Database Develop

QTek 9090 Rom Update Dead

Hi All,
I've tried to update my rom version to 1.22
When I do that, I get an error message: Connection Error.
Now, my Qtek don't boot. When I turn it on, I get a black screen with 2 words:
SERIAL
v2.06
At other threads somebody say that I must flash the rom with MTTY. Where can I download an Rom image? At www.qtec.nu I can only download an InstallSheeld, but I can't use that now because Activesync don't see my device.
PLEASE HELP ME !!
Thanks,
Danny

i had the same problem.
what i did was kill the update process in windows and start it again and it worked
[email protected]

Danido said:
Hi All,
I've tried to update my rom version to 1.22
When I do that, I get an error message: Connection Error.
Now, my Qtek don't boot. When I turn it on, I get a black screen with 2 words:
SERIAL
v2.06
At other threads somebody say that I must flash the rom with MTTY. Where can I download an Rom image? At www.qtec.nu I can only download an InstallSheeld, but I can't use that now because Activesync don't see my device.
PLEASE HELP ME !!
Thanks,
Danny
Click to expand...
Click to collapse
Danny, check my reply at http://www.pocketpc-club.nl/forum/showthread.php?t=45319&page=3
Grtz,
DUTCH

Serial 2.06
dear Danido,
i got the same issue and i got over it.
u need to go to search and find this file:
PDA2k_CDLWWE_11222_169_10200_SHIP
then do the installation while your ppc is in the cordl with power supply.
good luck

helpe me
ihave qtek9090 .the problem its the device not open and(serial v2.06)apear
on the top & botom respectivly, and the pc not connect withe pocket pc
i need the rom & activesynch softwere
please reply me on" [email protected] "

You cant post personal info...
muppet said:
i had the same problem.
what i did was kill the update process in windows and start it again and it worked
[email protected]
Click to expand...
Click to collapse
[email protected]
helpe me
ihave qtek9090 .the problem its the device not open and(serial v2.06)apear
on the top & botom respectivly, and the pc not connect withe pocket pc
i need the rom & activesynch softwere
please reply me on" [email protected] "
Reply With Quote
Click to expand...
Click to collapse
Erase your email if you want to share your mail to anybody pm them please. maybe you can find out the answer but if you post here please ask by this way i know is slow... but many people can check the answer if you all post all the process.

[email protected] said:
ihave qtek9090 .the problem its the device not open and(serial v2.06)apear
on the top & botom respectivly, and the pc not connect withe pocket pc
i need the rom & activesynch softwere
please reply me on" [email protected] "
Click to expand...
Click to collapse
since you already have a problem, please use windows xp for now.
i would try to actually downgrade to stock ROM first (please refer to wiki to get the correct stock from your device)
secondly, i would try
http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_STUCK_AT_STARTUP

upgrading xdaIII (qtek 9090 )with italian rom 14004_153_1120

HELP MY QTEK 9090 is totally struck when I eas upgrading I've tryed so many times BUT NOTHINGS HAPPENS!!! I'VE ALWAYS RED ERROR MESSAGE ADN ICAN'T GO BACK!!
CAN ANYBODY HELP ME PLEASE!!
THANKS
:twisted: :evil: :?: :?:

i have any problem like your, what error message you have? win ce image error or anyhink like this?? can you get to bootloader?

Topic moved to BA Upgrading etc.
Did you read this page
http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade

no i can't!!!
no I can't the pda is completly dead ti gives me the writings
SERIAL
V2.07
AND NOTHING ELSE!!!
I follow the FAQ suggestions but nothings HAPPENS!!!
HELPME PLEASE!!!!
:evil: :evil: :evil:

1)Take it out off the cradle.
2)Take the battery off, and leave it off for about 20 minuts.
3)Make sure that the USB cable is connected directly to your PC, and not through a HUB.
4)Reboot PC, dont start any programs.
5)Put the battery back on you BA, switch it on and Cradle it
6)Follow instructions in WIKI

it work only in eglish version
Thaks Bosjo but works the english version rom only!!
I've discovered , anso I thank you so much, that exist one italian version only for my qtek 9090 the other one once I've tried it
doesen' t work AGAIN!!, I : was been found the same problem...
I'will follow your suggestions...
:evil: :evil: :?:
thanks
Alexj

