Related
UpGrade problems
--------------------------------------------------------------------------------
sorry to open a new thread for a probably rare issue , but my problem seems to be NOT related to a particular ROm.
I have my p3660 perfectly running with Mun 2.01 TE WWE WM6 ROM .
I tried many times to update to one of the new roms available in thiese days (both WWE and Italian ROMs )
everytime I'm blocked by the same problem during the upgrading procedure :
I try to describe what happen :
1) the device is connected to the PC with AS 4.5 and the sync is completed.
2) After having launched " romupgradeutility" , the sequence of three steps seems to be ok and I arrive to see the page where there is the bar graph starting a 0% and the recommendation " do not disconnect the device ..."
3) nothing happens for 10-15 seconds
4) A warning message referring to " error 202" arrive ; it seems that the device is not connected to the PC , but in reality the device IS connected and IS NOT in bootloader mode. The device is perfectly running as in any other normal sync session .
So , this stops the upgrade procedure
If I repeat the same from 1) , same result
In the past ( and the last !) rom upgrade , I remember I was forced to restart after the bootloader mode arrived into the device , but this is not the case.
I tried :
a) soft rest the device
b) restart PC
c) reinstall AS on the PC
4) change the cable ..
with out any result
( PC with XP )
Thanks in advance for any support/suggestion/help
Hi
I had exactly the same problem and I could solve it very fast:
- When you get the error message on the upgrade utility just close the utility
- Leave the Trinity connected to the PC and don't turn it off
- Restart the utility, check all boxes as usual and you will see after that the ROM upgrading.
It's a bit strange and I don't know why this happens, but the workaround as described worked on my Trinity.
Ciao
Jarivs
thnaks to jarvis , but..
I'm sorry , but I repeated many times the procedure exaclty as you describe , but I find always the same rusult
in your experienc e, was you device in bootloader status at the end of the first trial ?
mine is not and I do not want to force it in a different way..
Thanks again for any support
Maybe that's the difference. As soon as my Trinity was in bootloader status it has lost the connection (as stated in the utility) and as I told you I have restarted the utility, checked all boxes and after that the upgrade started.
Sorry, I can't say more then this. I have no clou what else you could try.
Cheers
Jarvis
hey i'm an newbie , so please take it easy on me .
i have wizard , G4 version .
i tried to flash my WM5 to WM6 ( touchflo NBD ) using the software shelltool.
so i did everything i was supposed to , installing the cabs files and on .
but when i flash to the new version , it's disconnected while saying it's finished ( finished to write the rom ) . this was after 9 minutes - and i thought that's because i have good computer .
anyway , i hard rest my wizard - but it's get stucked on the splash screen of orange with all the version of SPL IPL .
now i get real stupid , cause i didn't know what to do , so i enter to the bootloader and tried to flash again with the shelltool while my wizard at bootloader status .
right now it's in the middle of writing the new version , but it's been more than 40 minutes , i'll guess i'll unplugged the cable cause it will stay like this for hours.
is there anyway to fix what i have done ?
please help me out !!!!
i don't know nothing about fixing the wizard with bootloader and stuff, so i need an guide .
hope for an answer thnx everyone
Same happened here. How i fixed. Downloaded wizard love rom. Get into bootloader. connect cable get usb connection. no active sync needed. Flash using RUUgetinfo file from love rom folder. not using shell tool. wait till finish. reinstall both cab files and reset. now use shell tool to flash to your choice rom. give it at least half hour to run. before disconnect even if it says program not responding. hope this helps....
yeah , i did the same and it's work .
too bad i didn't see your answer before 4 hours , i didn't sleep because of that.
by the way , wizard love is WM5 or WM6 ?
i tried to flash to black diamond and to NBD but with no luck , it's never end flash even after 2 hours !!!!!
is there any way to flash without shelltool ? maybe through RUU ?
please help us getting those flash on our wizards
You can't flash with RUU on a CIDLocked G4 That's why we want it so bad (cidunlocking )
heheh alright , so how come i can flash with RUU the wizard love edition ?
and is there any way to slove the problem with shelltool program ? cause everytime i'm flashing an rom , it's never end ...
