Related
I have tried everything to get my wlan to turn on, but no such luck. Working fine two days ago without any new installs. I have tried using TC wlan.exe, wrlsmng.exe, tried the comm manager obviously. I have looked at registry but all settings seemed ok and I have also tried the wireless manager.
I am using Duttys_Official_WM6.1_Rom_5.2.19716_UC. I have searched and read everything to no avail. Any help would greatly be aprreciated. Thanks in advance
Flash a different radio. I had an issue with my 8125 when I would hit the WLAN icons it would flash and then show an X on the icon. It would never power up. I flashed another rom and a radio and it worked fine. Try different radios.
I may be a fool asking this, but have u hard resetted phone after installing ROM, cause this kinda happned to me, I installes same ROM and installed Taskplus pro after that, then My phone and Wlan got stuck. then I did a hard reset and BAM.... phone is working fine now
It is always good to hardreset your phone right after you flash any ROM. to hardreset after flash: hold down the 2 softkeys above the IEexplorer and mail button, while holding those down use stylus and press reset button once, keep holding the 2 softkeys until instuctions comes onscreen with white background, follow those instructions. if phone resets after using stylus then it wasn't done properly.
Hello everyone,
I've been literally 12 hours searching for possible answers on how to repair my Galaxy Note N7000 which from what I've concluded, has a problem that can be easily repaired but I've found nothing but limitations when I have a go at it. It doesn't seem to be bricked as I can still access recovery mode, download mode and it effectively boots, it's only giving me errors.
Here's what happened:
1) I tried rooting it using UnlockRoot PRO. Paid the PRO version, detected the device. Later I find it says the N7000 with 4.1.2 is not compatible so the rooting process was never completed, so I rooted it using Root_SuperSU.0.95.Only-signed and it worked just fine.
2) Everything worked fine, downloaded Andromizer to customize the phone.
3) Changed the DPI size to test it, then went to Developer Options and changed the Animation scales to 0.5 to make it all run faster.
4) Rebooted the device. Once I did, I got nothing but "SystemUI has stopped working" together with "TouchWiz home has stopped working errors".
I checked around the web and so far, what I've found (and tried) is this:
1) There seems to be a bug related to TouchWiz and the Animation Scale option (or perhaps the DPI size option in Andromizer). So I tried to do a wipe data / factory reset through recovery mode.
2) When trying the wipe data / factory reset through recovery mode, I rebooted the phone, only to find the SAME errors after I registered everything.
3) First option that came to mind was to wipe everything and immediatly reinstall the Official JellyBean 4.1.2 firmware (at this point I want to pretty much unroot the device as I didn't know it was going to give me so much trouble). When I tried that, I realized that SUDDENLY, Odin (nor Heimdall) are NOT detecting the phone in download mode. I'm guessing it's because USB Debugging is turned off but, I can't access the phone settings. It's my only logical conclusion, although it should be turned on given I could install PhilZ Custom Recovery later.
4) I search around the web and it says it's a driver problem. So I uninstall everything, run CCleaner, USBDeview to uninstall everything related to the Samsung Galaxy. Reboot. Install drivers again. Reboot. Plug booted phone and let Windows detect the device, installed successfully. Reboot in download mode. Let windows detect the device, installed successfully. Run Odin: DEVICE NOT DETECTED. (It does detect it while it's booted though, only it doesn't work for **** obviously).
I've literally tried everything. I've tried checking for a way to install the firmware via Recovery Mode instead of Download Mode. I've tried checking for a way to remotely access the device and mod the settings from there using ADB, and I get the same problem in ADB, doesn't detect the device.
Also tried to reset settings to normal via PhilZ Custom Recovery which I managed to install later.
Isn't there just a way to reset all settings to normal? Shouldn't a factory reset do this? How can I get SOMETHING to work and try to recover the phone? Any Aroma Recovery Script? Any way to mess with the system folder and modify settings manually via notepad or something since due to the SystemUI / TouchWiz home errors I can't access the phone settings?
I'm barely awake at this point. Can't believe I've stressed myself this much. Please help. This is beyond retarded.
Thank you,
Z
i had the same exact problem just few hours ago.....first of all you should boot into recovery mood by pressing vol up+ home button+lock button until samsung logo shows and then wipe all data/factory reset and wipe all cache partitions..........if that didnt fix it you should try rerooting it againg after re wiping
I read the post but it seems you have done a lot of things and nothing worked. So what is the situation right now? You can boot as normal but cannot get any icons or settings as sysUI and TW crashes?
Try installing GB ROM then wipe/cache first. If good, root GB ROM then do full wipe. Then test ROM for crashing.