[please follow bosjo suggestion if u have an english versio, but I need the italian one it's a big probelm for me to install it...damn...!! :twisted:

bosjo said:
3)Make sure that the USB cable is connected directly to your PC, and through a HUB.
Click to expand...
Click to collapse
****, i made a Typo, it should say
3) Make sure that the USB cable is connected directly to your PC, and NOT through a HUB.
It should work with all the roms. (those on the 1.40 link page)

ti's all ok over there
Yeah my fried my cradle is direcly connected to my usb port...
thanks :twisted: :evil:

BAD ROM UPDATE!!
AND NOW : ERROR 102 THE ROM IMAGE FILE IS CORRUPT !!!
I'M REALLY BEACAME NERVOUS..
Any suggestion bosjo??
Please I'm struck again.. :evil: :evil: :evil:

always stuck
Hi my friend after having succes to upgrade my 9090 in english, no way that italian programs, works I've tried to install italian cab files..but. nothings happens.
then I restarted from zero and that'it..
AND NOW : ERROR 102 THE ROM IMAGE FILE IS CORRUPT !!!
and now what should I do please?? The separated files in(verion in WWE) seems not to work !!!!
I'M REALLY BEACAMING NERVOUS..
:evil: :evil: :evil:

Re: ti's all ok over there
alexj10 said:
Yeah my fried my cradle is direcly connected to my usb port...
thanks :twisted: :evil:
Click to expand...
Click to collapse

Well I am lost now.
You say that you can flash a wwe rom, if so which one.
You say you cant flash the ITA 1.40 rom but you dont tell us how you are trying to flash it.
Best is always to start form the begining.
Get your shipped rom back on the device.
Upgrade the radio .....only
empty out the ext rom....
then falsh the CE...only
and if you need help tell us what you did as it would explain how you got the error message. We have no idea what you are doing thus cant help you much.

The program I've first tried named BA_DT_ITA_14004_153_1120.ship
doesent' work !! So Ive my 9090 completly dead, I've red almost all the instructions but now I really dont'know how to move myself, and I'dont remeber the previuos version because is cancelled.the attemp to update to 1.40; 1.40.153; 1.12.00 always fails
I've tryed many times to run the program above, but the error messge is the same : soft reset and restart....
so really do not be able to
Get your shipped rom back on the device.
empty out the ext rom....
then falsh the CE...only
can u hepl me please ??

Ok lets get a wwe 1.40 on your device. (as I am not sure if the ita is Broken)
Follow :
http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade
1) Take the IMate rom.
2) Download the rom and the MA file.
On device
1) On your device perform a Hard reset
2) Remove the battery
3) Wait 5 mins
4) Put battery in again
on PC
1) Reboot your PC after download
2) Make sure the cradel is connected to your PC with no hub.
3) Turn on device
4) Place it in cradel
Run the upgrade
chose the:
First Method (Quick/Easy) (TYPE II)
Post what happens

country error
thanks for the attempt but the message is country error ...
:evil:

country erroro
[
I've done but..
thanks but the message is :country error....
with the old method applicated at your concept the message is ROM error....and now what's up :?:

What exe are you runing : Name of that file!

file name
the file name is rom 1.13.00
but in th e italian vrsiona the name is ns and anothe rone is nk
Sorry but I'm not so expert mybe isould try the secon method downloading separate file s..??
thanks again.. :?:

There is no file name 1.13.00.exe !