Hey everyone. I'm tearing my hair out trying to get this sorted but I just don't know what to do!
So, when I got my X1 as everyone on here should do, was flash my X1 with the HardSPL and some custom roms, this was a few months back. Then, shock! Horror! My case went and broke, (cracked near the volume button build W44) so I sent it back to SE for repair. I sent it back reset back to defaults but left the hardspl on there.
SE sent me a brand new phone (I think... This one says under the battery build w50, but the battery says w32..) I received it today. I thought it would be my old one repaired but SE had other ideas. Booted up and have Image Version: 1.03.931.10 and HardSPL 72.000 I think I said that correctly...
Now since sending it for repair and receiving it back, their seems to be quite a few wm6.5 roms floating about, and obviously I can't use the stock software as that wouldn't be right!
Now I have tried flashing the hardspl to the phone through my Vista PC and all it keeps giving me is connection errors. I thought maybe it was already flashed so I tried flashing just a rom, and that just made the phone get stuck on loading (flash by memory card). I thought it might be Vista, so I tried doing it on my other PC (XP) and I get the same issue. This bloody thing won't flash!
I have had "Connection Problems" - "Update Errors" with different numbers. The current one being Error [260] CONNECTION.
Now I have been searching around through the hardspl thread and other places trying to find out what I need to do or how I can fix it, but everything I try doesn't make a difference. I did read some other people with recently repaired phones having the same problem and perhaps SE have put a new spl thingy-ma-jiggy on there. (Please forgive the technical jargon, I have no idea what im on about.) I have also tried the ticking/unticking advanced network functionality, but that hasn't made a difference either.
So by the end of typing this, I have little hair left. Let's hope you can all help, before I have none left!
I would appreciate ANY help! Really.
Just wanted to add, I was at first getting the phone to a loading bar when flashing, but it would stay at 0% then flag up an error on the PC. Now after the tri-colour bars, the phone just sticks on Loading...
Well just to update. I have been trying to sort this since posting. I flashed the rom to an old UK generic one, as I read in another topic people had to do that before HardSPL. Done that, and tried flashing the hardspl. Same thing, just getting connection errors.
I tried going into bootloader and running the hardspl from there. It works and the phone gets to 10% and then gives an UPDATE ERROR. The phone is now bricked, and I have to reflash the original wm rom to get it back.
Though the Tricolour screen now shows 0.52.Olinex
Any ideas?
Shameless bump for help.
very stupid situation.
i have the same situation in puncto of flashing.
i get my phone three month ago.
after hardspl i .... sorry, no hardspl ... the phone says at 0% bla bla bla
i solve the problem by consulting one night absolutly stressing again and again and again .... google ... xda ... google
than 3 thinks at one time was the solution:
0. need activesync - connect !!!!
1. SDA_ApplicationUnlock.exe for desktop pc
2. enterbootloader.exe for pocketpc (please, the right version, it exist for eten too, but we need the xpediaversion ..)
3. changing registry-entries
how to:
activesync-connect, than copy "enterbootloader.exe" to pocketpc. it must be root, not sd-card. use a pocketpc-registry-program to change these values :
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001001 = 1
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001005 = 40
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001017 = 144
HKEY_LOCAL_MACHINE \Security\Policies\Policies\0000101b = 1
if not exist than add the key.
now, start desktop-program, follow instruction EXCEPT reboot.
start "enterbootloader.exe" on pocketpc. now, you can install hardspl and the device is flashable for ever.
thats works on me, hope it could help you too.
Thanks for the reply. Not had time to try it till this morning. Ok so, after spending about an hour trying to find the correct enterbootloader.exe I finally realized, that the hardspl package includes it. *Duh!* So that was time wasted.
I changes the registry values as you said with Resco registry editor, and follower the unlock then enterbootloader.exe Start HardSPL package. Starts to install. Gets to 10% then I get
ERROR [262] : UPDATE ERROR
The rom update utility has encountered communication errors during the update process.
So im open to suggestions if anyone has any. I just can't understand why it's not working. It's not a problem with my computer or cables. I flashed the phone before I sent it for repair and I have tried doing it on two computers one with XP 32bit and one with Vista 64bit.
hmm. would u like to install a custom rom, or a stock rom?
msg me, and i hope, i can halp u.
