hello
I have a problem and hope someone could help me
I have TT7 on my HTC TyTN2 Kaiser, no problem
but gps works only if I put the phone on.
If I put off phone , wifi, BT, the program works but gps cannot fix any signal (gps is detected but do not fix signal)
Is there something to add or modify to have this working when I put off phone, wifi, BT (airplane mode)
thanks
nbnserge said:
hello
I have a problem and hope someone could help me
I have TT7 on my HTC TyTN2 Kaiser, no problem
but gps works only if I put the phone on.
If I put off phone , wifi, BT, the program works but gps cannot fix any signal (gps is detected but do not fix signal)
Is there something to add or modify to have this working when I put off phone, wifi, BT (airplane mode)
thanks
Click to expand...
Click to collapse
Workaround :
- enable phone from comm manager
- set a password for your phone
- launch the phone app, it twill ask for your password, don’t enter anything, just close the phone app
- launch TT and it should get the signal fix.
Related
hi
i've upgraded to helmi's latest rom.
however, my wifi strength seems to be hovering ard 35-40% mark when i am near my router... any fix i can download?
thanks
dericion said:
hi
i've upgraded to helmi's latest rom.
however, my wifi strength seems to be hovering ard 35-40% mark when i am near my router... any fix i can download?
thanks
Click to expand...
Click to collapse
Is the connection dropping out?
If the connection is working fine at the required radius, don't let what the meter says concern you.
wifi
the signal did drop out when i am out of my study room where my router sits.
it used to still connect the wifi.
any help?
Sounds obvious, but have you any new electrical equipment that may be causing interference??
This was happening to me if I tried and use wifi in the Kitchen, because of the fridge!!
I used sktools to change to G mode compatibility and it stopped.. Could just be a fluke though!!
wifi
hi all
tried that but the signal still the same
wifi - wlan problem
Hi,
i've updated my VPA III (BlueAngel) with Xplode's latest R4 image. It's a very nice work xplode!
But I can't turn my wifi on. If I go to the wireless and turn on wifi like discribed in the other threads i can see the left green led (for wifi) blinking like wifi is switched on but the software says still wifi is turned off. it also doesn't work in the comm manager.
thanks
Ebo
i will describe more specific the wifi turning on procedure(you should perform it once after boot, and then use comm manager until reboot):
1. turn on wifi trough wireless manager, it turns on and the turns off by itself
2. turn on wifi from comm manager, now you can control it from comm mnager, enable disable
thank you for the datail infos but I also tried this before and whatever I try nothing helps. It keeps like I described it:
when i do your first step
1. turn on wifi trough wireless manager, it turns on and the turns off by itself
---> the left green hardware led beginns to blink like wifi is physically enabled
but i can't get any access to it and the wireless item on the today screen says still "Wi-Fi: Unavailable"
and the secon step
2. turn on wifi from comm manager, now you can control it from comm mnager, enable disable
-->seems to has simply no effect
before with an older helmi and the original vodaphone software i also had some promblems like sometimes i had to do a soft reset before i could use wlan
is there any way to debug it like a log file or this KITL!?
i also tried a new software update and I cleaned the registry hive and i've formated the storage
@xploe i use your latest release xplode R4 lazy release and at the boot screen appears
R 1.15.00
D 1337.45
G 5.35.04.WWE
dericion said:
hi
i've upgraded to helmi's latest rom.
however, my wifi strength seems to be hovering ard 35-40% mark when i am near my router... any fix i can download?
thanks
Click to expand...
Click to collapse
Can I ask did u notice this problem before you upgraded & were hoping to solve it via upgrade?.
If your wifi board is on its way out or the antenna has taken one blow two many and let go. No amount of flashing could help.
Did the problem only arise after flashing?.
my T-Wings give me WIFI problums coz i always Conact WIFI network on my work place but mostly time wifi show its conncted but not working .. but after reset some time its work or some time not
some1 know whtz wrong ?
maliks said:
my T-Wings give me WIFI problums coz i always Conact WIFI network on my work place but mostly time wifi show its conncted but not working .. but after reset some time its work or some time not
some1 know whtz wrong ?
Click to expand...
Click to collapse
have you tried accessing any other wifi connection outside of your workplace ? does it give you the same problem ?
Wifi problums
yes but i didnt face problum other places but on work place its working befor fine
problem with T MOBLE WING
I have the same problem , I even did try connect to my home Wifi it show connected ,but doesn't open to the website I want to ,can some one help,thanks
I had the same problem, I installed batterystatus, and checked the option to disable gprs when wlan is on, and now it works fine...