Read First *** Windows Mobile 5.0 on a BlueAngel *** <- H

I followed this topic to upgrade my pocket PC and now my XDA IIs is total unusable. I took the first step is to download the Active Sync 4.0 and the "Version 5.1.1700 Build 14343 - Patched by Mamaich V3", but as the the poster said there are these folders inside the "Version 5.1.1700 Build 14343 - Patched by Mamaich V3"
. Downgrade to WM2003SE
. PH20B
. PH20B1
. Preparation
. WM5_mamaich_patched
but actually i dont see any folder in the RAR file and i only see these files:
. BaUpgradeUt
. GetDeviceData
. EnterBL
. HTCRUU.conf
. HTCRUU.dll
. nk.nbf
i don't know what the hell is these, so i just tried to run a file, see what happen, i executed the "BaUpgradeUt.exe", and it asked me to update new version to my pocket pc, i clicked "yes", then after few second my pocket pc was suddenly disconnected and the screen showed "Serial 2.06" in black color text on white background, after that i have no control to my pocket PC, i can't off, i can't either hard reset or soft reset. I don't know what to do.
Anybody has any idea how this happen and how to fix it, I bought it in Singapore, and now I am staying in USA, there is no O2 service center around, what can i do??????

you are in the bootloader, this is the part were the upgrade process really happens, did you try to remove the battery to reset the unit?, I have sucessfully updated my rom with that latest patch, mamaich must have not included the previous files from the previous patches, that's why you didn't see any other files, but the files contained in the rar are the actuall rom updates, when you were upgrading did it show like 1% complete or something?, and when it entered bootloader mode did you suddenly remove the device from the cradle?, btw, your cradle is connected to the usb port of your pc right?, try to repeat the upgrade process, there are instructions in the wiki incase of a failed upgrade or downgrade, search the forums, but my suggestion is if you didnt have any idea at start of what you are doing you should have research first to avoid your predicament, but I suggest you not to worry, I think the upgrade process was just interupted

Re: Read First *** Windows Mobile 5.0 on a BlueAngel *** &lt
iphong said:
I followed this topic to upgrade my pocket PC and now my XDA IIs is total unusable. I took the first step is to download the Active Sync 4.0 and the "Version 5.1.1700 Build 14343 - Patched by Mamaich V3", but as the the poster said there are these folders inside the "Version 5.1.1700 Build 14343 - Patched by Mamaich V3"
. Downgrade to WM2003SE
. PH20B
. PH20B1
. Preparation
. WM5_mamaich_patched
but actually i dont see any folder in the RAR file and i only see these files:
. BaUpgradeUt
. GetDeviceData
. EnterBL
. HTCRUU.conf
. HTCRUU.dll
. nk.nbf
i don't know what the hell is these, so i just tried to run a file, see what happen, i executed the "BaUpgradeUt.exe", and it asked me to update new version to my pocket pc, i clicked "yes", then after few second my pocket pc was suddenly disconnected and the screen showed "Serial 2.06" in black color text on white background, after that i have no control to my pocket PC, i can't off, i can't either hard reset or soft reset. I don't know what to do.
Anybody has any idea how this happen and how to fix it, I bought it in Singapore, and now I am staying in USA, there is no O2 service center around, what can i do??????
Click to expand...
Click to collapse
READ THIS !!! http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_Home

Hi,
I have to say, I've read the Wiki and I didn't bother trying the upgrade, mainly because the file list doesn't look anything like it should. Tried downloading the v2 patch also, but to no avail. Are we missing something?
Cheers

Don't panic.
I've got the same. The whole sunday w pizdu.
My Qtec is alive.
Make sure ActiveSync is working. It will not connect with MDA, but it is required.
Try:
Camera+powerOn+reset, then
simply reset, then
remove battery, then
insert battery, then
simply reset again
then put MDA into the craddle
[MDA display should change from "Serial" into "USB", activeSync still is not connected]
run BaUpgradeUt
1 minut later you will get big window, with some info about MDA. Press next.
I have tried dosens of combinations of steps above and one of them was good enough. I'm not sure which one.