I want to have the hardspl on there so I can flash custom roms.
If it's a case of the software/firmware/hardspl whatever you call it, has been updated by SE. How would one go about getting it flashed? Would we have to wait for an update HardSPL to be released?
U read this thread?
My first hardspl was from this thread. New X1 will come tomorrow back from SE (vibration was defect +++ some more problems with case), and i will try it again with this thread.
hope, this will help u mate.
Yeah, I have been through that thread with a fine toothcombe trying everything suggested to see if I can make it work.
When you get yours back, if you have to do anything out of the ordinary to get it to flash or can't do it. Please come and let me know in this thread. If they have updated yours like mine, and yours won't flash, at least I won't be the only one!
k, i will msg u tomorrow around 2pm.
Cheers.
In the meantime. Does anyone have any other suggestions I could try?
Bump, for some help.
now i know, what is exatcly your problem.... <--- SAME Problem
i hope, i will find a solution and msg u then. if u´ll got a solution for this prob, msg me too plz.
Solution found in this Thread!
Download this and unzip it to your device. ++ run it. It will start your X1 in Bootloader menu and say "0.52.OliNex".
Then start hardspl while X1 is in Bootloadermenu....
FINISH =)
Thanks for the reply matey. Glad you got yours sorted. Just tried what you said and I get 0% then it switches to ERROR [262] : UPDATE ERROR.
vwrmic said:
Thanks for the reply matey. Glad you got yours sorted. Just tried what you said and I get 0% then it switches to ERROR [262] : UPDATE ERROR.
Click to expand...
Click to collapse
hmmm... it works fine on my new x1. are u sure, that u start the ssplmanual on your x1 and not on your computer?
Yea, im not sure what the problem was with it. Thankfully I have it done and dusted today! Because I flashed it earlier to an older official version, and you said you got it working. I presumed you had - had yours flashed to the newest version due to it being off for repair. So I reflashed the official update and fully updated it. Then tried hardspl which didn't work. Tried with the advanced USB thing off, tried again with how you said you did it above, and Viola!
Hip hip hoorah! Thanks for the help. Can finally use me bleedin phone now!
no problem mate hf with your x1
hello,
i see smilies and yea's ...
for me to understanding (for next time or other users):
1. complete official update (if exists)
2. flashing (hardspl) without "advanced usb"
thats all?
cool.
Hello,
I have a tytnII orange france radio 1.27.14.32.
I update my rom to MyPPC_MLs_K3.1_0816.zip using jump_1_56 because I can't update without it.
So the phone started normaly but the sound, camera not ok.
So I read that I must update also the radio. I downloaded the Kaiser_Radio_1.71.09.01 from http://webftp.myppc.it/index.php?dir=Kaiser/Radio/
I have found two methods :
the first is http://forum.xda-developers.com/showthread.php?t=393182
I tried it but when the phone is in the bootloader screen, he disappear and make a white page with a blue 'loading...' in the top,
I wait for 10 minutes and nothink ...
So I stopped the procedure, and the phone retart normaly with no problem.
I tried twice, the same problem.
So I start the second method, using the KAISERCustomRUU.exe, and of course jump_1_56 to get the bootloader screen with jump, so the procedure start with no problem until 99% ................. and here .............. ERROR ...
And now when I try to start my mobile phone, I have only t he bottloader screen with my old radio and STOPPPPPP.
In this point I try another time the first procedure with the sd card and radio 1.27.15.32 and nothing ...
NEED HELP PLEASE
original spl 1.81.000
try get a hammer and gently hit it as hard as you can for a couple times. here it is! you got a new radio version. i did this with my kaiser because i do not understand why i was so naive when i bought this piece of s#it!
thehou said:
Hello,
I have a tytnII orange france radio 1.27.14.32.
I update my rom to MyPPC_MLs_K3.1_0816.zip using jump_1_56 because I can't update without it.
So the phone started normaly but the sound, camera not ok.
