Database Develop

Help! No device ID problem

Help!
I've gotten a diamond that will not let the rom be changed... When trying it says that the device id is wrong... So I booted it up in bootloader to find out which id it has and it just says:
MFG 64M
SPL-1.40.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x30
Anyone have some idea how to change the ID so I can install another ROM?
Regards,
Xanh

changes are the rom you are installing hasn;t been "signed" by olinex what rom is it? failing that try thier dev hardspl rather the the hardspl you have installed

when I try to install that one (Unsigned-Hard-SPL-Diamond-OliNex), it still says that my device id is wrong after uploading to 100%...
After that the spl hasn't been changed in the bootloader screen...??
I wasn't trying to upload anything yet (ROM).. I wanted to sim unlock it, and uploaded the 1.40-OliNex to the phone... that's when everything started.... But my phone never told me it was locked, only no service when putting a sim card in...
When I install the RUU_Signed_1_93OliNex_HSPL_UnsignedEdition, then I get vertical lines in the screen and it doesn't do anything anymore... so then i can only reset... Or it uploads to 100% and says invalid ID...

Anyone have an idea?
I can remember that my old qtec 2020i had a no-id update utility.. But that doesn't work on the diamond...

there are instructions to flash from bootloader somewhere... try that.
get ur device into Bootloader, then try flashing baisically.

Isn't that what i'm doing when I use diamondcustomruu to flash the device? because it sets it into boot loader and tries to upload.. or is there another way to flash?...
In the device i can see that it is a diam 100, but when i look into bootloader it doesn't say anything about that.. Probably that's why i get the ID error...
Because of this I cannot upload the developers edition spl...

My bootloader is
64M
SPL-1.93.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x30
i can't flash rom and spl (olipro-original)
Please help!!!

Have i killed it?

Hello, I need some help, I tried to upgrade to the latest factory rom ( Diamond_MRII_RUU_Diamond_HTC_WWE-ME_2.03.456.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship.exe ) which I downloaded from the HTC site.
The previous rom on my diamond was the previous factory release. Before that, the phone had originally been given to me by a stupid shop in Greece wearing that hacked Swtos greek version.
I run the setup, the phone restarted, the progress bar went all the way up to 100% and the i got "error 270" the communication has been interrupted.
Now the phone stays in bootloader mode (the red-green-blue-white stripes that's what it is right?) and it displays:
DIAM100 MFG 64m
spl-1.40.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
Upgrade ROM code error
Please Try again
Any suggestions?
Thank you in advance!

ROM Update Error

Hi Guys,
Im hoping someone here can help me out with my HTC Touch Diamond.
Had a few issues with the phone so was told my service provider Orange to carry out a ROM upgrade.
Went on their website and got the ROM update. Link to the file if it's any use.
http://www.orange.co.uk/diamond/RUU_...25.05_Ship.exe.
Followed all the on screen instructions such as making sure the phone's unlocked, 50% battery ect..
About 5 minutes into the update at 22% the update stopped and error code 302 came up. It gave me on screen instructions on what to do next so I followed all the steps again but the ROM update failed again.
I am now stuck with the Red, Green and Blue screen with yellow writing.
The screen displays:
DIAM100 64M
SPL.-1.93. 0000
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
Upgrade ROM code error Please try again
The upgrade ROM link was provided by both HTC and Orange.
Can this phone be repaired?
Thanks.

Diam100 unlock help

Hi mates i have DIAM100 to unlock its from FRACNCE ORANGE network i need to unlock this phone and after i need to update with english rom bcoz this phone with french language here this pho9ne software details
DIAM100 64M
SPL-1.93.0000
MicroP-Diam (LED) V11
PSOC_Diam STAGE_PVT v0*32
please any body help me to unlock this phone stepby step
THANKS

There is only one way to do it and finding the files is a *****, I saved them PM me your email and I'll send them. It involves flashing your radio to a older one and then applying a fix. I don't know if you can then upgraded to a new radio without it locking again. Worked fine on two 100's I tried.

Diamond Problem, please help!

Hy,
to all the helpers that post a message to help me.
I have a Touch Diamond (GSM) and it had this configuration:
WINDOWS MOBILE 6.1 PROFESSIONAL
CE OS 5.2.19965 ( BUILD 19965.1.2.3 )
2008
ROM VERSION : 1.93.479.3 WWE
ROM DATE : 07/25/08
RADIO VERSION : 1.00.25.05
PROTOCOL VERSION: 52.29.25.12W
ORIGINAL BOOTLOADER :
DIAM100 MFG 64M
SPL-1.40.OLINEX
MICROP-DIAM (LED) V11
SPOC-DIAM STAGE_PVT V0X30
I flashed 1.93 olinex from pc, and Gen.Y D2 R5.5 WWE-ROM (GSM)from internal
storage , after a few days I started to notice that my battery(1800) won't last more than a day and when I connect to pc using Disk Drive and try to copy a file in the internal storage(4 Gb) I reiceive an error and try again.
So I looked at the bootloader screen and noticed this:
DIAM100 64M (MFG-MISSING)
SPL-1.93 OLINEX
MICROP-DIAM (LED) V11
SPOC-WRONG PLATFORM V0X0 (???)
And from there I tried to change it back to stock - original rom,radio,bootloader,etc
But no effect.
I tried to write even with MTTY- no succes
Changed the Hspl version to:
DIAM100 MFG 64M
SPL-1.30.OLINEX
MICROP-DIAM (LED) V11
SPOC-WRONG PLATFORM V0X0
-(signed, unsigned-and many other hspl sign,unsigned)-no succes
Can anyone tell me what is wrong and how to fix?
Thank you for your time and help.