Related
I`ve install a wm6.5 version that whas for microsoft internal use only. The phone boots up, enter in OS, but this is not respond. and now I can connect my diamond to pc to install another rom. What to do? thx
Have you tried to put your phone into Bootloader mode and flashing from the PC again?
I don`t know how. please tell me how. I`ve search the google for bootloader mode, be i didn`t find. i have a 32bit vista. thx
I`ve solve the problem. i didn`t know the thing whit bootloader mode. Thank you very much!
everytime i try to upgrade my xda alpine which is connected to the computer thru usb craddle, it suddenly turn off n went to bootloader mode....what is the prob??? help pls pls...
now i think it goes into bootloader mode after autoconfig!!! when it ask for autoconfig, no matter i choose yes or no, it wil go into bootloader mode!! help!!!
ronan_chai said:
now i think it goes into bootloader mode after autoconfig!!! when it ask for autoconfig, no matter i choose yes or no, it wil go into bootloader mode!! help!!!
Click to expand...
Click to collapse
should have before you upgrade, remove the sim card first ...!!! you try to upgrade with an official ROM for your device for the ROM you can find it at -> http://www.shipped-roms.com/index.php?category=windows mobile&model = Alpine
No...i didnt have my sim card inside when i upgrade...and now it wil go into bootloader mode right after autoconfiguration...and it also go into bootloader mode halfway upgrading...and lost connection with the computer...so i cannot upgrade or flash it back to original rom...what sud i do??
ronan_chai said:
No...i didnt have my sim card inside when i upgrade...and now it wil go into bootloader mode right after autoconfiguration...and it also go into bootloader mode halfway upgrading...and lost connection with the computer...so i cannot upgrade or flash it back to original rom...what sud i do??
Click to expand...
Click to collapse
try to hard reset the device , this is her guide HTC Alpine hard reset
To perform a full reset
A full device reset clears memory, deletes all data, and restores the Pocket PC Phone to its default settings. Programs installed at the factory remain. All data that you have created and programs you have installed are erased.
Press and hold the Power button, and then use your stylus to press the “soft reset button” at the same time, as shown below. Be sure you have backed up all your data on an SD card or on a desktop PC before performing a full reset. after you hard reset the device, connect to a USB sync and you Flash Room again All you have to remember, allow usb connection .... and not disabled its usb connection Okey if you still have problems you can contact me
Do i need to go into bootloader mode first before flashing?? Cause what i did was, connect it the comp, and while it is stil connected with windows mobile device centre and the phone is still in windows mobile desktop, then i run the MaUpgradeUt_noID.exe, and halfway upgrading, it just turn off n go back to bootloader mode...and then after that, it auto black out after each autoconfiguration.
And by Flash Rom, do you mean just run the MaUpgradeUt_noID.exe with all the files in it?? or there is something else i should do???
Sorry for my ignorance And ur guidance will be very much appreaciated!!!!
ronan_chai said:
Do i need to go into bootloader mode first before flashing?? Cause what i did was, connect it the comp, and while it is stil connected with windows mobile device centre and the phone is still in windows mobile desktop, then i run the MaUpgradeUt_noID.exe, and halfway upgrading, it just turn off n go back to bootloader mode...and then after that, it auto black out after each autoconfiguration.
And by Flash Rom, do you mean just run the MaUpgradeUt_noID.exe with all the files in it?? or there is something else i should do???
Sorry for my ignorance And ur guidance will be very much appreaciated!!!!
Click to expand...
Click to collapse
Windows mobile device centre?--Seems to be the Vista/Win7 driver problem. Search for it, using the Search button.
Flashing with Win7/32bit or Vista
muckelmaus said:
Windows mobile device centre?--Seems to be the Vista/Win7 driver problem. Search for it, using the Search button.
Flashing with Win7/32bit or Vista
Click to expand...
Click to collapse
EnterBL.exe should reboot the device into bootloader only, Activesync should disable then. You can access bootloader manually, it's more safe
Now i managed to get into bootloader mode and upgrade it.. but the upgrade hangs halfway, the progress stays at 0% and saying it's upgrading radio, but always failed. What's should i do pls?
ronan_chai said:
Now i managed to get into bootloader mode and upgrade it.. but the upgrade hangs halfway, the progress stays at 0% and saying it's upgrading radio, but always failed. What's should i do pls?
Click to expand...