So I read that I must update also the radio. I downloaded the Kaiser_Radio_1.71.09.01 from http://webftp.myppc.it/index.php?dir=Kaiser/Radio/
I have found two methods :
the first is http://forum.xda-developers.com/showthread.php?t=393182
I tried it but when the phone is in the bootloader screen, he disappear and make a white page with a blue 'loading...' in the top,
I wait for 10 minutes and nothink ...
So I stopped the procedure, and the phone retart normaly with no problem.
I tried twice, the same problem.
So I start the second method, using the KAISERCustomRUU.exe, and of course jump_1_56 to get the bootloader screen with jump, so the procedure start with no problem until 99% ................. and here .............. ERROR ...
And now when I try to start my mobile phone, I have only t he bottloader screen with my old radio and STOPPPPPP.
In this point I try another time the first procedure with the sd card and radio 1.27.15.32 and nothing ...
NEED HELP PLEASE
original spl 1.81.000
Click to expand...
Click to collapse
should make sure you Kaiser is "application unlocked", run SDA_ApplicationUnlock installed on your PC then copy sspl 1.56.exe to your device and run it !!!! to solve the problem on the device you must try hard reset at device (Hold Both soft keys in while pushing in Reset button :When prompted push Green Talk Button to clear data )
lexpet said:
try get a hammer and gently hit it as hard as you can for a couple times. here it is! you got a new radio version. i did this with my kaiser because i do not understand why i was so naive when i bought this piece of s#it!
Click to expand...
Click to collapse
Hei dude , you really crazy lexpet <<<< Crzy
Hakim Rahman said:
should make sure you Kaiser is "application unlocked", run SDA_ApplicationUnlock installed on your PC then copy sspl 1.56.exe to your device and run it !!!! to solve the problem on the device you must try hard reset at device (Hold Both soft keys in while pushing in Reset button :When prompted push Green Talk Button to clear data )
Click to expand...
Click to collapse
yow bro dont worry here is a thread that will set set you right its everything about radio that just helped me : http://forum.xda-developers.com/showthread.php?t=393182
thehou said:
Hello,
I have a tytnII orange france radio 1.27.14.32.
I update my rom to MyPPC_MLs_K3.1_0816.zip using jump_1_56 because I can't update without it.
So the phone started normaly but the sound, camera not ok.
So I read that I must update also the radio. I downloaded the Kaiser_Radio_1.71.09.01 from http://webftp.myppc.it/index.php?dir=Kaiser/Radio/
I have found two methods :
the first is http://forum.xda-developers.com/showthread.php?t=393182
I tried it but when the phone is in the bootloader screen, he disappear and make a white page with a blue 'loading...' in the top,
I wait for 10 minutes and nothink ...
So I stopped the procedure, and the phone retart normaly with no problem.
I tried twice, the same problem.
So I start the second method, using the KAISERCustomRUU.exe, and of course jump_1_56 to get the bootloader screen with jump, so the procedure start with no problem until 99% ................. and here .............. ERROR ...
And now when I try to start my mobile phone, I have only t he bottloader screen with my old radio and STOPPPPPP.
In this point I try another time the first procedure with the sd card and radio 1.27.15.32 and nothing ...
NEED HELP PLEASE
original spl 1.81.000
Click to expand...
Click to collapse
rom to MyPPC_MLs_K3.1_0816.zip also check the radio version the uploader who left the rom uses that can be of great help since you will know which one to use.
I have my shares of problems when i comes to this same issue so i took the time out to help you. Cheeer man
Moving to General because the Question is NOT DEVELOPMENT related.
Hello ALL and thank's for your reply,
First to restart my mobile phone I have used the mtty.exe with this manipulations :
1. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete)
kill two processes rapimgr.exe and wcescomm.exe
2. put your device into the cradle
3. Run mtty and Choose WCEUSBSH001 in 'PORT' (if it doesn't show then you didn't stop all active sync processes above!)
4. type "set 16 0" without the quotes to tell bootloader to boot the OS after reset. (for some devices it can also be "set 14 0")
5. type "task 8" to get your device formatted
6. type "task 0" to ask your device reboot
7. take the device out of the cradle, and manually reset it if it does not do that already.
founded HERE
Second problem is to update radio, I have mysteriously found a link to a ROM update of orange France, after installing iit, my radio become 1.65.16.25 with WM6.1, I wasn't satisfied with the orange rom so I tried to install the MLS K3.1,
AND NOW .... all it's ok, sound, photo, bluetooth.
