see but to take it in for a service, unless you think you can replace the part yourself. Is there no cell phone repair services in your location, although you may need to pay to have it repaired then as it will not be under HTC warranty then if you are prepared to take that chance. Sometimes these parts just break, it doesn't happen all the time, but hey even multi-million $ F1 cars break down.
Click to expand...
Click to collapse
SO...FOR MANY HOURS TO FIND SOMETHING I MADE IT...THE SOLUTION IS UNDER START SETTINGS CONNECTION ADVANCED NETWORK AND THEN I JUST ENABLE FROM HSDPA/HSUPA TO ONLY HSDPA AND NOW ITS WORKING...
AS I THOUGHT THIS SETTINGS DEPENDS OF WHAT MODEM ROUTER YOU HAVE...JUST WORKING FINE NOW.....
SO EVEN MULTI MILLION F1 CAN BE FIXED UP......if you are rich and got the money...hahahaha
SO THANKS ANYWAY!!!!!!!!I AM GLAD FOR TRYING TO HELP ME.....
edangel said:
SO...FOR MANY HOURS TO FIND SOMETHING I MADE IT...THE SOLUTION IS UNDER START SETTINGS CONNECTION ADVANCED NETWORK AND THEN I JUST ENABLE FROM HSDPA/HSUPA TO ONLY HSDPA AND NOW ITS WORKING...
AS I THOUGHT THIS SETTINGS DEPENDS OF WHAT MODEM ROUTER YOU HAVE...JUST WORKING FINE NOW.....
SO EVEN MULTI MILLION F1 CAN BE FIXED UP......if you are rich and got the money...hahahaha
SO THANKS ANYWAY!!!!!!!!I AM GLAD FOR TRYING TO HELP ME.....
Click to expand...
Click to collapse
Hey, I'm glad you got it sorted. I'll remember to add that additional check to my little arsenal of things for troubleshooting. Thanks for the feedback.

Categories

Resources