If good then install JB rom and test. Let us know.
unable to enter phone setting ？ then just simply look for a secsetting.apk for ur version then replace it n set the permission rw-r--r--
You could use adb to modify your build.prop
Sent from my SGNote
Makrilli said:
You could use adb to modify your build.prop
Sent from my SGNote
Click to expand...
Click to collapse
Bwahahah, now I see why you guys enjoy calling newcomers "noobs".
It was a computer problem. I just reinstalled JB 4.1.2 from my netbook and it worked.
Weird as hell though, given that I updated my GT-N7000 to JB 4.1.2 through Odin in this computer and it never gave me any problems.
I AM going to learn some ADB / Android SDK though. I'd rather learn everything before something like this happens to me again.
I appreciate everyone's concern, and thank you all for it.
nice to hear that you had this one fixed
Glad to hear its working now.
n7000 touchwiz home stopped
Zardonic said:
Bwahahah, now I see why you guys enjoy calling newcomers "noobs".
It was a computer problem. I just reinstalled JB 4.1.2 from my netbook and it worked.
Weird as hell though, given that I updated my GT-N7000 to JB 4.1.2 through Odin in this computer and it never gave me any problems.
I AM going to learn some ADB / Android SDK though. I'd rather learn everything before something like this happens to me again.
I appreciate everyone's concern, and thank you all for it.
Click to expand...
Click to collapse
hi.... im having the same problem as yours. i dont know what to do
lulu2050 said:
i had the same exact problem just few hours ago.....first of all you should boot into recovery mood by pressing vol up+ home button+lock button until samsung logo shows and then wipe all data/factory reset and wipe all cache partitions..........if that didnt fix it you should try rerooting it againg after re wiping
Click to expand...
Click to collapse
I have tried to upgrade my touchwiz to the new one, but got the danger message, would clearing the cache help?
Sent from my SM-N910C using Tapatalk
So to set the story i had came home and rooted jb via linux method. Then presumed to use bootstrap as a recovery. I installed it and it said success. Then i presumed to change the bootloader unknowing if it was locked. So i reboot and i am stuck at Encryption unsuccessful screen and the only option is to power off or reset. What do i do ive tried to reset but it doesnt work also i tried to do a hard reset via stock recovery this also didnt work im unsure where to go about this problem now. Please help Im panicing! From what ive researched i think its soft bricked. Also there appears to be a fix on House of Bionic but it isnt clear. Lastly, I believe the problem resides with bootstrap but im unsure its just a hunch. All options will be tried.
You can use fastboot -w to wipe it and start over but you can't use the Bootstrap recovery any longer with 4.1.2 as it causes the corruption you are seeing.
Moto X 2014: unrooted with bootloader unlocked. It's running Stock 5.1 and I haven't messed with anything on it. I gave it to my Dad after a few months of using it, so I factory reset it and gave it to him, 2 weeks later he tells me it has stopped working. It boots up normally, but from then on it is black, I can access minor parts of the OS such as the power off menu, the camera (by shaking) and Moto Display, but everything else doesn't work. I have never seen anything like this before, and I am well accustomed to flashing custom ROMs and rooting Android. If it comes down to it I will factory reset it or flash stock, but I can't even plug it into my PC and retrieve any files. Anyone have any idea whats gone wrong?
I have attached a video demonstrating what's happened to help diagnose the problem.
thomaswilloughby said:
Moto X 2014: unrooted with bootloader unlocked. It's running Stock 5.1 and I haven't messed with anything on it. I gave it to my Dad after a few months of using it, so I factory reset it and gave it to him, 2 weeks later he tells me it has stopped working. It boots up normally, but from then on it is black, I can access minor parts of the OS such as the power off menu, the camera (by shaking) and Moto Display, but everything else doesn't work. I have never seen anything like this before, and I am well accustomed to flashing custom ROMs and rooting Android. If it comes down to it I will factory reset it or flash stock, but I can't even plug it into my PC and retrieve any files. Anyone have any idea whats gone wrong?
I have attached a video demonstrating what's happened to help diagnose the problem.
Click to expand...
Click to collapse
If you search the forum here for "black screen" it has happened to other people as well on stock 5.1. Supposedly the fix is a factory reset.
Sent from my XT1095 using Tapatalk
AGISCI said:
If you search the forum here for "black screen" it has happened to other people as well on stock 5.1. Supposedly the fix is a factory reset.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Ok, It was just really surprising thats all. I will factory reset then. Thanks
I am having the exact same issue. Have you had a luck resolving it short of a factory reset?