Click to collapse
remove the battery from the device and wait until 10 minutes, then plug it in again and make sure your device go to the bootloader to reflash
next time before you perform the upgrade whether you've unlock device ??
x8 stucked on sony ericsson screenshot , trying to flash stock rom X8_E15_2.1.1.A.0.6_generic.ftf using flash tool 0.6.9.1 OS Windows 7 but flash tool showing (error - flashing abort)
Awaiting for suggestion.
Thanks
Usb cable lost conection! Its happen to me some times. Just again flash 2.1...... and hold back button to 4% then release it and dont move phone
Sent from my E15i using xda premium
Have u installed gordon gate drivers?
First connect phone then hold press back button untill green light show. Then check if windows recognized it.
Then remove battery.
Go to flash tool select the ftf u want to flash then wait until the dialog appear. Then connect phone (if u unplug before) insert battery hold press back till green light show, now it should be flash
Sent from my X8 using Tapatalk 2
supermiki said:
x8 stucked on sony ericsson screenshot , trying to flash stock rom X8_E15_2.1.1.A.0.6_generic.ftf using flash tool 0.6.9.1 OS Windows 7 but flash tool showing (error - flashing abort)
Awaiting for suggestion.
Thanks
Click to expand...
Click to collapse
sometimes its happen cz :
- drivers not installed correctly (x8 drivers and gordon)
- make sure your unlock BL process work successfully
- check all your hardware connection (cable, usb, etc)
don't forget to have > 60% battery
have you install the driver from /driver folder on the flashtool installed folder??
and dont forget to check the X8 ADB driver and fastboot / flashboot whatever LOL
just check that 2 thing and you shouldnt get any problem
Hey install the gorden gates driver provided with flastool and try again.....
Sent from my E15i using xda premium
Finally I've reflashed the rom but still after the pin code the phone does not hook any opertor and also no access to the applications menu
Reflashed with X8_E15_2.1.1.A.0.6_generic.ftf but the phone works only with no sim. E15i SI 1251-9820
supermiki said:
Reflashed with X8_E15_2.1.1.A.0.6_generic.ftf but the phone works only with no sim. E15i SI 1251-9820
Click to expand...
Click to collapse
dont forget put in your sim card to your phone while flash process dude ..
BlackRabbit1703 said:
dont forget put in your sim card to your phone while flash process dude ..
Click to expand...
Click to collapse
Flashed with sim in the phone
try flash again
this may happened sometimes
Dear Forum,
I have a I9001. I've been busy with it for a week now and read and tried allot. Nothing seems to work!
So , my I9001 doesn't have a recovery any more. No root or CWM. The rom works (2.3.5) but crashes or freezes. Then tried every
combo in the book to get into the recovery mode but nothing works.
So I ask you biggest android forum of the world: What the hell is going on??
Tried to get into recovery by recovery boot by pc, tried installing other roms or kernels or whatever.
Also getting a mmc boot mbr read failed when trying above stuff by odin.
Also when I shutdown the phone and I start it up again then it has to be installed again like country and date etc etc...
Thanks in forward for answering.
Greetz,
Happybeat
But download mode still working? Then you could try to flash the recovery via Odin again or a stock Rom, AFAIK those contain the stock recovery as well so afterwards you'll have a "fresh" installed phone... Might work, no other ideas...
M322 said:
But download mode still working? Then you could try to flash the recovery via Odin again or a stock Rom, AFAIK those contain the stock recovery as well so afterwards you'll have a "fresh" installed phone... Might work, no other ideas...
Click to expand...
Click to collapse
AFAIK? I don't know what that is sorry...And yes the download mode works fine.
happybeat said:
AFAIK? I don't know what that is sorry...And yes the download mode works fine.
Click to expand...
Click to collapse
I think that CW did an update and pushed it out to devices or something. I am having the same situation as you, I am unable to grab the device into CWR.
Dark_Savior said:
I think that CW did an update and pushed it out to devices or something. I am having the same situation as you, I am unable to grab the device into CWR.
Click to expand...
Click to collapse
It's insane haha im still trying stuff. Now when I reboot the phone I have to says what country etc etc...but when I try to connect to wifi it says TWLauncher chrashed...I still have connection with the phone by PC. Is there maybe anything what I can change or do?
happybeat said:
AFAIK? I don't know what that is sorry...And yes the download mode works fine.
Click to expand...
Click to collapse
AFAIK - As Far As I Know
happybeat said:
Is there maybe anything what I can change or do?
Click to expand...