You don't need batterystatus to do this (the software just does it automatically for you), you can do it by yourself by disabling "data connection" in the connection manager whenever you turn on the wifi radio
-Hope it helps
t-mobile wing wifi problems
I had a similar problem with my wing. It would connect to unsecured WIFI networks and work flawlessly but when I connect to a secured network it would work for about 1 min then just hang while downloading a web page. If you device is doing this send it back to t-mobile and get a new one. This is what I had to do. hopefully you have a warranty.
I just got my T-Mobile Wing and I think I have the same problem. It just doesn't want to work with my WPA-secured Wi-Fi. When I switch WPA off, it works fine.
Did anyone else had a problem like this?
Called T-Mobile, they have nothing like that in their knowledge base.
I got this problem when i installed HTC 10 Button comm manager. I uninstalled it and WiFi works again.
Hope this helps
i have somewht of a similar problem, since ive had my Wing i have been unable to use my wi-fi, when i turn it on it says connected and shows me the lil meter and everythin but when i try browsing or downloadin it just hangs and does nothing until i turn the wi-fi off...i have no clue why i have learned to live without it but would appreciate any help...thanks
Try this it work for me. Whenever you want to connect to secure wpa do this before you make the connection
Start > Setting > Connections > Wifi Status > Power Mode > Move the slide "Best Performance"
Your wing should be able to connect to secure wpa.
Hope this help.
timace said:
i have somewht of a similar problem, since ive had my Wing i have been unable to use my wi-fi, when i turn it on it says connected and shows me the lil meter and everythin but when i try browsing or downloadin it just hangs and does nothing until i turn the wi-fi off...i have no clue why i have learned to live without it but would appreciate any help...thanks
Click to expand...
Click to collapse
Make sure you disconnect from edge/gprs before you try to surf after you are connected to the wifi.
ivanmmj said:
Make sure you disconnect from edge/gprs before you try to surf after you are connected to the wifi.
Click to expand...
Click to collapse
how exactly do i do this? is it what was explained about in the battery status menu and check marking the box 'disable proxy for wi-fi'...?
You can click on the little E or G on top and click on Disconnect.
ivanmmj said:
You can click on the little E or G on top and click on Disconnect.
Click to expand...
Click to collapse
i dont know how i ever survived without wi-fi....WOW....thank u
Thank Ayodeji13. He answered this in the 5th post. ^_^ But, yea, I've done the same thing before and was lucky to realize where the problem was coming from. Unfortunately, it didn't help me with the crappy wifi signal that my Wizard provided me. The wing, on the other hand, is MUCH better at this.
joking said:
Try this it work for me. Whenever you want to connect to secure wpa do this before you make the connection
Start > Setting > Connections > Wifi Status > Power Mode > Move the slide "Best Performance"
Your wing should be able to connect to secure wpa.
Hope this help.
Click to expand...
Click to collapse
Thanks mate... I too was having issues connecting to wifi... its kind of strange... it was connecting to my home network for sometime but later it suddenly stopped. It will connect to other networks but not to my secured network. Today I tried the setting you mentioned and surprisingly my phone connected to my home network... I wonder why because this setting should improve the performance and not the connectivity itself... Thanks again
you can add me to the list of people with wifi issues. I can't connect to my wireless router and I'm stand two feet away from it. It shows up but when I try to connect it says unavailable. I've done everything from turning the data off, to setting the power to best performance but it won't connect.
I need help... Whenever I connect it says I'm connected but actually I'm not. Yesterday I could view directions using live search but couldnt browse the web, not i cant do both. it gets stuck on the locating... part of loading the website. sometimes it gets to opening but the KB bar doesnt come up and it gives me some 500 internal error, or page doesn't exist. I cant do the best performance thing because im using touch it 2.3 rom and i dont have wifi status anymore.
WHY DO YOU HAVE TO REMOVE THAT STUF?!! URGH! I dont even have msn!
But anyways, can someone help me connect to the internet?...
TRY THIS
I have the same problem, i i manage to fix my wifi connectivity by editing the registry.....try this at your own risk.....but swear it works for me. i used total commander to edit registry and go to:
HKEY_LOCAL_MACHINE > SOFTWARE > HTC > Comm Manager >
then you will see folders 0 - 8 or some only have 0 - 7 ,delete folders 6 and up ........ ( I JUST MOVE MINE instead of DELETING IT< I MOVE IT TO STORAGE CARD SO IF SOMETHIN GOFF UP I CAN JUST PUT IT BACK )....
SOFT RESET then try turn your wifi ON , connect to your network.... til me if this works for u guys...
i think the value of those folders are bum hehehehe thats why it wont connect......., after connecting to your wifi secured or not , it will create another folder and add those folders back by default...but this time the good settings lolz its worth a try !