One more question please : do you think that I use my mobile with this radio or it's better to me to update it to 1.71.... is there a very difference or no ???
Link to ROM Orange France wm6.1 August 2008 HERE
Hello,
now I have another problem, I think that it's big one, I think that it's a big one, I explain.
I tried to install a new dialer, so I installed it into the phone, the phone restart ... and now nothing, he reboot continually.
I tried mtty with set 16 0, task 8, after task 0, and here he doesn't boot, I see the orange logo with the r ... g ... B .... in the left down and here STOP.
I tried Hard reset, 100 % ok BUT NOW I see only logo of Orange but not radio version, from version, nothing only the Orange logo.
So I flash with the original ROM of Orange, all is ok until 100 % but the same, he reboot, I see orange logo, 5 seconds after he rebbot another time, Orange logo, 5 seconds, reboot ....
Please help me to resolve the problem.
after 5 minutes without battery, I get the information in the left down and the mobile start with the WM6.1.
So I can't install a new dialer :-((
Thank's a lot
thehou said:
Hello,
now I have another problem, I think that it's big one, I think that it's a big one, I explain.
I tried to install a new dialer, so I installed it into the phone, the phone restart ... and now nothing, he reboot continually.
I tried mtty with set 16 0, task 8, after task 0, and here he doesn't boot, I see the orange logo with the r ... g ... B .... in the left down and here STOP.
I tried Hard reset, 100 % ok BUT NOW I see only logo of Orange but not radio version, from version, nothing only the Orange logo.
So I flash with the original ROM of Orange, all is ok until 100 % but the same, he reboot, I see orange logo, 5 seconds after he rebbot another time, Orange logo, 5 seconds, reboot ....
Please help me to resolve the problem.
Thank's a lot
Click to expand...
Click to collapse
try for radio upgrades, maybe it can help you! you can look here ===>> http://forum.xda-developers.com/showthread.php?t=393182 try to continue and do not despair
Hakim Rahman said:
try for radio upgrades, maybe it can help you! you can look here ===>> http://forum.xda-developers.com/showthread.php?t=393182 try to continue and do not despair
Click to expand...
Click to collapse
Salam, thank's for your response
From the last install of dialer and the bug of reboot, I have reflash my tytnii correctly BUT the problem that I have now is when my sim card is installed, the phone reboot systematically.
If I leave the simcard in the phone but I start with the Off line mode, it's ok, Just I change the mode to telephone here .... reboot ...... what the dialer have made in my phone ???????
thehou said:
Salam, thank's for your response
From the last install of dialer and the bug of reboot, I have reflash my tytnii correctly BUT the problem that I have now is when my sim card is installed, the phone reboot systematically.
If I leave the simcard in the phone but I start with the Off line mode, it's ok, Just I change the mode to telephone here .... reboot ...... what the dialer have made in my phone ???????
Click to expand...
Click to collapse
I think you get caught by Simdoor issue ...! try to search for sim unlock program for kaiser and install on your PC !!! You can find it here -->> http://forum.xda-developers.com/showthread.php?t=375583
HELLO
i'm going crzay from the hspl
the auto flash dosn't work
and the manual flash file when i run it the device is lag
so i get into the bootloader by pressing volum down and power then realese
and i start the manul flahs then here is the 7 pictures i put it in zip file cu they more than 4 file
hope we fix the proplem
plz
plz
plz
help
SYRIAN4E said:
HELLO
i'm going crzay from the hspl
the auto flash dosn't work
and the manual flash file when i run it the device is lag
so i get into the bootloader by pressing volum down and power then realese
and i start the manul flahs then here is the 7 pictures i put it in zip file cu they more than 4 file
hope we fix the proplem
plz
plz
plz
help
Click to expand...