Click to collapse
Well if your phone is in such a "bad condition" I would download my stock Rom from sammobile and flash it via Odin, then it should be "factory fresh". The only thing that is annoying is that you set up your phone again...
Sent from my GT-I9001 using xda app-developers app
ell if your phone is in such a "bad condition" I would download my stock Rom from sammobile and flash it via Odin, then it should be "factory fresh". The only thing that is annoying is that you set up your phone again...
Sent from my GT-I9001 using xda app-developers app[/QUOTE]
Ok ill check that out. I'll let you know.
Well I tried and nothing. It says that it passed and that odin did its thing but it didn't.
Is there a program that can do a clean install? Or cant I just clean it when I hook it up to a pc? Because I have access to the internal memory of the phone by pc.
happybeat said:
Well I tried and nothing. It says that it passed and that odin did its thing but it didn't.
Is there a program that can do a clean install? Or cant I just clean it when I hook it up to a pc? Because I have access to the internal memory of the phone by pc.
Click to expand...
Click to collapse
Well I think it should be a clean install and if I connect my phone in download mode to the pc I haven't access to the internal storage!
Did you do it like it is supposed in this tutorial? http://forum.xda-developers.com/showthread.php?t=1922505
By the way are you on a stock rom or not?
Yes, it's important to tell are you on stock or custom Rom
Mikroos said:
Yes, it's important to tell are you on stock or custom Rom
Click to expand...
Click to collapse
Sorry for my late answer!
stock I think. This is every info I have on the phone:
About phone:
Firmware: 2.3.5
baseband: i9001xxkpf
kernel: 2.6.35.7-perf [email protected] #1
build: gingerbread.xxkpg
when I do *#1234#:
pda: i9001xxkpg
phone: i9001xxkpf
csc: i9001xenkp1
That's it...
Ok...this is strange...I just connected it to my pc and have access to it...but when I deleted something what was in download it says delete permant I say yes...when I restart it and connect it back to the pc and go to download its back??
Sorry don't know any solution but I'm quite new in here so maybe you can post it into/revive this thread because the Q&A is (in my opinion) not well visited by I9001 users because it's meant to be for i9000.
http://forum.xda-developers.com/showthread.php?t=1826216
Sent from my GT-I9001 using xda app-developers app
happybeat said:
Ok...this is strange...I just connected it to my pc and have access to it...but when I deleted something what was in download it says delete permant I say yes...when I restart it and connect it back to the pc and go to download its back??
Click to expand...
Click to collapse
Try a reset and if that is not working try a restock.
fotbal5 said:
Try a reset and if that is not working try a restock.
Click to expand...
Click to collapse
Thats the problem. There is no way of getting into recovery mode. I can get into download mode but not into recovery mode. It's like it is vanished.
And I dont know if someone from the mods could put this into the 9100 section? I thought I had to put questions here since there isn't a Q/A for 9001...
happybeat said:
Thats the problem.
Click to expand...
Click to collapse
You can do a factory reset over the dialer on a stock Rom by entering a certain code, you can look it up in the xda wiki about the I9001
Sent from my GT-I9001 using xda app-developers app
M322 said:
You can do a factory reset over the dialer on a stock Rom by entering a certain code, you can look it up in the xda wiki about the I9001
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
Yep did that. Doesnt work. The thing is also that I cant change anything. Everytime when I reboot I need to install again. So it doesnt remember. Same when I connect it to the pc and I remove a file from download that I do not need it doesn't remove the file because the next time I reboot its back. It's like the internal is locked?
I can't find a good page with an explanation, so I'll just type it out myself. If anything isn't clear, ask!
You can try getting into recovery mode using the Android SDK, maybe that could work...
Install the latest version of Samsung Kies if you haven't already (for the USB driver)
Install the Android SDK (http://developer.android.com/sdk/index.html) You'll need just the SDK, everything else is useless for this
Open a command prompt and go to the directory where you have installed the Android SDK (basically you'll run the command cd "<folder>", where folder is something like "C:\Program Files (x86)\Android\android-sdk")
Start your phone and go to Settings > Applications > Development
Enable USB debugging (if it's not there, just find that option and enable it )
Connect your phone using a USB cable
Go back to your command prompt and run the command tools\adb reboot recovery
Hopefully your phone will boot in recovery mode
Good luck!
Marshian said:
I can't find a good page with an explanation, so I'll just type it out myself. If anything isn't clear, ask!
