Hey guys, When i use my (stock) Dutch rom with osKitchen i get the error:" error while importing rom file: Can't extract files or build packages from IMGFS structure. Please make sure that the rom is not corrupted, blablabla." how do i fix this?
Related
How i can extract ROM files from *.nbh files? It is original HTC ROM for Kaiser... Thanks for any help. Best regards...
try reading the wonderful
thing called the Wiki
Hey there
I would like to backup my current stock rom on my Blackstone.. What i have done so far is to dump the rom i think? i have used Itsutils to create part00.raw up to part04.raw which means 4 files.. Now i would like to build those together to make a single flashable file .. But how to do this ?
Thanks !
~D
The guide is still pending here: http://forum.xda-developers.com/showthread.php?t=450565&highlight=Reconstruct
Check out the links in his sig for Kaiser and Raph ROM Reconstruction, and try and figure it out
There might be something on the wiki also.
Ta
Dave
I've used the same procedure and it works,
use the Blackstone Kitchen from http://forum.xda-developers.com/showthread.php?t=438456,
copy your raw files in the baserom folder and a reference stock rom (RUU_signed.nbh file) (I don't know what's taken from this file but you need it)
then launch the "BlackStoneKitchen.cmd" and extract the content (e,b), then re-cook it (c,a) and it's done.
Hi,
a few days ago I have flashed the latest radio on my device. This was 52.57.25.30u. Now I have cooked a new rom and flashed it. I had to realize that my radio was overwritten again (with the old "1.10.25.25").
So, I think the radio is included in the rom image. Is there a way I can include the 52.57.25.30u radio in my rom, so everytime I flash my rom I will have the 52.57.25.30u radio?
Best regards
johnpatcher
johnpatcher said:
Hi,
a few days ago I have flashed the latest radio on my device. This was 52.57.25.30u. Now I have cooked a new rom and flashed it. I had to realize that my radio was overwritten again (with the old "1.10.25.25").
So, I think the radio is included in the rom image. Is there a way I can include the 52.57.25.30u radio in my rom, so everytime I flash my rom I will have the 52.57.25.30u radio?
Best regards
johnpatcher
Click to expand...
Click to collapse
I assume you mean the 1.09.25.14 stock radio that came with pretty much all HD devices up to this point.
What you need to do is download the Blackstone kitchen and the attached that jcespi2005 posted here. http://forum.xda-developers.com/showpost.php?p=3171703&postcount=94
You need to rename the .nbh file to Ruu_Signed.nbh and place the .nbh file in the BaseROM folder of the kitchen.
Next run BlackStoneKitchen.cmd and choose the option e to extract a ROM.
Next select a. This should then extract all the files you need. The OS.nb is the ROM that you need and the 00_unknown.nb is the radio it should be around 21,000,000kb.
Use the HTCRT.exe to compile the new .nbh that you want. Open the HTCRT.exe in the tools folder of the kitchen. Note: Make sure that you downloaded the updated HTCRT.exe that jcespi2005 posted to compile flashable nbh files.
Select blackstone from the drop down menu. Open the OS.nb file in the HTCRT.exe program and then radio of your choice, in this case 1.09.25.14. Open the 00_unknown.nb with the HTCRT.exe. Build your new .nbh. Note: I always just name the new .nbh to BLACIMG.nbh so you can flash for a microSD card.
Ok, I have tried htcrt already, but not the updated version. Thanks a lot!
johnpatcher said:
Ok, I have tried htcrt already, but not the updated version. Thanks a lot!
Click to expand...
Click to collapse
I hope it all works out for you. Please let the community know if it works for you!
I have another problem: I have a self-cooked rom (with the "old" radio included). Now I want to put in the "new" radio.
I have extracted the new radio to an nb file (using the kitchen) and have a nb file of my rom. After putting them together with htcrt tool my nbh file is too big (about 20 megabytes), so I think there are now two radios included (the old and the new one).
How can I delete the old one out of my nb file?
If you simple extract your rom with the kitchen and rebuild it, you'll have the same rom without radio inside. Then you can add the new radio.
Hi there, I am trying to create a nbh file from 4 dump files. This ROM is missing in this forum and it is a stock ROM version 1.14.488.3 for middle east. I would like to share it with you and add it to the wiki page.
Now that i got my 4 raw files Part00/01/02/03.raw I downloaded the ROM kitchen. After 3 days of non stop reading, I have a few questions :
* It seems that I need also the ruu_signed.nbh file to make a ROM from dump ? (Please correct me if I am wrong). Why ?
* Can I use kwbr_ruu_signed_WWW_1.19.zip to cook 1.14 ROMs ??
* If not, where can I find the 1.14 ruu_signed_WWE.nbh file ?
* Using DUMP files from 1.14.488.3 and nbh from another 1.14 version will give me which version ? the 1.14.488.3 or the other ?
I tried to use the nbh from official ROMs and that did not help as it seems to be locked I believe which is expected.
Any help would be very apperciated. I hope to create the ROM successfully as there where lots of people asking for it on many forums.
Thanks !
BUMP
another shamless bump
To my knowledge official roms arn't protected, i think all you need to build the dump is part01/part02
you shouldnt need ruu_signed aswell as the part files so just put the 2 part files into the baseRom folder of the Kitchen(may be different depending on what kitchen your using) and run the .bat file to start
goto option extract ROM and then choose the second option(you should see Part01/Part02 mentioned),
if it doesnt make sense to you ill try and explain better but atleast something for you to get started on.
sgilesuk said:
To my knowledge official roms arn't protected, i think all you need to build the dump is part01/part02
you shouldnt need ruu_signed aswell as the part files so just put the 2 part files into the baseRom folder of the Kitchen(may be different depending on what kitchen your using) and run the .bat file to start
goto option extract ROM and then choose the second option(you should see Part01/Part02 mentioned),
if it doesnt make sense to you ill try and explain better but atleast something for you to get started on.
Click to expand...
Click to collapse
BlackStone ROM Kitchen -- Extraction Menu
-------------------------------------
(a) if you want just to extract a shipped ROM
(RUU_signed.nbh required in BaseROM folder)
(b) if you want to rebuild and cook dumped ROM into flashable ROM
(RUU_signed.nbh, dumped part01.raw and part02.raw required in BaseROM folder)
(m) back to the main menu
(x) exit
Any explanation anyone ?
Trying to dump a rom for customization using KovskyKitchen
at first no problems executing KovskyKitchen.CMD
choosing extract a rom then extract shipped rom.
cot a RUU_signed.nbh in base rom.
after a wile there is a OS.NB file and in the root there are the
oem sys and rom files.
and then it goes wrong i get a breef message file not fount?
and by file moving from the dup directory to al the rom sys oem dirs
i get error messages in dutch so free translation
error to file, file not fount
leaving me with almost epty dir's
am i doing someting wrong or do i have to fix someting.
hoping for help.
thank in advance jasper
redhatjasper said:
Trying to dump a rom for customization using KovskyKitchen
at first no problems executing KovskyKitchen.CMD
choosing extract a rom then extract shipped rom.
cot a RUU_signed.nbh in base rom.
after a wile there is a OS.NB file and in the root there are the
oem sys and rom files.
and then it goes wrong i get a breef message file not fount?
and by file moving from the dup directory to al the rom sys oem dirs
i get error messages in dutch so free translation
error to file, file not fount
leaving me with almost epty dir's
am i doing someting wrong or do i have to fix someting.
hoping for help.
thank in advance jasper
Click to expand...
Click to collapse
yep fount it in KovskyKitchen.CMD
rename boot.rgu naar boot_ms.rgu.
this goes a bitt better.