Ok this is realy frustrating. My wing was getting on my secured home network and npw it dose not. I read all the post and have tried some (the ones that I could understand). I dont have the option under battery status to disable gspr or gpsr. And my system is vista 64 so total commder dosen seem to work for reg settings(edits). I can conect to unsecure networks but I cant to my hone (secure) network. I have in the past but it dsent ssem to work now?
I have two questions really..
I live in the Netherlands and have an always-on internet subscription... but when I travel abroad I want to do the following:
1) Turn off all data transfer so I don't get charged for things that want to update or whatever
2) Keep the GPS functioning
Using the connections manager, I turned the data connection off, but this didn't work at all. It would just connect through the phone line anyway. I resorted to deleting all the internet settings from the phone which was a difficult, lengthy and frustrating process, and I ahd to put them all back in when I got home.
Also, after I did that, GPS did not work anymore. I could not find a setting anywhere to turn on or off the GPS by itself... is it linked to the data connection? I couldn't actually turn the data connection on in the connection manager when I deleted the settings... I couldn't access the GPS at all from any program unless I had the data connection on, and working. Is that right, and... isn't that weird?
Yes, it's weird. I faced same problem. Solutions?
To totally prevent data connections, you have 2 choices:
1- remove GPRS/3G configuration from provider
or
2- nodata! That's what I use
About the GPS not working while in fligh mode, I turn on bluetooth and then GPs works
or alternatively rename the access point name...
e.g. mine is "orangeinternet" I stick a character in front "xorangeinternet" and thus it fails to connect if you do accidently start up an app that tries to connect.
I know it works for Orange - cant confirm it with other providers but I suspect it will be the same.
Can anyone else on other provider networks confirm?
nodata is quite handy
Nice, I'll try nodata!
The GPS eludes me though.
Use "Advanced Config 3.2" Available on this site.
Menu->More Settings->Connections
You can disable each network connection. does not affect GPS
To use solely the GPS you need to install a specific GPS enabled stand alone software on your phone, such as TomTom or IGO.
Otherwise you will be using a AGPS data connexion which is expensive abroad.
flykthewiz said:
You can disable each network connection. does not affect GPS
Click to expand...
Click to collapse
actually it does... tomtom7 doesn't work if you're in flight mode (no problem with igo8 thou).
I'm having a problem with my diamond, at work I connect to the wifi hotspot there but I don't get very good signal, tested with another device(ipod touch) and it has full signal and works without disconnecting. Mine disconnects randomly when it looses the signal completely. I'm using stock wwe 1.93 rom with radio 1.08.25.08. Is there a way to make Wifi work better? Maybe changing the radio will fix it? I saw in another thread that weak wifi signal would be the cause of a disconnected wifi antenna inside the phone. I really don't wanna slice open my phone as I'm pretty noob at this. Any other recommendations would be great! Thanks in advance
does anybody know how to try and fix this?
try your Wifi with an AP at home and if you have the same problem, use your warranty. You can try with the programm Wififofum to see the Db that your phone is indicating near the AP (10->80 DB ( 80 is far of the AP)). I hope it will help you.
Hi,
I use iGo8 and TomTom 7 and with both of these applications, everytime I close them I can see that they openend the GPRS connection (internet mobile)... my internet has no limit of use so it's not much of a money issue but the battery is going down pretty fast beacause of this background running data connection ...
Is there something I could do ?
Install nodata.cab from modaco
prdic said:
Install nodata.cab from modaco
Click to expand...
Click to collapse
Thanks for the reply. I tested the software you pointed out. It's a solution except that its pretty boaring to have to lock the internet connection everytime you need to use the GPS (for it's 15 to 20 times a day with a new adress) ...
Any idea on how to disable the connection only for the GPS software ?
EDIT : even with all connections disabled with nodata, the gsp still manages to open the connection !
I had exactly the same problem. I tried the same cab as you and it didn't work... I tired creating a bogus connection and selected it to try and stop the GPRS connection as someone else advised but a GPRS connection kept on opening itself...
Do what I did and flash a stock HTC ROM over your SFR one... It completely solved the problem for me.
You might want to dump the old SFR one first for guarantee reasons.
I use igo8 and it never turns on the GPRS connection.
I don't know if this is the cause, but can you check if assist GPS is ON or OFF?
Mine is OFF which is the default behavior...
If you don't have it, you'll need an app like "Advanced Config" in order to be able to see and change the A-GPS behavior
--Double post--- Ignore
This was the problem ideed. I have direct access to the A-GPS ON/OFF option in the parameters and it was ON. Switched it to OFF and the navigation software don't start the data connection now !
Thanks !