You can try getting into recovery mode using the Android SDK, maybe that could work...
Install the latest version of Samsung Kies if you haven't already (for the USB driver)
Install the Android SDK (http://developer.android.com/sdk/index.html) You'll need just the SDK, everything else is useless for this
Open a command prompt and go to the directory where you have installed the Android SDK (basically you'll run the command cd "<folder>", where folder is something like "C:\Program Files (x86)\Android\android-sdk")
Start your phone and go to Settings > Applications > Development
Enable USB debugging (if it's not there, just find that option and enable it )
Connect your phone using a USB cable
Go back to your command prompt and run the command tools\adb reboot recovery
Hopefully your phone will boot in recovery mode
Good luck!
Click to expand...
Click to collapse
Ok so thank you for this but unfortunatly it just didnt work. I think it is dead. Does Jtagg do any difference? Like hook it up to that machine?
So what it does at this moment:
It starts up but everytime you start up it will ask you to install everything again. So it asks what country etc.etc...
When I am in it appears to work but starting apps just makes it all crash or freeze.
Im a bit lost at the moment to do anything. It just looks that it doesnt memorize.
I can hook it up to the pc but you cant remove or add anything. You can just look and scroll through it.
my phone is not getting into recovery mode i.e,by pressing volume down it is not getting into recovery mode.this problem started after i gave my mobile to the service center
dsrdy1996 said:
my phone is not getting into recovery mode i.e,by pressing volume down it is not getting into recovery mode.this problem started after i gave my mobile to the service center
Click to expand...
Click to collapse
They restore your phone with the ORIGINAL STOCK ROM and everything that your phone has installed (Including Recovery) is lost. You don't have any recovery installed. You have to re-install it again.
Hit thanks if I helped.
After a visit at the mobile center the entire device will be resetted. Meaning official software and no recovery (Sony has no recovery build in so it seems). So yeah, you need to root it again and instal a recovery.
dsrdy1996 said:
my phone is not getting into recovery mode i.e,by pressing volume down it is not getting into recovery mode.this problem started after i gave my mobile to the service center
Click to expand...
Click to collapse
Tech N You said:
They restore your phone with the ORIGINAL STOCK ROM and everything that your phone has installed (Including Recovery) is lost. You don't have any recovery installed. You have to re-install it again.
Hit thanks if I helped.
Click to expand...
Click to collapse
thanks for giving suggestion but iam unable to get into recovery mode after doing what your said.I attached the screen shot of what iam getting.Can u please say the solution by seeing it
dsrdy1996 said:
thanks for giving suggestion but iam unable to get into recovery mode after doing what your said.I attached the screen shot of what iam getting.Can u please say the solution by seeing it
Click to expand...
Click to collapse
Have you enabled USB Debugging option from Developers Option..?
If no then do it. If you cannot see developer options then go to settings -- about phone -- tap o build number 7 times and you'll unlock developer tools option.
Then enable it and then connect your phone to compter via USB and do the necessary steps to flash CWM.
Also you on locked bootloader or unlocked bootloader.?
Tech N You said:
Have you enabled USB Debugging option from Developers Option..?
If no then do it. If you cannot see developer options then go to settings -- about phone -- tap o build number 7 times and you'll unlock developer tools option.
Then enable it and then connect your phone to compter via USB and do the necessary steps to flash CWM.
Also you on locked bootloader or unlocked bootloader.?[/
Click to expand...
Click to collapse
1. Check USB debugging is connected and your PC has properly installed the drivers for your phone. Also make sure your phone has prompted you to authorise the computer you're connected to.
2. Check no ADB is running in task manager before you try this, check flashtool isnt running or anything else that may use ADB (PC companion etc)
3. Try a different recovery
Oh and stupid question but you have re-rooted your phone first right and SuperSU is confirmed working updated and allowing rooted programs to work?
Oblox said:
1. Check USB debugging is connected and your PC has properly installed the drivers for your phone. Also make sure your phone has prompted you to authorise the computer you're connected to.
2. Check no ADB is running in task manager before you try this, check flashtool isnt running or anything else that may use ADB (PC companion etc)
3. Try a different recovery
Oh and stupid question but you have re-rooted your phone first right and SuperSU is confirmed working updated and allowing rooted programs to work?
Click to expand...
Click to collapse
sorry i didnot check usb debugging for installing recovery.Thanx for giving suggestions
Try this step you'll get option
Sent from my C5302 using XDA Free mobile app