Click to collapse
Might have been more help asking in the hspl thread but nevermind . Try a different cable (most mini usb cables will do)
SYRIAN4E said:
HELLO
i'm going crzay from the hspl
the auto flash dosn't work
and the manual flash file when i run it the device is lag
so i get into the bootloader by pressing volum down and power then realese
and i start the manul flahs then here is the 7 pictures i put it in zip file cu they more than 4 file
hope we fix the proplem
plz
plz
plz
help
Click to expand...
Click to collapse
no need to go crazy, this can be fixed.
you shouldn't enter the bootloader yourself, it won't flash that way.
what error did it say in automatic mode?
syrian
tha messeage talk about turning off my firewall
and the server is off
and this is my first hspl
SYRIAN4E said:
tha messeage talk about turning off my firewall
and the server is off
and this is my first hspl
Click to expand...
Click to collapse
ok did you turn firewall off? turn proxy off too, if you have a proxy.
if that doesn't sort it, I can still help you if you message us via this link: http://support.htc-unlocks.com/
syrian
i change the usb and disable the proxy and turn off all my firewall and antivirus
i think the proplem from something lagging from the hspl software
cuz i enter the bootloader and i start manual flash and it's respond and show to me the update button and i press it and tell my software version and if i wanna change to oilnex version and i press it and show to me the percentage image on the pc and in the phone then i wait then nothing happend
SYRIAN4E said:
i change the usb and disable the proxy and turn off all my firewall and antivirus
i think the proplem from something lagging from the hspl software
cuz i enter the bootloader and i start manual flash and it's respond and show to me the update button and i press it and tell my software version and if i wanna change to oilnex version and i press it and show to me the percentage image on the pc and in the phone then i wait then nothing happend
Click to expand...
Click to collapse
you shouldn't enter the bootloader like that, the flash won't work that way.
I replied to your priv. message
syrian
is there any hope CHECK THE PICTURE
1st - the cable is work well cuz i update the device with it from the offical htc website
2nd- the picx
3rd- i run the EXE in the device and it SHOW TO ME THIS MESSAGE : Lic OK
4TH- I START THE manual FLASH
2nd- more INFO
RED LINE : TOPA100 32M
SPL-2.51.0000
MicroP-Topaz (LED) V10
TURBO HW/TURBO SW
GREEN LINE : TP MFG DATA
502,547 170,876
173,200 834,210
828,869 Calibrated
BLUE LINE : E M P T Y
WHITE LINE : U S B
SYRIAN4E said:
is there any hope CHECK THE PICTURE
1st - the cable is work well cuz i update the device with it from the offical htc website
2nd- the picx
3rd- i run the EXE in the device and it SHOW TO ME THIS MESSAGE : Lic OK
4TH- I START THE manual FLASH
2nd- more INFO
RED LINE : TOPA100 32M
SPL-2.51.0000
MicroP-Topaz (LED) V10
TURBO HW/TURBO SW
GREEN LINE : TP MFG DATA
502,547 170,876
173,200 834,210
828,869 Calibrated
BLUE LINE : E M P T Y
WHITE LINE : U S B
Click to expand...
Click to collapse
the screenshots are very helpful in seeing what your problem is.
ok, after 3rd step now try copying Manual SSPL exe (link: http://forum.xda-developers.com/attachment.php?attachmentid=232407&d=1254155476) on the phone, run it, it should then show SSPL screen on the phone. then use the Manual flash mode on the PC. let me know if it works that way
syrian
the device get LAG when i launch the manual sspl and i start manual flash even whene it's lag
and here is the picture
SYRIAN4E said:
the device get LAG when i launch the manual sspl and i start manual flash even whene it's lag
and here is the picture
Click to expand...
Click to collapse
what do you see on the phone screen at this point?
syrian
nothing just the file maneger when i launch the manual sspl cuz the device lag
SYRIAN4E said:
nothing just the file maneger when i launch the manual sspl cuz the device lag
Click to expand...
Click to collapse
ok you did step "3rd- i run the EXE in the device and it SHOW TO ME THIS MESSAGE : Lic OK"
and then you run the manual sspl EXE on the phone, it still lags ?
I'm asking to make sure you did not do a hard reset or anything (I mean, don't do hard reset)
syrian
i just did it in ever way that you can imagine
and i think that the manual is the proplem i'm sure
is ther any hspl type haha we can use
SYRIAN4E said:
i just did it in ever way that you can imagine
and i think that the manual is the proplem i'm sure
is ther any hspl type haha we can use
Click to expand...