My phone battery died last night. I plugged my phone in, let it get about 15% charge, then tried to turn it back on. The phone boots like normal, but after the boot animation goes away, the screen is black. Active notifications still seem to work, and I can hold the power button to get the Power Down option. I can boot into the bootloader & access recovery just fine. However, my phone is fully stock (no root, no bootloader unlock, no anything). I can't seem to access ADB when the phone is powered normally (ie, when I'm at this mysterious black screen), but it's possible that USB debugging isn't even enabled.
So far, I've found a few people who've said a full factory reset will fix the problem, but I'm looking for another solution, or at least a way to grab my data before I reset. Since my bootloader's still locked, I can't seem to use fastboot boot to boot into TWRP, and I can't find any other way to access my data to copy it off the phone. I've tried wiping the cache using the stock recovery to no avail. Any suggestions?
bjg222 said:
I am having the exact same issue. Have you had a luck resolving it short of a factory reset?
My phone battery died last night. I plugged my phone in, let it get about 15% charge, then tried to turn it back on. The phone boots like normal, but after the boot animation goes away, the screen is black. Active notifications still seem to work, and I can hold the power button to get the Power Down option. I can boot into the bootloader & access recovery just fine. However, my phone is fully stock (no root, no bootloader unlock, no anything). I can't seem to access ADB when the phone is powered normally (ie, when I'm at this mysterious black screen), but it's possible that USB debugging isn't even enabled.
So far, I've found a few people who've said a full factory reset will fix the problem, but I'm looking for another solution, or at least a way to grab my data before I reset. Since my bootloader's still locked, I can't seem to use fastboot boot to boot into TWRP, and I can't find any other way to access my data to copy it off the phone. I've tried wiping the cache using the stock recovery to no avail. Any suggestions?
Click to expand...
Click to collapse
Unfortunately I couldn't retreive any data from the phone, I can confirm however that a factory reset does fix the issue. The Android automatic backup does work in the broken state so I did manage to restore my settings and apps. But the internal sd card was wiped upon factory reseting. Just an idea of the top of my head: Try running adb backup and see if that works, and then unlocking the bootloader, flashing twrp, restoring the backup, and finally transfering the internal sd card data to a mounted drive using twrp. Thats just a stab in the dark and i dont have the phone on me to test it. Give it a try and lets hope Motorola will fix this bug soon.
Ok, thanks. I did try adb backup, but adb won't recognize the device when it's "booted" & sitting at the blank screen, and the stock recovery doesn't give full adb access. I'm currently looking into the various data recovery options to maybe pull some stuff off after reseting. It's really only a few files that I need, so maybe that will work?
bjg222 said:
Ok, thanks. I did try adb backup, but adb won't recognize the device when it's "booted" & sitting at the blank screen, and the stock recovery doesn't give full adb access. I'm currently looking into the various data recovery options to maybe pull some stuff off after reseting. It's really only a few files that I need, so maybe that will work?
Click to expand...
Click to collapse
Unfortunately the internal SD card mounts using MTP and not like a flash drive, so using the usual methods through Windows to recover wont work. However you could try and restore your internal sd card using this solution: http://goo.gl/OKdV14
As for accessing adb through recovery, you could try this method: http://goo.gl/5T7bhq
Hopefully one of these methods should work, so you can at least recover some of your files.
I had the same problem today. I tried to backup a twrp backup I have made few weeks ago but I still had the black screen. The only solution is to factory reset...
Happily I could have saved my data when I was on TWRP. Anyone knows how to restore sms from the data I have saved ?
Hi Guys, I come to the point where I need help please, I have very long experience in rooting but this issue I could't fix and/or find a solution for it since the 901S is unrooted there is no EXE RUU not been touched. This is my wife phone and I had same issue with main a year ago but since my phone was rooted I could fix it.
The issue is when the phone start rebooting by it self at once, nothing was done to cause that like installation app or what so ever. It start and when reach home screen, few sec it reboot from 0.
phone data: S-On, Hboot-1.61.0000, Radio 4t.31.3218.26, oS-5.16.709.4
I have tried this:
-Unlocking with unlock_code.bin, is give me the yes/no screen when I click yes it reboot to stock recovery then nothing, (it show the message about missing E bitmap)
-uploading rom stock or any other didn't work, not by using fastboot or any other method I know.
-run into save mode help give few more secs but nothing, it reboot here too
-factory reset from device didn't work as I click okay but it keep resetting.
-order *#*#3424#*#* and factory reset also nothing.
-the device memory is 95% full, I tried to format data or system or from fastboot or by deleting files also nothing get deleted all stock and after restart I see ever thing like it was.
any suggestion here?
thx all,
Any help any one
No one no help!!