Question for the experts....
Running 5.0.6 with IntersectRaven's latest AVS kernel fyi
(1)On my N1 (Tmo in Orlando) I've changed HSXPA value to 1 from 2 and don't notice a big difference. What value are you using?
(2)My phone is set to WCDMA Preferred for network type vs. GSM/WCDMA only/GSM auto/CDMA only. What network setting are you using?
(3)I dont know what "Enable QXDM SD log" is and what is the "Turn off radio" option? I probably shouldn't mess with these either, just curious!
Related
Is there a way to know what frequencies the Tilt is operating on?
I just got back from Europe and was not able to roam. My account was enabled for international roaming…so says AT&T
Do I have to enable some frequencies or are they supposed to be all on?
Thanks
Ensure that Settings>Phone>Band>"Select your GSM/UMTS band" is set to "Auto".
No "Band" in my Tilt
In Start>Settings>Phone I've got no "Band" tab:
I have:
Phone - Services - Network - PIN2 - Time Zone - More
Ahh ok....install Schap's Advanced Configuration utility which you can find here: http://www.freewarepocketpc.net/ppc-download-advanced-configuration-tools-v2-0-2-0.html
Run the configuration utility and under Phone set "Show Band Page" to Yes.
No Luck...
Installed Schap's Advanced Configuration Utility...Turned on the band tab. Still didn't show after the soft reset.
Did uninstall, re-install, soft reset...etc. Also enabled TTY to see if would show up and it did but still no Band tab...
Whats up with this Tilt...Looks like I might want to install the updated AT&T Rom?
ffs.....the answer is on this very first page of this subforum
http://forum.xda-developers.com/showthread.php?t=370854
SEARCH!
Didn't find it until you pointed it out....Thanks
Works now. The Band was set to Auto so I'm not sure why I could't connect in EU....
Hi Everyone,
I'm looking for some help.
I'm wanting to set my network to "WCMDA Preferred" under *#*#4636#*#*. I am running Ramad's Stock Deodexed 2.3.3 JVH with CF-Root v3.2.
I had it set to "WCDMA Preferred" a few days ago after the Vodafone Shop in N.Z set it to "WCMDA Preferred" which made my 3G Connection much quicker.
I had to fix a problem and had to re-flash 2.3.3 JVH with CF-Root and when i went into *#*#4636#*#* it was already set to "WCDMA Preferred" but once I exited, it reverted back to "GSM/CDMA, auto (PRL)" and I can't change it back to "WCDMA Preferred".
The Vodafone Shop told me I need to select WCDMA Only under the Wireless & Network>Mobile Networks>Network Mode, but then I can only select WCDMA under Radio Bands.
Does anyone know how I can fix this, would it be worth me reflashing 2.3.3?
Cheers,
Don't you have a "WCDMA Only" option in "Network Mode" ? Select that...
Prasad007 said:
Don't you have a "WCDMA Only" option in "Network Mode" ? Select that...
Click to expand...
Click to collapse
If I select that I don't get as good reception as when set to the "GSM/CDMA" auto mode.
Ok, I would really love to set my phone to GSM auto prl because the 3g signal in my area sucks.
But, here's my problem. Whenever I enter *#*#INFO#*#* and select GSM auto prl, it says "Unknown" instead, and after reboot reverts to WCDMA/GSM auto.
I'm currently running Mosaic VI, TalonDev .4.4.8, UGJK4 modem.
Any ideas?
Regards
Smith
Hey,
Since I always used GSM Auto PRL as default preferred network type on my old Android device (and had a much better battery life), I wonder why I can't set it on my XT890 (unbranded (i guess, bought it directly from Motorola Germany) unlocked and rooted - 91.2.26001.XT890.Retail.en.EU - also same network provider).
Per default "WCDMA preferred" is selected, I can successfully switch to "GSM only" and "WCDMA only" but choosing "GSM Auto PRL" always reverts back to the last applied setting instantly.
Any clues, why it doesn't work?
Thanks in advance for any input,
Cheers
Hi all, the question i'm about to ask has been asked on the internet before but i couldnt find any satisfactory explanation for it. I wanted to change my Preferred Network Type from 3G to 2G as 3G reception is not available where i live , i read on some forums that using 2G only setting can prevent the phone from searching for 3G network intervally which may save some battery. Now, i'm confused about which mode to choose for 2G , i dialed *#*#4636#*#* and went to Phone Information, then clicked on "Preferred Network Type" which, by default, was on WCDMA Preferred, What option should i change it to? GSM Auto or GSM Only? my phone is an unlocked htc M7_U so i cant choose the GSM/WCDMA/LTE Option (it would hog even more battery i think) . Also , can changing this Preferred Network Type have any effect on anything else besides the 2G/3G Network options? i mean, is it safe as long as i change the Network type to the correct option? Any help will be much appreciated. Thanks.
I think gsm only mode.
Wysłane z mojego HTC One przy użyciu Tapatalka
thanks , can anyone confirm this? also , does changing Preferred Network Type has any effect on anything else besides switching between 2G/3G/4G mode?
muhammad.uzi1994 said:
thanks , can anyone confirm this? also , does changing Preferred Network Type has any effect on anything else besides switching between 2G/3G/4G mode?
Click to expand...
Click to collapse
should be fine setting to "GSM only", setting it to "LTE/4G only" could make problems, because most carriers don't support calls over LTE (mine would be an example: so if I set to LTE only, I can't make or receive calls, so when it's on auto, it automatically changes to 2G/3G during a call)
You can also just change the setting in:
Settings -> Mobile data -> Network mode -> GSM Only
nkk71 said:
should be fine setting to "GSM only", setting it to "LTE/4G only" could make problems, because most carriers don't support calls over LTE (mine would be an example: so if I set to LTE only, I can't make or receive calls, so when it's on auto, it automatically changes to 2G/3G during a call)
You can also just change the setting in:
Settings -> Mobile data -> Network mode -> GSM Only
Click to expand...
Click to collapse
Thanks, GSM Only it is then.