Click to collapse
ok one last check.. send me a screenshot of your phone showing the IMEI to make sure it's OK.
but do not post the screenshot publicly, send it in private message.
syrian
come on xda help me lol
SYRIAN4E said:
come on xda help me lol
Click to expand...
Click to collapse
alright I realized that the second file was the wrong version. I sent you the correct file in PM, let me know if it worked
syrian
OMG it's WOrk good
thanks a LOT for you
i own you
LOT
LOOK how much time it take to fix this proplem LOL
now i have another proplem and it is if you won't
is how to download the duty or energy rom cuz they are upload on HOTFILE and RAPIDSHARE LOL
and i thanks for the second time and love to know what was the prolem
SYRIAN4E
SYRIAN4E said:
OMG it's WOrk good
thanks a LOT for you
i own you
LOT
LOOK how much time it take to fix this proplem LOL
now i have another proplem and it is if you won't
is how to download the duty or energy rom cuz they are upload on HOTFILE and RAPIDSHARE LOL
and i thanks for the second time and love to know what was the prolem
SYRIAN4E
Click to expand...
Click to collapse
glad to help. as I said, the manual SSPL in the thread was the wrong version. I forgot to update it at one point, will add it in the thread now. (most people can just go and use automatic mode so nobody noticed there was an issue with the file.)
Hi all
I really need some help please!!
I think I have read and searched and tried steps by step all the posts and threads on this, none of them work for me,
Ive flashed my HD2 & TD2 with HSPL, radios and roms many times in the past. I have a stock rom on my TD2, (havent flashed a cooked one yet but did on my HD2 and worked great),
the problem is when I try flash anything, (HSPL,Radio's and Roms)
I connect with WMDC on windows ultimate 64x and go through all the steps, the phone disconnects from WMDC when loading the tri-color screen, and installs the HTC sync drivers fine, and then (my problem) it hangs on 0%. this happens regardless of what I'm flashing after a while brings up the communication errors 208 & 260. this doesnt have any effect on the software HSPL or radio as a soft reset returns back to the homescreen just fine. I am running HSPL 1.8.3. , radio 4.49.25.17 and a shiped stock wm 6.5.
This is what Ive tried so far:
I have used 3 different micro USB cables,
updated my .net fx to 4.1
I have tried different Ruu's such as custom Ruu, Ruu from topaz, Ruu, supplied with Hspl, flashes center and KaiserCustomRUU.exe and a few others.
Ive tried the white screen fix many times. including the SDA unlocker and stuff.
I ve tried manual and automatic.
tried entering the the Tri-color screen manually and via the Ruu.
I tried different computers and different operating systems (W7ultimate and XP 32Bit and 64Bit)
tried active sync WMDC 6.0 and 6.1
Ive removed the SD card and sim and have tried flight mode
Restarted pc's mobile any reinstalled WMDC many times.
Ive tried renaming to the HSPL, radio and Rom to TOPAIMG.nbh , put 1 by 1 on formated fat32 SD card, run from Tri-color menu. all of them just hang on
loading....
Have tried mixing and matching Ruu's with HSPL's, Roms And radios and everything else i can think of, after 18 hours of this I am fed up and decided i need some help
Thanx in advance
ok
i have now download the official RUU_Topaz_S2_HTC_WWE-AFK_2.53.421.3_Radio_Signed_Topaz_61.44etc.25.35_4 .49.25.91_Ship.exe Rom
and it worked with no problems.
it updated my HSPL from 1.83 to 2.51 and radio version to 4.49.25.91 which was exactly what i was going for.
The problem now is that i still cant change my HSPL, RADIO or flash a custom Rom which is what I need. it hangs on 0% and now gives me a 262 error which states that:
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. If this happens, you can just soft reset the device and run RUU again. The update process will then continue. At this stage the rom on the device is incomplete and it will not boot back up into Windows. You will need to place it into the bootloader to continue.
which is not true as if a reboot it doesn't continue the update and just returns to the home screen as normal
help?