Hi mates i have DIAM100 to unlock its from FRACNCE ORANGE network i need to unlock this phone and after i need to update with english rom bcoz this phone with french language here this pho9ne software details
DIAM100 64M
SPL-1.93.0000
MicroP-Diam (LED) V11
PSOC_Diam STAGE_PVT v0*32
please any body help me to unlock this phone stepby step
THANKS
There is only one way to do it and finding the files is a *****, I saved them PM me your email and I'll send them. It involves flashing your radio to a older one and then applying a fix. I don't know if you can then upgraded to a new radio without it locking again. Worked fine on two 100's I tried.
Related
Help!
I've gotten a diamond that will not let the rom be changed... When trying it says that the device id is wrong... So I booted it up in bootloader to find out which id it has and it just says:
MFG 64M
SPL-1.40.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x30
Anyone have some idea how to change the ID so I can install another ROM?
Regards,
Xanh
changes are the rom you are installing hasn;t been "signed" by olinex what rom is it? failing that try thier dev hardspl rather the the hardspl you have installed
when I try to install that one (Unsigned-Hard-SPL-Diamond-OliNex), it still says that my device id is wrong after uploading to 100%...
After that the spl hasn't been changed in the bootloader screen...??
I wasn't trying to upload anything yet (ROM).. I wanted to sim unlock it, and uploaded the 1.40-OliNex to the phone... that's when everything started.... But my phone never told me it was locked, only no service when putting a sim card in...
When I install the RUU_Signed_1_93OliNex_HSPL_UnsignedEdition, then I get vertical lines in the screen and it doesn't do anything anymore... so then i can only reset... Or it uploads to 100% and says invalid ID...
Anyone have an idea?
I can remember that my old qtec 2020i had a no-id update utility.. But that doesn't work on the diamond...
there are instructions to flash from bootloader somewhere... try that.
get ur device into Bootloader, then try flashing baisically.
Isn't that what i'm doing when I use diamondcustomruu to flash the device? because it sets it into boot loader and tries to upload.. or is there another way to flash?...
In the device i can see that it is a diam 100, but when i look into bootloader it doesn't say anything about that.. Probably that's why i get the ID error...
Because of this I cannot upload the developers edition spl...
My bootloader is
64M
SPL-1.93.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x30
i can't flash rom and spl (olipro-original)
Please help!!!
Hello, I need some help, I tried to upgrade to the latest factory rom ( Diamond_MRII_RUU_Diamond_HTC_WWE-ME_2.03.456.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship.exe ) which I downloaded from the HTC site.
The previous rom on my diamond was the previous factory release. Before that, the phone had originally been given to me by a stupid shop in Greece wearing that hacked Swtos greek version.
I run the setup, the phone restarted, the progress bar went all the way up to 100% and the i got "error 270" the communication has been interrupted.
Now the phone stays in bootloader mode (the red-green-blue-white stripes that's what it is right?) and it displays:
DIAM100 MFG 64m
spl-1.40.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
Upgrade ROM code error
Please Try again
Any suggestions?
Thank you in advance!
Hello. Iam a owner of an htc diamond. when i use the htc unlocking software i get this error: ERROR 262
this error happens at step 2 (flashing radio) i get always and error at 95% of process: ERROR
with the following details in the coloured screen:
DIAM 64M
SPL - 1.24. HARD
MicroP-Diam (LED) v11
PSOC - Diam STAGE_PVT v0x30
Upgrade Rom code error
Please try again
also. when i start flashing, it says Image from: 1.97.163.4 TO 1.20 Olinex
what can i do? i always got success unlocking htc diamond? what is the problem with this one?
thanks
try using a differnet hard spl. Try the one in my sig.
solved!!
http://forum.xda-developers.com/showthread.php?p=4884646#post4884646
Hi,
I am to flash my friends Blackstone, he bought it in china (were he lives) and his SPL number doesn't match anything what I get on the prompt is the following:
BLAC100 32M
SPL-1.19.0000
MicroP-BlackStone (LED) v6
When I search SPL-1.19.0000 it shows up an Elfin Hard-SPL releaser. Could this phone have been flashed and locked as an Elfin?
I am not familiar with this phone so I don't want to brick it, I was wondering which HSPL I should use in order to unlock. With google translate I think I can find a rom to flash with chinese text. Thanks in advance.
KW TP said:
Hi,
I am to flash my friends Blackstone, he bought it in china (were he lives) and his SPL number doesn't match anything what I get on the prompt is the following:
BLAC100 32M
SPL-1.19.0000
MicroP-BlackStone (LED) v6
When I search SPL-1.19.0000 it shows up an Elfin Hard-SPL releaser. Could this phone have been flashed and locked as an Elfin?
I am not familiar with this phone so I don't want to brick it, I was wondering which HSPL I should use in order to unlock. With google translate I think I can find a rom to flash with chinese text. Thanks in advance.
Click to expand...
Click to collapse
If your query is regarding HSPL, it should really be posted in the HSPL thread, no need for another thread.
To answer your query, you can use either HSPL 1.14 or HSPL 1.56, booth should work but it all depends on what rom you are going to flash. Any rom based on pre 1.56 should use HSPL 1.14 and any rom based on 1.54+ should use HSPL 1.56
unlock my diamond with HTC UNLOCKS.COM ALL WENT WELL WITH THAT AND I INSTALLED OMJ ROM AND ALL IT DOES IS STAY IN THE SMART MOBILITY SCREEN WAS ABLE TO GET IT TOO THE BOOTLOAD SCREEN OR TRI COLOR SCREEN BUT UN ABLE TO LOAD ANOTHER ROM THE BOOTLOAD SCREEN SAYS THIS SPL 135.0000 DIAM100 mfg 64M micro p - diam (led) V11 psoc- Diam stage_pvt vox30 and that all need help with this please any body dont want to thow it away htc p3700 unlock
Hey, go on http://www.htc.com/wwe and go to Support, select Touch Diamond, and install an Official ROM update. Cheers.
~codeslicer