My Qtek 9090 is completely empty

Hello
I write to you in search of HELP. It has happened to me what it is noticed in all around. When wanting to update my Qtek 9090 of W2003 to WM5 I have lost all the data (toasted). The only thing that works is the Bootloader (the screen shows “USB v.2 07”). A hard reset do not work.
How I can install the image of the WM5 from 0? Somebody can help me? Is there a program? I have tried it with the BaUpgradeUt.exe but it does not work since the PDA looks for the image (and this one this empty). I do not know what to do.
Thanks in advance,
Wing

read the wiki
did u read the wiki before trying the upgrade process? just download rom image and update again ur device, use maupgradeutnoid.exe instead of baupgrade..

How to use maupgradeutnoid.exe?
Hi borjok536
Thanks for the answer. I have used the wiki to run this process. I do not know what I did wrong but I did it
I have tried to use maupgradeutnoid.exe but I must confess that I do not know how to use it. I start in Bottloader modeand the program says that the device is going to be updated
from Device CE image version: (blank)
To: Device CE image version: (blank)
How do I say the program where to find the image (nk.nbf of 32 Mb)? Is it normal that the picture of the device in the program shows a Qtek S200 (PH20B1)?
Regards,
Oskar

Any new news??
Hello guys
I really need help. Someone has an idea?
Thanks.

oirmler said:
Hi borjok536
Thanks for the answer. I have used the wiki to run this process. I do not know what I did wrong but I did it
I have tried to use maupgradeutnoid.exe but I must confess that I do not know how to use it. I start in Bottloader modeand the program says that the device is going to be updated
from Device CE image version: (blank)
To: Device CE image version: (blank)
How do I say the program where to find the image (nk.nbf of 32 Mb)? Is it normal that the picture of the device in the program shows a Qtek S200 (PH20B1)?
Regards,
Oskar
Click to expand...
Click to collapse
You just place the nk.nbf file in the same directory as the exe file. whether you use the maupgradenoid.exe or the other one.
There is not another way to tell the executable where the nk.nbf file is.
C

No result
Hi cso5874
I have made this but the result is the same:
from Device CE image version: (blank)
To: Device CE image version: (blank)
Any other idea. Maybe I am not using the right program...
Regrads.

is this ur first time?
to update ur device? if you execute the update utility (baupgrade.exe or maupgradenoid.exe) and if u see the ceimage version is blank, just exit the upgrade utility and execute it again...

hey borjok536
i had the same problem.
The Upgrade utility didn't show any data of the Rominside the BA.
But just klicked on upgrade and it worked!

good for you..
, if you continue the update process even if the ceimage version doesn't appear, sometimes the update process will stop to n% ... sometimes it work like in ur case, but to avoid that problem you'd better exit the upgrade utility and execute it again...

Finally, the solution
Hi guys
The version is not shown because there is no version, the BA is empty. Finally I sented it to the Qtek tecnical service in Spain. They have put the old WM 2003 SE again (I want to know how )
So, I think I will try it again. How much time does the upgrade last? I have a message on the PC since 1 hour ago:
"Checking the information on your device... Please wait...
Please, don't disconnect your device from the PC or the power supply until the update is completed"
In the BA the Bootloader is shown. Should I wait more or the program seems not to work?
Thanks for your help!

Installing ROM Problem

Hi My Friends
I'm A Beginner In XDA
I Downloaded This ROM From HTC Web Site Support
Link : http://www.htc.com/www/SupportDownload.aspx?p_id=13&cat=2&dl_id=21
THis is an Original ROM From HTC (WM6.1)
I Tryed to Install It but I Have a Problem
When I Open The Install File and Continue The Parts Of Install And Then I'll See The Two Progress Bars On My PC & PDA
It's Go TO 1% percent and then Disconnect And After An Automatic Soft Reset I See The Previous Windows .
The Error Message That I Saw Is In The Attachment Picture.
The First Picture is The Finished Message
The Second Picture is My Upgrade Version From Ver To Ver !!
Please Help Me.
Thanks
Best Regards
MF2FX

STOP NOW
What phone are you using
What version of windows xp or vista